Hi all,
Does anyone have experience with making your own CAB file that contains your personal settings, such as:
- Owner info
- Common program settings
- Telco network settings (MMS, SMS, etc)
I want then to include this CAB in my Ext ROM, so I don't need to go through customizing after each Hard Reset.
A small tut would be great, and I will post this in wiki.
Thanks!
Hi HappyGoat.
I don't know if can help you, but try this:
http://www.customcabbage.co.uk/
At least for smartphones is working... Just a shot but... :roll:
hi happygoat
i really dont know if blueangel and himalaya have the same registry configuration ..
but in himalaya you can find the Owner and Notes information in this registry Section(suggest to set it already and then export it with registry editor)
HKEY_CURRENT_USER\ControlPanel\Owner
"Notes" -> is for the Notes of Owner Information
"Owner" -> is for Personal Information
for Regional Settings(set the value already then just export the entire key)
HKEY_LOCAL_MACHINE\nls
for Clock GMT (set the value then export the entire key with regedit)
HKEY_LOCAL_MACHINE\Time
and in here(sometimes needs to set both)
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Clock
for Changing the Default SIP
HKEY_CURRENT_USER\ControlPanel\SIP
"DefaulfIM" <- Change the value of this depends on SIP DestID(can be found in CLSID look for the Key with "IsSIPInputMethod" Subkey)
example: (Dont use this search for the SIP DestID in your device sometimes it differ in different device)
Keyboard -> {42429667-ae04-11d0-a4f8-00aa00a749b9}
Block Recognizer -> {42429691-ae04-11d0-a4f8-00aa00a749b9}
Letter Recognizer -> {42429667-ae04-11d0-a4f8-00aa00a749b9}
Transcriber -> {F0034DD0-2AD4-11d1-9CB0-E84BE8000000}
Phone Pad -> {51A2CB38-154E-4C92-A625-A83871C99EC2}
HKEY_CURRENT_USER\ControlPanel\SIP
Make the SIP Drageable
"DragStyle" <- Set 1 to make the SIP Dragable, 0 to fix Position or not movable[
WORD Completion Settings
HKEY_CURRENT_USER\ControlPanel\SIP
"SuggAutoCorr" <- 1 if AutoCorrect or Replace text as you type, 0 if not
"SuggChars" <-Number of letters before suggesting a word/s
"SuggWords" <- Number of Word/s to be suggested, set 0 to disable Word Suggestion
"SuggSpace"-> 1 to add space after suggested word, 0 if not
to Change the Default Control Panel Program Location goto
HKEY_LOCAL_MACHINE\ControlPanel
on each Control Panel Module key
set the value of "Group" to this
0 -> to locate it to Personal Tab
1 -> to System Tab
2 -> to Connections tab
for example to change the Buttons Setting location goto
HKEY_LOCAL_MACHINE\ControlPanel\Buttons
change the value of "Group" to 0 so you will see the button settings in the Personal Tab, 1 if you want to System tab, or 2 if you want to locate the Button setting in the Connections tab
Unhide Control Panel Program
remove the "Redirect" value in the following
Policy or AdminPassword
HKEY_LOCAL_MACHINE\ControlPanel\AdminPassword
Old Backlight Settings
HKEY_LOCAL_MACHINE\ControlPanel\Backlight
Contrast Settings
HKEY_LOCAL_MACHINE\ControlPanel\Contrast
Old Power Settings
HKEY_LOCAL_MACHINE\ControlPanel\Power
Change the Device ID
HKEY_LOCAL_MACHINE\Ident
"Name"-> Device Name
"Desc"-> Device Description
anyway little late here but i got more .. ill finish tomorrow including how to create GPRS and MMS Settings cab .. nyt
Excellent work....nice!
I will test this and see if the keys are the same...and noticed that most of the keys are the same, handy!
Looking forward to PART II...
If all is working, I will add this to wiki, coz I think it is very handy...
Well there goes the project I was working on, thanks for all the info...
wstahlhut said:
Well there goes the project I was working on, thanks for all the info...
Click to expand...
Click to collapse
Well, you can ALWAYS add your stuff and findings...!
tnx happygoat
anyway heres some additional registry settings .. ill start with those already been posted here in this forum ..
