Is it possible to use my Plantronics M175C WIRED 2.5 headset with mute switch with my Tilt? If not what is the best WIRED headset option?
I understand that I'll need some sort of adapter/dongle. What is the BEST product?
I'll need something that also allows me to charge the Tilt when using the wired headset.
I've tried using the HTC Multifunction Audio Adapter for AT&T Tilt:
http://www.tiltdepot.com/htc-multifunction-audio-adapter/11A75A4401.htm
This adapter doesn't seem to work for me. The Tilt mic doesn't turn off! Meaning that the Tilt mic is picking up my voice/sounds regardless of the mute switch on the wired headset. I've tried to work with htc (makers of this adapter) but they aren't helpful and won't tell me what headset works with their adapter or even if it's possible for the Tilt's mic to turn off while using a wired headset.
Finally, please do not recommend a bluetooth headset - I have a Jawbone and love it. It doesn't solve my need to be on the phone for hours a day. I can't have the Jawbone run out of power while on a 3 hour call.
Thanks for your time and ideas.
K
Related
Can I directly sync my Logitech FreePulse BT Wireless Headphones with my Mogul without using the adapter?
I tired to find the headphones BT signal with the mogul and had no luck.
when you tried to find the signal were the ehadphones in pairing mode? (hold power button fro 10 seconds)
according to some posts at logitechs support forums the headphones should be able to pair with A2DP devices
Yes, they definitely work w/o the adapter and they work with wm phones. They really are one of the best sound quality A2DP headphones out there. As far as your issue, as was previously mentioned, have you put the headphones in pairing mode, and then paired?
Thanks I figured it out. I wasn't holding the button down long enough.
I have a Jabra BT3030 headset that I listen to music and answer calls through my diamond during the day whilst at work. When i'm driving i play the music through my car stero by using a 3 in one usb adaptor, but to do this i have to change to a bog standard bluetooth headset that doesn't support the A2DP profile, otherwise no sound through the stero.
Is there any way that I can change bluetooth profiles on the fly, I.E. Holding down a hardware button or a program that changes profiles when headphones are attached?
If this is possible then instead of me spending time changing headsets all the time it would be simply plug n play, making the diamond that extra bit enjoyable to have.
TEKY
Bump ...
The Jabra BT3030 Rocks!!!
.
.
.
Just wanted to shout that out...
A lot of weeks I have a problem, where I can't find an answer for.
A few weeks ago I bought the Sennheiser MM200 Bluetooth stereo headset. This set has an great sound quality, so I'm very happy with this headset.
I hoped that it would be possible to uses this Sennheiser headset in combination with the radio on my HTC TD. But unfortunately I haven't find an answer yet, or it's possible or not to listening radio with a Bluetooth headset on the HTC TD.
So is there anyone knows there is a workaround to let work the radio with a Bluetooth headset?
Tanks.
Patrick22 said:
A lot of weeks I have a problem, where I can't find an answer for.
A few weeks ago I bought the Sennheiser MM200 Bluetooth stereo headset. This set has an great sound quality, so I'm very happy with this headset.
I hoped that it would be possible to uses this Sennheiser headset in combination with the radio on my HTC TD. But unfortunately I haven't find an answer yet, or it's possible or not to listening radio with a Bluetooth headset on the HTC TD.
So is there anyone knows there is a workaround to let work the radio with a Bluetooth headset?
Tanks.
Click to expand...
Click to collapse
You cant as the wired headset is the antenna
Ludacris said:
You cant as the wired headset is the antenna
Click to expand...
Click to collapse
And do you know or it's possible to use the wired headset only for the radio signal, and use my Bluetooth headset for the sound?
Patrick22 said:
And do you know or it's possible to use the wired headset only for the radio signal, and use my Bluetooth headset for the sound?
Click to expand...
Click to collapse
I have been trying to find out how to do just this.
I ride a motorbike, and have a bluetooth crash helmet with buit in speakers / mike which works a treat for answering and making calls and indeed listening to TomTom navigation instructions from my HTC Topaz.
