is there a way to install wm6 from the device - Palm Treo 750 ROM Development

everytime i try to install winm6 conxtn fails. may anyone help me plz. im stucked. i hate the dumm device
it says unsuported device or device not know eventhough i have the exact device. palm treo 750v. so what can i do?

Use the SD-card method to flash the ROM.
Here you go:
http://wiki.xda-developers.com/index.php?pagename=HTC_Cheetah_Upgrade
good luck
calico

thx man i did it. all i hv to do now is to unlock it. but the device says that i have tried 23 time & have to wait. so what can i o mate & thx 4 ur time

Related

upgrade version failed using shelltool ..pls help !!!

hey i'm an newbie , so please take it easy on me .
i have wizard , G4 version .
i tried to flash my WM5 to WM6 ( touchflo NBD ) using the software shelltool.
so i did everything i was supposed to , installing the cabs files and on .
but when i flash to the new version , it's disconnected while saying it's finished ( finished to write the rom ) . this was after 9 minutes - and i thought that's because i have good computer .
anyway , i hard rest my wizard - but it's get stucked on the splash screen of orange with all the version of SPL IPL .
now i get real stupid , cause i didn't know what to do , so i enter to the bootloader and tried to flash again with the shelltool while my wizard at bootloader status .
right now it's in the middle of writing the new version , but it's been more than 40 minutes , i'll guess i'll unplugged the cable cause it will stay like this for hours.
is there anyway to fix what i have done ?
please help me out !!!!
i don't know nothing about fixing the wizard with bootloader and stuff, so i need an guide .
hope for an answer thnx everyone
Same happened here. How i fixed. Downloaded wizard love rom. Get into bootloader. connect cable get usb connection. no active sync needed. Flash using RUUgetinfo file from love rom folder. not using shell tool. wait till finish. reinstall both cab files and reset. now use shell tool to flash to your choice rom. give it at least half hour to run. before disconnect even if it says program not responding. hope this helps....
yeah , i did the same and it's work .
too bad i didn't see your answer before 4 hours , i didn't sleep because of that.
by the way , wizard love is WM5 or WM6 ?
i tried to flash to black diamond and to NBD but with no luck , it's never end flash even after 2 hours !!!!!
is there any way to flash without shelltool ? maybe through RUU ?
please help us getting those flash on our wizards
You can't flash with RUU on a CIDLocked G4 That's why we want it so bad (cidunlocking )
heheh alright , so how come i can flash with RUU the wizard love edition ?
and is there any way to slove the problem with shelltool program ? cause everytime i'm flashing an rom , it's never end ...

big problem,need help!!!

i cant enter my device anymore.
i secured it with an password,but now i try to enter the device after giving the password,but it gives me an error,wrong password.
the password isnt from the phone,but its an programm wich i installed on it,to secure my phone
and i tryd to update it again to wm 6,but after the update,same problem comes again,need password to enter the phone
its an blueangel
thank you,
amir
HardReset - this is your only possibility. BTW: WM6 has problems with password. Dont use this security method.
jakubd said:
HardReset - this is your only possibility. BTW: WM6 has problems with password. Dont use this security method.
Click to expand...
Click to collapse
i already did hard reset, the same passowrd screens appears up again,im getting paranoid here,realy need help
Could you flash another rom on it?
I think this could solve the problem...
gnatto said:
Could you flash another rom on it?
I think this could solve the problem...
Click to expand...
Click to collapse
could you please give me another rom then,cause i really couldnt find another rom for my blueangel,before,it was an mda3 ,but i flashed it into htc blueangel windows mobile 6,so please,could you give me another blueangel rom,not the windows mobile 6,or could you explain me ,how i get back to my mda 3 rom,please.]
thank you verry much,
amir
p.s I ALREADY TRIED MDA 3 ROM FROM WEBSITE WWW.T-MOBILE.NL
but i couldnt put it in there,i tried to flash it,while it was on bootmode
Here is your ROM
I used below file to upgrade my MDA III.
Please note that I will remove the link after jan15, 2008
http://www.zerger.com/XDAFiles/HELMI_BA_WM6_R0_Public.RAR
Good Luck
zerger
You dont need another rom. Just hard reseset and chose format storage and clean reg hive from the menu. You must press the multimedia and the record buttons before the os/radio version appears for you to get the menu.

Bricked Wizard

sorry if this post seems to be a repeat , but i tried the search option and the results were not fruitful
a friend of mine , while trying to upgrade to a TNT ROM , didn't HardSPLed the device first , and successfully changed the ROM of the device , now it is stuck on the blue screen with SPL and IPL versions , and no response . for some reason , the device can go to bootloader mode , but it can not be reflashed , and it does not respond to a hard reset command.
please advise on what to do
regards
When it is in the bootloader mode, and connected via USB, is there a little USB icon in the bottom left? If so, simply flash your phones carrier ROM and all should be fine with it again. You can then apply HardSPL and flash to the TNT or any other ROM that you want to. Is your device a G3 or G4 by the way? What are the numbers after IPL and SPL?
well my friend says that the USB icon is visible there , and the device was indeed a G4. the thing is , what exactly should he do , in order to flash the ROM , since non of imate roms work for it. should he use any special software?
i'll greatly appreciate your help
Is he using Vista or XP?
he is using Windows XP , could it be the PC OS that caused interference?
Well, only if it is Vista does it really matter. He needs to get ahold of an original carrier ROM, such as the O2, or T-Mobile one and flash it to his phone, then HardSPL it, then upgrade to 6 or 6.1.
Download and flash Wizard_love Rom,it might do the trick,then HardSPL and upgrade to any wm6 or 6.1 rom.
What exact error it gives while flashing imate official rom ?
well the wizard has been an imate ,and it was flashed with an Original imate ROM already , but no success , any other suggestions?
thanks again
error [294]invalid vendor ID :
This Update Utility can not be used for your PDA phone.Please check your update utility.
here is the picture
http://i35.tinypic.com/29v03rl.jpg
and could you please give a link to the Love ROM?
thanks
Download wizard_love Rom from this link:-
http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
well he first got this error while upgrading
http://i33.tinypic.com/ivjz8o.jpg
then he managed to upgrade , but had the very first screen after ugprading on PPC screen , and nothing happens
it also gives a failure message while trying to manually Hard Reset after upgrade
please advise on what to do next
greatest appreciations
No SD Upgrade even tough... MTTY hahahaha
king_dani said:
well he first got this error while upgrading
http://i33.tinypic.com/ivjz8o.jpg
then he managed to upgrade , but had the very first screen after ugprading on PPC screen , and nothing happens
it also gives a failure message while trying to manually Hard Reset after upgrade
please advise on what to do next
greatest appreciations
Click to expand...
Click to collapse
It seems you need to follow the drugstore MiniSD upgrade but...
I guess you dont have another wizard to make a bacuk up... so wait a minute...
You don have hardspled yopur device...!!!
HAHAHAHA forget it!mmmm
Maybe mtty... folow mi signature maybe works
See you There Men!!!!

Error message while updating Generic UK R3AA010 from SEUS

Hi i'm newbie here.. I just want to update my xperia to newest firmware.. I tried to update from SEUS and the installation never completed. It always mention about not enough battery.. I already try to recharge my phone 3 times and installation always fail at 28%.. Does anyone get the same problem? Plz help me.. Thank you
Anyone have any suggestion??
demitpro said:
Anyone have any suggestion??
Click to expand...
Click to collapse
Hard resest ur phone and try again. Or try the way hard-SPL http://forum.xda-developers.com/showthread.php?t=431218 , and use SD method http://forum.xda-developers.com/showthread.php?t=445662 .
Just to add to waht kanchigo said: if you want to update to an original rom, you do not need to hard-spl you device.
I would suggest you download the newer stock rom from here and try the flash by sd-card method from here.
Hope it helps.

[Q] I Need Help....

Ho. Hi all, i have problem with my xda 2 & I have it 3. All have the same problem, it can't use to make a call or receive a call otherwise the GPRS run well. I already try all new roms, but still the same, cant use it to make call. I cant remember the last time it can use to call. Somebody help please.... n sorry for my bad english thanx
mipsiz said:
Ho. Hi all, i have problem with my xda 2 & I have it 3. All have the same problem, it can't use to make a call or receive a call otherwise the GPRS run well. I already try all new roms, but still the same, cant use it to make call. I cant remember the last time it can use to call. Somebody help please.... n sorry for my bad english thanx
Click to expand...
Click to collapse
hi
I suggest you could try unlockig it again (I assume it is sim-unlocked?). I used to run axdadev_all_unlock-v1.6_138 only once, but I was having some problems, so I always use same application twice and it works great
1) download axdadev_all_unlock-v1.6_138 and copy it onto device
2) find it and run it (on device) via file explorer
3) when u see "success" screen, soft reset device
4) run axdadev_all_unlock-v1.6_138 again
5) when u see "success" screen, soft reset device
let me know if it worked
BTW:
1) have you tried to Hard reset your xda II ?
2) have you tried different radio's ?
3) are your devices european or maybe from USA?
regards
Matt
Ho. Hi Matt, thanx a lot for your answer on my problem. I already try every step you told me, but still looks the problem still happen. I Already hard reset my devices for many times, but not help. Should I try another radio? hehe, i don't know how to try another radio coz i newbie. Hope you will help me to solve my problem. Btw, I live in ASIA, Indonesia if u ever heard, so I guest my device made for ASIA....
Regard,
Indra
hi..try to upgrade ur radio stack..
according to this forum,radio 1.17 is the best choice..
but i'm using radio 1.18,wm6.1 by aeroflyluby and still not find any trouble..phone OK GPRS OK....but the latest one is 1.19
u can use himaupgradeut or himaupgradeut_noid (for european or other but i think ur device is asia version)then put ur rom file (nk.nbf),ur radio file (radio.nbf) and click the himaupgradeut..
but u must sure there are enough battery (50% above) in ur device before upgrading..
just wait and relax(coffee,snack,etc)
ps:if u want a 30mb storage for ur device when using wm5 above,before upgrading u can use ExtROM unlocker and HIMA DOC Tools for repartition ur storage.
hope this will help
xda_anto said:
hi..try to upgrade ur radio stack..
according to this forum,radio 1.17 is the best choice..
but i'm using radio 1.18,wm6.1 by aeroflyluby and still not find any trouble..phone OK GPRS OK....but the latest one is 1.19
u can use himaupgradeut or himaupgradeut_noid (for european or other but i think ur device is asia version)then put ur rom file (nk.nbf),ur radio file (radio.nbf) and click the himaupgradeut..
but u must sure there are enough battery (50% above) in ur device before upgrading..
just wait and relax(coffee,snack,etc)
ps:if u want a 30mb storage for ur device when using wm5 above,before upgrading u can use ExtROM unlocker and HIMA DOC Tools for repartition ur storage.
hope this will help
Click to expand...
Click to collapse
1.17 radio is most stable
Himaupgradeut_noID is safier, it works like normal update but does not check device orgin, so you can upgrade even chineese PPC For Chiineeesee hands himalaya too.

Categories

Resources