Turn On Bluetooth Profile
[HKEY_CURRENT_USER\Software\HTC\BTProfile]
"ON"=dword:00000001 ->0 if off
SMS Notification Always On
[HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings]
SMSDeliveryNotify = dword:00000001 ->0 if off
Disable SMS Sent Notification
[HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox\Settings]
"SMSNoSentMsg"= dword:00000001 ->0 if Enable
Phone Ringtone Script [HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0]
change the value of "Script"
heres the code
a - stands for display
r - repeat/replay the script again
c - sets the volume C50, c150, c100
f - means flash .. f1 flash for 1 second and f0 stands for flash continuously
p -means play ringtone
v- vibrate then incorporate with number to state how many seconds it will vibrate example. v3 vibrate for 3seconds or v0 for continous
w - stands for wait or pause then specify how many seconds like w3(wait for 3 seconds)
heres the example
Flash - af1w60f0
Ring - apw3r
Ring Once - ap
Increasing Ring - c50apw3c150r
Vibrate Then Ring - v3w3apw3r
Vibrate - av3w3r
Short Vibrate - av1w3r
Vibrate Long Then Ring - v3w3v3w3apw3r
Vibrate And Ring - av0pw3r
Increasing Ring And Vibrate - c50apv3w3c150r
Fast Vibrate And Flash - af1v1w1f0r
Vibrate and Ring Continously without pausing - av0pr[/b]
Album -> enabling Hidden "Editor" Options
[HKEY_LOCAL_MACHINE\ SOFTWARE\HTC\Album\ DisableEditor]
"Disable" -> Set 0 to Enable and 1 to Disable
---------------------------------------------------------
now the other registry setting that only works after soft reset ..
set Display name in Contacts
[HKEY_LOCAL_MACHINE\SOFTWARE\contact\cproghook]
"FL"-> Set 0 if LastName then FirstName, 1 if FirstName then LastName
Changing the Message Sent Notification Message
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Inbox\Svc\SMS]
Change the Value "MessageSent" to whatever you like the Default is "Message Sent"
Microsoft Bluetooth Stack Status after Softreset
[HKEY_CURRENT_USER\Software\Microsoft\Bluetooth\Settings]
"ScanMode" -> set 7 if Discoverable, 5 Turn on only, 0 if OFF
Broadcom/Widcomm Bluetooth Stack Status after Softreset
[HKEY_LOCAL_MACHINE\SOFTWARE\WIDCOMM\BtConfig\General]
"StackMode" -> 0 means Bluetooth OFF, 1 Means Bluetooth ON
Broadcom/Widcomm Discoverable and Connectable
[HKEY_LOCAL_MACHINE\SOFTWARE\WIDCOMM\BtConfig\Filters]
"WhoAllowedToConnect"-> if 0 No one allow to connect, 1 if All Devices allow to connectble, 2 if Paired Devices Only
"AllowOthersToDiscover"-> 0 if Bluetooth Undiscoverable, 1 if Discoverable
Broadcom/Widcomm Device Identification
[HKEY_LOCAL_MACHINE\SOFTWARE\WIDCOMM\BtConfig\General]
"UsePocketPCName" -> 1 if you want to uset the Pocket PC Device ID Name, 0 if you want to set on your own Device ID
"DeviceName"-> Preffered BroadCom/Widcomm Device ID
Broadcom/Widcomm Setting maximum Simultaneous Connection
[HKEY_LOCAL_MACHINE\SOFTWARE\WIDCOMM\BtConfig\General]
"MaxSimultConnections"
Changing Starting Page in PIE
[HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main]
"Start Page"="http://forum.xda-developers.com" <-example
Setting Cleartype Text in PIE[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings]
"ClearTypeText"<- Set 1 to Enable Cleartype in PIE, 0 to Disable
Setting ClearType Text in Pocket PC thru Registry
in [HKEY_LOCAL_MACHINE\System\GDI]
Create a Subkey then Name it "CLEARTYPE"
Settings Screen Text Size thru Registry
[HKEY_LOCAL_MACHINE\ControlPanel\Stylus\96DPI]
"CurFont"= change to the ff value ..
dword:00000258 -> Smallest
dword:000002BC -> Smaller
dword:00000320 -> Normal/Default
dword:000003E8 -> Larger
dword:0000044C -> Largest
SCREEN ORIENTATION
Set the Screen Orientation thru Registry and works only after soft reset
[HKEY_LOCAL_MACHINE\System\GDI\ROTATION]
Change the Value of "Angle" to the FF:
dword:00000000 or dword:00000360 -> Portrait Mode
dword:00000090 -> Landscape(Right-Handed)
dword:00000180 -> Portrait Up-side Down
dword:00000270 -> Landscape (Left-Handed)
Hide/Unhide Screen Orientation Option in Screen Module[HKEY_LOCAL_MACHINE\System\GDI\ROTATION]
"HideOrientationUI" -> set 0 to unhide, 1 to hide
Set Fix Landscape(Right-Handed) Mode and No Landscape(Left-handed) in Screen Settings
[HKEY_LOCAL_MACHINE\System\GDI\ROTATION]
"Landscapefixed"-> set 0 if disable, 1 to enable
okih still got lots of settings will continue tomorrow ..
