Related
Hi guys,
I'm a new kaiser owner (new to windows mobile as well) I have had a lot of fun customizing my phone over the past few days, but I have run into a problem which I can't find a solution for, despite trawling the forums. I want to turn off any sounds or tones for the start menu, but I can't find a way of doing this without removing my notification tones at the same time. I'm sure this is just something very obvious I'm missing, but for the life of me I can't work it out.
Regards
Rich
Rom; Dutty's WM6.1 WME
Radio; 1.64.08.21
Sorry, scratch that! I think I've sorted it. I switched off Events (warnings, system events) from the sounds and notifications settings. This seems to sort it, but am I losing sound to anything else by doing this?
that's just the wm5 sound scheme you got there
try the wm6 scheme from the link to get rid of the sounds
http://forum.xda-developers.com/showthread.php?t=300904
I made a simple cab from the registry settings that you install to device memory, then soft reset and use any voice recorder (HTC Voice Recorder, VITOAudio Notes, Resco Audio Recorder) to record both sides of the conversation. I have tried it with several Roms, dialers and skins too and it works fine with all these and no adverse affect on normal conversation
Might be worth cooking into a Rom to give 2 side recording as standard.
Tested and working on the following Roms:
SimpleOS Xtralite v2.1, HyperDragon 4th Feb, PDA Corner Ultimate v17, v19 & v20, Anryl's 15/3 6.S rom, AthineOS WWE, WM6.5 betas (HyperDragon and PDA Corner works with HTC Voice Recorder and VITO Audio Notes, rest confirmed with VITO Audio Notes).
Download the 2_Way_Recording cab (rapidshare) *HERE*
EDIT: Made a new cab combining my 2 way recording plus the incall enable edit from pocketnow.com to enable BOTH sides to be recorded clearly from the dialer menu after a call has been established. It does not affect the ability to use a 3rd party app if you want, just gives you extra ease so you dont have to load any new programs up when you are in a call. Install the following cab to device memory, then once a call has been established just goto the dialer menu and select record. It will record in .wav format and save the recording to the Device\My Documents\Notes folder.
Download the 2_Way_Plus_InCall_Recording cab (rapidshare) *HERE*
mskip said:
First thanks to nick_martin for originally posting this in the ICR for Kaiser (2 side call recording software) thread.
I just made a simple cab from the registry settings that you install to device memory, then soft reset and use any voice recorder (HTC Voice Recorder, VITOAudio Notes, Resco Audio Recorder) to record both sides of the conversation. I have tried it with several Roms, dialers and skins too and it works fine with all these and no adverse affect on normal conversation
Might be worth cooking into a Rom to give 2 side recording as standard.
Download the cab *HERE*
Click to expand...
Click to collapse
so sweet ty skip
Thank you for this contribution.
Thanks bruv gotta try this out
If it works for you then report back what phone, rom and radio you are using it on please
mskip said:
First thanks to nick_martin for originally posting this in the ICR for Kaiser (2 side call recording software) thread.
I just made a simple cab from the registry settings that you install to device memory, then soft reset and use any voice recorder (HTC Voice Recorder, VITOAudio Notes, Resco Audio Recorder) to record both sides of the conversation. I have tried it with several Roms, dialers and skins too and it works fine with all these and no adverse affect on normal conversation
Might be worth cooking into a Rom to give 2 side recording as standard.
Download the cab *HERE*
Click to expand...
Click to collapse
I tested on two different roms. The first rom from Anryl's 6.S rom 21179 didn't work. Tried two radios (didn't take note since it didn't work). Was using Resco audio recorder and when in record mode, call comes in, message popped up saying cpu overload.
This morning, I tried on SimpleOS Xtralite v2.1 and with the radio recommended (1.70.18.02), it works. The audio from far end is rather soft during playback.
Congratulations!
Works great for me, ty for sharing this, as i'm sure most of us wouldn't have seen it in the original thread.
