Error message while updating Generic UK R3AA010 from SEUS - XPERIA X1 ROM Development

Hi i'm newbie here.. I just want to update my xperia to newest firmware.. I tried to update from SEUS and the installation never completed. It always mention about not enough battery.. I already try to recharge my phone 3 times and installation always fail at 28%.. Does anyone get the same problem? Plz help me.. Thank you

Anyone have any suggestion??

demitpro said:
Anyone have any suggestion??
Click to expand...
Click to collapse
Hard resest ur phone and try again. Or try the way hard-SPL http://forum.xda-developers.com/showthread.php?t=431218 , and use SD method http://forum.xda-developers.com/showthread.php?t=445662 .

Just to add to waht kanchigo said: if you want to update to an original rom, you do not need to hard-spl you device.
I would suggest you download the newer stock rom from here and try the flash by sd-card method from here.
Hope it helps.

Related

stolen rom???

i have tried to update my htc with a new . after several times it start to upadate while it stopped at 2% and told me connection error. i tried to start on my htc and now it says "you have illegally gained this rom, this rom is only for ace-hellas"
what to do now???? please any help??
haha... interesting..
details please... what ROM are you trying to flash? under vista or windows.. is your device super-cid, or do you have hard-spl.. if yes, which one?
that must be the greek rom he had been using - search ace-hellas you'll know
ww2250 said:
that must be the greek rom he had been using - search ace-hellas you'll know
Click to expand...
Click to collapse
yes man. i tried to flash with mary 3.3.5sl and hardspl obliron...what did i do wrong? how can i fix it?
when i try to install starts but at 2% stops with error connection
have you tried:
1) flashing from SD card method?
2) Running SSPL manually on your device and then run the RUU
racerx_ said:
have you tried:
1) flashing from SD card method?
2) Running SSPL manually on your device and then run the RUU
Click to expand...
Click to collapse
flashing migh work but i dont have an sd card.
and yes i have tried to run sspl in device and it didnt worked.
problem solved. Guys i had to put another sim from different network.after that all went well. thanks all

is there a way to install wm6 from the device

everytime i try to install winm6 conxtn fails. may anyone help me plz. im stucked. i hate the dumm device
it says unsuported device or device not know eventhough i have the exact device. palm treo 750v. so what can i do?
Use the SD-card method to flash the ROM.
Here you go:
http://wiki.xda-developers.com/index.php?pagename=HTC_Cheetah_Upgrade
good luck
calico
thx man i did it. all i hv to do now is to unlock it. but the device says that i have tried 23 time & have to wait. so what can i o mate & thx 4 ur time

X1 ROM Upgrade Failure

Hi All,
I've just attempted to upgrade my X1's ROM via the Upgrade Service tool downloaded from the Sony Ericsson Website. Unfortunately, it froze at 69%. Neither trying to restart the device nor re-installing the ROM seemed to work. Which I got to the multi-colored screen it jus spelled "Upgrade ROM code error". I attemped using MTTY to reboot the device, but it seemed to be stuck at the Sony Ericsson Logo screen and not moving there after.
Was wondering if any of you have experience this before and would be exceedingly delighted to hear any advices on how I could fix this. thanks
Try flashing the ROM via micro-sd card as described here http://forum.xda-developers.com/showthread.php?t=445662
Download the needed ROM Image from here http://forum.xda-developers.com/showthread.php?t=475482
I don't think 'chongchian' has the X1 hardspl, otherwise it wouldn't work on SE upgrade service...
Better wait if someone else has any better ideas
DeeChan said:
I don't think 'chongchian' has the X1 hardspl, otherwise it wouldn't work on SE upgrade service...
Better wait if someone else has any better ideas
Click to expand...
Click to collapse
I think there is no need for hardspl if you are updating via the SE update service. Suggestion of skycamefalling is the best possible solution, using the micro-sd card.
This is incorrect information...I have mine hardspl'd and seus updates it fine...I would try re-running the seus update program..as long as its in bootloader it should work and attempt to reflash the device.
WC
DeeChan said:
I don't think 'chongchian' has the X1 hardspl, otherwise it wouldn't work on SE upgrade service...
Better wait if someone else has any better ideas
Click to expand...
Click to collapse
SEUS wouldn't let me update it after I HARD SPL flashed it.
Then something else is wrong...lol
Please help me, I am almost hopeless now
I had my X1 with Dutch ROM, so I had it Hard-SPL, and it confirmed 0.72.Oli.Nex
After that, I tried to flash a new English ROM on my PC, but it fall at 10% (ROM Code error).
I had to use MTTY to boot it, so that problem was solved, but the WinCE OS seemed to be destroyed during the process, so when I turned on the phone, it always stuck at the SonyE Bootscreen.
And then, I bought a microSD and formatted it with FAT32, download a ROM,extract it to .img file, change the name and filetype to Kovsimg.nbh, copy the ROM to microSD, flash it, but it said No Image Found
Please, please help me
Please tell me what I have to do now.
My X1 doesn't have any guarranty

