[HELP] "Code 43" device not recognized - One (M7) Q&A, Help & Troubleshooting

Hello! I know, I know. There are a lot of different threads according to this problem but I read almost everything and still cannot fix my problem.
A few weeks ago when I tried to charge my phone the message: Your cable is not compatible with your device. Please use the orginal HTC-cable or your phone get damaged. appeared.
until that moment I thought it doesnt matter if I use a htc cable or a cable from another brand. I mean they changed all the ports to a micro-usb-port. Just to give you the opportunity to use every cable.
Well, after that I tried to connect my phone with my computer and the HTC Car app appeared and bluetooth got switched on. WHY?
I did a factory reset and flashed my rom again. Now I can connect my HTC One with my computer and on the screen of my computer appears the message:
"Device not recognized "Windows has stopped this device because it has reported problems. (Code 43)"
(and its unable to mount otg-usb in recovery)
I tried different cables. I tried to (un)install and update the HTC drivers. I tried different computer. I tried turning usb debugging off and on! I tried to clean the USB-pins! nothing works! :crying:
(Unfortunately I have no old backup with my new TWRP v2.6.)
I just have been abroad for 6 months and dont wanna loose all my photos and videos. Any ideas?
I think its a software issue on my phones. Maybe something with my partitions. But I dunno what I can wipe without deleting all my photos and videos.
THANKS

Why the repost? http://forum.xda-developers.com/showthread.php?t=2677823
Suggestions already provided.

cause I have still no solution. I know that I could upload 32GB. im pretty sure somebody could help me to solve the problem with error 43

Related

Windows not recognizing my sprint hero :(

Hey guys, i rooted my phone a while ago and have recently been expeimenting with different ROMS and such, and today i flashed a damageless ROM to my phone and it was working fine, but when i connect it to my computer i get a message that says "one of the USB devices attached to this computer has malfunctioned, and windows cannot recognize it." it still charges and gives a sync notification, but there is no option to mount the sd card to the computer. ive tried soft reset, hard reset, i wiped my phone form the recovery screen, rebooted the phone, robooted the computer, and tried a nandroid restore, but nothing has worked. im still pretty new and very inexperienced with this stuff and i know if ill find help, itll be at xda, so any help is greatly appreciated. Thanks!
im still running cupcake, never saw a point in updadting when i could just flash a 2.1 ROM so much faster than an official update.
It might be totally unrelated, but that happened to me about the time my data/power connector broke/went bad and I had to get a replacement. Have you tried connecting on a different pc to see if the error is replicated?