Thanks alot mskip
Oh and I'm using an AT&T Tilt with Hyperdragons 02/04/2009 IOLITE Rom with Kaiser 1.65.21.18 Radio. Worked just fine using builtin htc audio recorder and Vito Audio Notes Touch
zard said:
I tested on two different roms. The first rom from Anryl's 6.S rom 21179 didn't work. Tried two radios (didn't take note since it didn't work). Was using Resco audio recorder and when in record mode, call comes in, message popped up saying cpu overload.
This morning, I tried on SimpleOS Xtralite v2.1 and with the radio recommended (1.70.18.02), it works. The audio from far end is rather soft during playback.
Congratulations!
Click to expand...
Click to collapse
Tested on Anryl's 15/3 6.S rom after fresh flashing. Works with 1.70.18.02 radio. I only have SMS restored, Resco Explorer, PCMKeyboard and Resco Audio Recorder installed. Didn't get the cpu overload problem. Need to complete my Exchange 2007 Sync and finish installing the rest of the apps again before I test again.
Recording volume is rather soft though, even though volume had been set to maximum, same as for my TyTN II volume.
It seems not work in Diamond..
eastwoodwang said:
It seems not work in Diamond..
Click to expand...
Click to collapse
Phone or Rom?
Great job mskip ! Finally working for me !
ROM AthineOS WWE, RADIO 1.71.09.01 and VITO AUDIO NOTES 1.37
Thanks
Finally got this to work with stock AT&T Tilt
Thanks to everyone involved.
Vito Audio Notes was tricky to figure out. I uninstalled and reinstalled it several times before I got the settings right.
Move the yellow equalizer all the way to the left when recording. Set the microphone gain to high.
If you move the yellow equalizer all the way to the right, it will only record very loud sounds, which doesn't work for recording phone calls. If you set the microphone gain to low, the recording will be hard to hear when you play it back. You'll have to hold the speaker up to your ear.
Thanks mskip & OP
Runs perfect with PDA v.19 & VITO AUDIO NOTES 1.37
Can't believe that after all this time 2 way works wonder if it would on Dash?
stylez.
Thanks Sir mskip,
Could it be mirrored?
Thank You
This is so sweet, now we have 2 solutions on a issue that I've been trying to solve for about 1,5 year...
What happens if you install this fix with the ICR driver installed??? Let's try! I'll report back later for those of you who allready use ICR but want a louder recording.
stylez said:
Thanks mskip & OP
Runs perfect with PDA v.19 & VITO AUDIO NOTES 1.37
Can't believe that after all this time 2 way works wonder if it would on Dash?
stylez.
Click to expand...
Click to collapse
I dont know you should try it lol its only a registry edit rather than overwriting drivers and if it doesnt work you can uninstall it
Yeah I know what you mean I have been looking for some way to record both sides of a conversation for about 3 years when I got my old Hermes. Even tried going through bluetooth to my pc and recording that way lol. All it took was a few simple registry changes to allow this. I was always told it was a hardware problem and would never be possible lol. Im happy now
When I went into my registry to test this method my values was already set as the original post (http://forum.xda-developers.com/showpost.php?p=3463124&postcount=75)...
I wonder if this is what ICR does, is it the same solution??? Have anybody done a deep analysis of the ICR cab?
I was hoping for a louder recording...
jorra said:
This is so sweet, now we have 2 solutions on a issue that I've been trying to solve for about 1,5 year...
What happens if you install this fix with the ICR driver installed??? Let's try! I'll report back later for those of you who allready use ICR but want a louder recording.
Click to expand...
Click to collapse
Ok let me know what happens
After you install ICR the only way to get rid of it is a Hard Reset. Not sure how they will work together maybe the registry edit will bump up the volume with icr.
I think the registry changes are more compatable then using ICR as alot of people seem to have problems getting it working.
Report back
jorra said:
When I went into my registry to test this method my values was already set as the original post (http://forum.xda-developers.com/showpost.php?p=3463124&postcount=75)...