Rom Problem With my X1

Hi`Guys
for the last few days im having an serious rom problem with my Sony Ericsson X1 sines i was looking for an good 6.5 rom that fits and works smooth with my X1 i found an cooked 6.5 rom belong to HD2 aka Leo2 and i reveiw it and i like it so i charged my phone to the full and unlock my phone using "HARDSPL Tool" after that i upgraded my phone with the new rom ,i like it at the first but after some times i faced alot of hangs and bugs within the rom besides the rom overload the processor that would make the phone runs slow so i had to place back my original rom so i used Sony Ericsson Update service "SEUS" to replace my current rom and when i runed the update it asked me to place back the stock SPL and i did and runed the update again but it said that i have he latest software update so i tryed to go all the way around and use the traditional way to downgrade my phone but here is the problem when ever i start the downgrade prosses it gives me update error number {[260] connection} the update stop and start the recovery prosses ,then i tryed to reunlock the phone but it gave me the same error ,so i tryed to get smart and i stop using the computer for the downgrading and moved to flashing methods farmatted my micro-sd to FAT32 placed the required nbh file named with Kovsimg but when i bootload my phone it stops at the loading part without going throw the checking prosses then done the same with the the SPL but the same it stick at the loading stage ,i start to get hopeless my last option was to use the MTTY Tool but it only formatted the rom without flashing the phone
so now im using 20% of my phone option to avoid bugs or hangs and my phone stick with bad 6.5 rom protacted with StockSPL that cant be changed
so guys any one faced the same problem ? plssss help i really feel like my phone its on handicap status
pls help me...
Try to install this:
http://forum.xda-developers.com/showthread.php?t=606799
drnjstj said:
Try to install this:
http://forum.xda-developers.com/showthread.php?t=606799
Click to expand...
Click to collapse
im not looking for a rom i want to release my phone from it hanging in rom updating it stops at 0% when i use the computer and at the loading screen when i use the micro-sd
but thanks for ur help anyways
error_man said:
im not looking for a rom i want to release my phone from it hanging in rom updating it stops at 0% when i use the computer and at the loading screen when i use the micro-sd
but thanks for ur help anyways
Click to expand...
Click to collapse
good info that
I read often that it might be solved with one of the following
1. Remove your SD card, run the HardSPL again, then reinsert the SD card with your kovsimg file and it should work
2. reinstall active sync via .msn
3. change the usp port and the data cable
4. disable firewall and antivir
...
But item 1 is reportedly the main reason for most of the error 260 connection failures.
good luck
DrakenKorin said:
good info that
I read often that it might be solved with one of the following
1. Remove your SD card, run the HardSPL again, then reinsert the SD card with your kovsimg file and it should work
2. reinstall active sync via .msn
3. change the usp port and the data cable
4. disable firewall and antivir
...
But item 1 is reportedly the main reason for most of the error 260 connection failures.
good luck
Click to expand...
Click to collapse
sorry it didnt help it showed me a new error with the number of [262] now and the upgrade i think the problem its within the phone it self
thanks for the help tho
error_man said:
sorry it didnt help it showed me a new error with the number of [262] now and the upgrade i think the problem its within the phone it self
thanks for the help tho
Click to expand...
Click to collapse
how did you try the update? w or w/o sd card?
if with card: did you check if the card is formatted as FAT32?
did you try it with a custom rom? maybe try a stock rom (pavelx1 thread) first
pls try to find some aid in hard-spl unlocker... thread
sry, but from here it's like looking for a needle in a haystack...
DrakenKorin said:
how did you try the update? w or w/o sd card?
if with card: did you check if the card is formatted as FAT32?
did you try it with a custom rom? maybe try a stock rom (pavelx1 thread) first
pls try to find some aid in hard-spl unlocker... thread
sry, but from here it's like looking for a needle in a haystack...
Click to expand...
Click to collapse
my dear friend i thank u so much for ur close support to me and my problem
i tryd the activesync first and after the update start on the computer and my phone the update stops at 0% on the computer and the phone as well then the update stops showing error #[262] update error then start the recovery prosses and i formatted my micro-sd to FAT32 and load it with the required file but when i bootload it start the update but stops at the 1st prosses the loading prosses and never move next to the checking and so on
