Related
Hi guys,
I tried to upgrade my trinity and it stopped at 80% with error about connection problem. I've entered bootloader manually (I get:
"TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000")
I then run the updater again, and it fails at %1 every time with "error 270"
How can I restore my device ?
Which updater are you using?
Try a ROM that matched your CID (official HTC Rom if you have a non-branded device).
Good luck.
The crash happened when I tried to update to mUn wm6 rom
Now I've got the same issue (error 270) with all the roms (even the one matching my CID)
The problem is that it says that my device sould be synchronized with activesync but I cannot connect to activesync as it only start in bootloader.
tonio94 said:
The crash happened when I tried to update to mUn wm6 rom
Now I've got the same issue (error 270) with all the roms (even the one matching my CID)
The problem is that it says that my device sould be synchronized with activesync but I cannot connect to activesync as it only start in bootloader.
Click to expand...
Click to collapse
You definitely should've followed other forum member's suggestion to flash HSPL before trying mUn's WM6 ROM... I might be able to help you, though, contact me in private if you want.
I hope your trin will get alive again!!!
Please post any news after pms...
Good luck bro
Unbricked thanks to stepw. You're a genious stepw thank you so much
OK, can you please write here the procedure that helped you?
So if anyone else will have same problem, it will see the solution...
Thanks!
same Problem here with Herald....How can i flash from Bootloader if i don´t have the original HTC Rom file, that fits my CID ?
Thanks !
stepw sent me a tool he made to flash HSPL from the PC. As he is still working on it, he asked me not to distribute it but I think you can ask him with a private message
A little correction - HSPL was NOT flashed to tonio94's device, unless he flashed it manually.
I'd bought my htc p3600 pro (black, free from sim-lock & free from any carrier) from London.
As advised by TRINITYGUIDES.INFO site I tried to do HardSPL with all the three available HardSPL files, but of no avail.
When the HardSPL's progress bar comes(on pc) it gives a message on my phone " Enterbootloader.exe....This may harm your device...Do you want to continue.." I pressed yes & the process stopped & gave an error on pc "Error 246 Device not responding" & on phone screen showed the bootloader with
TRIN100
IPL-SSPL by Des
TRIN100
SPL-1.07.ds
I did soft reset on my p3600 & its working as usual with it original spl infos.
I want to put official WM6 SEA version(ROM+RADIO) on my phone...Please help.
I too have the same message when I try to upgrade to hard spl as per teh guide here: http://trinityguides.info/index.php...ask=view&id=25&Itemid=66&limit=1&limitstart=2
Can anyone help? I have tried updating active synch... could there be anything else?
I have flashed my rom befroe to unlock the GPS but I now want to upgrade to WM6.
I guess the hard spl is a failsafe and I can skip this step?
Thanks
wingnutLP said:
I too have the same message when I try to upgrade to hard spl as per teh guide here: http://trinityguides.info/index.php...ask=view&id=25&Itemid=66&limit=1&limitstart=2
Can anyone help? I have tried updating active synch... could there be anything else?
I have flashed my rom befroe to unlock the GPS but I now want to upgrade to WM6.
I guess the hard spl is a failsafe and I can skip this step?
Thanks
Click to expand...
Click to collapse
Search is great function
http://trinityguides.info/index.php?option=com_content&task=view&id=37&Itemid=67
wingnutLP said:
Sorry!
I am an idiot.
Thanks
Click to expand...
Click to collapse
sorry I tried a Google search on the error message and came up with this thread!
wingnutLP said:
sorry I tried a Google search on the error message and came up with this thread!
Click to expand...
Click to collapse
Search more...
With this link:
http://www.google.com/advanced_search?q=+site:http://forum.xda-developers.com&hl=en&lr=&as_qdr=all
if you search error 246 you will get the solution on 11th answer.
Search more...
Have the same [Error 246]! How can I definitly fix it?
Hi,
first of all, sorry for my poor English. I try to explain my problem so good I can... I hope you can help me.
I have the "[Error 246] Device not responding" problem.
I have used a lot the "search"-function and I have found a lot of posts which propose the same solution "restart the Rom upgrade another time". Ok I did it and my PDA works very well, but now I would like to solve the problem radicaly... How can I solve this problem? Should I use SPLexploit (I have found the guide on trinityguides.info) and then reflash a Hard-Spl?
Thx a lot
ciao
Tompo
Some specifications....
Sorry.... I have a P3600 White with Olipro 1.20 and rom Elias 1.9 SE Lite...
Tompo81 said:
Hi,
first of all, sorry for my poor English. I try to explain my problem so good I can... I hope you can help me.