I wonder if this is what ICR does, is it the same solution??? Have anybody done a deep analysis of the ICR cab?
I was hoping for a louder recording...
Click to expand...
Click to collapse
I guess if your recorded volume didnt increase then ICR is taking control of rerouting the incoming sound. With JUST the registry changes the volume is very loud. I had a 30 minute phone call yesterday and VITO Audio Notes recorded both sides perfectly. Maybe you could try a hard reset sometime to get rid of ICR and then try a comparison with just the registry cab
mskip said:
I dont know you should try it lol its only a registry edit rather than overwriting drivers and if it doesnt work you can uninstall it
Yeah I know what you mean I have been looking for some way to record both sides of a conversation for about 3 years when I got my old Hermes. Even tried going through bluetooth to my pc and recording that way lol. All it took was a few simple registry changes to allow this. I was always told it was a hardware problem and would never be possible lol. Im happy now
Click to expand...
Click to collapse
Never guess what it works
Going to do a bit more testing as not sure if the RoseROM worked without as never tested it will also test Kavana's "as know that didn't", will link to you if all fine.
*Second post is a quick tutorial of all the steps I did*
For the past year+ I lots of problems with my tilt. Terrible keyboard response problems, like the keyboard only working 25% of the time. The touch screen being unresponsive or slow 50% of the time. I've hated my phone. Thought it was just a piece of junk. I soft reset so much I thought the reset button was going to fail.
I tried nearly every new ROM that came out, each time after being dissapointed because my problems remained, then I'd move on to the disable xt9 cab, tilt keyboard fix cab, keyboard speed up cab (which I'm still not sure if works, since I now have my initial keyboard delay set at 0 and I don't know if I see a difference), etc. Tried the touch sensitivity registry edit, installed the (I think) x1 touch sensitivity cab. But nothing seemed to change a thing.
I had realized that most of my issues were software related because sometimes things would work fine (for a couple minutes). I've tried the press the hell out of the keyboard buttons fix that was supposed to regain contact between the key, and the sensor for the keyboard, and pretty much everything out there.
Then I recently installed the HTC ROM for the Tilt, and voila, I have a new phone, works nearly flawlessly.
Since then, I have installed Manila 2d (start with update 20, install everything included, then install the latest version) youtube/opera/google maps/audio manager/pictures etc. all work perfectly, installed the Manila2D v20 N2A patch which fixed the weather tab to show my home town, M2DC and applied a new skin, Total Commander (to move the edited weathercities file), Wstask (awesome), ATT Navigator, Windows Live (great for syncing contacts), and it works perfectly. It's fast. I can use my phone now without the struggle, and am happier than I've been in a long time.
I haven't heard anyone suggesting this so I thought I'd let everyone know. This is the phone I always wanted from my Tilt. I have to assume that the minor hardware differences between versions creates a problem with non-native ROM's, and if you are having problems I recommend trying a factory ROM made for your device, you may be pleasantly surprised.
Dustin
*edit* As I'm sure most know, there are hardware issues with the keyboard for many, this will obviously not fix those issues. However, I was able to fix the massive software issues I've had which also effected the keyboard. I still have a testy Y key, but it's not a huge issue when compared to what it was like before. My phone works great.
Correct Forum?
Flashed to the HTC ROM for the AT&T Tilt, download here:
http://www.htc.com/us/SupportDownload.aspxp_id=67&cat=2&dl_id=94
Soft reset immediately after screen alignment, and setup to avoid bloatware.
Adjusted settings for MediaNet:
http://forum.xda-developers.com/showthread.php?p=1632060#post1632060
Installed the following cab files (here's the files, install order, what to do, how to do it, etc. is up to you, try to search for yourselves, I'll try to answer questions posed, included iFonz, and a couple other cabs for the heck of it if you guys wanna play with em):
http://http://rapidshare.com/files/239391014/Cab_Files.rar
Read the following post for info on installing m2d:
http://forum.xda-developers.com/showthread.php?t=425851
To install telenav go to the following address from your phone:
ota.telenav.com/att/tnn
If you do it right, I think you'll be happy campers, enjoy!