i believe my problem it had something to do with the SPL the rom its locked with the StockSPL that not allowing the update to happen or to get unlocked with the HardSpl
error_man said:
my dear friend i thank u so much for ur close support to me and my problem
i tryd the activesync first and after the update start on the computer and my phone the update stops at 0% on the computer and the phone as well then the update stops showing error #[262] update error then start the recovery prosses and i formatted my micro-sd to FAT32 and load it with the required file but when i bootload it start the update but stops at the 1st prosses the loading prosses and never move next to the checking and so on
i believe my problem it had something to do with the SPL the rom its locked with the StockSPL that not allowing the update to happen or to get unlocked with the HardSpl
Click to expand...
Click to collapse
it's of no use if we can't solve it ... and I'm nearly out of ideas
pls read this, hopefully it helps
DrakenKorin said:
it's of no use if we can't solve it ... and I'm nearly out of ideas
pls read this, hopefully it helps
Click to expand...
Click to collapse
it toke me really long time to find the file in other site other than rapshared and it didnt worked i tryed also newer StockSPL also the same the phone its not updating im getting really helpless here
Have you ever tried to put your phone into the bootloader mode and try to hardSPL again?
Are you currently using win XP? Don't use Win 7 or Vista.
ted presley said:
Have you ever tried to put your phone into the bootloader mode and try to hardSPL again?
Are you currently using win XP? Don't use Win 7 or Vista.
Click to expand...
Click to collapse
yeas my friend i tryed it many many times it didnt work it give the same error [262] and i dont really trust windows 7 or vista with my phone upgrade i only use windows Xp for such things
thank u for ur support n help...
Try installing the newer SPL and then install hard-spl on a different computer without your sd card in the phone.
NeoXerO said:
Try installing the newer SPL and then install hard-spl on a different computer without your sd card in the phone.
Click to expand...
Click to collapse
do you have any idea where i can find an newer SPL ? hope if it is not on rapidshare server
http://forum.xda-developers.com/showthread.php?t=431218
its on XDA server..just click on the first link down on a list of downloads..it reads: X1_HardSPL_v1.zip
hope I cud help
error_man said:
do you have any idea where i can find an newer SPL ? hope if it is not on rapidshare server
Click to expand...
Click to collapse
sounds like he means newer stock spl
not sure if the latest stock roms already have 0.78spl, but you will get it it you flash an older stock rom (0.52) and update via SEUS
cheers
circleofomega said:
http://forum.xda-developers.com/showthread.php?t=431218
its on XDA server..just click on the first link down on a list of downloads..it reads: X1_HardSPL_v1.zip
hope I cud help
Click to expand...
Click to collapse
i didnt help too its the same one the i first used it that got my phone stuck..i really feeling helpless but i thanks u for ur hard work in helping me to get over my problem thanks
DrakenKorin said:
sounds like he means newer stock spl
not sure if the latest stock roms already have 0.78spl, but you will get it it you flash an older stock rom (0.52) and update via SEUS
cheers
Click to expand...
Click to collapse
can u pls tell me where i can find any new and old stocks..cuz SEUS is telling me that i have the latest software update
error_man said:
can u pls tell me where i can find any new and old stocks..cuz SEUS is telling me that i have the latest software update
Click to expand...
Click to collapse
sure
check pavelx1 rom thread in the sticky section
hes got R1-R3 country specific stock rom collection
1. Download stock rom for your country and flash
http://forum.xda-developers.com/showthread.php?t=475482
2. follow instruction: how to restore Stock SPL for warranty reasons from this post
http://forum.xda-developers.com/showpost.php?p=2710557&postcount=1
3. use SEUS to update your stock rom
YOU MUST FLASH STOCK ROM BEFORE RESTORING STOCK SPL
kjk said:
1. Download stock rom for your country and flash
http://forum.xda-developers.com/showthread.php?t=475482
2. follow instruction: how to restore Stock SPL for warranty reasons from this post
http://forum.xda-developers.com/showpost.php?p=2710557&postcount=1
3. use SEUS to update your stock rom
YOU MUST FLASH STOCK ROM BEFORE RESTORING STOCK SPL
Click to expand...
Click to collapse
i guess your way its the only thing that i didnt do yet but the problem is that all thouse stock roms are uploaded to rapidshare and i cant download it from there just hope is any body could tell me other site that i can download thouse new frimware or latest x1 stock rom

