Related
Not trying to start 1000 threads related to TomTom on the phone, but there seems to be a reoccurring issue with people wanting to get TomTom working on their AT&T Tilt. A lot of people, including myself earlier today, were running into issues with most of the posted files working on the AT&T Tilt. We'd get the message about the ROM being needed to be upgraded. Well buried deep in one of the TomTom threads there was a post by d12ag0n49 pointing to http://www.megaupload.com/?d=JZI2MQES (rar archive with password elrincondedey) that seems to solve the problem for AT&T Tilt users.
I have also uploaded just the cab file onto rapidshare without a password at:
http://rapidshare.com/files/62623762/ttn_6_032_8351_HTCNLD.cab.html
This version appears to work just fine on the AT&T tilt. It does not come with any maps and does link to getting the one free map online (although link never loaded for me). Just simple add the cab file onto your Tilt and install away. You'll have a single voice to choose from without getting additional voices.
Hope this helps.
Steven
i hear you... but man niether one wants to work for me. i guess im sh** out of luck.
but a question. you say just put the cab file in the tilt.
now in laymans terms i need more! assuming i have not installed anything related to tt where would i install this cab file?
Using ActiveSync you need to copy over the .cab file onto your phone (or maybe you can just save it through your browser on the phone). Once you have got it on the phone, you need to use File Explorer to navigate to the directory you saved it in. Find it and run it and it should install after that. What problem are you getting?
This TomTom .cab installed fine, and now I'm configuring it. I haven't finished, but just wanted to pause and thank you for the Female Eva voice from the NETHERLANDS! Like I understand that!
stevenSZ said:
Using ActiveSync you need to copy over the .cab file onto your phone (or maybe you can just save it through your browser on the phone). Once you have got it on the phone, you need to use File Explorer to navigate to the directory you saved it in. Find it and run it and it should install after that. What problem are you getting?
Click to expand...
Click to collapse
steve
i will give it a try...will post my results
thanks bud
Yankee802 said:
This TomTom .cab installed fine, and now I'm configuring it. I haven't finished, but just wanted to pause and thank you for the Female Eva voice from the NETHERLANDS! Like I understand that!
Click to expand...
Click to collapse
LOL yea might be a bit difficult, but at least you can see what's going on, right? If someone wants to post up detailed instruction on changing the voices/languages please do!
lol geez i think im going to give up
ok via sync i have "explore" which opens the phone.
1 i have copied the whole file and tried also just the contents...no luck you click on files nothing
2 i have copied the file and tried also just the contents into "my mobile phone"...no luck you click on files nothing
its as if after i copy them into the phone the are useless
the closest i have came is with one of the downloads it came as a install wizard which would extract it. but the phone says i need to update rom.
lets say I have a bunch of maps. how do I installthem so tom tom can see them?
lets say you share those maps...ahaha jk
this is where i need to be. try installing that ver (above links) of tt and then i believe you can use tt home or manually install your self in the proper directory.
i just cant get tt itself to install AAARRRGGG
good luck
grandsuke said:
lol geez i think im going to give up
ok via sync i have "explore" which opens the phone.
1 i have copied the whole file and tried also just the contents...no luck you click on files nothing
2 i have copied the file and tried also just the contents into "my mobile phone"...no luck you click on files nothing
its as if after i copy them into the phone the are useless
the closest i have came is with one of the downloads it came as a install wizard which would extract it. but the phone says i need to update rom.
Click to expand...
Click to collapse
you're disconnecting your phone from activesync, then using file explorer on your phone to "click" on the cabs you copied over, right?
sigmanuclay said:
you're disconnecting your phone from activesync, then using file explorer on your phone to "click" on the cabs you copied over, right?
Click to expand...
Click to collapse
hmm, no (dam rookie)
update:
yeah still nothing
one version looks like it installs/extracts but nothing another verison i try says its not a valid pocket pc app.
How do I get US English voices? I have no idea what she is saying!
JBHorne said:
How do I get US English voices? I have no idea what she is saying!
Click to expand...