I have the "[Error 246] Device not responding" problem.
I have used a lot the "search"-function and I have found a lot of posts which propose the same solution "restart the Rom upgrade another time". Ok I did it and my PDA works very well, but now I would like to solve the problem radicaly... How can I solve this problem? Should I use SPLexploit (I have found the guide on trinityguides.info) and then reflash a Hard-Spl?
Thx a lot
ciao
Tompo
Click to expand...
Click to collapse
Before flash manually enter bootloader. After start the rom update utility. (As www.trinityguides.info suggest). You will not get error 246 any more
thanks for answer
Many thanks for anwser...but...
Is this the only solution? If is so, then everbody has this problem, isn't so?
Ciao
Tompo
Tompo81 said:
Many thanks for anwser...but...
Is this the only solution? If is so, then everbody has this problem, isn't so?
Ciao
Tompo
Click to expand...
Click to collapse
www.trinityguide.info
Here is written to flash rom you should manually enter to bootoader. In this case, you will not have error 246.
Most of the people know this, so they have not this problem
Those who not manually enter bootloader can get error 246, and this way of flashing is not as safe as the manual bootloader way.
(because in this case you use the spl uploaded by RUU, not the hard-spl on the PDA)
Ok, now I really understand
Ok, this is a very good anwser, short and clear... thanks...
Ciao
Tompo
fktsndr said:
www.trinityguide.info
Here is written to flash rom you should manually enter to bootoader. In this case, you will not have error 246.
Most of the people know this, so they have not this problem
Those who not manually enter bootloader can get error 246, and this way of flashing is not as safe as the manual bootloader way.
(because in this case you use the spl uploaded by RUU, not the hard-spl on the PDA)
Click to expand...
Click to collapse
When i connect my touch hd to pc in active sync mode, then shutdown device an run in bootloader (volume down and power button at same time) i get the tricolor screen and after a while i get the progress bar on my phone and on pc. But i stays on 0% and says 'update error' after a while.
please help
I Have the Same Problem the Status bar Freeze On 0% and nothing happened
Until the Update Error Message Displayed
Please Advice
Thank You
Note: I Have HTC Diamond2 (Topaz) Without Sim Louk
Hi Me has the trinity 3600 as a VPA GPS vodafone branding, and i get the same error message trying to run the bootloader and entering tricolor screen, ---> error 246 aber manually starting into bootlaoder and restatrting the romupdateutil.exe same error 260 no connention...
So you guys have a working version of the updating ?
And please remove all the links which are not working, linking a solve for the 246 problem, there are nomore links available...
thanks
Dome
I found a way to solve the problem 246 go in you mobile device, -->start -> settings-> connections ->USB to PC open this. Remove the hook @ Advanced networksettings activation! ---> click OK--> close
try again the bootloader etc, then on the tricolore reboot screen is shown USB in the lower white field and the bootloader can do its routine complete.
Have Fun with flashing the phones!
Testet with original German Vodafone available ROM " vpa_comp_gps_RUU_Trinity_VF_DE_1_23_162_4_6275_1_29_00_01_13000_108_Ship.exe "
testet with ZackMcRofls superfast german rom " RUU_Trinity_GER_1.23.162.2_GPS_v3f_by_ZakMcRofl "
testet with
" htcp3600_RUU_Trinity_HTC_GER_1-23-407-2_103_6275_1-38-00-11_108 "
First was Zack´s rom, 2nd. was Original Rom, 3. was Trinitys rom, after trxing all, i flashed Zacks Rom again, it was the best in my view.
Thank you verymuch, bb
please can anyone tell me what to do when you get error 262? I am trying to unlock my diamond with olipro's unlocker, but now the setup recommends me to downgrade because of a problematic radio. So i tried to flash it, but the progress stucks at 0%. after a few minutes, I get error 262. what to do now? if antone can tell me how to solve this problem, please tell it and i'll donate. I'm sorry i'm 15 and this is my first wm phone.
[ElCondor] said:
please can anyone tell me what to do when you get error 262? I am trying to unlock my diamond with olipro's unlocker, but now the setup recommends me to downgrade because of a problematic radio. So i tried to flash it, but the progress stucks at 0%. after a few minutes, I get error 262. what to do now? if antone can tell me how to solve this problem, please tell it and i'll donate. I'm sorry i'm 15 and this is my first wm phone.
Click to expand...
Click to collapse
Yes, you must downgrade Radio's. Example: 1.00.25.05
Flash this via Internal method:...Press Here
All questions/issues related to Olipro's unlocker should be posted in his thread.
