Database Develop

Opening Messages - opens at BOTTOM of message?!

Anyone else? Open a message (any type) and it opens at the bottom of the message, so that I can't see the message or who it's from without scrolling up. It's annoying!
Also, if I use the D-pad to scroll through the messages, each message opens up in the same manner - at the bottom.
Is there a fix for this?
Thanks,
FrankyG

You posted the exact same question over on MoDaCo - and I answered it, so here's the exact same answer again
This is/was a common problem on the Hermes / TyTn I - but only if you'd installed a "tweak" utility like HTweakC or PimpMyBlack. There is a registry key (see below) that needs to be set to a value of 1 in order to prevent the auto-scroll-to-end in messages etc. The only downside to setting it to 1 is that you can't then scroll around pages in PIE using the D-Pad, you've got to use the stylus.
Code:
\HKLM\Software\Microsoft\Internet Explorer\Navigation\4-Way Nav = 1
If you've got the stock ROM on your TyTn II, then this may be the default setting; if you've flashed or installed tweaks, then this behaviour may be the result of that.......
HTH,
Mark.

Mark Crouch said:
You posted the exact same question over on MoDaCo - and I answered it, so here's the exact same answer again
This is/was a common problem on the Hermes / TyTn I - but only if you'd installed a "tweak" utility like HTweakC or PimpMyBlack. There is a registry key (see below) that needs to be set to a value of 1 in order to prevent the auto-scroll-to-end in messages etc. The only downside to setting it to 1 is that you can't then scroll around pages in PIE using the D-Pad, you've got to use the stylus.
Code:
\HKLM\Software\Microsoft\Internet Explorer\Navigation\4-Way Nav = 1
If you've got the stock ROM on your TyTn II, then this may be the default setting; if you've flashed or installed tweaks, then this behaviour may be the result of that.......
HTH,
Mark.
Click to expand...
Click to collapse
Thanks for the reply , twice
Can anyone with a stock TyTN confirm what the default registry setting is?
Thanks,
FrankyG

thx, working on htc tytn2! finaly i do not need to scroll down.
(it was coused by tweak2k.net on my device)

patr!k said:
thx, working on htc tytn2! finaly i do not need to scroll down.
(it was coused by tweak2k.net on my device)
Click to expand...
Click to collapse
What, specifically caused the problem? A specific tweak? cos I have tweak2k.net on mine also...

Frankyg said:
What, specifically caused the problem? A specific tweak? cos I have tweak2k.net on mine also...
Click to expand...
Click to collapse
As do I, and I still have the problem after checking my settings. Can someone give us an answer on how to fix this issue?

Frankyg said:
What, specifically caused the problem? A specific tweak? cos I have tweak2k.net on mine also...
Click to expand...
Click to collapse
hi,
i think it was just because there are some settings, when you can move mail attachments to the storage card. do not do that, i think this is main problem why msg are messed up after aplication this tweak.. anyway, i followed Mark Crouch's help and it works, so exported fixed registry and save for future usage

patr!k said:
hi,
i think it was just because there are some settings, when you can move mail attachments to the storage card. do not do that, i think this is main problem why msg are messed up after aplication this tweak.. anyway, i followed Mark Crouch's help and it works, so exported fixed registry and save for future usage
Click to expand...
Click to collapse
Huh? Could you explain a bit less cryptically?

Thanks a lot for the hint! I love this forum!

Bugs and fixes for TF3D (Landscape) centralize discussion

Since we don't have a common source of this new TF3D and every cooks have it's own implementation. I think it's better to centralize the bugs and fixes discussion to collects all the brain power/knowledge here to get this puppy stabilize.
Current base: TF3D2 from Topaz rom
Read the following rules before you filed a bug:
This thread is not about how to install TF3D and assume you got TF3D installed and working
This thread is intended to get TF3D working as what it should be. Go somewhere else for Mod/Customization, and how to do this and that.
Make sure you got Opera 9.5 installed as many features rely on it.
Read the existing list first before you file a new one.
Only report reproducible bug w/ details/steps to reproduce (Don't report any random crash/bug that you cannot even reproduce it)
You are welcome to report any existing bug that is not happening on you so that we could look into the diffs
Fixed Bug list (fixes in the attached zip file):
TF3D show HTC logo but won't start: Missing htcDutils.dll
Camera button don't start: Use the Camera package from Rhodium
"My contact card" in setting is not working / call history crash ..etc: Missing httpclient.dll
"Use Camera" in "Edit Contact Card" brings up video recording instead of picture taking: Set HD Camera Apps as the default camera apps.
"Sim card not ready" error for SMS message (call history > call entry > Messages tab): Missing CommManagerDll.dll
"Key Lock" status is not saved after soft-reset. Fixed w/ latest Rhodium packages (don't remember exactly which). Current workaround is change it in registry.
Existing bug list:
Sms reader tab can show only 25 messages (I cannot confirm it since I don't have that many SMS msg)
TF3D Panel is not working. PM Pubba already to see if he could help

bug in itje 4.0 beta 3
- call history crashes almost all time
- "all people" crash after 1 swipe down
are ok in your rom?

guap said:
bug in itje 4.0 beta 3
- call history crashes almost all time
- "all people" crash after 1 swipe down
are ok in your rom?
Click to expand...
Click to collapse
I don't have this issue. I bet it's the missing httpclient.dll

httpclient? Can you share this file? I have the same issues as itje in my rom
http://forum.xda-developers.com/showthread.php?t=486582
edit:thx, found by myself but it doesn´t work. I just copied it to the windows folder, let´s see if there´s a change by cooking it in but I think it won´t help. Maybe there´s a missing reg key or sth. like this.
@guap
What do you mean by swiping down? The contact pictures in TF3D? I don´t have this issue, only the issues in the call history tab.

jackleung said:
I don't have this issue. I bet it's the missing httpclient.dll
Click to expand...
Click to collapse
yes, I found the refrence to this too..
But I have not yet found what cause the weather not to show up on calendar tab "today" tab
any one?

Hmm weather shows up in weather tab on my rom. Did you set your city in the clock settings area? I think thats what causes it to work

weather shows up in your B3 as well Itje.
It's set exactly as Bxsteez says, you have to change the location in the clock..

I can not get it to change to farenhiet though. Oh well something is better than nothing

Bxsteez said:
I can not get it to change to farenhiet though. Oh well something is better than nothing
Click to expand...
Click to collapse
nto much of an issue here, we use both F and C, often at the same time!

fards said:
weather shows up in your B3 as well Itje.
It's set exactly as Bxsteez says, you have to change the location in the clock..
Click to expand...
Click to collapse
lol, typical
sometimes you work so much to find a sollution that you are looking to deep into it, and not seeing the easy one right before your eyes...

Camera button don't start: Use this (rename 2 files from cameraHD to camera), or camera.exe provided by Itje
Click to expand...
Click to collapse
Quick question on this. This is for the camera button in the pictures tab or the hardware camera button?

itje said:
lol, typical
sometimes you work so much to find a sollution that you are looking to deep into it, and not seeing the easy one right before your eyes...
Click to expand...
Click to collapse
Yeah sorry I didn't even realise it was a problem that one, until I saw this thread as I was playing with it earlier on today, I presumed it was common knowledge.
BXsteez, I think that's for the camera button in the photos tab.

So the camera application is called camerarunner.exe and i should rename camera.exe to camerarunner.exe

jackleung said:
"Use Camera" in "Edit Contact Card" brings up video recording instead of picture taking
Click to expand...
Click to collapse
What about this one? Do any of you encounter this or not?
Bxsteez, that's right. U can rename Skype.exe to camera.exe to have it called Skype instead in the Photo & Camera tab.

Ok cool. I have another little thing i want to do if someone can make me the cab.
If i'm reading the files in the keyboard package correctly we can actually edit how the keys are mapped and how hardware recognizes them. There is a file that is called et9.rhodium.wwe.kmap.txt that basically seperates each row of keys and tells u what happens when u press the funciton key. If someone still has the keyboard cab that was removed we can test out my theory.
**EDIT**
I found the cab and it looks like i was right. We might have a nice keyboard fix coming soon.

itje said:
yes, I found the refrence to this too..
But I have not yet found what cause the weather not to show up on calendar tab "today" tab
any one?
Click to expand...
Click to collapse
Can you share your solution?Is it the .dll that jack mentioned?
@jack
Yeah I got the same camera issue

it was very simple: select YOUR city (and not "local" in new clock tab

Bxsteez said:
Ok cool. I have another little thing i want to do if someone can make me the cab.
If i'm reading the files in the keyboard package correctly we can actually edit how the keys are mapped and how hardware recognizes them. There is a file that is called et9.rhodium.wwe.kmap.txt that basically seperates each row of keys and tells u what happens when u press the funciton key. If someone still has the keyboard cab that was removed we can test out my theory.
**EDIT**
I found the cab and it looks like i was right. We might have a nice keyboard fix coming soon.
Click to expand...
Click to collapse
How are you coming with this?
If this works with the latest Jerpelea Kitchen then I am happy to try tweak it to work.
Let me know, Kodiak

Bxsteez said:
Ok cool. I have another little thing i want to do if someone can make me the cab.
If i'm reading the files in the keyboard package correctly we can actually edit how the keys are mapped and how hardware recognizes them. There is a file that is called et9.rhodium.wwe.kmap.txt that basically seperates each row of keys and tells u what happens when u press the funciton key. If someone still has the keyboard cab that was removed we can test out my theory.
**EDIT**
I found the cab and it looks like i was right. We might have a nice keyboard fix coming soon.
Click to expand...
Click to collapse
have you seen my posts on this?

guap said:
it was very simple: select YOUR city (and not "local" in new clock tab
Click to expand...
Click to collapse
Thx mate, but I mean the contact tab which makes some problems. Itje said, that he fixed this issue.

@chefs: reward offer for "task-snoozing"

Dear Chefs,
thank you for all great work you have done so far!
I use the Energy ROM for about two months and I'm stunned about all the great features he provide.
However, there is one thing I can't stand: The lack of appointment- and task snoozing other then 5 minutes. This makes the remind function almost useless.
My German t-mobile branded TP2 (called: MDA Vario V) came with the option to snooze appointments and tasks by a selectable time. So I could choose remind me in one or half Hour for example or one day and many other options, rather than dismiss it over and over again every 5 minutes. This is really bugging me.
I found a fix from crackwhore but it seems to be not compatible with the current windows mobile 6.5 ROMs.
Because it is so important to me and, as I noticed, to many, many others I want to post a reward and invite everybody who want this feature to join me by posting how much you are willing to donate to the person who find a solution and share it with the community
A proper solution would be a fix that works for the latest generation of WM6.5 ROMs and it would be great to have it already cooked into the popular ROMs, including Energy ROM.
So if somebody finds a solution, everybody who joined me is asked to donate the promised amount to the person who provided the solution.
I start off with a offer of 10$
Feel free to join me and make suggestion.
And please be true to your word: Don't offer something you are not willing to donate.
Current Offers (25.10.2009 01:25 UTC):
10 US-$
and
0 €​

Why dont you ditch MS with another commercial application in the market? Couldn't you able to find one? I dont remember it but there was a program like this. Google it I suggest.

You can set the "reminder" time as any minutes/hours/days when you add an appointment. Am I missing something here?

NVM, I solved it! I was able to replace the new Notification.dll that handles the notification bubbles with an old, stock one. See the next post for the solution I made!
Question
Did your stock German ROM have the notification manager, where you'd click the taskbar, and it brings up that full screen? And also, did it have the skinned notifications, like the EnergyROM does? Please just describe exactly how the stock ROM handled the notifications, describe it visually.
Information
I researched this for 5 hours, and I was trying to do this: I wanted to make the Notification Panel remain (Full screen when you click on Taskbar), BUT, I wanted to use the standard Windows Mobile notification popups, because those allow you to snooze better. Well, that's not possible, from what I could tell. It's either all or nothing, you can't mix Microsoft's and HTC's notification system.
Solution
So, you have to disable the entire thing, which means you won't have the finger friendly notification system when tapping on the top taskbar. You can find the registry to disable Notification Manager here: http://forum.xda-developers.com/showpost.php?p=4125405&postcount=3

Advanced Notifications Power Snooze Appointments!
I solved it!! It's CABbed up, and available on my website, Wingster.
Get your solution here: http://thewingster.com/advancednotifications.aspx
And if you want to donate, then follow the link on the bottom of my Wingster website, or use this link: https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=5401195
Maybe I should have waited longer, for the bounty to increase! Nah, I did this mostly for myself, but it did end up taking 5 hours! I hate registries!
How I Created It
I found the old NotificationLayout.dll, and used that one for handling the notification bubbles! This brings back the old WinMo notification style popups, but it also keeps the finger friendly notification panel! Win-win!​

Imagine how fast the world is, I wish you could solve my break off with GF such a fast.
Have Fun, Cheers
Sunny

the solution that brings the old popups up, has been around since my touch x 6.0 and that is since december last year...
well well well......

Awesome. I had used the crackwhore one and it worked but this is better

ace10134 said:
Advanced Notifications Power Snooze Appointments!
I solved it!! It's CABbed up, and available on my website, Wingster.
Get your solution here: http://thewingster.com/advancednotifications.aspx
And if you want to donate, then follow the link on the bottom of my Wingster website, or use this link: https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=5401195
Maybe I should have waited longer, for the bounty to increase! Nah, I did this mostly for myself, but it did end up taking 5 hours! I hate registries!
How I Created It
I found the old NotificationLayout.dll, and used that one for handling the notification bubbles! This brings back the old WinMo notification style popups, but it also keeps the finger friendly notification panel! Win-win!​
Click to expand...
Click to collapse
Curious before I use this, how is it different than crackwhore's fix?

jank0023 said:
Curious before I use this, how is it different than crackwhore's fix?
Click to expand...
Click to collapse
FYI, crackwhore's is a better solution it doesn't eliminate the repeat function so what happens you get the alarm one time which was just as big a concern that I've had with some of the ROMs.

jank0023 said:
FYI, crackwhore's is a better solution it doesn't eliminate the repeat function so what happens you get the alarm one time which was just as big a concern that I've had with some of the ROMs.
Click to expand...
Click to collapse
shiat..might I add, you can uninstall the cab but the dll has been overwritten so some how I gotta find the original and use crackwhore's or hard reset plus crackwhores.

smaberg said:
the solution that brings the old popups up, has been around since my touch x 6.0 and that is since december last year...
well well well......
Click to expand...
Click to collapse
Lol dam. Wasted that effort for nothin? lol. Well we can add mine to the collection of CABs that do the exact same thing as the other

Hi,
sorry for the delay, but university was keeping me extremely busy this week.
However I'm glad you found a solution. It's so unimaginably convenient to be able to snooze the alarm!
However would it be possible to add some options? There is still room on the display for one option isn't it?
Very handy would be having options like four and twelve hours (half day).
I would rather surrender 10 minutes while already having 5 and 15 minutes.
(or maybe better: surrender 15 minutes while keeping 10)
However the current stage of development is already great and of cause I will stand my word of donating 10 bucks.
I invite everybody who like this fix to also support him since he was fair enough of not "waiting" for the bounty to increase first and he's doing a great job with his website anyway.
Best Regards, Time
PS: You are talking about other - already existing - solutions? I only found crackwhores fix and didn't get it to work. Well now I have a great one-click-solution I won't surrender ... would be just interesting to know.
PPS:
Question
Did your stock German ROM have the notification manager, where you'd click the taskbar, and it brings up that full screen? And also, did it have the skinned notifications, like the EnergyROM does? Please just describe exactly how the stock ROM handled the notifications, describe it visually.
Click to expand...
Click to collapse
By next week I will flash my ROM anyway so I could flash the stock ROM in between and check if that helps. Interested?

TheTimetraveler said:
PPS:
By next week I will flash my ROM anyway so I could flash the stock ROM in between and check if that helps. Interested?
Click to expand...
Click to collapse
Yea, flash the stock German ROM, and see how that operates. It'd be very interesting if they kept the advanced snooze options while keeping the slick notification style too.
I think that editing the DLL's is impossible though, but I guess it'd be worth a try. My initial goal was to keep the skinned notifications but add the snoozing. That'd be the optimal goal, and I will try to see if that can be done!

ace10134 said:
Advanced Notifications Power Snooze Appointments!
I solved it!! It's CABbed up, and available on my website, Wingster.
Get your solution here: http://thewingster.com/advancednotifications.aspx
And if you want to donate, then follow the link on the bottom of my Wingster website, or use this link: https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=5401195
Maybe I should have waited longer, for the bounty to increase! Nah, I did this mostly for myself, but it did end up taking 5 hours! I hate registries!
How I Created It
I found the old NotificationLayout.dll, and used that one for handling the notification bubbles! This brings back the old WinMo notification style popups, but it also keeps the finger friendly notification panel! Win-win!​
Click to expand...
Click to collapse
Sorry ace
it doesnt work for my TP2 with valkyrie.ftp v5.8.23534 wm6.5 15th feb (without footprint\doc)
the cab installs fine but no love when it comes to notifications

spiro said:
Sorry ace
it doesnt work for my TP2 with valkyrie.ftp v5.8.23534 wm6.5 15th feb (without footprint\doc)
the cab installs fine but no love when it comes to notifications
Click to expand...
Click to collapse
Yourestarted your phone after installing it, right? Maybe his ROM has some different notification system...I could try to look into it if you can confirm it still didn't take effect after a restart.

ace10134 said:
Yourestarted your phone after installing it, right? Maybe his ROM has some different notification system...I could try to look into it if you can confirm it still didn't take effect after a restart.
Click to expand...
Click to collapse
Yes I restarted the phone after installation but it didnt work
I would reeeeeally Appreciate it if you could look into it
You dont even need to make a .cab file, just give me some guidance on how to replace the .dll you mentioned in your post that worked

spiro said:
Yes I restarted the phone after installation but it didnt work
I would reeeeeally Appreciate it if you could look into it
You dont even need to make a .cab file, just give me some guidance on how to replace the .dll you mentioned in your post that worked
Click to expand...
Click to collapse
Well.....
First, download This File, unzip it, and place the DLL in the \Windows directory of your phone.
Now, here's where it may be different, apparently. Using a registry editor (like PHM Registry), try to find the string that is called CustomUIDLL and contains NotificationLayout.dll.
That string key should be located under HKLM/System/Shell/Notification/OEM, however since the CAB didn't work, Valkyrie must have changed the location of the registry key. See if you can find it. Once you do, change the string value to: "NotificationLayoutOld.dll"
Hopefully that'll get it working!

ace10134 said:
Well.....
First, download This File, unzip it, and place the DLL in the \Windows directory of your phone.
Now, here's where it may be different, apparently. Using a registry editor (like PHM Registry), try to find the string that is called CustomUIDLL and contains NotificationLayout.dll.
That string key should be located under HKLM/System/Shell/Notification/OEM, however since the CAB didn't work, Valkyrie must have changed the location of the registry key. See if you can find it. Once you do, change the string value to: "NotificationLayoutOld.dll"
Hopefully that'll get it working!
Click to expand...
Click to collapse
Thanks man!
Ill try it and post back

spiro said:
Thanks man!
Ill try it and post back
Click to expand...
Click to collapse
OK.
Under HKLM/System/Shell/Notification/OEM i have one folder named "reminder" and 3 other items named "default", " customUIDLL", and "userdefaultUI"
if i click on customUIDLL the string already reads "NotificationLayoutOld.dll" ( iguess from when I applied the .cab file) so there is nothing to change!
Also here is a screenshot of the contents in the HKLM/System/Shell/Notification/OEM/reminder folder that I mentioned above
should i be editing the autodismissextendedduration file?
BTW I forgot to mention that when i install the cab file instead of "snooze' at the bottom bar I get the "menu' on the right and also another symbol on the left (like a phone with an 'x' next to it" but if i click on any of them the notification goes away and does not come back
So in essence the .cab works (because it points it to something else) but the location it point to, doesnt contain the necessary file to show up when you click on the the "menu' icon or the other icon that comes up SORRY I DIDNT MENTION THAT EARLIER BUT I WASNT AWARE OF IT TILL NOW.....

[ROM] FIXED 6.5.3 23541 Final with ALL ramdisks! (ramdisk 0, 8, 16, 32, 48, 64 mb)

Hi
As 25006 was a sh.. we need something better, here we go!
Done with AeroKitchen 3
All ramdisks included
Contacts works
Bubble breaker works
New softkeys
Should be faster and stablier than 25006
Link:
HERE WE GO
Do mirrors and post!
Screenshots in attachments

Woo hoo!!!!!!!
Flyboy!!!!

is there a way to update through the SD card ??
Coz there is a problem with the USB connection, its only charging and I make back up through bluetooth
thanx

torontovka said:
is there a way to update through the SD card ??
Coz there is a problem with the USB connection, its only charging and I make back up through bluetooth
thanx
Click to expand...
Click to collapse
Read the sticky about it and use the search button within the forum. It's all in here.

after install(Ramdisk 64 mb), expire windows
"This copy of Windows Mobile expires within 30 days on 05/01/2010."

i try install PocketMusic v5.3.5(last version, support WM6.5).
after install set language but i can't see button OK.
and i open application HiCalc v2.7, i can't close this application. (no button OK).
and can't change the default keyboard settings.
after the select button ok, the default keyboard not change.
big thanks aeroflyluby

ImanD said:
after install(Ramdisk 64 mb), expire windows
"This copy of Windows Mobile expires within 30 days on 05/01/2010."
i try install PocketMusic v5.3.5(last version, support WM6.5).
after install set language but i can't see button OK.
and i open application HiCalc v2.7, i can't close this application. (no button OK).
and can't change the default keyboard settings.
after the select button ok, the default keyboard not change.
big thanks aeroflyluby
Click to expand...
Click to collapse
Man As I see you installed incorrect version Check the build in about.

I download a file this morning(install 64 mb). source link http://www.4shared.com/file/256658728/338c0b7f/RELEASE23541.html
See About
whether you uploaded the wrong source?

ImanD said:
I download a file this morning(install 64 mb). source link http://www.4shared.com/file/256658728/338c0b7f/RELEASE23541.html
See About
whether you uploaded the wrong source?
Click to expand...
Click to collapse
Did you notice that softkey bar is diffrent between this screen and screens above?
Also, WM6.5 applications would not work on 6.5.3, because of dirrfent shell, you can assign OK/Close key to any hardware button and use it like a magic, it works in most cases

aeroflyluby said:
Did you notice that softkey bar is diffrent between this screen and screens above?
Also, WM6.5 applications would not work on 6.5.3, because of dirrfent shell, you can assign OK/Close key to any hardware button and use it like a magic, it works in most cases
Click to expand...
Click to collapse
OK, sip thanks.
btw about expired of windows?

ImanD said:
OK, sip thanks.
btw about expired of windows?
Click to expand...
Click to collapse
It;s fixed, it shouldn't appeatr, but if it does, try to find DeviceBeta entry in registry and change it to " "

Superb! Installing it now (64MB)
Will report if any more bugs found.
Regards
Jay

Two things noticed really
1: The expiration message pops up right after a fresh install (ImanD was right about this - please see attached pic)
2: After installing 64MB version, the RAM still shows as 14MB, is it right? or am I doing something wrong here?
More testing on its way.
Regards
Jay

hi rom is top speed but fantastic but got prob with ie will not show pages any ideas also cannot find registry was a full install 64 from 2003se any advice thanks

maxoutputuk said:
hi rom is top speed but fantastic but got prob with ie will not show pages any ideas also cannot find registry was a full install 64 from 2003se any advice thanks
Click to expand...
Click to collapse
I have to guess, what your problem is.
Search for Settings Network and switch from ISP to My Home Network.
Enter Advanced and check Proxy to 'connects to the internet'
Good Luck

Is it really a final version, because after a fresh install I got that message too. expires within 30 days.
The expire date shows when I enter the correct date exp. 2010-04-07, but if I let the date by default 2009-01-01 it doesn't show the expire message.

hi it seems to think its got the page and shows connection but no website on screen also no mms tried sprint crc and 50.3.1.7 arcsoftmms no good on o2 uk thanks for answering so quick

dante05 said:
Is it really a final version, because after a fresh install I got that message too. expires within 30 days.
The expire date shows when I enter the correct date exp. 2010-04-07, but if I let the date by default 2009-01-01 it doesn't show the expire message.
Click to expand...
Click to collapse
Oh so that was my fault, I didn't change date because it is waste of time (only-rom-flashing himalaya)
I will fix it.

Now we got him!
aeroflyluby said:
Oh so that was my fault, I didn't change date because it is waste of time (only-rom-flashing himalaya)
I will fix it.
Click to expand...
Click to collapse
Shame on you!!!
Go into prison, directly, do not pass Start, do not take any money!!!
I plead for a temporary shooting, as a mild, but fair, punishment.
Or shell we shave off his head and send him to death?
OK - ninety nine years more, of hima rom cooking, as practise.
I like to be prosecutor, defender and judge in one person! (smile)

Hi! First of all, thanks for an awesom ROM. No issues so far, except;
ActiveSync? It's not working? I turned off the advanced networking function but that causes the device to lock up when connected.
Am I doing something wrong or is this a known bug?

[ROM] Testing release of 23668

Hi
After a month I decided to cook something new.
Here is test release of new rom for our himalaya
Fixed problems from latest stable 23563:
- IE works great jupi
- Phone control panel came back in Personal tab
- 2 original ringtones
- MUCH stable xip, stablier system
- New wallpaper, oh yeah it is important
- Contact app works faster
- Updated MediaOS
- New organization of OS package, seems like rebuild
What is needed to test?
- Everything
- Timebomb (don't know I removed it)
- GPRS
- Last bugs, ex. installing apps
Screens in attachment
Link is:
http://www.4shared.com/file/UkjvCpnY/TEST23668.html
This version may be final as built now, so really test it hard.
Happy testing

keyboard
how about cooking in a skin for the keyboard?
will look much better

thank you friend.
thank you aeroflyluby.
rom verygood.andvery nice.

tnx for this sir luby ... downloading........

So, any bugs? Should it be final release? Does wallpaper is too bright?

aeroflyluby said:
So, any bugs? Should it be final release? Does wallpaper is too bright?
Click to expand...
Click to collapse
Just about to say, that wallpapers nice and floral!

Nice! downloading now
Will update soon
Regards

Hello. Just installed it. I think the bridge background was good. I am not sure if it is showing in others but my device show "shadow" with text and because the background is white it doesn't look good. So personally I'd get the bridge again .
Other than that so far its working smoothly
Will report more soon
Regards
Jay

I'll give this ROM a go now.
Just a question though, is there a way to change the button/menu style to the flat/black buttons? Not a fan of these new "bubble" buttons

Clontarf[X] said:
I'll give this ROM a go now.
Just a question though, is there a way to change the button/menu style to the flat/black buttons? Not a fan of these new "bubble" buttons
Click to expand...
Click to collapse
it is flat...

I attach for you 2 wallpapers
Which one should I choose to default?
Both are done by my at today with nikon d40 I love my girlfriend's nikon

ROM Tests great!
Thanks Aeroflyluby, of all the ROMS I have tested on the Himalaya, this is easily the best, fastest, and most usable. Awesome!
I would prefer the Background of the Kiwi Fruit over the flowers.
Only small issue with Calendar in WM6.5. Due to larger font can only see a few hours in "Day View", which means you have to scroll up and down to see all appointments in a day. Is there any way to change Day View to see most of the day like with WM6.1?
Keep up the good work.

tqis said:
Thanks Aeroflyluby, of all the ROMS I have tested on the Himalaya, this is easily the best, fastest, and most usable. Awesome!
I would prefer the Background of the Kiwi Fruit over the flowers.
Only small issue with Calendar in WM6.5. Due to larger font can only see a few hours in "Day View", which means you have to scroll up and down to see all appointments in a day. Is there any way to change Day View to see most of the day like with WM6.1?
Keep up the good work.
Click to expand...
Click to collapse
Ok kiwi fruit will be in release
Thanks for reporting calendar issue, I checked it and it is true, I just have to do a smaller font. Thanks
Continue testing ;>

downloading, your rom is my best choice, luby. sorry for my english

incase if you'r stuck, here is the method to remove the timebomb
hex edit the S000 in Shell.exe and search for HEX 0000004AB2FFFFEB (if this is still present, its not patched) or HEX 0000004A0000A0E1 (if this is present, it is patched). then cook & flash

Ather said:
incase if you'r stuck, here is the method to remove the timebomb
hex edit the S000 in Shell.exe and search for HEX 0000004AB2FFFFEB (if this is still present, its not patched) or HEX 0000004A0000A0E1 (if this is present, it is patched). then cook & flash
Click to expand...
Click to collapse
Okay thanks, I will implement it in kitchen for automatic timebomb removal )

hey aeroflyluby
if u need a skin for the keyboard its contained in "msim.96.dll"
i will upload a "msim.96.dll" so u can get the bitmap out of it to use in your kitchen i extracted it out of a installed ROM with ROMextractor and found the bitmap with res hacker
because i used ROMextractor it is no longed digitally signed with the WM 6.5 certificates
uploaded in a .7z file so u can get the bitmap as is out of the .dll

advanced15 said:
if u need a skin for the keyboard its contained in "msim.96.dll"
i will upload a "msim.96.dll" so u can get the bitmap out of it to use in your kitchen i extracted it out of a installed ROM with ROMextractor and found the bitmap with res hacker
because i used ROMextractor it is no longed digitally signed with the WM 6.5 certificates
uploaded in a .7z file so u can get the bitmap as is out of the .dll
Click to expand...
Click to collapse
Okay it looks pretty good, I would do a negative of it, but we will seee

HTC Task Manager
On testing a few apps designed for WM5/6.1, that have a toolbar along the bottom of the screen, so the WM6.5 StartBar is not visable, and therefore can't close the app except by using menu system, and selecting "Exit".
Is there any way to get back the HTC Taskbar, so we can have a task manager with "X" in the top right corner to manage these apps?
Thanks...

tqis said:
On testing a few apps designed for WM5/6.1, that have a toolbar along the bottom of the screen, so the WM6.5 StartBar is not visable, and therefore can't close the app except by using menu system, and selecting "Exit".
Is there any way to get back the HTC Taskbar, so we can have a task manager with "X" in the top right corner to manage these apps?
Thanks...
Click to expand...
Click to collapse
If you want it, install it. I won't include it.
You can assign any button to OK/Close