Hi, I am new here and I need some help, I flashed my Ext ROM and added some applications on it and every thing works alright. But I am unable to get the XDA 2i automatic soft reset after installing an Hard reset, and since some applications needs clicking Ok button after Installation, i am looking for something to do that job. I remember reading somewhere in these forums and i spent a long time searching back but could not find where it is. I would be gald if somebody could help me.
Cheers.
peavey said:
Hi, I am new here and I need some help, I flashed my Ext ROM and added some applications on it and every thing works alright. But I am unable to get the XDA 2i automatic soft reset after installing an Hard reset, and since some applications needs clicking Ok button after Installation, i am looking for something to do that job. I remember reading somewhere in these forums and i spent a long time searching back but could not find where it is. I would be gald if somebody could help me.
Cheers.
Click to expand...
Click to collapse
hi there,
i'm also quite a newbie too, and i recently created a modified rom using Bal666's cool utility. i think i understand your problem with being unable to use the screen after a hard reset.
The problem is that the config.txt file runs a program called "tpdisable.exe" before installing the .cab files, to prevent users interfering with the install process. Simply delete this entry from config.txt in your extended rom image and burn again!
hope this helps!
thanx i will try and post u how it goes
thanx i will try and post u how it goes
PC crashed while updating ROM
does this make any difference - i've re-booted my laptop and am currently sat on the checking device info screen, how long does it take to check as its been a good 30 mins now..
any help appreciated
Put your device into bootloader mode before you try updating it, it might work a little better.
Remove the entries for tpenable and tpdisable from the config file and the rom itself.
If you want to stop those "This program is designed for...." screens, download WinCE CAB Manager and change the min and max OS versions to 4.21 and 5 respectively on the cabs you are putting into your extended rom.
Good luck.
HI pug thanks for reply, I have a question here...
When installing programs from ROM, some programs may need pressing "OK" to continue. Is there anyway this can be done automatically or can anything be changed in the cab file so we can stop that screen from comming up????
Any help apperciated.
Thanx in advance
Sorry PUG i think u already answered my question SORRY
changing the min and max os ver. with wince cab manager didn't work.probably b'coz the os detect the source build in version, not the cab version.
Hi guys,.. i have been trying to upgrade my P3600 over 2-3 weeks now but i reach the same problem always, and that is simply.... I have managed the RADIO Rom to 1.41.00.111, but when i try to update the operating system.. with... Lvsw 2.0.1.1 / Mary 2.0 / PDAVIET 3.00.07.09 ... everything goes far with the updating.. i can see the progress bar, it reaches 100%, the screen on my mobile goes black... and it says on my computer to follow the info on my mobile and close the update application.
Now at this time my mobile is totally black (shut off i guess)... i have waited for more than 5 minutes but since nothing happens, i have restarted the mobile with a soft rest... but after the rest i still have my OLD operating system....
What am i doing wrong?.... I have read through bunch of threads on the forum, but haven't seen anyone else whom have had this problem.. or is it simply that i should wait even longer time and the mobile should start up by itself?....
Appreciate any help & suggestion...
can anyone help me?...
I've tried to update my HTC3600, by using the "WM6 Official - Any Device" from http://trinityguide.info, and it just doesn't work... I have updated Hard-SPL, and then tried to apply "Official Dopod ROM" ... the only thing it did was to revert my Radio-ROM back to 1.46.xxx (from 1.50.xxx i had before)...
But the OS was never updated to WM6... I have tried a bunch of different WM6 ROMs now during the weekend, nothing has helped... even tried some application to unlock CID (what is it actually ???).
The only thing I've managed is to update my own OS using the official swedish ROM (I've bought my HTC in sweden). And i've been able to update my Radio ROM to 1.46.xxx, 1.50.xxx.. as well as installing different HARD-SPL.
But i've so far not been able to install ANY WM6, or WM5 cooked ROM's .. so pleaaaaaaase help my guides... I'm starting to go nuts over this...