[q] usb not recognized sgs i9000

HI TO ALL FRIENDS
I SUDDENLY ENCOUNTERED A PROBLEM: usb not recognized ..... .
what i did:
1-uninstalled kies and installed again
2- installed driver again
3-tried on other PC
4-re installed windows seven on laptop
5-changed cable
6-formatted my sgs 2 times
7-usb debugging and other types of connection does not work.
8- 2 days ago my sgs dropped down from 1 meter high.
9- it works great by itself but no usb connection available
10 during this week i tried about 10 pages of apps , and it has been sluggish, and finally this problem of usb made me to format it to factory reset.
NOT ALL DONE ABOVE WORKED
PLEASE HELP ME
Well, it is possible that the USB connector in your phone was damaged when it fell.
But first of all: As far as I know, you do need the original Samsung cable which came with the phone to connect to Kies. So, if you can still use the mass storage capability, but not use Kies, this could be your problem. Otherwise it's more likely to be the connector.
THERE IS VISIBLE NODAMAGE . I PERSONALLY THINK THAT PART OF OS THAT CONTROLS EXTERNAL CONECTION HAS IMPAIRED AND MUST BE REPAIRED . BUT HOW? IS THERE ANY WAY Of flashing android device without need to odin and pc?
I don't think that the software could have taken damage by the fall. And if there is any way to flash the phone without USB connection, you would need to take apart the phone and use special hardware - maybe you should just RMA it. Contact Samsung support and see what they have to say.
hi dear friend
i didnot mean RMA
and i think or i feel if there were any way to install a fresh ROM on sgs with 3 botton assistance, not with odin software, thats why pc can not recognizr my phone. so i think newand fresh rom can do better.
i mean copying a rom file on sd card and through recovery mode applying update zip
I AM REALLY COFUSED
http://forum.xda-developers.com/showthread.php?p=13203799
[FIX] Usb mounting Internal and External SD
Sent from my GT-I9000 using XDA App
@raminazad: If you really want to update your ROM first, you will have to wait. A "custom recovery" is needed for this (as a cable connection is not possible for you), and there does not exist one, yet for the i9003. Maybe in some weeks... look in this thread:
http://forum.xda-developers.com/showthread.php?t=1120301
raminazad said:
HI TO ALL FRIENDS
I SUDDENLY ENCOUNTERED A PROBLEM: usb not recognized ..... .
what i did:
1-uninstalled kies and installed again
2- installed driver again
3-tried on other PC
4-re installed windows seven on laptop
5-changed cable
6-formatted my sgs 2 times
7-usb debugging and other types of connection does not work.
8- 2 days ago my sgs dropped down from 1 meter high.
9- it works great by itself but no usb connection available
10 during this week i tried about 10 pages of apps , and it has been sluggish, and finally this problem of usb made me to format it to factory reset.
NOT ALL DONE ABOVE WORKED
PLEASE HELP ME
Click to expand...
Click to collapse
If you really triad all above and none working, I think you should take your phone to samsung repair service.