Dustin
I've been having the same issues with my tilt as well. EXTREMELY annoying. I love the tilt, but hate that it constantly lags.
Do you have a link to the ROM from HTC?
The last ROM from HTC for the tilt gave me problems
Yes please post the link as i am also having this problem.
Thanks
Link inside!
Here y'all go. It's important to note that this is ROM build 1.62.502.0 and will change your radio to 1.27.14.09. Further info can be found HERE
HTC AT&T Tilt ROM
Different link to the Rom
Here is the link for the page HTC posted the Tilt ROM download if you would like to read first before downloading:
http://www.htc.com/us/SupportDownload.aspx?p_id=67&cat=2&dl_id=94
Hope this helps you guys. For me it was night and day. Let me know if this helps you guys.
Also, I wonder if there are any ROM cooks out there who are interested in cooking ROM's based on the Tilt ROM. That would be sweeet!!!
Dustin
*edit* I'm not sure about the ROM tmnt.mikey posted, but the link I've posted does not change the radio to that version, I flashed and have radio version 1.65.21.18. I'm not sure what radio I was using pre-flash (oops).
does this work with kaiser as well?
because at&t does not have the front camera...
so if i flash to this rom, will it render my front camera unusable?
not that it's really that important, i'd rather have my keyboard functioning well again.
other than that, is there any complication if i run this on my kaiser?
because in the HTC page, it's said... only for at&t tilt...
Kaiser ROM
I have no way to know if this ROM will work for the Kaiser, someone would have to try it out and let us know. I can't imagine it would brick the phone, but the keyboard layout is different, and the front camera thing. However, you might look for the latest Kaiser ROM from HTC then apply all the cabs you want and see if that works for you. I installed the ATT ROM, then did a soft reset before the apps were loaded to save space and clutter, then installed just the cabs I prefer.
It's been almost a week now, and it is still working perfectly. I've installed almost 20 different cabs, it is running faster, and more stable than it ever has. I love my phone now. The difference is stunning. I haven't had any issues thus far, and I've never experienced that before. I hit a button and it works, I touch the screen it works. I'm going off about it so much because I want everyone to know this phone is not a lost cause. I'm still a little in shock how well it works. I had written it off, and thought between HTC, and Microsoft that this phone was just going to remain a glitchy pain in the rear. My phone was so difficult to use that I almost stopped texting all together. I was practically marking off each day on the calendar waiting for the remaining year of my contract to run out.
Dustin
Hi all..
my keyboard also hard to be pressed (X,B,N and fn key),other keys are perfect (easy to be pressed)..
im wondering why did that happen..
im using WM6.1 official for TyTN II,,so nothing is cooked..
anyone knows how to fix this issue?
cause it's so annoying to press thoses button hardly..sigh..
thank you..
berramm2001 said:
Hi all..
my keyboard also hard to be pressed (X,B,N and fn key),other keys are perfect (easy to be pressed)..
im wondering why did that happen..
im using WM6.1 official for TyTN II,,so nothing is cooked..
anyone knows how to fix this issue?
cause it's so annoying to press thoses button hardly..sigh..
thank you..
Click to expand...
Click to collapse
i actually followed the link from dustintm...
but the download was not for my area (i'm in singapore)
and you can't download it anyways...
you need to key in your serial number...
and it has to match the region...
so if that really fixed the keyboard problem...
congrats to those guys in the same region as dustintm...
as for why it happened, i also don't know...
i read in some other thread that it's unlikely if it's dust or the rubber...
i also think it has to do with the ROM, since some days my 'a' keys works fine...
Asian TyTN II ROM
Hey Jonathan,
Here is the link to the HTC Asia download page for the TyTN II:
http://www.htc.com/au/supportdownloadlist.aspx?p_id=13&act=sd&cat=all
Just so everyone knows, this ROM change I am talking about does not fix hardware related issues. I still have a testy "y" key, it works most of the time, but I do have to press it harder at times.