Excellent toenailed...
I will start a nice wiki on "How To Make Your Own PersonalSettings.CAB file"
Looking forward to also include your basic network settings (for SMS and MMS etc.).
Thanks again for your elaborate work.
HappyGoat said:
I will start a nice wiki on "How To Make Your Own PersonalSettings.CAB file"
Click to expand...
Click to collapse
I have made a .reg file with all my settings. I'll post it here.
Download "WinCE CAB Manager".
With this, you can make your .CAB file.
Make a new CAB or open an existent file that you want to install and import the .REG file in that CAB.
Save it.
Copy to PDA and test it!
The better way to do a REG file is hard reset the device, export all the registry, customize all that you want and export all the registry again.
Copy to desktop PC, compare it (I use Compare It!), and make your XDAcustom.reg file.
Sergio_Bandeira said:
The better way to do a REG file is hard reset the device, export all the registry, customize all that you want and export all the registry again.
Copy to desktop PC, compare it (I use Compare It!), and make your XDAcustom.reg file.
Click to expand...
Click to collapse
That is indeed a nice idea...excellent, I will add it to the HOW-TO in wiki.
Thanks!
Button Lock
Hey,
Does anyone know where the registry key for button lock is?
MMS Configuration
HappyGoat said:
Excellent toenailed...
I will start a nice wiki on "How To Make Your Own PersonalSettings.CAB file"
Looking forward to also include your basic network settings (for SMS and MMS etc.).
Thanks again for your elaborate work.
Click to expand...
Click to collapse
Tnx HappyGoat ..
About the MMS Settings it can be found in this Registry Section ..
if You want you can set your MMS Configuration then Export The Entire KEY
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config]
But important Configuration can be found in this section
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1]
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\UI]
but heres a little understanding about the some important Registry Input
Setting The Server MMS Settings(MMS Settings->Server )
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1]
"1"="Globe"->Indicate the index 1 of Server MMS Settings.. identify in [HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1] example "Globe" look below
"2"="test"->Indicate the index 2 of Server MMS Settings.. identify in [HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1]
"DefaultSetting" -> Set which is the Default Server example set 1 if you want to set "Globe" or 2 if you want the "test".. setting 0 will indicate no Default Server Settings
"TotalSettings" -> View how many Server Settings Viewable, set 1 .. and only the Index 1 or "1" will be view in MMS Settings->Server Tab, 2 if you want "1" and "2" will be view .. etc
to create a Server Information
Create a Subkey in this Registry
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1]
under the SUBKEY create the following Reg value
Name -> String (REG_SZ)
Gateway-> String (REG_SZ)
GatewayPort -> DWORD(REG_DWORD)
MmscURI-> String (REG_SZ)
SendDefault-> DWORD(REG_DWORD)
RecvDefault-> DWORD(REG_DWORD)
Example of Server Configuration of "test" and "Globe"
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\test]
"Name"="Sample Server" -> Indicate the Server Name
"Gateway"="0.0.0.0" -> Gateway Address
"MmscURI"="http://" -> the Server Address
"GatewayPort"=dword:000023F1 -> the Gateway Port Number(in decimal 9201)
"SendDefault"=dword:00019000 -> Sending Size Limitation ex. 100K= 19000HEX
"RecvDefault"=dword:0007D000-> Receiving Size Limitation ex. 500K= 7D000HEX
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\Globe]
"Name"="Globe Telecom" -> Server Name
"Gateway"="192.40.100.20" -> Gateway
"MmscURI"="http://192.40.100.22:10021/mmsc" -> the Server Address
"GatewayPort"=dword:000023F1 -> the Gateway Port Number(in decimal 9201)
"SendDefault"=dword:00019000-> Sending Size Limitation ex. 100K= 19000HEX
"RecvDefault"=dword:0007D000-> Receiving Size Limitation ex. 500K= 7D000HEX
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\UI\SizeLimit]
"SendCount"-> Setting how Many "Sending Size limitations" listed in DropDown Listed ..