Appreciate any advise & help.. thanks in advance !
Hey everyone. I'm tearing my hair out trying to get this sorted but I just don't know what to do!
So, when I got my X1 as everyone on here should do, was flash my X1 with the HardSPL and some custom roms, this was a few months back. Then, shock! Horror! My case went and broke, (cracked near the volume button build W44) so I sent it back to SE for repair. I sent it back reset back to defaults but left the hardspl on there.
SE sent me a brand new phone (I think... This one says under the battery build w50, but the battery says w32..) I received it today. I thought it would be my old one repaired but SE had other ideas. Booted up and have Image Version: 1.03.931.10 and HardSPL 72.000 I think I said that correctly...
Now since sending it for repair and receiving it back, their seems to be quite a few wm6.5 roms floating about, and obviously I can't use the stock software as that wouldn't be right!
Now I have tried flashing the hardspl to the phone through my Vista PC and all it keeps giving me is connection errors. I thought maybe it was already flashed so I tried flashing just a rom, and that just made the phone get stuck on loading (flash by memory card). I thought it might be Vista, so I tried doing it on my other PC (XP) and I get the same issue. This bloody thing won't flash!
I have had "Connection Problems" - "Update Errors" with different numbers. The current one being Error [260] CONNECTION.
Now I have been searching around through the hardspl thread and other places trying to find out what I need to do or how I can fix it, but everything I try doesn't make a difference. I did read some other people with recently repaired phones having the same problem and perhaps SE have put a new spl thingy-ma-jiggy on there. (Please forgive the technical jargon, I have no idea what im on about.) I have also tried the ticking/unticking advanced network functionality, but that hasn't made a difference either.
So by the end of typing this, I have little hair left. Let's hope you can all help, before I have none left!
I would appreciate ANY help! Really.
Just wanted to add, I was at first getting the phone to a loading bar when flashing, but it would stay at 0% then flag up an error on the PC. Now after the tri-colour bars, the phone just sticks on Loading...
Well just to update. I have been trying to sort this since posting. I flashed the rom to an old UK generic one, as I read in another topic people had to do that before HardSPL. Done that, and tried flashing the hardspl. Same thing, just getting connection errors.
I tried going into bootloader and running the hardspl from there. It works and the phone gets to 10% and then gives an UPDATE ERROR. The phone is now bricked, and I have to reflash the original wm rom to get it back.
Though the Tricolour screen now shows 0.52.Olinex
Any ideas?
Shameless bump for help.
very stupid situation.
i have the same situation in puncto of flashing.
i get my phone three month ago.
after hardspl i .... sorry, no hardspl ... the phone says at 0% bla bla bla
i solve the problem by consulting one night absolutly stressing again and again and again .... google ... xda ... google
than 3 thinks at one time was the solution:
0. need activesync - connect !!!!
1. SDA_ApplicationUnlock.exe for desktop pc
2. enterbootloader.exe for pocketpc (please, the right version, it exist for eten too, but we need the xpediaversion ..)
3. changing registry-entries
how to:
activesync-connect, than copy "enterbootloader.exe" to pocketpc. it must be root, not sd-card. use a pocketpc-registry-program to change these values :
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001001 = 1
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001005 = 40
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001017 = 144
HKEY_LOCAL_MACHINE \Security\Policies\Policies\0000101b = 1
if not exist than add the key.
now, start desktop-program, follow instruction EXCEPT reboot.
start "enterbootloader.exe" on pocketpc. now, you can install hardspl and the device is flashable for ever.
thats works on me, hope it could help you too.
Thanks for the reply. Not had time to try it till this morning. Ok so, after spending about an hour trying to find the correct enterbootloader.exe I finally realized, that the hardspl package includes it. *Duh!* So that was time wasted.
I changes the registry values as you said with Resco registry editor, and follower the unlock then enterbootloader.exe Start HardSPL package. Starts to install. Gets to 10% then I get
ERROR [262] : UPDATE ERROR
The rom update utility has encountered communication errors during the update process.