Click to collapse
go to tomtom site and download tomtom Home
hey steven, my free map didn't load as well on my phone..so how i got the free map was : the page that was trying to load on my pie,i added that to my favorites folder and i synced my 8925 with favorites contacts etc checked and added it to my laptop internet explorer..opened the favorites there is was the map i was looking for....so i used the laptop to download the map...it is cool...hope works for you
when you download the software it should be one little app thats it..don't open it just put it on your phone ad usinf file explorer find it and click it..it should be easy..
anyone have any luck download English voice?
yea i ahve downloaded a voice pack. but not sure how to install it.
same with more maps. for some reason it wont ocpy over missing sync always fails
well if anyone wishes to help some more here it is...
i have downloaded the app and installed via active sync. i installed to my documents.
1.i have disconnected active sync
2.via the phone accessed file explorer and opened the cab file folder
inside are 10 files and a setup file. i click it (setup) and a "loading" bar moves at the bottom, 3kb then 9kb and then thats it.
3.nothing happens. no Tomtom. no other files are click-able.
4.???help please
att tilt
rom 1.57.502.2
grandsuke said:
2.via the phone accessed file explorer and opened the cab file folder
inside are 10 files and a setup file. i click it (setup) and a "loading" bar moves at the bottom, 3kb then 9kb and then thats it.
Click to expand...
Click to collapse
If you click on a .cab file in file explorer on your phone, it shouldn't "open" (as in let you see the various files within the .cab), it should simply start installing. Not sure what's going on with you.
For those looking for voices, just google free tomtom voices, there are multiple places to find them (and there are some available directly from TomTom). Once you find the ones you want, you just copy those files directly into the "voices" folder that TomTom created. For me, it's in the root of my storage card. For maps, it created a "My documents" folder on my storage card, and the maps are stored in there. Once you get the maps and voices saved in the locations it expects them to be, you just switch to that voice and map in "preferences" within TomTom.
Hate to gloat, but I got TomTom6 working on my Tilt and it works great. Forget the english voices, go for the Darth Vader one!
A quick google search for "tomtom voices" yields a ton of sites.
I have just installed Opera Mini 4 Beta 2 on my Tilt.
I'd like to use it as my default browser, however it's annoying that every time I open it I get asked if I really want to allow it to connect because it is an "untrusted application".
I have an unlimited data plan, so I want to change it to be a "trusted" application so I don't have to tell the Tilt it is ok to use every time I open it.
Sorry for the newb question. I didn't see a lot on a search.
Thanks!
http://forum.xda-developers.com/showthread.php?t=332087&page=2
Schooleydoo said:
http://forum.xda-developers.com/showthread.php?t=332087&page=2
Click to expand...
Click to collapse
Hey, that's perfect! Thanks, you rock!
Ok, after trying everything in that thread I am still having some issues and it appears that there is at least one other guy that can't get it to work on the Kaiser (I have the Tilt).
I've tried hex editing the selector.utf file myself as well as downloading the fix.exe file that is provided in that link and neither one works.
I have the Opera Mini browser mapped to the PIE button just fine, but the problem is getting the "untrusted" thing to go away.
When I change the selector.utf file so that the line reading "domain=untrusted," is now "domain=tckmax ," when I press the PIE button I get an error that says:
"Could not find suite s0_"
However, I can see that the s0_suite.utf file is in my appdb directory.
Any ideas?
Thanks!
ETA: I've seen some mention "cloudyfa's" jbed will work. Where can I get that jbed? Search turned up nothing.
Anyone?
I haven't been able to get this to work. I think it has to do with the jbed that I am running (stock jbed that came with the tilt).
The only info I could seem to find was that some guy named cloudyfa has a custom jbed that will get rid of the "untrusted" warning, but searching hasn't come up with anything on cloudyfa.
Can anyone help point me to a jbed that will work?
Thanks!
have you tried kaiser tweak, there is a function to disable warning.
kms
http://forum.xda-developers.com/showpost.php?p=1483665&postcount=24
VTX said:
Ok, after trying everything in that thread I am still having some issues and it appears that there is at least one other guy that can't get it to work on the Kaiser (I have the Tilt).
I've tried hex editing the selector.utf file myself as well as downloading the fix.exe file that is provided in that link and neither one works.