"SendDefault"=dword:00019000 -> Setting the Default Send Limitation
"SendLimit1"=dword:0000C800 -> Send Limit one can be change ex. 50K=dword:0000C800
"SendLimit2"=dword:00019000 -> Send Limit two can be change ex. 100K=dword:00019000
"SendLimit3"=dword:0003E800 -> Send Limit three can be change ex. 250K=dword:00003E800
*Sending And Receiving Limitations will depend on your Telco Network .. in some country the maximum sending and recieving is only 100K
Setting The Preferences MMS Settings(MMS Settings->Preferences Tab)
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1]
"SendDelayedNotifyResp" -> Set 0 if You want "Retrieve the Messages Immediately", 1 if you will just notify about the MMS receive and will not Download the messages until you tap the download button in the message
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\UI]
"DownloadHomeNetworkOnly" set 0 to "OK to Download when Roaming", 1 if you want Download only on the Home Network
"DefaultResolution"= Setting the sending "PHOTO RESOLUTION" on FF:
dword:00000000 -> QQVGA(160x120)
dword:00000001 -> QVGA(320x240)
dword:00000002 -> VGA(640x480)
dword:00000003 -> Original
"ConnectionVia"="Globe MMS Settings"-> Setting the Connect Via: .. ex Globe MMS Settings or The Internet
"SaveSentMessage"->set 1 if you want to Save the Messages in the Sent Folder, 0 if not
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\UI\TryLimit]
"TryDefault" -> Setting the "Attempts Before Giving UP" Connections
input 0 if will not Give up or 1 to 5 depends of how many tries you want
Other Settings
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\UI]
"MaxSlides"=-> Setting the Maximum Slide that you can create .. Default is 9
"NeedLoadSimCard"-> Setting 1 will load all the contacts in your SIM card, 0 if not
"CaptureVideoEnable"-> Set 1 to Enable the "Capture Video ..." options or able to capture video in MMS Composer, 0 if not
"CameraEnable" ->Set 1 to Enable the "Capture Picture..." options or able to capture Picture in MMS Composer, 0 if not
"AlwaysChooseCustom"-> 1 if you want to Always Choose the Custom MMS template, setting 0 will always popup a MMS template everytime you want to create a MMS
"AutoResend"-> 1 to set Auto Resend if Sending Failed .. 0 if not
Khashim said:
Hey,
Does anyone know where the registry key for button lock is?
Click to expand...
Click to collapse
hiya Khashim ..
AFAIK.. you cannot set Buttonlock in registry ..
use the SetButtonLock.exe if you want to turn ON the Button Lock during hard reset .. ..
Thanks toenailed
Thanks to ToeNailed, it's a really good job. By and large all of the setting for Imate PDA2k is working nicely.
Thanks toenailed for a really nice layout...!
Added a new page to wiki:
http://wiki.xda-developers.com/index.php?pagename=BA_PersonalCAB
And added all tweaks to this page:
http://wiki.xda-developers.com/index.php?pagename=BA_Hacks
Cheers,
HG
Ok I am trying...
but 1)Extract the keys from your registry using Resco Explorer or Pocket Controller software
2) Open each .reg file using Notepad or UltraEdit, and save all the keys in one .reg file by copy-paste
I have made a full backup file on my storage card of my registry with PMH, now I think to do the follow:
1) backup all programs and data with Sprite software on sd card
2) upgrade to new rom
3) reinstall PMH and restore registry
4) reinstall Sprite and restore programs
5) ... it will be ok ? I hope so because I really don't understand how to follow step 2 by HappyGoat
Thanks for pacience..
In resco you need to got to options -> add in
and tick the Active add-ins -> "My registry"
Then in the root window open -> My Registry
Long hold on what ever you want
Pop up for inport / export comes up.
Then find the file on your device
copy to pc.....
thanks all.... great tweaks and info
MDAIIIUser said:
In resco you need to got to options -> add in
and tick the Active add-ins -> "My registry"
Then in the root window open -> My Registry
Long hold on what ever you want
Pop up for inport / export comes up.
Then find the file on your device
copy to pc.....
Click to expand...
Click to collapse
hi..sorry maybe is an obvious reply.. but my resco (explorer 2003 v5.13) in add-ins has only "internal zip compression" and "my ftp locations" no "my registry" box...
