I recently updated my X1's firmware with the Sony Ericson Update Service. Since then I've been reinstalling everything. Only problem is, that for some reason I can no longer install Microsoft's .NET compact framework, which is required for some programs to run. Is anybody else having this problem, or know what to do about it?
Here:
.NETCF v37.cab
http://www.4shared.com/file/130819293/aa65697a/NETCFv37.html
anhphe076 said:
Here:
NETCFv37.cab
Click to expand...
Click to collapse
Uh? There's a .NET Compact Framework v3.7??
anhphe076 said:
Here:
NETCFv37.cab
Click to expand...
Click to collapse
The file is not there!
anhphe076 said:
Here:
NETCFv37.cab
Click to expand...
Click to collapse
Quang cao VNPT ra the gioi ha ban? Bua nao minh ve Can Tho cafe nhe?
I had the exactly the same problem after installing the RA3 rom update.
It always said that the .net framework cf installation unsuccessful when I tried to install using the .exe file downloaded from microsoft.
Alternatively, you can install the CAB file from your computer.
If you use windows, look in the folder:
program files>microsoft.net>SDK>compactframework>v3.5>windowsCE for the CAB file. I used this one, NETCFv35.wm.armv4i.cab, and it works. Now I can use a software that needs .net 3.5.
ps: if I'm not mistaken the .net CF 3.7 is a leaked version. Therefore, I prefer installing 3.5 to 3.7.
liemivan86 said:
I had the exactly the same problem after installing the RA3 rom update.
It always said that the .net framework cf installation unsuccessful when I tried to install using the .exe file downloaded from microsoft.
Alternatively, you can install the CAB file from your computer.
If you use windows, look in the folder:
program files>microsoft.net>SDK>compactframework>v3.5>windowsCE for the CAB file. I used this one, NETCFv35.wm.armv4i.cab, and it works. Now I can use a software that needs .net 3.5.
ps: if I'm not mistaken the .net CF 3.7 is a leaked version. Therefore, I prefer installing 3.5 to 3.7.
Click to expand...
Click to collapse
Thank you, that seems to be working.
.Net CF 4.0 is actually available with the MS Visual Studio 10.0 beta, but beware: the damned program erased all my contacts and calendar when I autosynced (and I had no backup because I hadn't autosynced in months AAARRRG!)
I have some problem to use v3.5, hence now try to get v3.7.
Thanks...
Related
I am trying to install .NET Framework under the PDAViet3 release but it says a newer version of NETCF is already installed.
I cannot find it under the add/remove area. I am having trouble installing Cavemen (Game) and it says that NETCF isn't installed.
Anyone else having similar troubles?
cf2 is embeded in the rom. dont waste your time.
damn.. How can I install Cavemen then? It asks for CF core to be installed.. there must be somethign wrong if it cannot recognize it right?
frayes said:
damn.. How can I install Cavemen then? It asks for CF core to be installed.. there must be somethign wrong if it cannot recognize it right?
Click to expand...
Click to collapse
Suppose the problem is in Caveman. It looks for the CF2 while PDAViet supposingly has CF2 SP1 which is newer, so the error is thrown. I've had the same problem with some Wi-Fi third party app (don't remember which one exactly).
I want to upgrade to 3.5 is there a way to do that not using activesync/mobile device center because it does not work on my comp
.Net Compact 3.5
PM me and I'll send the CAB File to you....
i like googled the .net compact thing dl'd it from M$'s site then i installed it on desktop went to program files/.net compact*something like that*/dev/ *cab files are in there its the 2 mb 1*
If you'd like, i can give you a direct download from my FTP and you can download it straight off your phone (using the internet). Message me if you want it.
look here:
http://forum.xda-developers.com/showthread.php?t=432470
(http://rapidshare.com/files/150399830/NETCFv35.rar)
thank u for the help worked perfectly
.net compact framework 3.5 cad download
kareem9nba said:
If you'd like, i can give you a direct download from my FTP and you can download it straight off your phone (using the internet). Message me if you want it.
Click to expand...
Click to collapse
I was reading in this form on how to install .net compact framework 3.5 directly to my phone and i came across your message. I was wondering if u could give me the direct download. if you can help it would pe greatly appreciated. thank you
For WM 5 and above, it's NETCFv35.wm.armv4i.cab. Google it.
mrfantastic said:
I want to upgrade to 3.5 is there a way to do that not using activesync/mobile device center because it does not work on my comp
Click to expand...
Click to collapse
Sorry........... but what if you copy the *.cab file on a microSD card and then you put it inside the PDA and run it......... it seems to be the easiest way to do it, or not??
how exactly do you upgrade the .NET to 3.5. i downloaded it from the microsoft website and it said it wasnt a valid ppc file.
i used the search function (typed .NET and also tried .NET upgrade) i even tried google. anyway basically all i want this for is so i can use the diamond beer app aswell as any other app i might download or create that might need it.
thank you.