I have the Opera Mini browser mapped to the PIE button just fine, but the problem is getting the "untrusted" thing to go away.
When I change the selector.utf file so that the line reading "domain=untrusted," is now "domain=tckmax ," when I press the PIE button I get an error that says:
"Could not find suite s0_"
However, I can see that the s0_suite.utf file is in my appdb directory.
Any ideas?
Thanks!
ETA: I've seen some mention "cloudyfa's" jbed will work. Where can I get that jbed? Search turned up nothing.
Click to expand...
Click to collapse
OK, you can't just replace "untrusted" with "tckmax". you have to pad it with spaces to the same length. I.e. replace "untrusted" with "tckmax ". That will eliminate the "cannot find S0_..." issue. However, I do that, and I still get the nag messages.
OK, the tckmax fix seems not to work for my stock java Esmertec JBed that was on the Kaiser ROM. I installed this Cloudyfa version (which has a different/more recent build date) and voila, it works now without the nag...Thanks for the link to the latest version!
Can you copy your quick launch icon for me? I just cant seem to get the .ink to work. I dont know is it that TC cant make it right, i read it somewhere.
Well, you can't just copy someone's because it depends on what other java apps you have installed on your phone.
but the easiest way to create one is to simply use a Notepad to create simple text file. And it should only contain the following text:
28#"\windows\jbed.exe" -run s1_
BUT you may need to edit it and replace the S1_ with something else. if this is the only Java app you have installed and used, then most likely you want to use S0_ in place of S1_.
Name it Opera.lnk (or whatever you want it to say).
And then copy it to your "\Windows\Start Menu\Programs" folder.
Thanks to you guys who figured this out. This one of the little annoying things
that ticked me off. I'd have to first: click on the java shortcut, then click on opera mini, then click on yes to permissions, then yes to connect.
Now I just click on the Opera mini shortcut and BOOM! Up and going, plus I have the IE button reassigned as Opera Mini
THANKS!
jomo25 said:
Well, you can't just copy someone's because it depends on what other java apps you have installed on your phone.
but the easiest way to create one is to simply use a Notepad to create simple text file. And it should only contain the following text:
28#"\windows\jbed.exe" -run s1_
BUT you may need to edit it and replace the S1_ with something else. if this is the only Java app you have installed and used, then most likely you want to use S0_ in place of S1_.
Name it Opera.lnk (or whatever you want it to say).
And then copy it to your "\Windows\Start Menu\Programs" folder.
Click to expand...
Click to collapse
Tried that, only thing i get is a non working .ink file. Closest ive got on creating the working quick launcher is with TC. It just opens the java applet and says could not find suite s0_.
I think the easiest way would be if some one is kind enough to copy me the working file. I have the Cloudyfa's EsmertecJbed intalled and it is s0_ where it needs to point to. I got rid of the nag, only thing that isnt working is the straight shortcut to open Opera.
i have'nt tried opera, but has anyone tried installed the kaiser tweak, there is a function to disable security warnings.
kms
Attached for S0_. Had to ZIP it so can upload.
Never used KaiserTweak. But I did get the nags to stop via my actions above. Not sure if KT would eliminate it.
Thanks, that one worked straight away. Strange, but it must be that what a read in some post about Total Commander not doing the shortcut right.
Any ideas is it possible to get a quick launch button straight to Opera on TrayLnch?
Anyone? Is it possible?
kms108 said:
i have'nt tried opera, but has anyone tried installed the kaiser tweak, there is a function to disable security warnings.
kms
Click to expand...
Click to collapse
BTW, Kaiser Tweak doesn't suppress these security messages. Its a different kind of msg it suppresses.
did anyone ever get this to work for mini 4.2? I've been battling it for a couple hours now with no success. I've tried editing the utf file, but I always still get the untrusted app and network access prompt. Any pointers would be greatly appreciated. Thanks.
I am having a problem with logmein from my phone.
a bit of a background.
I'm loggin into a Windows XP machine.
I have the logmein free account.
I can use a PC and it logs me in just fine.
