Related
Did someone hAve successfully install and setcpu on the grab?
Sent from my PC36100 using XDA App
chpimentelpr said:
Did someone hAve successfully install and setcpu on the grab?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Setcpu is not set up for the tegra 2 yet. There aren't any kernels that allow overclocking yet.
But you can use it to increase the minimum clock (this can also be done via command line)..
thebadfrog said:
Setcpu is not set up for the tegra 2 yet. There aren't any kernels that allow overclocking yet.
Click to expand...
Click to collapse
Hi, I'm using aAa kernel+PrimeHD and I did this:
http://forum.xda-developers.com/showthread.php?t=1020313
OC guide... I put
# x8 overclock
insmod /system/lib/modules/x8oc.ko
sleep 2
echo x27 > /proc/x8oc
and now my phone doesnt start... when I connect it, a green led flashes for a while, and then it stops xD.
what can I do? am I screwed? thanks.
NVM, turns out that none of the changes were applied LOL!
I don't know why that happened xD, now it's ok.
But I still have the question... what freq should I use? and how can I be sure of that? any app?
thanks
nvm.
sebasura said:
Hi, I'm using aAa kernel+PrimeHD and I did this:
http://forum.xda-developers.com/showthread.php?t=1020313
OC guide... I put
# x8 overclock
insmod /system/lib/modules/x8oc.ko
sleep 2
echo x27 > /proc/x8oc
and now my phone doesnt start... when I connect it, a green led flashes for a while, and then it stops xD.
what can I do? am I screwed? thanks.
NVM, turns out that none of the changes were applied LOL!
I don't know why that happened xD, now it's ok.
But I still have the question... what freq should I use? and how can I be sure of that? any app?
thanks
Click to expand...
Click to collapse
sure about what??
flash mode??
You don't need to add anything! You have OC built into nAa kernel. Just use setcpu or from cyanogenmod settings.
Sent from my MB860 using xda premium
NIMBAH said:
You don't need to add anything! You have OC built into nAa kernel. Just use setcpu or from cyanogenmod settings.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Also custom kernels don't use x8oc.ko you know.
Sent from my MB860 using xda premium
installed as it should be. flashed to alfs rom, installed ginger dx v028, then installed alfs update patch and it seems to work fine.. Fresh install and after entering settings happens strange things, sometimes loading facebook app is just the same. Screen attached. Anyone know how to fix this? Never happened with earlier gingers on stock rom.
The thing is.. you have to touch a bit left of buttons, as the touch matrix is in correct position, but the graphics a float to the right. If i did not reboot, it floats more and more.
any help appreciated
*facepalm*
Sent from my E15i using xda app-developers app
Chris95X8 said:
*facepalm*
Sent from my E15i using xda app-developers app
Click to expand...
Click to collapse
thank you for a constructive colaboration..
anyone else who's too smart for me, please don't bother writing smiles..
This is "screen cut" !
Change governor to smartassV2!
It's bug in alfs if is yours governor ondemand!:cyclops:
change governor and cpu speed anything but 691
ngoralph said:
change governor and cpu speed anything but 691
Click to expand...
Click to collapse
thank you both!
any help on changing governor would be appreciated link? google doesn't find answers
Majklas said:
thank you both!
any help on changing governor would be appreciated link? google doesn't find answers
Click to expand...
Click to collapse
GH, dragons ahead did the trick
thank you very much for debugging!
Majklas said:
thank you both!
any help on changing governor would be appreciated link? google doesn't find answers
Click to expand...
Click to collapse
Go to Settings aplication and then go to CyanogenMod settings/Performance/CPU Settings/Available governors and choose Smartassv2 from that list
Sent from my E15i using xda app-developers app
Godra said:
Go to Settings aplication and then go to CyanogenMod settings/Performance/CPU Settings/Available governors and choose Smartassv2 from that list
Sent from my E15i using xda app-developers app
Click to expand...
Click to collapse
hmz, after reboot i still get the screen cut.. but i changed to smarass v2 and 746mhz
Majklas said:
hmz, after reboot i still get the screen cut.. but i changed to smarass v2 and 746mhz
Click to expand...
Click to collapse
Then reflash rom and kernel! Strange problem :silly:
Majklas said:
thank you for a constructive colaboration..
anyone else who's too smart for me, please don't bother writing smiles..
Click to expand...
Click to collapse
Thank you for not using the search feature and spamming our forums.
Sent from my E15i using xda app-developers app
2010matej said:
Then reflash rom and kernel! Strange problem :silly:
Click to expand...
Click to collapse
heh, the thing is.. after reboot all the settings get back. The set cpu setting at bootime is disabled
Majklas said:
heh, the thing is.. after reboot all the settings get back. The set cpu setting at bootime is disabled
Click to expand...
Click to collapse
You must to click in performance settings "set on boot" !
yes
Majklas said:
heh, the thing is.. after reboot all the settings get back. The set cpu setting at bootime is disabled
Click to expand...