So im open to suggestions if anyone has any. I just can't understand why it's not working. It's not a problem with my computer or cables. I flashed the phone before I sent it for repair and I have tried doing it on two computers one with XP 32bit and one with Vista 64bit.
hmm. would u like to install a custom rom, or a stock rom?
msg me, and i hope, i can halp u.
I want to have the hardspl on there so I can flash custom roms.
If it's a case of the software/firmware/hardspl whatever you call it, has been updated by SE. How would one go about getting it flashed? Would we have to wait for an update HardSPL to be released?
U read this thread?
My first hardspl was from this thread. New X1 will come tomorrow back from SE (vibration was defect +++ some more problems with case), and i will try it again with this thread.
hope, this will help u mate.
Yeah, I have been through that thread with a fine toothcombe trying everything suggested to see if I can make it work.
When you get yours back, if you have to do anything out of the ordinary to get it to flash or can't do it. Please come and let me know in this thread. If they have updated yours like mine, and yours won't flash, at least I won't be the only one!
k, i will msg u tomorrow around 2pm.
Cheers.
In the meantime. Does anyone have any other suggestions I could try?
Bump, for some help.
now i know, what is exatcly your problem.... <--- SAME Problem
i hope, i will find a solution and msg u then. if u´ll got a solution for this prob, msg me too plz.
Solution found in this Thread!
Download this and unzip it to your device. ++ run it. It will start your X1 in Bootloader menu and say "0.52.OliNex".
Then start hardspl while X1 is in Bootloadermenu....
FINISH =)
Thanks for the reply matey. Glad you got yours sorted. Just tried what you said and I get 0% then it switches to ERROR [262] : UPDATE ERROR.
vwrmic said:
Thanks for the reply matey. Glad you got yours sorted. Just tried what you said and I get 0% then it switches to ERROR [262] : UPDATE ERROR.
Click to expand...
Click to collapse
hmmm... it works fine on my new x1. are u sure, that u start the ssplmanual on your x1 and not on your computer?
Yea, im not sure what the problem was with it. Thankfully I have it done and dusted today! Because I flashed it earlier to an older official version, and you said you got it working. I presumed you had - had yours flashed to the newest version due to it being off for repair. So I reflashed the official update and fully updated it. Then tried hardspl which didn't work. Tried with the advanced USB thing off, tried again with how you said you did it above, and Viola!
Hip hip hoorah! Thanks for the help. Can finally use me bleedin phone now!
no problem mate hf with your x1
hello,
i see smilies and yea's ...
for me to understanding (for next time or other users):
1. complete official update (if exists)
2. flashing (hardspl) without "advanced usb"
thats all?
cool.
Hello, I am new here. I tried to change the rom in my SE X1 myself.
My first problem was on the first step.
I opened hardSPL, the program found the phone. But it doesn't update it. After 30 seconds it says: Error 202: CONNECTION
but I connected it, activesync is open??!!!
And do I make everything right?
1.) HardSPL - to open the phone for the new rom
2.) how to get new rom on the phone?
3.) how to make it to a perfect end?
please help me, I tried to read me through the forum, but now i am confused.
thank you
best regards
daniel
Strogach77 said:
Hello, I am new here. I tried to change the rom in my SE X1 myself.
My first problem was on the first step.
I opened hardSPL, the program found the phone. But it doesn't update it. After 30 seconds it says: Error 202: CONNECTION
but I connected it, activesync is open??!!!
And do I make everything right?
1.) HardSPL - to open the phone for the new rom
2.) how to get new rom on the phone?
3.) how to make it to a perfect end?
please help me, I tried to read me through the forum, but now i am confused.
thank you
best regards
daniel
Click to expand...