It works on my account from my friends Sprint Mogul PPC just fine with WM6 and ractre cab
No matter what ROM on my Kaiser, it gets the same error
No matter what browser I use on my Kaiser, it gets the same error.
The problem. I have the cab installed already that I DLd from logmein.com. I go to logmein.com and type in my login info/pass. I click "logmein".
about 1 in (5-50) times it will then take me to the screen where I can select my computer. The other 4-49 times, it takes me back to the login screen where you enter your login info. There arent any error messages or anything. I then click "back" in PIE and hit the submit button again. repeat this a ton of times until it logs me in.
The next screen is where you select your computer. The same thing happens here, and it will bring me to the login screen. Click back and submit again and million times and eventually it will work.
Once I get to the screen where you can click "Remote control" this works fine.
I've asked on logmeins forums and no responses. I emailed their tech support and no responses.
I dont know what to do at this point except move to different software.
any ideas?
I assumed you did a serach for Logmein?
http://forum.xda-developers.com/showpost.php?p=1683012&postcount=2
grizzley said:
I assumed you did a serach for Logmein?
http://forum.xda-developers.com/showpost.php?p=1683012&postcount=2
Click to expand...
Click to collapse
Yes. and I assume you read the part where i've already installed that?
it works for me after....
running the disable cingular proxy cab.
I used to get the exact issue you have on my Tilt. Here's what I've found to work.
Run the disable Cingular Proxy cab (search around, its everywhere in these forums) PRIOR to entering your username/pass.
If i have done this, it will go the 1st and every time to the my computers list and then i can RC from there.
If i forget to run it and i hit "the loop", you can leave IE running and run the cab from a file explorer, then switch back to IE and try again.
Annoying, i know...this coupled with the need to use IE rather than Opera Mini are definite cons to using Logmein on WinMo, but I still need to almost everyday.
Let me know if you can't get this solution to work for you.
I tried that and it didnt work.
Downloaded disable cingular proxy cab.
rebooted.
ran disable cing proxy cab
ran PIE
went to logmein.com
logged in (that part went fine)
clicked on computer.
it took me to login page.
rebooted
ran pie
ran disable cing proxy cab
went to logmein
tried loggin in.
looped =/
Nobody has a good answer for this that I have been able to find. You can try loggin in on LogMeIn's PDA site, https://secure.logmein.com/pda That stopped the endless log in loop problem for me, and I can get to my computer groups. However, I can't remotely control anything. I click the computer I want, enter the password, and it brings up a screen with whatever options that computer has (just Remote Control for LogMeIn Free, Remote Control and File Manager for LogMeIn Pro.) You click Remote Control, and it doesn't do anything, just brings you right back to the same screen. File Manger DOES work on the computer I have LogMeIn Pro on, but I really need the Remote Control. It is maddening, nobody at LogMeIn or any other phone forums seems to know why this is happening. I never had the proxy setup to begin with, everybody keeps talking about proxies like that's the problem, but disabling the proxies doesn't solve the problem for a huge number of folks. I've been able to find solutions to all my other Tilt problems with a little diligent googling, but not this one. I'd love an answer myself!
sorry...
sorry guys..
I have tried almost every kaiser rom here, and at least half of the wizard ones when i had that and the logmein has been a thorn in my side as well, except for me the toggle of disable/enable proxies works every time.
I wish you both luck in your searches for a more universal answer to this problem.
the real key is a fully supported solution from logmein...
Are you using PIE Plus or another multi tab browsing utility? The happens to me with PIE Plus, but only if I select Pocket View in the view settings.
i gots it 2 work!
i am using
Kaiser/TILT
w/ Duttys DualTouch V3 Final(WM6)
AT&T Service
@ 1st logmein wouldnt work
but i was trying to use it w/ Opera
it only works w/ internet explorer.
people said it does not work w/ WM6
that is false.
it looped continuously w/ that loggin crap until
i did the following.
TO GET IT TO WORK:
uninstall RACtrlCE.cab if already installed.
clear IE cookies.
soft reset
download the RACtrlCE
on your PC via
this link:
http://forum.xda-developers.com/showthread.php?p=1828858#post1828858
the cab is in the above post link scroll to find it.
transfer the cab via
exchange connection.
install cab on your phone.
then soft reset.
go to www.logmein.com
which should automatically redirect
you to https://secure.logmein.com/pda.
log in and u should b in business!
