Hi community,
this is my first thread and i hope my english is good enough to explain my problem.
I want to use my Diamond as a Navigation System for my bicycle. Problem is that the phone is lying in a case on my tank and the drive vibration is touching the display.
Im looking for a tool which locks the display without switching it off. It shoukld be only activate in TomTom Menu.
Hope u understand.
Hi
Touchlockpro can do that
Its got lots of options but you could set it so it unlocks only when the stylus is out or you swipe the capacative pad with your finger
it does not use the windows lock it just locks the keys and screen press's
C.
Related
Ok this may be a dumb question but I have been searching for the answer and can not find it any where. I want to unlock and have the screen come on( comeout of standby) by sliding the keyboard out.
Like when you flip out the screen on the side kick.
I have the 2.17 custom rom by xelencin if that helps.
Thanks
I really want that feature too!
To add a same thing to your question, can i unlock the machine with one hand?
I have smartkey installed but everytime i try to unlock the screen, it said I have to press Unlock, and there is no way to press it with a softbutton, i have to either do it with a stylus or the keyboard....
baraider said:
To add a same thing to your question, can i unlock the machine with one hand?
I have smartkey installed but everytime i try to unlock the screen, it said I have to press Unlock, and there is no way to press it with a softbutton, i have to either do it with a stylus or the keyboard....
Click to expand...
Click to collapse
why not use your thumb?
huangyz said:
why not use your thumb?
Click to expand...
Click to collapse
and leave fingerprint smurk on the screen you mean?
The only problem I could see with sliding to turn on / unlock etc is that the magnetic catch on the standard case would then activate the switch on etc... I'm sure it would be possible to intercept this trigger in some way even when the OS is in standby but I can see issues with the device turning on when used with the standard case...
The screen doesn't rotate when you open the keyboard until aftr the device is turned on, which suggests to me that the position of he keyboard isn't monitored by the device when it's switched off. If this is the case ten it would be impossiblt to have the keyboard switch turn the device on.
Correct me if I'm wrong.
Yep, pretty sure sliding the keyboard out does not create a wakeup event. It is possible that something like MortSaver could be used to mimic this function - that's a program that turns off the screen and locks the buttons when you press a hotkey - i.e. it doesn't put the device into standby, it just kinda puts it into low power mode. I'm pretty sure that could be rewritten to turn the screen back on when the keyboard slides out. Perhaps if you plead with the author...
I Have gone straight from the Orbit2 to the Diamond2 however I seem to have a small problem with the device lock that i used to have on the front screen as it only works if i disable the touchflo3d homepage that i kind of like.
Anyone have any ideas/suggestions/3rd party screen locks that are practical?
PS. had the phone 2 days and not really had time to read manual thoroughly etc so if there is a really simple response to this then I apologize
try holding the end call button for a few seconds
Thanks. Am guessing that was in the manual but must have missed it in skim reading it.
not sure mate i don't read the manuals either i just asked the same question on the TD1 haha
I was also very disappointed by missing LOCK option - thanks, maybe next time, i could at least download that manual from HTC
db_darryl said:
I Have gone straight from the Orbit2 to the Diamond2 however I seem to have a small problem with the device lock that i used to have on the front screen as it only works if i disable the touchflo3d homepage that i kind of like.
Anyone have any ideas/suggestions/3rd party screen locks that are practical?
PS. had the phone 2 days and not really had time to read manual thoroughly etc so if there is a really simple response to this then I apologize
Click to expand...
Click to collapse
TouchLockPro works on the Diamond2, it unlocks by light sensor and taking stylus out.
you can set long press of the end call button to lock screen "settings/personal/buttons/end key tab.
Anyway to set the TD2 to switch on by pressing any of the 4 bottons? Now mine is only able to be switched on by pressing the on/off button.
This lock the device automatical everytime when the backlight goes off.
HKEY_CURRENT_USER\ControlPanel\BackLight
AutoDeviceLockEnable from 0 to 1
After change no softreset is needed.
No way to activate the screen with the call/start/arrow/end call button?
you can use smart lock, it is free and very good.
How does one change the lock time?
I've set it but can't now access the time setting - I've read the manual and still no clue.
Tony
Just got the diamond2 and am loving it. Came from the touch pro. Problem is I have been pocket dialing while its in my leather case. This is not good, as I am a real estate salesperson and it is calling some important people. Does anyone have a solution? BTW, I was using touch lock pro on the touch pro.
Thanks!
hi lorettaboy
you should lock the kets by holding the end call button for a few seconds and that should sort your problem out
I forget what it's called but there is this locking software that will completely lock the phone if you rotate it around the long axis one way and unlock if you do the same the other way.
I have been using throttle lock though. It is like the Android unlock screen where you draw patterns.
If u press the power on/off button for a second, the screen goes off.....isnt it ok to avoid your problem?
Kinto said:
If u press the power on/off button for a second, the screen goes off.....isnt it ok to avoid your problem?
Click to expand...
Click to collapse
I think what may be happening is that the power button is being pressed while in the case unlocking the phone and keys. I had this happen before and still does sometimes when in my pocket.
