Replace TouchScreen - Tilt, TyTN II, MDA Vario III General

Hello,
i'm trying to replace the broken touchscreen on my Kaiser. Now i've stopped the work because i don't know how to solder the cable that connect touchscreen to screen.
Does anyone can help me?

teo256 said:
Hello,
i'm trying to replace the broken touchscreen on my Kaiser. Now i've stopped the work because i don't know how to solder the cable that connect touchscreen to screen.
Does anyone can help me?
Click to expand...
Click to collapse
i will say this once, it is a general rule to keep in mind and everyone should follow it. If you dont 100% of what you are doing or how to undo what you want to do, you probably should not be doing it in the first place. SEARCH.

teo256 said:
Hello,
i'm trying to replace the broken touchscreen on my Kaiser. Now i've stopped the work because i don't know how to solder the cable that connect touchscreen to screen.
Does anyone can help me?
Click to expand...
Click to collapse
Google it. I don't think there's any soldering involved in replacing the screen. Ribbons should slide/clip in IIRC. There are plenty of videos out there. I followed a Youtube video to replace my Excalibur screen.

Related

Lower part of digitizer not working

Hi,
My friend gave me his broken G1(digitizer+screen).
I've bought new ones and replaced them.
Now i have a weird problem that the lower part of the digitizer is not responding, i cannot open the menu button or touch anything there.
but if i hold my finger for few seconds and then let go then it will open a "quick search".. like it is responding.
is it possible that i've messed something along the way or that the digitizer was not working from the factory?
Also was wondering if there is some program to calibrate?
Thanks
Anyone?
can't help you actually, but i hope this hint helps you:
the g1 has a capacitive touchscreen, it doesnt require a digitizer / calibrating...
but as i don't know how capacitive touchscreens work in detail i can't help you...
I have the same problem :S
I have seen posts about the lower part of the digitizer not working. I think your digitizer is defective. Try wiping and installing your rom again or If you can, see if you can disconnect the ribbon connecting the digitizer to the LCD and then connect it back to the LCD, restart your phone and If it still does not work then your digitizer is probably defective. Contact the seller and ask for a refund or replacement would be the best choice.
Ye I managed to fix it.
I opened and reconnected my phone probably 100 times :S
Oh well, I hope its fixed permanently and Iwon't have to open it again incase it drops out again :S
If you just recently bought the digitizer, i would suggest you ask for a replacement so that problem would not occur again.
theoneonly said:
Ye I managed to fix it.
I opened and reconnected my phone probably 100 times :S
Oh well, I hope its fixed permanently and Iwon't have to open it again incase it drops out again :S
Click to expand...
Click to collapse
did this really work?!?!?!?

[Q] Replace keypad flex cable problem i9000

I replaced all the flex cable with mic and buttons of my samsung galaxy s i9000, cause i damaged it during a display replacement.
Display now works fine but, left and right button not.
Central button also works fine.
can anyone help me to understand what is gone wrong?
Thanks
samsung GT-I9000 mic flex cable
andrea72rm said:
I replaced all the flex cable with mic and buttons of my samsung galaxy s i9000, cause i damaged it during a display replacement.
Display now works fine but, left and right button not.
Central button also works fine.
can anyone help me to understand what is gone wrong?
Thanks
Click to expand...
Click to collapse
Hello Andrea72,
What has happened if that you have torn though the flex cable going to the buttons contact pads this can only be fixed by replacing them. To do this you'll need to strip down the phone and remove the old and replace with a new one these can be found on such site like ebay, all sounds great, however to remove this part is more difficult has it's stuck down with some pretty impressive glue. I'm in the some situation as your self good luck.
Thaaquin
thaaquin said:
Hello Andrea72,
What has happened if that you have torn though the flex cable going to the buttons contact pads this can only be fixed by replacing them. To do this you'll need to strip down the phone and remove the old and replace with a new one these can be found on such site like ebay, all sounds great, however to remove this part is more difficult has it's stuck down with some pretty impressive glue. I'm in the some situation as your self good luck.
Thaaquin
Click to expand...
Click to collapse
Just a quick update i have finally received my part form china and going to attempt to replace it at the weekend, I'll try and document this and post if I am successful.
Did you manage to replace that part? My microphone is broken, so I want to replace the same part as you guys. Did you use a guide? If yes, can you post a link?