Prior to my find, I was having massive keyboard problems, sluggishness, having to press each key multiple times, etc. I was also having similar problems with the touch screen too.
This will not fix a hardware issue (obviously?). But I've found the new factory ROM has made my phone operate almost without flaw... for the first time. Responsive, stable and consistent. I can deal with the "y", I couldn't deal the snetacnes loking lik tihs (sentances looking like this (all the time)), and all the other problems/lock ups, etc.
Dustin
Keyboard problems sound like a hardware issue. You should try to find a local cellphone store that does repairs.
There is one in L.A. that can fix this for under $50.
Keyboard Problems
I found that I was experiencing hardware (keyboard), AND software related issues (keyboard, touch screen, sluggishness, and lock-ups). After installing this ROM all software issues have disappeared. I am very certain of this. One example is that occasionally the keyboard would work almost flawlessly (with the exception of the y key) and other times it was a complete struggle, multiple keypresses to register once, delay, etc. That made it clear to me that I was having software related issues.
I imagine it could have been ROM issues, or software related conflicts, but either way, I have solved my problems. I flashed to the latest HTC ATT Tilt ROM, and the following programs/cabs:
HTC Enchasements
HTC Audio Manager 2.0
herg62123 FSP, DShow, WMP Yo...
HTC Album 2.0
Google Maps
XDA-SPC-Noonski HTC YouTube
herg62123 2DManila_1_20_19131...
Customization Customize_Tool
snctln M2DC
C. Ghisler & Co. Total Commander
Debarron Manila2D v20N2A Patch
Windows Live 10.6.0034.0800 (Fixed)
waku WkTASK
AT&T Navigator
XDA-Team Opal Volume Control
Systweak Inc Reg Cleaner
SJ SamsungOmnia_Driver_D3D
Massimo Colored Top Bar
ELF Calculator Skin
The EquinoXe Wizard ReTOUCHed...
JUVS HTC Enlarge Start Menu
HTC WMP Touch Skin
Moble Software Design, LLC FreeCaddie
J.S. Advanced Configuration Tool 3.2
Microsoft .NET CF 3.5
XDA-Team NEW M2D
Dustin
BTW Trjons thanks for your post.
be a hero post all your cabs or links
So, it is heresy you speak! Stock rom! Yeah, I too am sick of the laggy unreliable roms. WAY too much wasted time, energy and effort. Gone back to ATT even though on TMO. How about posting your cabs or links for the lazy ones of us out here?
davewaave said:
So, it is heresy you speak! Stock rom! Yeah, I too am sick of the laggy unreliable roms. WAY too much wasted time, energy and effort. Gone back to ATT even though on TMO. How about posting your cabs or links for the lazy ones of us out here?
Click to expand...
Click to collapse
Also, did you get rid of the AT&T bloatware on yours as well? On a quest for the perfect ROM myself, so I will keep watching the thread for more info.
Would like to see those links as well.
If you want to leave out the ATT bloat ware, after you go through the screen align, do a reset. It will fail to run the script for the **** add ons and then you have basically a virgin rom.
Cab files
Hey lazy people ! Here's a link to all my cabs:
http://rapidshare.com/files/239391014/Cab_Files.rar
I'm somewhat lazy too, so you're going to have to download all of them then pick through to get the ones you want. Enjoy!
Dustin
Thanks
Your're a hero! Thanks for the cabs
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
WHOA! Virus detected "win32/virut" after extracting file then accessing folder with "glossy black bars.exe"
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Hopefully I've removed the infected file.
I didn't know glossyblackbars.exe had a virus???
Don't need it anyway, I deleted it, recompressed the cab files and re-upped to rapidshare. I edited all my posts with the new zip link.
Please let me know if it's virus free now... so sorry!