PS solved with another sw (PMH regedit) thanks anyway..be back soon
did you do an upgade over the internet on your device,
I had the same problem with the ftp add-in.
Best is to go over handango and download the install, run it of your desktop when connected and I think it asks you which add-ins you want.
Its a cab file that is executed on your device.
As you dont have that option the cab has not beem executed.
Hi all,
do you know how to disable the annoying "sms wake up" event on the Opal?
I already tried to watch the reg at
HK_LOCAL_MACHINE\Drivers\BuiltIn\RIL
but "DisableSMSWakeUpEvent" is already set to 1
Setting the built-in "stand by" security password or using a device lock application is even more inconvenient...
Tks.
do it thru "Schaps AdvancedConfig v2.0.2.0"
hello!!! i have a problem with my p3700 when sync.i conect my device to the pc sync works perfect but when i press the power buton to turn the screen off sync conection stops. how can i prevent the sync from stopping?
kapazo said:
hello!!! i have a problem with my p3700 when sync.i conect my device to the pc sync works perfect but when i press the power buton to turn the screen off sync conection stops. how can i prevent the sync from stopping?
Click to expand...
Click to collapse
you should try to use Advanced Configuration Tool
v3.30 to overcome problems
i install the cab can you plese tell me which setting should i change;
kapazo said:
i install the cab can you plese tell me which setting should i change;
Click to expand...
Click to collapse
Advanced Configuration Tools for your Windows Mobile device featuring Appearance tweaks, Performance tweaks, Phone tweaks, Connections tweaks, SoftKeys changing and many more!
Advanced Configuration Tool allows you to easily modify more than 200 settings for Windows Mobile system and applications:
User Interface
Animate windows
Window animations frames
Window animations delay
Animate menus
Vertical scrollbar width
Vertical scroll arrow height
Horizontal scrollbar height
Horizontal scroll arrow width
Horizontal icon spacing
Vertical icon spacing
Icon title font size
Menu bar font size
Popup menu font size
Use long delay for gestures
Today
Single line Date plug-in
Show clock/battery on title bar
Show Power icon
Show Wireless Manager icon
Performances
File system cache
File system cache size
File system filter cache
PNP unload delay
PNP wait I/O delay
Glyph cache
Power Management
SD Memory power management
MMC Memory power management
NAND Memory power management
SIM Memory power management
AsyncMAC power management
IrSIR power management
PPTP power management
L2TP power management
USB charging
Show moving charge bar
AC resuming from suspend timeout
Battery resuming from suspend timeout
Screen
Show Orientation settings
Landscape mode
Landscape fixed
Auto device lock
Auto device lock timeout
Dim backlight in unlock screen
Backlight lock level
Input
Keyboard layout
Slide wake up
Keyboard backlight timeout
Suggested words
Network
Device friendly name
Max TCP Connect Retransmissions
Max TCP Data Retransmissions
TCP window size
DHCP
Validate server certificate
WPA authentication
Wi-Fi scan interval
Wi-Fi delay after boot
Turn off Wi-Fi if no activity
Wi-Fi auto off timeout
Phone
Phone skin
Enable video calls
Answer using any key
Face down mute ring
Phone sleep during call
Fast sleep during call
End call delay
Call progress idle timeout
Call ID match
Shows all call history in dialer
Max entries in call history
Call history clean period
Show SIM contacts
Purge SIM contacts when no SIM
DTMF support
Show Battery icon
Show Band page
Show PIN2 page
Show NITZ page
Show TTY page
Show ALS page
Use EONS
CPHS override
3G prefix in operator name
3G prefix text
Bluetooth
Bluetooth device name
OBEX
Use Joint Stereo
Bitpool
Maximum supported bitpool
Minimum supported bitpool
Sample rate
Audio gateway service
Audio gateway power save
GPS
Assisted GPS
Log file
Old log file
Max. log file size
Data Connections
GPRS auto attach
GPRS disconnect
EDGE icon
HSDPA icon
Legacy GPRS notification
HSUPA support
Private interface for Internet Sharing
Internet Explorer
User Agent custom base
4-way navigation
ClearType
Delay image load
Block static ActiveX
Play background sounds
Show script errors
URL Prefix
URL suffix
Links to keep
Search page
Maximum connections per server
Proxy Auto Detection
Messaging
Threaded SMS
SMS sent notification
SMS delivery notification
Wake up on new SMS
SMS Unicode support
SMS recipients limit
Max deleted SMS
Sync Sent Items
SMS callback number
SMS priority