Okay, I post a question in this thread & what happens????
Now everytime I log into Logmein.com I connect fine but about every five minutes I lose the connection & get an "Invalid IP Address" error. Anyone have this problem? I tried adding my own IP but then I can't connect period. Anyone know a fix?
isimme said:
i am using
Kaiser/TILT
w/ Duttys DualTouch V3 Final(WM6)
AT&T Service
@ 1st logmein wouldnt work
but i was trying to use it w/ Opera
it only works w/ internet explorer.
people said it does not work w/ WM6
that is false.
it looped continuously w/ that loggin crap until
i did the following.
TO GET IT TO WORK:
uninstall RACtrlCE.cab if already installed.
clear IE cookies.
soft reset
download the RACtrlCE
on your PC via
this link:
http://forum.xda-developers.com/showthread.php?p=1828858#post1828858
the cab is in the above post link scroll to find it.
transfer the cab via
exchange connection.
install cab on your phone.
then soft reset.
go to www.logmein.com
which should automatically redirect
you to https://secure.logmein.com/pda.
log in and u should b in business!
Click to expand...
Click to collapse
Followed these exact steps. still loops for me X 1000
I tried installing to device, then my storage card, repeating all steps.
The odd thing is that I downloaded minimozilla (mobile firefox) and it logs in JUST FINE) but of course stops at the point where it would show you the desktop. but has ZERO issues loggin in.
*SIGH*
Anyword on a fix for Mismatched IP Address error?
i dont have anything on the mismatched ip thing.
I did manage to solve my problem on my own.
So anyone else still having this problem:
start|settings|connections|connections|Advanced Tab|Select Networks
In the top drop down, select the tab for the internet that you use (Medianet, etc)
Click edit.
Bottom tab click proxy settings.
Uncheck "this network uses a proxy server to connect to the Internet"
Click ok.
The cab that is supposed to do this didnt work for me. but doing this manually works for me.
Working perfect on Blackstone with the cab downloaded from logmein.com with Internet explorer.Not working in Opera.
My steps:Opened https://secure.logmein.com/pda from IE, logged in to my account,then when i pressed connect logmein forced me download THEIR RACtrice .cab ,installed,restarted IE,and i'm in bussiness.
Hello, perhaps anybody can help me.
I just got my XDA Diamond and thanks some genius guys posting here i got the htc rom running now and i am very happy about that.
I tried to find a thread where my folowing question will be answered but i couldn´t find one. If anyone knows about such a thread just send me a link or give me a advice. It´s not my attention to spam around....
I installed the task manager and saw lots of processes running like
operaplel.exe
poutlook.exe
sapsettings.exe
rapicInt
tmail.exe
biotouch.exe
quickgps.exe
SIPGT_app.exe
And I asked myselfe if I can shut down these processes if they arent necessary. Also i don´t know witch are importante and which not, or wich you need for doing what....
f i kill some of them, i´ll get more free ram, and perhaps better speed-performance with longer sandby-battery-time , would that be right????!!!!
I also read about the biotouch.exe that is total unnecessary on the diamond and is just necessary with the cube that the diamond doesn´t have.
Don´t know of that is right or not.
I also tried to find out how to prevent thes processes to autostart.
But there are thousands of entries in the reg. so i could find out anything...
Many Greeting to all
Markus
Ok, I tried to search for example for operaprel.exe in the registry, but i couldn´t find any key in the whole reg.
So there must be a other way to stop the autostart loading of this exe.
The i read about the autostart folder in windows but there istn´t the operaprel.exe...
So could anybody just give me a short advice or a link where this is explained...
I couldn´t find anything that helps me going on...sorry
I also found out that poutlook should better keep on running because its the mail client and tmail is the account manager.
And SAPSettings stands for SIM ACCESS PROFILE and is a Bluetooth Data transfer Protokol, so i´ll better keep it running...