Dustin
Thanks so much, Dustin!!! I think I will be loading the AT&T 6.1 ROM again, following your fixes, and praying that my 2-PC ActiveSync problem somehow gets resolved along the way, too. (We need a "crossing fingers" smilie! HA!)
I'm just not looking forward to setting my Tilt up all over again. Must wait until I'm in the mood.
Dustintm said:
I didn't know glossyblackbars.exe had a virus???
Don't need it anyway, I deleted it, recompressed the cab files and re-upped to rapidshare. I edited all my posts with the new zip link.
Please let me know if it's virus free now... so sorry!
Dustin
Click to expand...
Click to collapse
Hi everybody, I recently got a Diamond2 and found that the enormous amount of expertise and help available at xda-developers have really helped me enjoy this phone. The phone is not locally supported by any carriers or retailers in Canada so the availability of these forums have been a real help. I've run through most of the issues I've had with the phone (really like the Pro2 Interface better but was way to bulky) but have a few remaining that I haven't been able to find satisfactory answers for, hope you guys will be able to help.
I've downloaded and played around with what seem to be most of the prerequisite softwares: Advanced Config Tool, Klaxon, Changescreen etc. and have also made a couple of registry modifications to enable TF3D rotation and things like that. Here is where I'm getting into a bit of trouble. Although changescreen is a great app I just don't like to install a lot of things on my device and decided to try the regedit. After a soft reset it seemed to work great but was quite slow in switching over to landscape and back. At first I though this was a problem with the g-sensor so I opened up Opera to try it out and found that it was much faster. Obviously it's a lot less graphically intense but I was playing around with a Touch Pro2 before I bought the Diamond2 and it is also significantly faster, with the same processor and everything. I've tried to reduce the sampling time for the g-sensor down from 200ms to 100ms in ACT but that didn't really seem to help. Also I get some really weird lines across the tops of TF3D pages in landscape; in the All Contacts page for example the bar that contains "Search Contacts" will have at least three sets of distorted lines across it at regular intervals across the page. The wallpaper also seems to malfunction as instead of staying as it was, it will stretch across the width of the screen and as a result become extremely distorted. The dialer doesn't go into landscape but that seems to be a common issue. I've downloaded the Rhodium Phone Dialer although I haven't had a chance to install it yet, maybe that will fix the dialer issue.
I do have some app installed that changes the background of all tabs to be the same and this seems to have messed with the transparency of the tab bar and, occasionally the phone will fail to respond to screen swipes that would usually cycle through the tabs without using the tab bar. Maybe this app is also causing the other problems.
The help on these forums has already been a great asset and I was just hoping that I would be able to get some simple fixes for the issues with the landscape thing without having to install more software. Thanks in advance for any help, its all appreciated. Cheers.
PS, rom is 1.39.421.0 (47382) WWE
what you can do to improve things:
1. ditch stock rom and use tess rom
2. install flipit for rotation software - its better than the rest IMO
Thanks for the quick reply
Thanks for the quick reply, sorry I wasn't able to reply right away, got a bit busy at uni.
I was a bit apprehensive about installing a new rom but the one you recommended is amazing. The speed increase alone is unbelievable, doesn't even feel like the same device.
Everything is working great and the rotation is really fast now on everything except TF3D. It almost looks like it attempts to rotate and then fails. The title bars rotate around and then rotate back. I've added the regedit, manually removed and added it back into flip_it, but nothing seems to be working. Aside from that everything else seems perfect. Hope you'll be able to help, and once again, thanks.
oh yeah.. forgot to mention about manila in landscape
go to search and look for At0mAng & Danny_and_2 TF3D2 Tweak cab for topaz
install, and in the list of programs, there is option called Manila Rotate ON.
and thats it, you are all set...
hope this helps
joseph.sapri said:
1. ditch stock rom and use tess rom
Click to expand...
Click to collapse
Can I ask where to read and get this rom?
I am also new to Topaz.
Running on stock ROM
been reading around. reading on the various rom threads to decide which to use.
