help with spb mobile shell - Touch Pro, Fuze Themes and Apps

ive used both spb mobile shell and touch flo, and i think spb wins against touchflo except for the media player part... though after a few days of using, ive encountered a bug i think, when i run need for speed underground it hangs at a black screen just after the loading message, i thought it was a minmo6.5 bug so i installed a game fix but still to no avail, ive also tried using teeter and this bug occurs too, i see the ball but all else is black but when the ball passes through an area, it becomes visible again.... lastly this problem occurs on the camera, it comes out black screen with the focus box in the middle, but once i go to options, its back to normal again.....
list of programs affected by black screen:
need for speed underground
teeter
camera
another problem:
i have htc album 2.5 and when i open it then go to lanscape, the picture flips to landscape but only after a few seconds then goes back to portrait...
now, i have reverted back to touchflo3d, the problems does not occur in tf3d2.. but i hate to go back to tf3d2, spb mobile is much better, i just dont know how to fix these problems... i believe that these problems are caused by spb mobile since it does not occur with tf3d2
by the way..
im a touch pro user
winmo6.5 energy rom 'magic' 23001 build
thanks in advance

try to disable the 3D accelerator in SPB settings

tried it but it didnt work, any other ideas? thank you

bump, anyone have any other suggestions?

Try installing the cab from this thread....propz to the original author
HTML:
http://forum.xda-developers.com/showthread.php?t=532200

i also did that already but that was not the problem, without that and w/o spb mobile the game runs smoothly but when there is spb mobile, the game crashes, huhuhuhuhu... i need help badly

bump, help pls......

Related

Has anyone noticed a slowness after installing SPB Pocket Plus?

I noticed my device is slower in particular when pressing buttons on the screen. Anyone else have that issue?
thanks
no problems here
Neither here, its quicker now that i can acess all my apps.
nope, works great... did you install it on the device or the card? I have on the device.
Only had this issue when I had the HTC Home plug-in on aswell as Pocket Plus
I've been using Pocket Plus for a couple of months and have had no problems with slowdown. The only time I noticed a drop in responsiveness was when I installed one of the Touchflo Cube apps - back to normal once I removed it.
so its not advisable (in terms of speed) to run spb p+ with the cube then? are there any other conflicts running spb on the tytn II? (eg running it with Dutty's v4 or with another app eg ce star)... cheers

Desactivating TF3D

Hi everyone,
In order to install SPB Mobile Shell 2, to test, I wanted to prevent TF3D from launching at each startup. I know there is a way ot desactivate it but will it remove the program from the memory ?
Does anyone has an idea ? I took a look on google but did not see anything.
Thanks for your help.
Start>Settings>Today>Elements>untick TF3D......it´s just another today plugin. BTW TF3D runs fine with MS2.1 on my Diamond.
Nevertheless I have TF3D now disabled - to much of a memory hog. Back to PocketBreeze, BatteryStatus and SPB PhoneSuite together with MS2.1.
djspank said:
Hi everyone,
In order to install SPB Mobile Shell 2, to test, I wanted to prevent TF3D from launching at each startup. I know there is a way ot desactivate it but will it remove the program from the memory ?
Does anyone has an idea ? I took a look on google but did not see anything.
Thanks for your help.
Click to expand...
Click to collapse
Do this to completely avoid TF3D
1. Hard Reset your Diamond (backup before of course)
2. After setting Time Zone and PIN, you see the "3 second" warning for installing HTC apps. Hit the RED soft reset button before the end of the 3 seconds to reboot. After reboot, you now have a clean WM6.1 without TF3D.
X. To bring back TF3D, just do another Hard Reset and let the TF3D install.
I do this myself and have clean WM6.1 with SPB Mobile Shell 2.1
Now I don't have the Blue-Tooth problem (due to TF3D Music Player)
And seems more memory to use than with TF3D
webmice said:
Do this to completely avoid TF3D
1. Hard Reset your Diamond (backup before of course)
2. After setting Time Zone and PIN, you see the "3 second" warning for installing HTC apps. Hit the RED soft reset button before the end of the 3 seconds to reboot. After reboot, you now have a clean WM6.1 without TF3D.
X. To bring back TF3D, just do another Hard Reset and let the TF3D install.
I do this myself and have clean WM6.1 with SPB Mobile Shell 2.1
Now I don't have the Blue-Tooth problem (due to TF3D Music Player)
And seems more memory to use than with TF3D
Click to expand...
Click to collapse
Oki, It seems a little bit hardcore but why not, I will try this.
Thanks for your help
Hi, i just got my diamond yesterday it hanged because i am a newbie and tried several things i do not understand and it suddenly hanged.
I tried the reset it by the small red button, and everthing seems to work fine. Howerever i am now not able to see the Big Digital Clock on the Home page. Pls.. advise on what to do.
I am thinking of doing a hard reset, but i do not know how... What are the risks on doing this and how to do it correctly.
Thank you...
What do you see instead? Nothing? Small clock? Bit more info would be useful....