Hey guys,
I have a problem when I want to update my Sony Ericsson Xperia x1 with the christian rom version 5.310 full. I flashed my mobile and It said it was fine. After that I wanted to update the ROM. But everytime i'm getting the update error 262. When I do the adviced recovery and try again it doesn't work. I also tried a soft reset, pc reboot and install the HARDSPL again. But nothing seem to work.
When the rom is starting to update I hear the sound of the disconnection of my mobile. Then my mobile gets the tricolor. With following information.
kovs110 spl-0.78.0000
microp1-787 microp2-707
Then I get a proces bar and after 20 seconds I get the update 262 error. Please help me I really want this rom.
nelis44 said:
Hey guys,
I have a problem when I want to update my Sony Ericsson Xperia x1 with the christian rom version 5.310 full. I flashed my mobile and It said it was fine. After that I wanted to update the ROM. But everytime i'm getting the update error 262. When I do the adviced recovery and try again it doesn't work. I also tried a soft reset, pc reboot and install the HARDSPL again. But nothing seem to work.
When the rom is starting to update I hear the sound of the disconnection of my mobile. Then my mobile gets the tricolor. With following information.
kovs110 spl-0.78.0000
microp1-787 microp2-707
Then I get a proces bar and after 20 seconds I get the update 262 error. Please help me I really want this rom.
Click to expand...
Click to collapse
No need to open a new thread with this question, please post your question in the ROM thread or in the hardSPL thread.
KOVS110
SPL-0.78.0000
means you haven't hardSPL'ed your device, so hardSPL first and then flash the ROM. When you hardSPL'ed correct it should say:
KOVS110
SPL-0.72.Olinex.
For problems with hardSPL please read the hardSPL sticky
Thank you Lokatho, concise as usual. I totally concur.
Mod. edit: Thread closed for being answered, but also for being duplicate.
For the future pls consider stickies and searching first. DK
please help me to flash rom always stack on 13%..
please help me..
Please try to read posts regarding updating your unit. You can brick your phone if you don't know what you are doing.
Additional information:
What is your present ROM version?
What ROM are you trying to install?
is your unit unlocked?
Does your unit have hard SPL installed?
ferdiebaq said:
Please try to read posts regarding updating your unit. You can brick your phone if you don't know what you are doing.
Additional information:
What is your present ROM version?
What ROM are you trying to install?
is your unit unlocked?
Does your unit have hard SPL installed?
Click to expand...
Click to collapse
i do, but the problem is vender id,
im tryn to install wm6.1 then always error vender id..
i forgotten now what is the previous rom version.
hard spl? like 1.20.0lipro? yah i already use it,
sorry for my bad english..
jheizee said:
i do, but the problem is vender id,
im tryn to install wm6.1 then always error vender id..
i forgotten now what is the previous rom version.
hard spl? like 1.20.0lipro? yah i already use it,
sorry for my bad english..
Click to expand...
Click to collapse
I have the same problem
but can't instal bootloader or flash any ROM
I tryed to flash the original rom but it stucks to 13%
I tryed to instal many bootloaders but when it cames to 100% it says that image is corruped (error 270)
can any one help me ??
up guys.. please i really need your help..
i want my trinity back..
OK. I've had that problem before when I first got my Trinity. Been through a lot of trial and errors before I was able to do it correctly. I don't know if this can help but this is how I did it. Usual warning.... I am not responsible if you brick your device.
Just look for the following files in the Trinity thread and install them in the following order:
1. HTC Trinity SIM & CID Unlock - v1
2. Install Olipro 1.20
3. Now I don't know if this should be done but I read somewhere that you should upgrade your Radio version so I installed "Trinity_Radio1.56.70.11"
Even though I have done these steps already I always do them again WHENEVER I install a new ROM. It does not hurt to repeat them.
If you are getting "error vender id" message then it means that your unit is locked again so you have to unlock it again like I said in my previous post. You must have installed an official ROM previously which will lock your phone again.
please help me to get my trinity back
i think that my phone has been locked because i can't instal any ROM or HardSPL
I tryed to flash windows d. 3.3 Dmore (wm 6.1) but when i boot windows it stucks in the green screen so i can't run cid unlock.
i cant send the phone for servise because i get it from a friend and i havent the receipt
please help me to get my trinity back
thanks guys.. my trinity is alive again.. hehehe
i just remove the radio.nb and its continue upgrading..
but the problem im facin now is everytime i flash radio its always stuck at 0%..
i think my radio bootloader is damage?..
any idea?
any have a schematic of radio ic? where i can find it? how does it looklike?
try to use SSPL, after flash official ROM and then try again from beginning
maybe can help...