Click to collapse
After you have succeeded in installing the HardSPL you have to download any ROM that you want to try on this forum. I suggest that you use the MicroSD method as it is much easier than updating it using your PC. Try reading this thread, if you still have not.
http://forum.xda-developers.com/showthread.php?t=446070 and also this one (for flashing ROM's using MicroSD method) http://forum.xda-developers.com/showthread.php?t=445662
You can also read this thread for a more comprehensive tutorial http://forum.xda-developers.com/showthread.php?t=497511
Hello,
I need some help with my HTC Blackstone. After numerous attempts to upgrade my ROM to Miri_WM61_21054_Manila_2.5_V2.1.rar and EnergyROM BLACKSTONE 20090829 StandardM2.5.rar (WM6.5) I succeeded in “breaking” my phone.
My ROM version was 1.56.401 (installed the update from htc.com: RUU_BlackStone_HTC_Europe_1.56.401.0_Radio_52.62.25.34_1.13.25.24_Ship.exe).
First I tried the EnergyROM using the HSPLWrapper_Blackstone_156OliNex.exe and SSPL-Manual-TouchHD.exe but I kept getting the 262 and 260 errors. After I downloaded the Miri_WM61_21054_Manila_2.5_V2.1.rar and also tried with the HSPLWrapper_Blackstone_156OliNex.exe and SSPL-Manual-TouchHD.exe and I kept getting the same errors. Then I had the brilliant idea to try the BlackstoneRUUWrapper.exe that was in the Miri archive. The progress bar went from 0 to 100% in 3sec and then I realized that I did something bad.
Now everything is in green tones on my display but when I turn it off and then back on the colours come back to normal. Also the Windows is working very very hard. I managed to sync it with the PC and install the ROM from HTC website RUU_BlackStone_HTC_Europe_1.56.401.0_Radio_52.62.25.34_1.13.25.24_Ship.exe but I have the same problem.
Can somebody please provide a solution to fix my phone.
Thanks
Read the dummies guide http://forum.xda-developers.com/showthread.php?t=505377
Post anything further in that thread, no need to create new threads.
haqx said:
Hello,
I need some help with my HTC Blackstone. After numerous attempts to upgrade my ROM to Miri_WM61_21054_Manila_2.5_V2.1.rar and EnergyROM BLACKSTONE 20090829 StandardM2.5.rar (WM6.5) I succeeded in “breaking” my phone.
My ROM version was 1.56.401 (installed the update from htc.com: RUU_BlackStone_HTC_Europe_1.56.401.0_Radio_52.62.25.34_1.13.25.24_Ship.exe).
First I tried the EnergyROM using the HSPLWrapper_Blackstone_156OliNex.exe and SSPL-Manual-TouchHD.exe but I kept getting the 262 and 260 errors. After I downloaded the Miri_WM61_21054_Manila_2.5_V2.1.rar and also tried with the HSPLWrapper_Blackstone_156OliNex.exe and SSPL-Manual-TouchHD.exe and I kept getting the same errors. Then I had the brilliant idea to try the BlackstoneRUUWrapper.exe that was in the Miri archive. The progress bar went from 0 to 100% in 3sec and then I realized that I did something bad.
Now everything is in green tones on my display but when I turn it off and then back on the colours come back to normal. Also the Windows is working very very hard. I managed to sync it with the PC and install the ROM from HTC website RUU_BlackStone_HTC_Europe_1.56.401.0_Radio_52.62.25.34_1.13.25.24_Ship.exe but I have the same problem.
Can somebody please provide a solution to fix my phone.
Thanks
Click to expand...
Click to collapse
connect ur phone in active sync mode with ur pc.
then run the HSPL olines wrapper.
ull enter a tricoloured screen which will say 1.56.OLINEX.
disconnect and reconnect ur USB cable.
Run the EXE in the downloaded ROM.
ull be ready with the new rom..
this is assuming u have Win XP. for other OS u need to dnload drivers from the thread mentioned in the above post.
Generally speaking if you are experiencing discolourization it is because your SPL is incorrect.
Check your SPL in bootloader. Then follow this guide. Any future queries regarding flashing should be posted in that thread and myself or others will help you. If no one responds PM me and I'll respond next time I'm online.
Thread closed
Ta
Rick