Xperia X1 Urgence Problem

hi friends
my X1 freeze on sony ericsson logo.i tried soft and hard reset several times but nothing.i upgraded rom with shipped rom in SDcard method(because x1 can not connect to a PC via activesync or wmdc) and it showed update success message finally but after turn it on again
it freeze on sony logo again and not to boot in WM.pls guide me what's the problem ?
BrianXP7 said:
Is the ROM image broken? Did you accidentally perform a task 42 at some point? What ROM did you install? Any other information would help.
Click to expand...
Click to collapse
Dear BrianXP7
rom was orginal R2(APP_SW_X1i_GENERIC_UK_CDF1215-1832_KOV_R2AA010)I used it random!but it was update success message.I dont
know what was orginal rom on my x1.it was only rom that x1 could loaded and update itself.what is task 42 ? but no i did not any task during update process. sorry i dont know about this and how does it do.thanks for ur help
BrianXP7 said:
Oops, my mistake. I meant task 29. It basically formats everything but the bootloader and SD card in your device. Are you sure that specific ROM is compatible with your device? It's for the UK model. Where did you get it and maybe a link to it? Try using HashCalc or HashTab to check the MD5SUM if you downloaded the image correctly.
Click to expand...
Click to collapse
X1 can not connect to PC so task29 is unusable . I update with R3 (APP-SW_X1_GENERIC_UK_1213-6450_R3AA010__KOVS) now and it ended with success message but again NOTHING it freeze on sony logo again!
I do not know what was orginal rom install on this x1.I confuse ! which rom is correct for this x1 and is problem ROM or another thing ?
sorry for bad english
I bouth x1 in Iran.I don't know from where x1 was ship to Iran but i hear there is a ROM for middle asia special one . i searched on net for it but nothing find.
i know this x1 was not shipped from UK .
thanks for reply BrianXP7
anybody help ??
BrianXP7 said:
I guess try flashing a different ROM?
Click to expand...
Click to collapse
Dear BrianXP7
i updated each three ship ROMs
APP_SW_X1i_GENERIC_UK_CDF1215-1832_KOV_R1AA017 and R2 and R3
(the only ROMs this x1 can loading and update with success) but nothing!
Is it hardware problem ?
BrianXP7 said:
What about a custom ROM?
Click to expand...
Click to collapse
where is custom rom download link ?
all of custom roms freeze on loading screen and could not install only ship roms updated with success messege
BrianXP7 said:
I ran out of ideas.
Click to expand...
Click to collapse
It could be SPL-related problem.
TS, what SPL have you got?
bootloader screen shown :
kovs110
SPL0.72.0000
Micro P1-787
Micro P2-707
i think spl is orginal that x1 worked before,i am not sure.
Oh, those little ass-handy bastards..
Batman1351 said:
bootloader screen shown :
kovs110
SPL0.72.0000
Micro P1-787
Micro P2-707
i think spl is orginal that x1 worked before,i am not sure.
Click to expand...
Click to collapse
"kovs100" tells me it is a really bad idea NOT to flash OliNex SPL (http://forum.xda-developers.com/showthread.php?t=431218) before ROM changing!
You should really go and read some tutorials!
just want up these thread, i had a same problem with my xperia x1 as same to the TS.
anyone from our expert in xperia x1 programing, can give a nice solution?

Categories

Resources