1. Look into \Windows\StartUp folder. Sounds like it is the Autostart directory for WM. There is an item named HTCStartup. It could be the thing which launches opera loader and other things. I haven't tried removing it though. You can kill off opera loader using some process manager and everything will work fine.
2. tmail can be closed by launching Messagages via Start then closing it. Atleast for me it does close.
Hi i tried that, but i didn´t write down all the files that are loaded when i keep this files in the "windows/autostart/" folder.
But it seems that it is more free memory avriable.
I´m gonna test it today again and i hope it worked good.
But the operaprel.exe and some other files starts also...
But tanks alot for your advise!
Hi guys,
For those with time changing / switching / problem using Garmin mobile XT, here is a nice workaround.
Evolving from Garmin iQue to Mobile XT was never having my phone clock on time again. Every time I used XT I had to check if my phone clock and date was ok.
I was tired of trying every single Garming XT version with diferents Kaiser ROM's and nothing was solved. So I developed a tiny .net console application that wraps Garmin execution and monitors time changing, restoring original time in case of change.
My TyTnII is running WM 6.1
Rom: Hyperdragon III
Radio: 1.65.24.36
3.sj.hd.03
25.94.40.06h
Garmin XT Version 5.00.20wp
Installation and use:
Compact Framework 3.5 may be needed if it is not installed.
Download the attached file.
Copy all 3 files from zip in any directory.
i.e. "\Storage Card\Program Files\GarminXTClockFix\"
This app need the location of your "Que.exe" file as a parameter. So you may modify the original "Garmin Mobile XT.lnk" in your "\Windows\Start Menu\Programs" folder to target GarminXTClockFix.exe. Or you can create another one.
i.e. 30#"\Storage Card\Program Files\GarminXTClockFix\GarminXTClockFix.exe" \Garmin\Que.exe
(I included my .lnk file too, just in case)
From now on, you have to run Garmin from the modified shortcut
And that's all, I know that this is not THE final solution, but I hope it can be useful just as it was for me.
Please feel free of giving some comments here and any kind of feedback would be appreciated.
Cheers.
Diego
UPDATE: deleted mediafire link and uploaded an attached file.
Thanks
Hi Diego,
Thank you for your post, It’s has been very helpful. I hope you can post other solution.
Regards from ARGENTINA,
JuanMatias81
I have determined that the time change problem occurs if GarminXT does not quickly get satellite lock. Apparently there is an undocumented feature that sets the device time from the GPS signal, but if it does not get a lock, it sets it to midnight GMT.
My solution is to prime the GPS with the BAF GPS Toggle today plugin before starting GarminXT.
Alan
Fixed!!
I fixed mine!!!!
Just went into Start>Settings>Personal Tab>Phone>Time Zones Tab, and Un-Checked the "Auto change time zone and clock" box.
There is no problem for me because in my country (Costa Rica) we don't have time change due to change of season, it's always the same.
I don't know why MS put this option there. I think that the place it corresponds is in Time Settings or Regional Settings, but in Phone Options???
Still don't know why Garmin XT is the only one program that does this thing.
No more clock/date changes for me!!!
I hope this can solve the problem of many of you, since there isn't a reasonable solution yet.
fnuna said:
I fixed mine!!!!
Just went into Start>Settings>Personal Tab>Phone>Time Zones Tab, and Un-Checked the "Auto change time zone and clock" box.
There is no problem for me because in my country (Costa Rica) we don't have time change due to change of season, it's always the same.
I don't know why MS put this option there. I think that the place it corresponds is in Time Settings or Regional Settings, but in Phone Options???
Still don't know why Garmin XT is the only one program that does this thing.
No more clock/date changes for me!!!
I hope this can solve the problem of many of you, since there isn't a reasonable solution yet.
Click to expand...
Click to collapse
Unluckily my clock settings were the first things that I've tested, with no solution for me.
I've just updated my solution, with a minor fix regarding problems with time zones like Caracas -4.30 or Teheran +3.30
Hi Diego!
I tried your method but I'm not able to run it. For sure I'm doing something wrong.
My phone is an iPAQ 910c, Windows 6.1 in Spanish w/ CF 3.5 Installed.