I am looking for something stable, fast (aren't we all?) and 6.1. Still got Manila and hopefully with Titanium built in. Also if possible with ringtones removed.
What would you recommend?
Thanks
Goondu said:
Can I ask where to read and get this rom?
I am also new to Topaz.
Running on stock ROM
been reading around. reading on the various rom threads to decide which to use.
I am looking for something stable, fast (aren't we all?) and 6.1. Still got Manila and hopefully with Titanium built in. Also if possible with ringtones removed.
What would you recommend?
Thanks
Click to expand...
Click to collapse
tess = topaz essential
http://forum.xda-developers.com/showthread.php?t=529260
Almost there
Thanks for the tip about the tweak program, installed it and followed your directions, manila is now rotating. However, its still incredibly slow; in the range of 3-5 seconds for transition to landscape and then around 1-2 seconds back to portrait. Also, those distortive lines I described earlier are back.
I was hoping for the kind of speed seen here http://www.youtube.com/watch?v=MPVgN5QuzO4 but I do realize that its a different rom. I've disabled and enabled TF3D and also done a soft reset, but no speed increase. I was thinking it may be a hardware issue but everything else works fine. One thing I have noticed though is that since installing this rom some programs get stuck half rotated and the other half of the screen will display the TF3D home page. Once again, thanks for all the help so far.
P.S. If I disable TF3D the blank today screen will rotate at the same speed as in that video if not faster. Also before when the menus rotated but not TF3D they were rotating at the same fast speed.
yes, I know what you mean.. at this stage, manila rotates pretty slow for me too...
I guess at the moment, we have to live with it... the slow rotation only happens on tf3d2 rite? the rest is ok...
as with hardware issue, I am sure it is not, cause topaz is still relatively new...
btw, Manila 2.1 is around, and manila 2.5 is coming too... so, maybe they would give better performance .
btw, the youtube link is a rom made by Tom Condon, and as you probably know, he is very active in building rom for topaz too... why dont you give him a message, or try his rom...
Tha
sorry double post again..
Sounds good
Glad to know that it wasn't just a one off issue. I'll give his rom a shot, was kind of wary b/c of the comments that said WM 6.5 was slow. Would you be able to direct me to somewhere that I'd be able to download TF3D 2.1 alone without a rom upgrade or anything or maybe even cooked into the TESS rom. Thanks for the incredible quick reply and for all the help so far.
mukhan said:
Glad to know that it wasn't just a one off issue. I'll give his rom a shot, was kind of wary b/c of the comments that said WM 6.5 was slow. Would you be able to direct me to somewhere that I'd be able to download TF3D 2.1 alone without a rom upgrade or anything or maybe even cooked into the TESS rom. Thanks for the incredible quick reply and for all the help so far.
Click to expand...
Click to collapse
if you follow tess forum, then the next release would have manila 2.1
Thanks
Ye, sorry about that didn't quite follow the forum all the way, I guess I'll be waiting. Thanks man.
Hi there... im pleased with myself for having dumped the stock ROM (4 Raws) and then going through the HSPL, which i checked is good!!
ive got my touch to use WiFi and not 3G when using the net at home even tho im on Orange Uk which is supposed to be set to 3g only etc
but i want to got WM 6.5 but am so unsure of which version to use... tbh i can seem to find out which release has what functions, no language stated as i read some where spanish or something lol!
i just see V12, V13 V14 to download etc no real explanations as to the content... Well not for a novice anyways..
so i know it may have been asked before but would someone (or many) please point me in the direction of something that is stable with no known major issues (such as wifi not working or something) and looks nice/fucntions smoothly...
if possible!
thank you so much to all that have helps via the modding topics and all those that reply here!
thanks!
Dave
A lot is down to personal preference
I have Jade Overloaded WM65 OS 5.21806 OEM 2.33.721.1 on my device, try it see how it goes if you don't like it try another.
go here http://forum.xda-developers.com/showthread.php?t=524102
can i simply put a rom over the top of the other then??
i am a real novice but trying to learn been on here hours going through dumping and the hspl... slowly but surely!
there are a few areas still im still in the dark about...