USB issue

Hi,
I currently encounter a problem with my Optimus 2X.
I can use my usb port to load the phone but when I plug it in a computer (I tried with several computers running XP / seven / ubuntu ... and several cables). But my phone doesn't seems to be recognized by the computers.
I'm running 2.6.32.45 cyanogenmod. I wanted to go back to the original rom but my backup seems corrupted
Does anywone knows how I can go back to the original rom ? (hopping it will fix my usb issue ....)
regards.
Uninstall the old drivers, and download v3.6 from lg's site it has fixed this issue. =P
Sent from my LG-P990
Even if the coputer act like there is nothing plugged ? On several computer I used the phone wasen't recognized as a plugged peripheral (even a usb key).
I had the same problem, v3.5 of lg united driver was cqusing it , when I updated it got fixed just uninstall reboot and install 3.6 worked for a few more peps
Sent from my LG-P990
Thank's a lot it works perfectly !
I now encounter a new problem, when I try to update my phone using the LG software, it stops at about 30% (looks like it's impossible to connect the phone with the software).
Edit -> I've found an old stock rom and installed it on my phone : everything works perfectly thanks a lot !!!
Guys
I'm running CM Nightlies and I can no longer connect my phone to any pc via USB.
Some have said I would have to flash phone back to an original rom in order to fix then flash CM back over it?
Is this really only way as worried will lose all my internal drive stuff.
You can try to change your drivers it works very well !
If you wan to save your stuff without using USB you can use FTP thrue à WIFI to send stuff on your PC.
I got the same problem since about 4 months. When connecting the phone to the computer, no usb icon appears on the notification bar, also there is nothing happening in the device manager on the computer. Charging always works.
This is still confirmed after using different computers, different usb cables, different usb ports, and 4 different versions of the drivers (up to the most recent 3.6 drivers) even it should still show something even with no drivers. This also occurs in "software update" mode.
Also I tried different ways of plugging in the cable on the phone side (slow, fast, with pressure up/down/side).
This is with CM7, CM9alpha, and just for test also with MIUI.
The odd thing is, in this time span, it randomly worked about 4 times in these 4 months. Last time was just after I updated to CM9 alpha it worked the first time I plugged it in (was surprised with that), but it stopped working too.
For me it seems it's something with the usb chip set in the phone.
The problem here is, returning the phone for RMA will cause problems with CM on the phone, as they probably will say it's because of a custom rom, and there is no (easy) way to get stock rom with branding back on the phone (the only one maybe with a nandroid backup of stock from someone else?).
I'm having the same trouble as dedors. Absolutely no USB data connection. Can't get anything going in nvflash, smart flash, recovery, or when running normally. I've tried uninstall and reinstall the drivers, multiple cables, multiple computers, multiple OS including win7 xp and Ubuntu. USB debugging enabled, disabled, wiping the SD cards, trying with no external sd card. The only glimmer I've seen of it working was when I plugged it into my old XP laptop before and it prompted the computer to install a driver for the webcam that I'd mistakenly uninstalled. I tried cleaning out the USB port in case it had a bunch of lint stuck in it and the cable just wasn't sitting properly.
I don't know at what point it stopped working but it has had no serious abuse that could cause any physical damage.
Oddly it still charges just fine.
Can't return for RMA as it's running Cyanogen 9 and I've no easy way to get it back to stock. I also had this problem on Cyanogen 7. I could probably flash a stock rom onto the phone but I wouldn't be able to nvflash the original recovery.
A lot of people seem to have had USB trouble with this phone.
Happy to provide any logs that may help the diagnosis though you may have to explain how I can acquire them as I only know basic flashing.
Sorry for the lengthy first post, trying to be thorough.
Thanks in advance for any help offered.
I can't think of any solution to your problem (in my opinion it seems like a faulty USB port, it seems to be "popular"), but I can suggest you a workaround... it's actually the workaround I've been using cuz I also have trouble with USB... get an SD card and a USB to SD card adapter...
Or that ftp/wireless trick that was mentioned above, I actually don't know how to do this but I would definitely like to
Yeah that does seem to be the case. At least I can still flash roms and so on. So long as it lasts me the rest of the year I don't mind grabbing a new one then.
Anyone who knows about logs for trouble shooting, can you suggest a way that I might try to diagnose the problem. If I can be sure the port is stuffed and nothing I can do will fix it I'm ok with that but I'd like to know whether I should keep looking for solutions or give up on it.
Cheers.
Hello,
I've got a new issue with my phone updating CM10 and today it's impossible to boot.
I've tried to plug it on my computer in order to flash it but got the same probleme as the first post : nothing happened when plugged on my computers.
Does anyone got this 3.6 drivers somewhere ? seems that the new ones from LG didn't works ....
I have the same problem
I how bought my phone (LG P990), 6 months old, used. I come home and try to connect it to the computer and it won't be recognized. Somehow I manage over that code 1809 # * 990 # to enter the menu and play with the ports I was able to connect to the computer and do the official update to 2.3.4. over LG software.Once again, this comp will not recognize phone (only charging), but using code 1809 # * 990 # and tampering on port settings it was able to connect to the computer.
Now after some time do stupidity and Root my mobile phone(SuperOneClick) and install clockwork-5.0.0.3 and via zip CyanogenMod 9. I tried all the ways that exist but pc does not recognize the phone anymore. After some time, the official ICS update is coming, and now that you can not connect the comp how to update mobile phone. I do a recovery back to the official Android 2.3.4 (I had to change the partitions, 2.3.4 and ICS use different sized partitions) and I run a mobile phone that is again official 2.3.4 and try entering the menu (1809 # * 990 #) by tampering with ports settings I tried to make comp to recognize the phone but to no avail. I tried to change the usb cable, use a different USB port on comp but nothing, no response just recharging.
After googling I managed to find recovery from ICS V28g and I managed to install it to have a functional phone. I contacted 2 service both refused to accept phone because rooted. I tried all the tricks without battery holding vol + and - to enter into APX mode, nothing then Power and vol - S / W mode that worked but comp ga would not recognize until now even that does not work (appears LG logo and when S / W should appear then goes off) and all the other tricks that I found on the internet, reinstall the drivers, I do not know what else.
Oh yeah and I noticed entering the settings on mobu System Settings / About Phone / Software Information / Baseband version - unknown
Link to image-->h_t_t_p://s1.postimage.org/9317bfezz/2013_01_11_12_36_01.jpg
Hi,
I've found an old 3.6 driver, but nothing works even with it ... I think I must change my phone -_-

[Q] Very puzzling USB phone issue-please help

I have the sprint htc one m7, I have been connecting it to my PC widows 7 64bit for the past year without any issues. I have the proper drivers installed on the pc. Now when I plug in via usb I get an immediate error message= on the pc it says DEVICE DRIVER SOFTWARE NOT SUCCESSFULLY INSTALLED, on the phone it says USB HOST CABLE IS PLUGGED IN UNABLE TO CHARGE.
I think the problem is with the phone because I have tried two computers different usb ports and cables and get the same. I also tried my wife’s phone and it works as it should. She has the same phone only difference is mine is rooted (stock4.4.2) and hers is not rooted.
I have tried uninstalling the drivers and reinstalling and get the same thing.
This is really bugging me because I don’t know what changed on my phone to cause this.
Please Please help if you can. I have searched for the solution without any luck
THANKS
Doug
Quick note=Under the driver software was not successfully installed message on my pc it says MTP USB DEVICE then has a red X with DEVICE UNPLUGGED next to it?
It is however able to see the phone when i put it in Fastboot= Fastbootusb.
What the heck is going on???
another note= after plugging it into the computer and getting the errors, when i plug it in to the wall charger it will not charge. Unless i reboot it then it will charge.
Anybody got an idea?
dug13 said:
I have the sprint htc one m7, I have been connecting it to my PC widows 7 64bit for the past year without any issues. I have the proper drivers installed on the pc. Now when I plug in via usb I get an immediate error message= on the pc it says DEVICE DRIVER SOFTWARE NOT SUCCESSFULLY INSTALLED, on the phone it says USB HOST CABLE IS PLUGGED IN UNABLE TO CHARGE.
I think the problem is with the phone because I have tried two computers different usb ports and cables and get the same. I also tried my wife’s phone and it works as it should. She has the same phone only difference is mine is rooted (stock4.4.2) and hers is not rooted.
I have tried uninstalling the drivers and reinstalling and get the same thing.
This is really bugging me because I don’t know what changed on my phone to cause this.
Please Please help if you can. I have searched for the solution without any luck
THANKS
Doug
Quick note=Under the driver software was not successfully installed message on my pc it says MTP USB DEVICE then has a red X with DEVICE UNPLUGGED next to it?
It is however able to see the phone when i put it in Fastboot= Fastbootusb.
What the heck is going on???
another note= after plugging it into the computer and getting the errors, when i plug it in to the wall charger it will not charge. Unless i reboot it then it will charge.
Anybody got an idea?
Click to expand...
Click to collapse
This is probably the most drastic method to fix it but the most likely way to fix it. Flash a RUU it reverts EVERYTHING to stock and deletes everything you had in the phone.
Since the computer recongizes it in fastboot RUU will work. Make a backup and if you are S-On then you have to relock bootloader first
Thanks for the reply, i thought about RUU and will probably have to attempt it. Im just not sure if its a software or a hardware issue? Everything else on the phone seems to be working fine. It just will not show up on any computer, i have tried 3 different computers and even installed HTC sync software on one and I still get the same error message.
Does this sound like a software issue or a hardware?
What do you think?
dug13 said:
Thanks for the reply, i thought about RUU and will probably have to attempt it. Im just not sure if its a software or a hardware issue? Everything else on the phone seems to be working fine. It just will not show up on any computer, i have tried 3 different computers and even installed HTC sync software on one and I still get the same error message.
Does this sound like a software issue or a hardware?
Click to expand...
Click to collapse
What do you think?
dug13 said:
What do you think?
Click to expand...
Click to collapse
sounds like a software problem since if it was hardware it wouldnt show up in fastboot either.
PLEASE HElp RUU failed to fix???????
ok as stated in the OP my HTC one wont connect to my pc. The only time is connected was in fastboot, so i did an RUU to attempt to fix the problem. After a successful RUU I still have the same problem= usb debugging is on i plug it in, it says installing drivers. Then I get the red X and the error message says =HTC MTP DEVICE IS UNPLUGGED & HTC MTP DEVICE FAILED.
I know everything else is working because my wife's phone connects no problem- so its not the usb port or cable my setting are the same.
ANYBODY GOT A SOLUTION?
PLEASE HELP- TIA
DOUG
dug13 said:
ok as stated in the OP my HTC one wont connect to my pc. The only time is connected was in fastboot, so i did an RUU to attempt to fix the problem. After a successful RUU I still have the same problem= usb debugging is on i plug it in, it says installing drivers. Then I get the red X and the error message says =HTC MTP DEVICE IS UNPLUGGED & HTC MTP DEVICE FAILED.
I know everything else is working because my wife's phone connects no problem- so its not the usb port or cable my setting are the same.
ANYBODY GOT A SOLUTION?
PLEASE HELP- TIA
DOUG
Click to expand...
Click to collapse
try talking to htc offical live chat
dont mention anything about being s-off or being rooted though they wont help you then.
as long as you are ruu you should have everything stock

Note 5 (N920I) USB/OTG Issue [No computer will recognise the device]

Ok ladies and gents,
I've been on a mission to root my Note 5 N920I for months now.
My problem is no computer will read/recognise the device. The Mac's seem to not even recognise it's plugged in, with Windows, no matter which driver I install it keeps telling me the "device descriptor failed blah blah blah". I managed to root my S4 very easily on Mac with Jodin3 so I know that it ain't no user error.
I've Googled and Googled ways to root without a computer or installing a custom recovery without root, but from what I understand I can't flash TWRP as recovery without a computer and therefore cannot root without a custom recovery.
I've Googled ways to fix the USB issue by making the xml file and putting it into the correct folder, but for that I need to be rooted. Right?
When she's plugged into a computer with USB debugging on or off nothing comes up in my notifications except for charging. I tried using the toolbox which I found on here (sorry can't remember the name) though it seemed like I was getting close, I couldn't get close enough before my temper got the better off me.
If my memory serves me correctly the OTG function worked when i first got the phone but didn't after the first update. My mate's Note 5 also has the same issue. I Googled it and seemed it was common issue on these phones.
I've tried to learn some Terminal/Command Prompt to see if I can fix it that way through Debian or whatever, only got as far as understanding it, kind of. Big ups to all you coders/programmers out there it really is an artform.
So PLZ PLZ can y'all help me, there has to be a way aside from setting this thing alight and getting a new phone.
My next mission, which I only embarked on a couple nights ago is unbricking my dad's Note 4 (N910G) that just hit the **** one day after spazzing out for a few days then would not turn on. I'm getting close though I haven't put much effort into that yet.
Any advice will be greatly appreciated, thanks in advance. ?
Anyone??
$pooLz said:
Anyone??
Click to expand...
Click to collapse
1)First of all have you enabled usb debugging and oem unlocking options enabled from developers options?
2)Install latest usb drivers for your model no on pc, use original usb cable to connect your phone
3) Try different usb hub-ports on your pc, it is recommended to use main-usb port to connect device properly which is mostly located backside of cpu cabinet
4)Does odin recognises ur device? If yes then you can flash twrp and cf autoroot both ( Sometimes Kies or smartswtich like programmes enforces device not be reognised, so uninstall them before trying to connect and flashing thorugh odin)
5)Try to update device drivers manually from Pc's administration
6) Try to connect your phone on another pc running windows and see if it recognises your device or not
I've tried all of that, i have a 09 Macbook Pro hand me down running Yosemite with Windows 8.1 Pro n just put Ubuntu on her today through Parallels. None of which recognise the phone being there.
I've plugged it into 2 HP PC's and both just keep telling "device descriptor failed". They're both kinda old too.
Unless someone has a specific driver they've made or found or could make me?? Clearly I'm a noob.
Closest I've found is https://github.com/452/USBHIDTerminal/wiki/How-to-enable-USB-host-API-support but still need root or system mounted as rw.
Any other ideas? Any ADB codes anyone could help me with ?

Categories

Resources