I moved the .lnk file you attached in the zip into Start Menu/Programs and tried to run it with no success.
Also, the name of the exe from Garmin is QuePPC.exe.
If you can please explain me the following step you added, will be highly appreciated, since I'm not sure on what to do here
"This app need the location of your "Que.exe" file as a parameter. So you may modify the original "Garmin Mobile XT.lnk" in your "\Windows\Start Menu\Programs" folder to target GarminXTClockFix.exe. Or you can create another one.
i.e. 30#"\Storage Card\Program Files\GarminXTClockFix\GarminXTClockFix.exe" \Garmin\Que.exe
(I included my .lnk file too, just in case)"
Thanks a lot in advance!
gamboaecr said:
Hi Diego!
I tried your method but I'm not able to run it. For sure I'm doing something wrong.
My phone is an iPAQ 910c, Windows 6.1 in Spanish w/ CF 3.5 Installed.
I moved the .lnk file you attached in the zip into Start Menu/Programs and tried to run it with no success.
Also, the name of the exe from Garmin is QuePPC.exe.
If you can please explain me the following step you added, will be highly appreciated, since I'm not sure on what to do here
"This app need the location of your "Que.exe" file as a parameter. So you may modify the original "Garmin Mobile XT.lnk" in your "\Windows\Start Menu\Programs" folder to target GarminXTClockFix.exe. Or you can create another one.
i.e. 30#"\Storage Card\Program Files\GarminXTClockFix\GarminXTClockFix.exe" \Garmin\Que.exe
(I included my .lnk file too, just in case)"
Thanks a lot in advance!
Click to expand...
Click to collapse
Hi there, maybe we have different Garmin XT version, but I think it wont be any problem.
This little program needs as a parameter the location for your QuePPC.exe
So, before trying to run the "GarminXTClockFix.exe" you have to modify the .lnk that you've copied.
Tell me where you copied the GarminXTClockFix.exe and the full path of your QuePPC.exe so I can assist you.
Hi! The version I have is 5.00.20wp, which I believe is the latest.
The path I placed your software is inside of the Garmin folder:
\\\Garmin\
I'm sorry for misleading you. I was looking previously at the files in the SD card, used for the installation. The software is installed in the phone itself, not the SD. In there, I found the Que.exe file. That queppc.exe I mentioned can also be used to execute the program from the SD.
The Garmin folder includes Que.exe and Garmin Mobile XT.exe. Both also execute the software.
Now I got this error when running GarminXTClockFix.exe, the phone shows this 4-color symbol meaning it's processing something but then just disappears executing nothing.
Any idea on what could be wrong?
Thanks in advance for your time!
Hi Diego! Would you please tell me how to use it? I'm still struggling with it...
Thanks a lot!
gamboaecr said:
Hi! The version I have is 5.00.20wp, which I believe is the latest.
The path I placed your software is inside of the Garmin folder:
\\\Garmin\
I'm sorry for misleading you. I was looking previously at the files in the SD card, used for the installation. The software is installed in the phone itself, not the SD. In there, I found the Que.exe file. That queppc.exe I mentioned can also be used to execute the program from the SD.
The Garmin folder includes Que.exe and Garmin Mobile XT.exe. Both also execute the software.
Now I got this error when running GarminXTClockFix.exe, the phone shows this 4-color symbol meaning it's processing something but then just disappears executing nothing.
Any idea on what could be wrong?
Thanks in advance for your time!
Click to expand...
Click to collapse
Hi! sorry for the late reply, I was on holidays
First of all, I have to mention that this partial solution is not working 100% properly for me. Meaning that my kaiser system clock is still changing from time to time Next weekend Im gonna give a try the latest WinMo 6.5.
Saying that, the error that you mention is simply because you are trying to run a 2nd instance of Garmin XT, when that happens try looking in your active application manager (ie task manager lite) and "bring to front" the existing garmin xt instance of the software.
But if you weren´t able to run at first time, you may check your .lnk file where is looking for your garmin original .exe file.
If you are still having problems, attach here the .lnk file that you are using so I can help you solving this.
Diego