Look here:
http://forum.xda-developers.com/showthread.php?t=468535
install the correct version... correct file is named
NETCFSetupv35.msi (recommended google search)
Greetz
Boris
P.S. you have to install it to ppc from starting it on PC while being connectet to ppc via active sync!!
thanks so i found this site.
http://microsoft-net-compact-framework.en.softonic.com/pocketpc
is there a way to do this with out the active syn. i havent set it up yet and find it easier to just put it on my sd card and install like every other program.
if not thanks for ur help.
I've been trying to install the .NET framework for my Tilt, and it keeps spitting out "installation unsuccessful". It installs fine on my computer, then it goes to install it to my phone via ActiveSync (Windows Mobile Device Center actually because I use Vista). The installation screen on my Tilt pops up saying it's installing, but the bar doesn't move at all, and after a few seconds it just says it's unsuccessful without giving a reason!
I'm using the stock ATT Tilt rom, 6.1 version. I haven't done anything special to it, so I have no idea why it wouldn't work...
Can anyone spare some sage wisdom as to why this won't install? I'm trying to use wmVista and it needs 3.5 to work .
Note: I downloaded the .NET 3.5 right from Microsoft: http://www.microsoft.com/downloads/...49-3c6b-42f1-9fd9-0041345b3385&displaylang=en
Have you tried copying the NET CF3.5.cab directly to your Kaiser & then installing. The cab can be found in the installation folder on your PC or on this site if you do a search.
I've always installed from the cab file never from the PC installation so might be worth you trying it !
You might want to get the mobile version of .net 3.5...
http://frifor.com/download/IBI/NETCFv35.wm.armv4i.CAB
Download that to your memory card, then launch it with file explorer on your phone, and it should start to install all on its own. Install it to your device, not the media card, for quicker running .net 3.5, or if you want to save space install it to the media card, but it will run slower...
And FYI, the search function works very well, as well, if you had looked about 5 posts bellow this new one you created you would have seen a thread already dealing with this exact issue.
pjcforpres said:
You might want to get the mobile version of .net 3.5...
http://frifor.com/download/IBI/NETCFv35.wm.armv4i.CAB
Download that to your memory card, then launch it with file explorer on your phone, and it should start to install all on its own. Install it to your device, not the media card, for quicker running .net 3.5, or if you want to save space install it to the media card, but it will run slower...
And FYI, the search function works very well, as well, if you had looked about 5 posts bellow this new one you created you would have seen a thread already dealing with this exact issue.
Click to expand...
Click to collapse
Ah, I saw that thread before posting but I assumed by his first post that his problem was different than mine. I just check it out again and saw the direct downloads for the cab file, so I'm gonna try that out. Thank you for your help!
(I'm a new poster, but I've been lurking around these boards for a while now looking for stuff for my Tilt)
Hopefully this works...
i installed .NET CF 3.5 on my device then after installing my camera is just plain black and doesnt show any picture.
problem solved!
- i installed Resco Registry Explorer and .NET compact framework 3.5 on my Kaiser
- opened resco registry and searched for the .NET CF
- disabled .NET CF 2.0 by changing value from 1 to 0
- then enable .NET CF 3.5 by changing value from 0 to 1
I had the same problem, used your link, it worked perfectly. THANKS!!!!
Well. i need new version of .net compact framework.
so i tryed to install NETCFv35.wm.armv4i.CAB
But that gives me an error, and cannot install..
tryed a lot of different thingies, but cant get out..
who can help me with this??
Got tytn2 (original MDA vario 3) with newest original HTC rom availible
what error are you getting?
program i wanna run says it needs newer version of .net CF
installation .cab says cannot install shut down programs free up space error info : 2
(i have enough space free and shut down all programs... )
.net compact framework
That means .net is already in the rom
i also had the .cf configurator installed.. sayz nothing about the new 3.5 version installed
and programs i wanna run, say they need newer version..
How 2 fix?
.net compact framework
Here install this and you will see what im talking about after install look in your programs folder.
it says.
Versions installed: 2.0.7045.0 (ROM)
PPC 5.2.19212
How do i update this 2 .net CF 3.5??
Fixxed
install http://www.dinarsoft.com/memmaid/download.html
goto running processes, and terminate all the processes wich arent system..
NETCf 3.5
i also cannot install the NETCF 3.5..my file is NETCFSetup35.msi (downloaded from microsoft site, 33.3MB)
it said that Installation of Microsoft .NETCF 3.5 was unseccessfull..
i dont know whats wrong with it..
my net compact version:
2.0.7045.0 (ROM)
pocket pc
5.2.19212
(just the same as above)
so how to upgrade become 3.5..or which files should i download?
thanx for the advice
do as explained.
Download NETCFv35.wm.armv4i.CAB
install http://www.dinarsoft.com/memmaid/download.html
goto running processes, and terminate all the processes wich arent system..
--> install NETCFv35.wm.armv4i.CAB
reboot, run NETCFCFG.cab and set the 3.5 version as the one wich needs to be used.
I've already installed memMaid..
but the problem is..i dont have the NETCFv35.wm.armv4i.CAB file
i just have the one downloaded from microsoft (.msi, size 33,3 MB) is it the right file?..because when i tried to install,it said unsuccessful..no other warning to kill other process, etc..
do u have link to the file -> NETCFv35.wm.armv4i.CAB
thank u so much if u provide the link
problem solved