However, I have yet found a solution to allow me to listen to the radio via bluetooth. As you have also discovered, the headset acts as an antena but then diconects the sound from the bluetooth headset when connected. I figure that there must be a way to program the phone to use the blutooth headset as the default "speaker" and the plug in headset as only the antena.
I will repost this thread in the Topaz forum too to see if anyone has a solution.
One partial solution that I have discovered is streaming radio via an internet connection. This works, although the connection stream is not always the best and of course there is a data "overhead charge" involved.
T
no it's not possible to have both a wired headset connected an a bluetooth
even if the wires headset is only acting as antenna
Patrick22 said:
A lot of weeks I have a problem, where I can't find an answer for.
A few weeks ago I bought the Sennheiser MM200 Bluetooth stereo headset. This set has an great sound quality, so I'm very happy with this headset.
I hoped that it would be possible to uses this Sennheiser headset in combination with the radio on my HTC TD. But unfortunately I haven't find an answer yet, or it's possible or not to listening radio with a Bluetooth headset on the HTC TD.
So is there anyone knows there is a workaround to let work the radio with a Bluetooth headset?
Tanks.
Click to expand...
Click to collapse
I finally got it to work using the file posted at the end of this thread.
Lovin it!
http://forum.xda-developers.com/showthread.php?t=541238
Anybody here has tried to use the "Hi-Fi Wireless Headset with FM Radio MW600" with the Ameo?
My Ameo has the (German) HTC WM6.0 stock ROM but I want wo try a WM6.1 ROM. I want to make calls with the MW600 bluetooth headset, voice dialing and audio steaming. And caller-id on WM600 display would be very nice.
bluetooth disabled after pairing
Well, because nobody can (or want) to answer me, I had to test by myself.
The MW600 stereo bluetooth headset is a very nice gadget. With silver and white colors it looks very nice beside the Ameo (with has the same colors). The headset has two parts - a small controller with an oled display, some buttons and connectors and a good in-ear headset. The headset has very short wires but because you only have to connect it with the controller, it should be no problem. If you want another ear-phone you can connect every 3,5mm standard ear-phone.
The controller has buttons for on/off, call, play/pause, forward, backward and a volume slider. Pairing with the Athena was very easy, similar with other bluetooth headsets. The MW600 supports hands free and wireless stereo profile.
Once connected, the controller can pair the Arthena automatically - very nice.
With wireless stereo you can use the MW600 as a stereo ear-phone for music and videos. On CorePlayer you can control pause/play, forward, backward and skip over bluetooth and the controler can show the play time.
On incoming calls you see the phone number (not tested if caller-id/name is working) on the controller display. And you can use voice dial for making calls too.
The MW600 has a built-in RDS radio - very nice because the Athena has no radio.
Well... but there is a big issue.
After Athena and MW600 are paired, the Athena disables bluetooth after some seconds.
I have tried some ROMS like original HTC WM6, irus' AP4 vanilla or AGB 3.0. On HTC WM6 I can't use the call button on the controller too.
On a WM6.1 ROM bluetooth is disabled but not the blue led. I had to disable and enable bluettoh some times to reactivate it.
On AGB 3.0, led and bluetooth state are identical and I can reactivate bluetooth with one simple click. The headset pairs automaticly on enabled bluetooth but after 10 seconds, bluetooth is disabled again.
Well, if I'm fast enough to start CorePlayer, I can use the headset without problems as stero head-phone. If I have a call, I can use the headset without problems too. Very strange.
Now I have deactivated wireless stereo on bluetooth settings and the connection was stable for some hours.
I have a simple Jabra BT2080 bluetooth headset to, only useable for mono hands free connections. But this works great with the Athena, stable connection for more than 8 hours.
Purzelkater said:
Well, because nobody can (or want) to answer me, I had to test by myself.