1) i regedit all the time on pcs and lappys etc but how do you on the fone?
2) still a bit vague on how to actually install the roms...
i have jade customRUU, but i read that was for just updating the splash and something else without installing a whole rom? i could be well wrong but im sure i did read that!
just not sure what to do tbh! lol!
thank you so much for your rom suggestion and if you could shed any light on my other qu's i'd appriciate it so much!
thanks again!
Dave
Yes you just flash it over old rom, its like upgrading a pc it wipes all personal stuff etc
to edit registry you need prog like total commander
go here http://forum.xda-developers.com/showthread.php?t=514406 you will find all you need to flash new roms on your phone
My advice for WM6.5 is to wait for the official Microsoft release, that is September 2009 (hopefully). All of WM6.5 ROMs on this site are beta, so they all have bugs. From all of them i'll recommend pdaviet's v14, but it's only my personal opinion.
If you still want to flash, just read this post
http://forum.xda-developers.com/showthread.php?t=514406
and knock yourself out!
Good luck!
thanks lex i went with flubs recommendation and while its great there are some things im not too keen on!
i love the wifi side of things and how thats a priority over using the 3g etc
still cant get the weather to function tho... as you say im sure things will improve once the official release comes
having same probs with weather myself.
like lex said all are beta and have some bugs, you just gotta find one your happy with for me personaly its Jade Overloaded WM65 OS 5.21806 OEM 2.33.721.1 the weather function is no prob I will sort it out hopefully but if not I can live with it I will just remove it from home screen LOL
yeah still working out how to do things... being my 1st wm system...
wanna change the order in start menu..
quick link/button to turn wifi on/off
change the homescreen both features and order...
change the background as that is a little disappointing lol
i was looking at the manila 2d is it? but seen so many people having issues with it im not sure i wanna install it!
lol lots of reading searching to do :-( haha!
If you flashed the overloaded rom I suggested then you have touch flo installed you need to go to settings / today items tab and select touchflo
if you wanna change order in start menu you can select and hold an item menu will opo up saying move to top
hi flub!
seems i was running with Windows Default... which i actually liked.. but if i select something else that deselects :-(
i just have touchflow selected and pressed ok... i like the layout gonna take some gettin used to! lol
i went to the weather options removed what was there and selcted add to be presented with a full list of towns etc...
selected the one closest to me.. it updated and is working!!!!
pitty the default wont work tho! will run with the touch system from now then!
thank you so much! your help/advice is very appriciated!
Dave
hey flub...
do you know how to stop the sms's appearing as a conversation?
i want recieved messages in the inbox not conversation files including sent and recieved stuff...
quite rediculous...
DJHicks said:
hey flub...
do you know how to stop the sms's appearing as a conversation?
i want recieved messages in the inbox not conversation files including sent and recieved stuff...
quite rediculous...
Click to expand...
Click to collapse
you can use a registry editor then navigate to the following registry key:
HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings\OEM\
Under the registry key, create a new DWORD value with value name as SMSInboxThreadingDisabled and set it value data to 1.
or here is a cab file to disable sms conversation http://www.ziddu.com/download.php?uid=a6uanZema7OelOKnZqqhkZSrY6ybl5mo6
Well Flub you truely are a star!!
fully appriciate all the help you've given me!
will most prob go for the cab hehe!
thanks again!
Dave
hi
thanks i was looking for such a cab i used to use advanc configurator to disable my thread view this makes it easier thanks for the same
flub said:
you can use a registry editor then navigate to the following registry key:
HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings\OEM\
Under the registry key, create a new DWORD value with value name as SMSInboxThreadingDisabled and set it value data to 1.
or here is a cab file to disable sms conversation http://www.ziddu.com/download.php?uid=a6uanZema7OelOKnZqqhkZSrY6ybl5mo6
Click to expand...
Click to collapse