4 characters: S2U2
Hoping wm6.5 features a lock that's as functional as S2U2.
I personally use http://pocketshield.netserver01.com/ It locks your phone when its closed, and you have different ways to 'wake' it. the 3 that I set it currently is:
1. if the phone is in the case (aka dark) it will not unlock even if phone is ringing, but once you remove it from the sleeve/pouch it will be unlocked.
2. If its night time and the above prevents you from unlocking in the night, shaking phone left to right once will unlock it
3. lastly if I take out stylus it will unlock.
lorettaboy said:
I was using touch lock pro on the touch pro.
Click to expand...
Click to collapse
Googled it, light sensor lock sounded interesting, tested it. Never got the light sensor unlock to work. Had to keep tapping the lock button for a varying number of times to unlock. But worse: got catch-22-ed twice within ten minutes.
The first time I got caught with the screen on, the 'turn off' dialog active, and Touch lock Pro active but not clickable because of the turn off dialog. No way to unlock the device and the power button was hijacked by Touch Lock Pro. Removed back cover, took out battery and restarted.
The second time the device locked with the screen off, and the power button couldn't turn the screen on again. No way to find out what happened this time. Removed back cover, took out battery and restarted.
This tool is possibly the least compatible tool with the TD2 you will ever find
Hi,
Does anyone know how to do this or can write a quick cab file to do this?
I want to be able to tap the X1s screen to wake it up (light up) when not in lock mode. Rather than having to push a button. The p1i used to do this.
Would be great to know if this is possible.
Thanks
Darren
cab's are just installers for programs
fear you maybe the only one who would want this app
as
1. it would turn on in everybody's pockets
2. having the screen register tabs would only work if the phone was not suspended and just blanked the screen in which case it would use waaaay more battery then when normally suspended and run out of batt pretty quick
valid points.
On the p1i it only woke up if it wasnt locked. So it could be the same here. Only when phone is unlocked and screen has turned off.
How does the p1i enable to the wake up when unlocked without draining all the power. The screen is not just blanked, its actually off.
Sorry that question is to anyone that may know.
Thanks
maybe differences in hardware and os
with windows mobile suspended anything but notifications and calls /sms's are normally turned off but some apps seem to work or at least block the real suspense to take place
like wmplayer
I'm finding it quite difficult to turn on the screen of my XZ1C without unlocking the phone...
Sometimes I just want to look at the lock screen without the phone unlocking, but the fingerprint scanner reacts so quickly that the lock screen (along with any notifications) is gone before I've even read the time!!
Is there a way to set a delay (probably not) or set another button (vol? camera?) to wake up the screen without unlocking the phone? I'd rather not have to disable the fingerprint scanner, and I never had this issue with my Z5C.
Seriously?
People complaining about the fp-scanner being too fast nowadays?
As for solutions, you could always use a finger where you haven't stored the print.
Or use your fingernail to press the button.
4rz0 said:
Seriously?
People complaining about the fp-scanner being too fast nowadays?
As for solutions, you could always use a finger where you haven't stored the print.
Or use your fingernail to press the button.
Click to expand...
Click to collapse
That's what I'm doing - it's a bit awkward! On the Z5C there was just enough time to remove your finger before the phone unlocked so you could have a quick glance at the screen. It must use more battery to fully wake up the phone everytime the power button is pressed?
I guess "tap to wake" would have been another solution to my (admittedly small) problem.
Oh, come on now. Fast fingerprint scanner is a good thing. There shouldn't be such thing as too fast. I would simply "reserve" my middle fingers for checking the lock screen.
Even if I use the "wrong" finger, the lockscreen bounces to the left because it's tried reading the fingerprint which is also annoying when all I want to do is check the time and for any notifications!
a novel approach i just set up: when scanning your thumb, only scan the pad and not the tip. then you can use the pad to unlock and the tip to check the lock screen.
(doesn't fix the problem of the bounce tho)
Use this app: https://play.google.com/store/apps/details?id=com.jarsilio.android.waveup
Just wave your hand over the proximity sensor and the screen will turn on but won't unlock the phone if you have a lock.
Don't enable the lock screen functionality though, it doesn't support fingerprint unlock.
Lol why don't u just use a another finger?
Dany XP said:
Lol why don't u just use a another finger?
Click to expand...
Click to collapse
See post #5...
hbkid said:
I'm finding it quite difficult to turn on the screen of my XZ1C without unlocking the phone...
Sometimes I just want to look at the lock screen without the phone unlocking, but the fingerprint scanner reacts so quickly that the lock screen (along with any notifications) is gone before I've even read the time!!
Is there a way to set a delay (probably not) or set another button (vol? camera?) to wake up the screen without unlocking the phone? I'd rather not have to disable the fingerprint scanner, and I never had this issue with my Z5C.
Click to expand...
Click to collapse
look on the Play Store for Power Button to Volume Button by TeliApp, the app is old but still works and will allow you to use the volume down button as a second screen on button. it reverts back to being a normal volume down button once the screen is on. no root required. (I would post a link but XDA won't let me because I'm a new user)