The MW600 stereo bluetooth headset is a very nice gadget. With silver and white colors it looks very nice beside the Ameo (with has the same colors). The headset has two parts - a small controller with an oled display, some buttons and connectors and a good in-ear headset. The headset has very short wires but because you only have to connect it with the controller, it should be no problem. If you want another ear-phone you can connect every 3,5mm standard ear-phone.
The controller has buttons for on/off, call, play/pause, forward, backward and a volume slider. Pairing with the Athena was very easy, similar with other bluetooth headsets. The MW600 supports hands free and wireless stereo profile.
Once connected, the controller can pair the Arthena automatically - very nice.
With wireless stereo you can use the MW600 as a stereo ear-phone for music and videos. On CorePlayer you can control pause/play, forward, backward and skip over bluetooth and the controler can show the play time.
On incoming calls you see the phone number (not tested if caller-id/name is working) on the controller display. And you can use voice dial for making calls too.
The MW600 has a built-in RDS radio - very nice because the Athena has no radio.
Well... but there is a big issue.
After Athena and MW600 are paired, the Athena disables bluetooth after some seconds.
I have tried some ROMS like original HTC WM6, irus' AP4 vanilla or AGB 3.0. On HTC WM6 I can't use the call button on the controller too.
On a WM6.1 ROM bluetooth is disabled but not the blue led. I had to disable and enable bluettoh some times to reactivate it.
On AGB 3.0, led and bluetooth state are identical and I can reactivate bluetooth with one simple click. The headset pairs automaticly on enabled bluetooth but after 10 seconds, bluetooth is disabled again.
Well, if I'm fast enough to start CorePlayer, I can use the headset without problems as stero head-phone. If I have a call, I can use the headset without problems too. Very strange.
Now I have deactivated wireless stereo on bluetooth settings and the connection was stable for some hours.
I have a simple Jabra BT2080 bluetooth headset to, only useable for mono hands free connections. But this works great with the Athena, stable connection for more than 8 hours.
Click to expand...
Click to collapse
I able to pair this mw600 with my laptop and 2 phones(HTC Touch Pro2 and Sony Ericsson F305).
1) I can answer a call from SE F305 while on movie from laptop/FM/musci from HTC without any prob. The quality of this device SUPERB!!
2)The only prob is with HTC,I can't pair HTC with MW600 while on movie from laptop/FM/music from SE F305. I tried change many option and tweak but hopeless. Anyone have a solution for my problem?Or MW600 compatible multipoint with SE phones only?
TQVM
I upgraded to the Moto-X for the touchless controls as I commute to work and back on my motorbike and I was really unsatisfied with alternatives floating around to simulate touchless control.
Now when I am in my car and using my bluetooth headset the voice control works just fine, I can navigate, call and send quick messages no problem
But on my bike I use a Viper RSv-131 helmet which has bluetooth built in and I listen to local radio or music whilst I'm riding but my Moto-X does not respond when I cay Ok Google now or when I press the button on my helmet either I can answer incoming calls fine but thats it.
Does anyone else use a Moto-X on a motorcycle/motorbike or even a regular bicycle with bluetooth and do you have similar problems?
Have you tried Google>Settings>Voice>Bluetooth headset
Solutions Etcetera said:
Have you tried Google>Settings>Voice>Bluetooth headset
Click to expand...
Click to collapse
Thanks Etcetra, I have bluetooth headset option turned on and it works using my BT headset in the car.
My gut reaction is my car headset is a regular over the ear BT headset but my helmet is like BT stereo headphones with a microphone and so I think it's a different kind of BT but I'm not an expert.
Any advice would be welcome
Check to see which profiles are connected on each device by going into Bluetooth settings and tapping the little settings icon next to the connection.
My helmet comes up as BLINK II and is ticked for phone and media audio
dr_strangetrick said:
My helmet comes up as BLINK II and is ticked for phone and media audio
Click to expand...
Click to collapse
That's unfortunate as it suggests an incompatibility issue between the two. It should certainly work using the phone profile.
Check with the helmet maker... maybe they have a firmware update available.
Turned off media audio and just tried phone audio but still the same: (