Show roam warning
Calendar
Show lunar calendar
Show events text in Week view
Holiday category
Today Item
Camera
Save location
Burst mode
Theme Photo mode
Sport mode
Video Share mode
GPS Photo mode
Max size in Burst mode
Max size in Sport mode
Encode photos in portrait mode
Capture Key Delay
Key Delay
Capture Key Delay Time
Locations
Program Files folder
My Documents folder
Application Data folder
Desktop folder
Programs folder
StartUp folder
Recent folder
Favorites folder
Fonts folder
Default storage location for image files
Default storage location for audio files
Default storage location for video files
Default storage location for downloads
Internet Explorer cache location
Internet Explorer cookies location
Internet Explorer history location
Task Manager
Refresh interval
CPU usage refresh interval
Voice Command
Respect key lock
Default TTS rate
Windows Live
Live Search URL
Splash screen
MS splash screen on startup
MS splash screen on shutdown
Carrier splash screen on startup
Carrier splash screen on shutdown
MS timeout on startup
MS timeout on shutdown
Carrier timeout on startup
Carrier timeout on shutdown
HTC Animation
Animation
Volume
GIF file
WAV file
Startup GIF file
Startup WAV file
Shutdown GIF file
Shutdown WAV file
GIF animation speed
Play shutdown animation
HTC TouchFLO
Scrolling
Cube
Sound
Pressure threshold
Finger Pressure
High scrolling speed
Low scrolling speed
HTC TouchFLO 3D
Show logo
HTC Home
Lock position
Always open E-mail folder
Weather location
Weather location code
HTC Audio Manager
Music player volume
HTC Music plug-in
Default music player
HTC Audio Booster
Bass Level
Treble Level
3D Sound Level
HTC Camera Album
OK button
Show Camera icon
HTC AT Debug Log
HTC Debug Log
Log mode
RAM size
File index
File size
G-sensor
G-sensor polling interval
Light sensor
Light sensor polling
Light sensor polling interval
Light sensor threshold
Light sensor threshold to turn screen off
Miscellaneous
Security warning
Delete CAB file after install
Automatic daylight savings switch-over
Show daylight saving time notifications
Main features:
- Extensible tweak list.
- Multi-devices support.
- Multi-languages support.
- Customize key mapping.
- Customize file associations.
- Custumize ClearType settings.
- Customize connection settings.
- Customize HTC Comm Manager.
- Customize HTC TouchFLO 3D.
- Import/export settings using provisioning XML.
sorry my friend but you dont help me.you just post the available settings of the programm.i want the specific settings to solve my problem.
Hi,
might seem a silly question but it's very annoying while driving that I receive Samsung calendar notifications. While they appear full screen, Waze and music sounds are silenced.
I have to manually dismiss them before all sounds are 'restored'.
I just want to drive without interruptions of the calendar app, anyone know how this can be done? I'm also using Android Auto but don't see any setting that can accomplish this.
thank you
I'm using Tasker and AutoNotifcation for this. I block some notifications and enable the AOD while connected to my cars Bluetooth.
- install both apps
- in Tasker add a task and search for "AutoNotification Block".
- Tap the pen of Configuration and select the apps you want to block the notification for. You can also add the package name manually
- Under "Toggle" set it to "Block"
- go back and set the timeout to none (slide the slider to the most right)
- go back to the task
- go back to the task list
- add a new task, do the same as above but instead of "Block" set the Toggle to "Unblock".
Now you have the needed tasks and you can set the profiles for them.
- In Tasker go to the profile tap and add a new profile, name it whatever you want.
- Tap on "Status" and filter for "Bluetooth connected" (Note: Bluetooth must be enabled while creating the profiles!).
- Name is optional, tap on the magnifying glass for "Address" and select your cars Bluetooth address.
- go back and Tasker will popup a window where you need to assign a task. Assign the "block" task.
- now do the same again but Mark the "Reverse" check mark in the Bluetooth address menu and after this select the "unblock" task.
So, Tasker will tell AutoNotification to block the specific notifications while connected to the Bluetooth device and unblock it if disconnected.
I hope it works for you. I don't know the English menu entries for Tasker since my app is in German, sorry if there's something different.
thanks, great tip : I already bought Tasker a while ago, I'll set it up like that