Click to collapse
Please atleast check what all features you're phone provides you..
And read the bug log in the rom's thread b4 using any rom or kernel..
Now for you're problem go to performance settings as you did b4 change governor as b4
(recommended 600mhz smartassv2 overclocking will drain battery and is not good for cpu) (overclocking cpu means when you push you're cpu beyond its default limits, ours have 600mhz)
and at the bottom last option would be to "set on boot" just click on the box beside, it will be checked..
Now you shouldn't have any question, i guess..
downloaded set cpu, but it wount clock more than 1500ghz.. i read someone said the 4x is overclockable. right?
tonymb91 said:
downloaded set cpu, but it wount clock more than 1500ghz.. i read someone said the 4x is overclockable. right?
Click to expand...
Click to collapse
Not sure how you can overclock the CPU without access to a custom kernel, which requires an unlocked bootloader.
SimonTS said:
Not sure how you can overclock the CPU without access to a custom kernel, which requires an unlocked bootloader.
Click to expand...
Click to collapse
Exactly what you said. Underclocking yeah. Overclocking nope.
Sent from my LG-P880 using xda app-developers app
Maaan overclock?!? Oooh...oh I get it, I get it, winter is coming and you need heater :silly:
nedooo said:
Maaan overclock?!? Oooh...oh I get it, I get it, winter is coming and you need heater :silly:
Click to expand...
Click to collapse
you got it;D nono,just woundering
Lol, OC tegra 3 cpu? It's mean you have a portable fireplace
Sent from my LG-P880 using xda premium
SimonTS said:
Not sure how you can overclock the CPU without access to a custom kernel, which requires an unlocked bootloader.
Click to expand...
Click to collapse
no, you don't need a custom kernel, BUT you've got to have a module that 'replaces' the 'cpu-clock-module' (don't know how it's named ), which is in the kernel, at boot that way, doixanh made it possible to overclock the sony ericsson xperia x8
to the point, please someone take a look at my attachment. this's Xperia V.
*last changed i had before :
-updated to .140, and flash vKernel, removed bloatwares, installed init.d via PimpMyRom, use intellidemand gov.
Any chance you could tell us which file and which process/app was trying to open it?
gregbradley said:
Any chance you could tell us which file and which process/app was trying to open it?
Click to expand...
Click to collapse
see attachment,buddy.
thats screenshot i taken from catlog. it something like cant access/open files from interactive gov's folder at /sys/device/system/cpu/cpufreq/
when i take a look at that error (/sys/device/system/cpu/cpufreq), it doesnt have folder named interactive.
i think this path is telling 'what' governor are im using now.
now, i think i resolved my own problem
the problem is that when i change governor besides interactive (default V's governor), that error will appears continuously at catlog.
andrasandhi said:
see attachment,buddy.
thats screenshot i taken from catlog. it something like cant access/open files from interactive gov's folder at /sys/device/system/cpu/cpufreq/
Click to expand...
Click to collapse
The screen shot does not show that, so that doesnt help
andrasandhi said:
when i take a look at that error (/sys/device/system/cpu/cpufreq), it doesnt have folder named interactive.
i think this path is telling 'what' governor are im using now.
now, i think i resolved my own problem
the problem is that when i change governor besides interactive (default V's governor), that error will appears continuously at catlog.
Click to expand...
Click to collapse
OK, its all sorted now then
How are you setting governor?
Looks like that app doesn't have root permissions...
Sent from my LT30p using Tapatalk 2
mpiekp said:
How are you setting governor?
Looks like that app doesn't have root permissions...
Sent from my LT30p using Tapatalk 2
Click to expand...
Click to collapse
Of course i have root.
im using doom's kernel and installed superSU after flashing .140 ftf.
if i dont, i cant change the governor.
take a look again properly this SS (see this post attchmnt), its weird.
i dont have this problem before when i changed governor.
it happen when i change other governors EXCEPT interactive.
for now, that continuously error dissapeared bcoz use interactive gov.
Yes that was my point, the governor is not actually changing, hence the reference to interactive whilst using another governor.
Do you have any init scripts running?
Sent from my LT30p using Tapatalk 2
mpiekp said:
...........the governor is not actually changing, hence the reference to interactive whilst using another governor.
Click to expand...
Click to collapse
oh, really?
now i remember ive installed PimpMyRom before, just to have init.d support.
hmm, i have some script like zipalign and cpu-i/o setting.
im changing gov using SystemTunerPro.
Bet your cpu script is set to intelli.....
Sent from my LT30p using Tapatalk 2
mpiekp said:
Bet your cpu script is set to intelli.....
Sent from my LT30p using Tapatalk 2
Click to expand...
Click to collapse
i win
that script is script created from SystemTunerPro app. so when i change gov from that app, the script will rewrite it automaticaly.
i already removed that script and use SetCPU, it still have same problem.
i can only thinking it happen from kernel related.
maybe the only way i can do is re-install ROM and kernel, but later.
thanks for ur attention, sir :thumbup: