Related
So, I broke my phone and a buddy had an MDA laying around. However, when you turn it on a ton of errors come up:
Init_Tray.exe
CapNotify.exe
WiFiInit.exe
CheckAutoRun.exe
all are missing or cannot be found.
I tried the hard reset and no go. I was able to get it into bootloader mode and attempted to try the T-mobile ROM upgrade in hopes that I could fix this phone and I got error 274. Does this mean the phone cannot be fixed?? WM runs all goofy and I'm hoping that someone can provide some insight on this phone. TIA.
In the words of the immortal Johnny Five from the movie "Short Circuit"-INPUT! NNNEEEDDD INPUT!!! But seriosuly man, download the Wizard Service Tool, and tell us what information it displays, such as your IPL/SPL, if its a G4 or G3 and whatnot...than we can help yah!
Got the tool and at first it would not let me run the ENAB RAPI + UNASSIGNED APPS, but finally it let me. (just so you know, from time to time when connected to ActiveSync it will disconnect on it's own). Got ENAB + APPS to work, but when I hit DEVICE INFO I get the following:
Warning!
A device was detected but one (or both) of RAPI
Communications and Applications Policy isn't
enabled.
Use first button for that purpose and try again
--------
So, I ran it (ENAB+APPS) again and it was successful again, but when I hit the DEVICE INFO I get the same error.
Is there any possible way to flash the ROM via the SD card??? I think one the biggest problems is the Active Sync connectivity.
bane126 said:
Is there any possible way to flash the ROM via the SD card??? I think one the biggest problems is the Active Sync connectivity.
Click to expand...
Click to collapse
Nopes ! sdcard rom flash is only possible,if you already had backed up the present rom on a sdcard and secondly, if the phone is already CID unlocked.
You can manually copy and paste the two cabfiles 'EnableRapi' and 'Cert_SPCS',in your phone and execute,they can be found in the installation folder of the Wizard Service Tool...> files folder in the program files in C:\ drive,if you are able to establish connection with Activesync.
To verify the connectivity,get your phone into Bootloaders mode (multicolor screen) and hook up the phone with pc via usb,check if small usb appear at the bottom of the Bootloaders,if its there,than its establishing connection,otherwise,your usb cable or mini usb port of the phone is faulty.
Many connections problems are also related to weak battery,get the battery fully charged.
If it establishes connection in Bootloaders,than download the official carrier's rom and flash it in Bootloaders,it'll work out.
Cheers!
I was able to put these files 'EnableRapi' and 'Cert_SPCS' on there, but when I go to execute it does it super fast and I don't get a verification. Is that normal?
I will charge the battery and try that too. Thanks.
Yes, that is normal..all they do is tweak 2 settings, they dont actually write anything, and no, they dont have any kind of confirmation screen to go along with them.
Finally!!!!
So, I was finally able to bring this badboy back to a usable state. After many failed attempts at flashing the ROM I tried something that I hadn't done before. I killed the wcescomm process and disabled ActiveSync via USB before I connecting the MDA in bootloader mode. Once I did this the ROM update began working and I almost jumped out of my seat at work. Was able to get it going without and crazy errors and now have a usable MDA. Thanks for everyones advice.
Kill the wcescomm process!!!! and disable USB AS!!!!
When you start to flash and run RUU,it automatically disables and stops Activesync,but yes,sometimes it helps out by manually disabling and or altogether stop activesync running by stopping wcescomm process.
Anyway,glade you got it working.
Hi,
as the title suggests I have problem flashing HSPL. I've already done everything the original thread says when encountering USB problems e.g. other USB port or cable. I have also installed the "enablerapinew.cab" and used both manual and automatic mode of "Topaz-HardSPL_V5_09R6.exe". I have tried using "SSPL-Manual-TopazV5_09.exe" as well.
I already created a ticket adressing that problem a few days ago but haven't received any answer yet. (Ticket #458139)
The result ALWAYS is that as soon the phone shows the SSPL screen - no matter how it was brought to that state - the connection to the PC is lost. Windows Mobile Center then shows it as not connected. Before that it was always connected and synced perfectly fine. As a result I get "Error 260: CONNECTION".
I have Win 7 Pro 64x and no access to an XP PC.
Would be great if anyone could help since I have no idea what else I can try to make it work.
you need drvupdate-amd64 to be able to reconnect the device to the PC
Hakim Rahman said:
you need drvupdate-amd64 to be able to reconnect the device to the PC
Click to expand...
Click to collapse
When I try to install the file, it says I already have a newer version installed. Do I need to uninstall the version I have to be able to install this one or does that mean I have a different problem?
EDIT:
I downloaded the most recent version from Windows' Homepage and it worked!! Problem solved, thank you very much
Ok guys I'm a noob around here. I've had my P990 for about 7 months and I'm ready to throw it against the wall:crying: I've been searching for info on this type of fault and I read that it happens pretty often. I really didn't have the need to plug my phone to my computer, so I never did, until about two days ago I decided I was bored with my stock phone and decided to install the latest version of android, so I downloaded the LG IV suite. Installed it, I'm following the directions, connect my phone and bam, NOTHING I kept getting an error on the LG suite, can't find phone, check connection and try again. At this time I also notices that my phone was charging through the USB cable. So my basic troubleshooting techniques kicked in, and performed the basic steps:
-Made sure Mass storage only box is checked
-Switched USB cable
-Re-installed the driver
-Downloaded the latest driver from LG website
-Downloaded drivers recommended by XDA
-Tried two other computers with two different OS
So none of this worked:crying:
After monkeying around for a couple of hours with my phone, I read somewhere on this forum to take out the battery, connect to USB cable to your computer, hold down the power and volume down buttons at the same time, this would put my phone in some mode, I don't know what that mode is, but decided to do it. My phone powers up, then I see the green android little man with a white box and an arrow coming out of the box. Ok, finish doing it's thing and then it reboots. I go into my phone and find that everything has been erased and the phone was back to it's original state when I received it over the mail.
Since my phone is back to stock, I decided to go the root road. Downloaded SuperOneClick, installed it connect my phone via USB and I'm back to step one. I get nothing!!! So then I decide to go the root flash road. So I downloaded the z4root adk file and put in the flash, pop the flash in my phone and nothing. Can't see my flash card on my phone (never used an SD card on my phone and decided to buy one for this instance). Kept reading on-line and found that I need a file manager application, so I installed Linda Manager on phone, opened the z4root adk file and installed on my phone. So now I'm getting very excited and I'm giggling like a school girl because I'm starting to see light at the end of the tunnel. So I run the z4root application and go with permanent selection, the application start the root, then BAMMMMMMM. The application just stops and my phone takes me to my home page. I decide to restart the z4root application and I can't get the app to run. I re-booted my phone, restarted the app, and keep getting stuck. The app stops and I can't never successfully get a root. I'm out of ideas, I've going at it with my phone for two day and reading on the net.
The two thing I want to accomplish is to be able to use my phone via the USB cable and to root my phone. Can you guys point me in the right direction. At this point I'm willing to try anything on my phone since everything got erased.
by the way here's is what stock I'm running on my phone:
Android version: 2.2.2
Baseband version: 1035.21_20110725
Kernel version: 2.6.32.9
Built number: FRG83G
LGE version: LGP990-V10d
My computer is running Windows Vista, I also tried a Window 7 and a Windows XP computer and still nothing for the USB.
I would appreciate any help guys, throw me a bone over here:laugh:
Same thing happened to my friend. No USB detection (the phone was charging through usb but nothing showed up on the pc). He tried everything then he called me (I have o2x too) , i tried everything you did too. His pc detected my o2x , but when he connected his (on the same cable) ... nothing .
Finally he remembered the phone had warranty and took it to tech suppport. First they reflashed it , but when he tried it home ... nothing . He took it to support again , they kept it for about 10 days and told him they had to change the motherboard.
Phone works now.
He was on stock froyo too , Vodafone Romania version.
Sent from my Optimus 2X using Tapatalk
On another threat I found more similar problems.
kohos said:
Sorry for the bump, but I got some update.
when dialing the above mentioned 1809#*990# in the Port menu, switching from default AP USB to AP/CP UART gave me life signs.
After switching to AP UART I linked the Unknown device driver to lgusbdiag.inf located in C:/ProgramFiles(x86)/LG United Mobile Driver.
Suddenly it started installing it and is now recognized as: LGE Platform Android USB Device.
Once disconnected I lose USB again, I'm able to recreate the first steps though even in default AP USB mode by now.
The only thing I need USB for is for flashing a custom recovery but the only thing I don't have is ADB somehow : / Clockwork telling me: device not found.
Any help on this one?
Click to expand...
Click to collapse
I tried this, but unfortunately it didn't work, I can't even see my device under Manage/Device Manager.
brymarti said:
i tried that but it only charge
theres a weird thing in my cp when i switch to cp uart my o2x says it charging even i dont connect it to my pc or charge it
Click to expand...
Click to collapse
I get the exact same symptom, as soon as I change from AP USB to AP/CP UART, my battery icon on my phone goes to charging, without the being plugged in
Well I'm pretty tired of monkeying around with this phone, but I really like phone and really don't want to change model. So I decided to order a brand new one:laugh:
I should be getting it within the next two week, hopefully that doesn't give me the same problem
I'll keep you guys updated.
Help??
A very good friend of us noobs toying with our O2x's are Paul O'Brien.
I could not get any other flashing tool to root my O2X other than his. Here is link to his guide:
modaco.com/topic/335474-25-mar-nvflash-stock-rom-release-v10b-dated-1300166062-15032011/#entry1645587
He also has the tool to completely restore your O2X back to factory standards, and in the O2X forum here you will find all the different stock roms, you need to get your phone back to these factory standards and restore your warranty.
After you flashed your phone and get ready to try all the marvellous ROMs, waiting on the other side, I can only recommend to purchase the PRO version of Clock Work Mod, it really brings out the fun in rooting your phone.
Seeing your description of your troubles, I think you have softwareproblems, more than hardware problems, so a complete flash and maybe restore, will likely solve many if not all of your problems.
Best regards
Mike
And dont forget to show your support to the developers, they do a marvellous job for us!!!
Thanks mike,
I followed the link you provided and did a lot of reading. So decided to try that method. No luck with that, my computer doesn't detect APX mode while holding down both volume keys. I tried it like 10 times every time holding the keys at different intervals. I even tried it on my wife's laptop running windows 7, didn't work either.
I did find a lot of good info on the link you posted.
Thanks, just waiting on my new O2x to come in the mail.
Possible solution
Some days ago, I also had a problem connecting my LG Optimus 2X to my PC (Windows 7).
I solved my problem using this instructions I found in the G2X forum, by conspirator_boff user (http://forum.xda-developers.com/showpost.php?p=15899923&postcount=10)
Similar issue. This worked for me on Win 7.
Uninstall the LG Drivers and reinstall the G2x 2.2 package from LG.COM /us/support/mc-support/mobile-phone-support.jsp (I can't post links)
Plug the phone in and go to Device Manager. There should be a USB Composite Device that is not properly installed. Right click it and select Update Driver Software.
Select 'Browse my computer', then 'Let me pick'. Choose have disk, and browse to where the LG Drivers are installed. Likely C:\Program Files\LG Electronics\LG United Mobile Driver\ and select lgbus9x.inf.
Then pick LGE Android Platform Composite USB Device from the list of drivers. Should be the top option. Hit next.
I let it sit for a minute while the drivers installed. Some things registered in device manager right away, the LGE USB Modem for one. But, the drives didn't. Unplugged the phone, plugged it back in, and the drives popped up under Portable Devices.
Click to expand...
Click to collapse
I think it's an issue from the newest LG Drivers because when I first tried to connect it a year ago I had no problems.
Hope it helps.
hurtads said:
Thanks mike,
I followed the link you provided and did a lot of reading. So decided to try that method. No luck with that, my computer doesn't detect APX mode while holding down both volume keys. I tried it like 10 times every time holding the keys at different intervals. I even tried it on my wife's laptop running windows 7, didn't work either.
I did find a lot of good info on the link you posted.
Thanks, just waiting on my new O2x to come in the mail.
Click to expand...
Click to collapse
Good luck and I hope your new phone will behave properly.
Remember Paul also has tools for bringing your phone back to factory standards, so you keep your warranty.:good:
Enough said, good luck and remember our O2X is probably one of the easiest phones to try out different ROMs at and I have never enjoyed this little gadget as much as after I flashed it!!:
BR
Mike
Fixed
Sorry guys for the late update.
I received my new P990 about two weeks ago. As soon I pluged the phone into my computer it started installing the drivers and I was able to use my phone via the USB cable. Another thing I noticed, on this new phone when I pluged the USB cable, I noticed it went in nice and firm, on my old phone the cable seemed to be a little loose. Anyway it was definately a hardware issue with my phone. I'm pretty happy with 2x.
Hello! I know, I know. There are a lot of different threads according to this problem but I read almost everything and still cannot fix my problem.
A few weeks ago when I tried to charge my phone the message: Your cable is not compatible with your device. Please use the orginal HTC-cable or your phone get damaged. appeared.
until that moment I thought it doesnt matter if I use a htc cable or a cable from another brand. I mean they changed all the ports to a micro-usb-port. Just to give you the opportunity to use every cable.
Well, after that I tried to connect my phone with my computer and the HTC Car app appeared and bluetooth got switched on. WHY?
I did a factory reset and flashed my rom again. Now I can connect my HTC One with my computer and on the screen of my computer appears the message:
"Device not recognized "Windows has stopped this device because it has reported problems. (Code 43)"
(and its unable to mount otg-usb in recovery)
I tried different cables. I tried to (un)install and update the HTC drivers. I tried different computer. I tried turning usb debugging off and on! I tried to clean the USB-pins! nothing works! :crying:
(Unfortunately I have no old backup with my new TWRP v2.6.)
I just have been abroad for 6 months and dont wanna loose all my photos and videos. Any ideas?
I think its a software issue on my phones. Maybe something with my partitions. But I dunno what I can wipe without deleting all my photos and videos.
THANKS
Why the repost? http://forum.xda-developers.com/showthread.php?t=2677823
Suggestions already provided.
cause I have still no solution. I know that I could upload 32GB. im pretty sure somebody could help me to solve the problem with error 43
Ok ladies and gents,
I've been on a mission to root my Note 5 N920I for months now.
My problem is no computer will read/recognise the device. The Mac's seem to not even recognise it's plugged in, with Windows, no matter which driver I install it keeps telling me the "device descriptor failed blah blah blah". I managed to root my S4 very easily on Mac with Jodin3 so I know that it ain't no user error.
I've Googled and Googled ways to root without a computer or installing a custom recovery without root, but from what I understand I can't flash TWRP as recovery without a computer and therefore cannot root without a custom recovery.
I've Googled ways to fix the USB issue by making the xml file and putting it into the correct folder, but for that I need to be rooted. Right?
When she's plugged into a computer with USB debugging on or off nothing comes up in my notifications except for charging. I tried using the toolbox which I found on here (sorry can't remember the name) though it seemed like I was getting close, I couldn't get close enough before my temper got the better off me.
If my memory serves me correctly the OTG function worked when i first got the phone but didn't after the first update. My mate's Note 5 also has the same issue. I Googled it and seemed it was common issue on these phones.
I've tried to learn some Terminal/Command Prompt to see if I can fix it that way through Debian or whatever, only got as far as understanding it, kind of. Big ups to all you coders/programmers out there it really is an artform.
So PLZ PLZ can y'all help me, there has to be a way aside from setting this thing alight and getting a new phone.
My next mission, which I only embarked on a couple nights ago is unbricking my dad's Note 4 (N910G) that just hit the **** one day after spazzing out for a few days then would not turn on. I'm getting close though I haven't put much effort into that yet.
Any advice will be greatly appreciated, thanks in advance. ?
Anyone??
$pooLz said:
Anyone??
Click to expand...
Click to collapse
1)First of all have you enabled usb debugging and oem unlocking options enabled from developers options?
2)Install latest usb drivers for your model no on pc, use original usb cable to connect your phone
3) Try different usb hub-ports on your pc, it is recommended to use main-usb port to connect device properly which is mostly located backside of cpu cabinet
4)Does odin recognises ur device? If yes then you can flash twrp and cf autoroot both ( Sometimes Kies or smartswtich like programmes enforces device not be reognised, so uninstall them before trying to connect and flashing thorugh odin)
5)Try to update device drivers manually from Pc's administration
6) Try to connect your phone on another pc running windows and see if it recognises your device or not
I've tried all of that, i have a 09 Macbook Pro hand me down running Yosemite with Windows 8.1 Pro n just put Ubuntu on her today through Parallels. None of which recognise the phone being there.
I've plugged it into 2 HP PC's and both just keep telling "device descriptor failed". They're both kinda old too.
Unless someone has a specific driver they've made or found or could make me?? Clearly I'm a noob.
Closest I've found is https://github.com/452/USBHIDTerminal/wiki/How-to-enable-USB-host-API-support but still need root or system mounted as rw.
Any other ideas? Any ADB codes anyone could help me with ?