[Q] Digitizer remplacement problem

Hi
I bought that ; http://www.ebay.com/itm/LCD-Touch-D...102?pt=LH_DefaultDomain_0&hash=item4602f56036
once I installed all the pieces, I restart the cell. It starts, I can hear sound, but no image on the actual screen. What could I do wrong? Does anyone has a video? All I can find on youtube is a video of how to disassembled it but never how to change the digitizer.
Thx for ur help!
SoapShoeS said:
Hi
I bought that ; http://www.ebay.com/itm/LCD-Touch-D...102?pt=LH_DefaultDomain_0&hash=item4602f56036
once I installed all the pieces, I restart the cell. It starts, I can hear sound, but no image on the actual screen. What could I do wrong? Does anyone has a video? All I can find on youtube is a video of how to disassembled it but never how to change the digitizer.
Thx for ur help!
Click to expand...
Click to collapse
just make sure the flex cables are plugged all the way in.... if the lcd plug is just barely off it will not work...if all are plugged in it should work... there is a chance the part could be bad..(it does happen) if so just return it for another.... but the best advice is check the connections... dont force them... but unplug and replug them... anything that has to be forced is wrong and will cause damage if you force it...
no real need for a video as with the part you have shown is a pretty simple remove a few screws and unplug connections... also inspect the flex cables on the new unit... one small nick in the lcd one and it also could cause this...
hope this helps...
kawgirlval69 said:
just make sure the flex cables are plugged all the way in.... if the lcd plug is just barely off it will not work...if all are plugged in it should work... there is a chance the part could be bad..(it does happen) if so just return it for another.... but the best advice is check the connections... dont force them... but unplug and replug them... anything that has to be forced is wrong and will cause damage if you force it...
no real need for a video as with the part you have shown is a pretty simple remove a few screws and unplug connections... also inspect the flex cables on the new unit... one small nick in the lcd one and it also could cause this...
hope this helps...
Click to expand...
Click to collapse
Thx for ur help.
I tought that maybe it had something else to swap or something.
I already sent back one digitizer to the sender cauz the other one wasn't working... So my guest was that if a second one didn't work I was probably the problem but seem not...
When I reinstalled my old (and broken) screen its work like a charm.
Anyway thx for ur help I'll try to reinstall it
Moved To Q&A​
Please post questions in the Q&A section​

[Q] Please Help

Hi guys. I recently broke my screen on my one and i order a replacement for it. I decided to do the repair myself and everything went well but when I powered on the phone after i had replaced the screen i noticed that the camera, the upper speaker and the headphone jack weren't working. They are all related to the sister board but i can't find what i have done wrong. I have already checked the connections and i flashed a new rom just in case it was a software problem. Can anyone help me with this? Is there a connector that connects all these things to the mother board?
aleaek said:
Hi guys. I recently broke my screen on my one and i order a replacement for it. I decided to do the repair myself and everything went well but when I powered on the phone after i had replaced the screen i noticed that the camera, the upper speaker and the headphone jack weren't working. They are all related to the sister board but i can't find what i have done wrong. I have already checked the connections and i flashed a new rom just in case it was a software problem. Can anyone help me with this? Is there a connector that connects all these things to the mother board?
Click to expand...
Click to collapse
before you do everything/anything see these videos first, or you can follow how to reassembly it, maybe you forget to connect cable/s
http://www.youtube.com/watch?v=yyfuBhWbhtE
http://www.youtube.com/watch?v=qZFAsgjCunc
http://www.youtube.com/watch?v=cyrxa23OwME
moha_moha20106 said:
before you do everything/anything see these videos first, or you can follow how to reassembly it, maybe you forget to connect cable/s
http://www.youtube.com/watch?v=yyfuBhWbhtE
http://www.youtube.com/watch?v=qZFAsgjCunc
http://www.youtube.com/watch?v=cyrxa23OwME
Click to expand...
Click to collapse
I have already watched these and everything seems to be in place. What is weird is that the vibrator which is a component of the sister board is working fine. I' m trying to figure out which cable connects the parts that are not working to the motherboard.
aleaek said:
I have already watched these and everything seems to be in place. What is weird is that the vibrator which is a component of the sister board is working fine. I' m trying to figure out which cable connects the parts that are not working to the motherboard.
Click to expand...
Click to collapse
the 2nd video, at 5:35 , there are 3 Flat Cables, if you connect it wrong, or cut one of them, you will found the same problems
check there cables again and any other same Flat Cables

[Q]My Xperia z touch is malfunctioning

My touch screen is having issues.. In one area about 3/4 down near the bottom across the length the screen is not responsive.. Here is a picture showing where /i62.tinypic.com/2ykn8rd.png (please add the http:/ before the link to check it)
I checked the touch with the service test
Is it a problem with the hardware? Because I haven't dropped it and there aren't any cracks..
Only thing I can think of is that my charger wire is a little frayed and that charge has seeped into the screen.. But is this damage permanent or how can I fix it ?
Any help would be much appreciated.. Thank you
Any help please?
randikag said:
Any help please?
Click to expand...
Click to collapse
Hi there, I'm sorry I couldn't find any information regarding your problem in the web and the way how to fix it. I'm suggesting you to send your phone to specialized repair center (Sony). Or you just can give a try and reflash the rom you're using, maybe it causes this problem - nobody knows until you try.
Good luck! If you're answering or anything like so, please quote the message that I'd be able to see it.
Hi, if the touch screen previously works without problem, can be an hardware damage of the touch screen panel, as you can see there is only one row that don't works, all you have to do is replace the entire LCD+Digitizer assembly, and the phone will works perfectly

Categories

Resources