Touchflo 3D vs SPB Mobile Shell

Hi,
I've read a lot of pros to deactivate TF3D and install Mobile Shell because of the performance, and i was hoping to hear from people theirs pros and cons and i DON'T mean "i like TF3D bla bla" but an explanation too!!
I thinks it's a lot of storage to be used, or can it be installed on the internal memory?!
TF3D lasted about 20 minutes for me, it looks great but didnt really give me what I needed, when I needed it.
I found it dreadfully slow and fairly clumsy ...yes, I know you can tweak it to the N`th degree now, but still seems to be more cosmetic than funtional. Just a thin flash skin over WM6, and it resorts back to WM6 when you have to do more in depth things with the phone.
I guess I was biased towards SPB Mobile Shell though, as I`ve used it on my last 2 phones (Tytn and Tytn II) and love the way it simplifies and speeds up using the phones. It is not just an improvement over the TF3D but also Windows Mobile. Far more user friendly!! (finger friendly)
I have the latest version on my diamond and love the ability to thumb/finger scroll through the options/section just as well as the TF3D, it`s still layed out well, although I don`t like the way they`ve done the frequently used/favourite programs bits... I liked having the start square infact I prefer the layout of the previous version (9 squares rather than the 6 squares and the messy favourites bar at top.)
It doesnt look as lovely and unified as the TF3D but I realise that you can change the theme. It can look a bit garrish with the multicoloured icons .
The now (today) screen is far more useful on SPB as you can add/remove options.. still not as customisable as real today screen (I probably haven`t found all the plugins tho ?)
I would download the trial as see what you think.
I give TF3D a big thumbs down and SPB Mobile Shell a big thumbs up
Hope this all makes some sense / is of some use, as am slightly sloshed *h*i*c* !
Where have you installed the progam files? In the internal storage or RAM (i guess it's called?!))
I installed it on the phone rather than the internal storage, seemed to be plenty of space. Never normally install to the phone area but feel (rightly or wrongly) that it helps running from phone memory ?? Still loads of room and phone flies along. Doesnt seem to as big an issue as it once was.
hi bro,
being an experience user with spb shell, can you kindly share with us with some skins that you are using?
I have the latest version of SPB Shell (though not installed at the moment as just flashed with a new ROM.
I prefer the SPB Shell as it is alot smoother and faster switching between the menus and the main today screen can be configured to give alot more info than the TF3D one.
For those that like to know the weather it gives you a breakdown of what the weather is going to be like at various times of the day rather than just now (I can look out of the window for that) and even the 5 day forecast can be viewed to see the expected weather at various times of the day.
As for skins the default ones that come with it are only different colours but having a choice of colours from scratch is better than the plain TF3D.
SPB Shell is very configurable compaired to TF3D but still not as configurable as some other Today screens unless like th eother poster said it comes in the form of other plugins.
I have it installed to normal phone memory and everythings fine. I haven't tried installing it to the internal memory but figure if I have to reinstall it if I flash a new ROM anyway I may as well make sure that it's cleared for a fresh reinstall.
Deffo one to give a try if you want something other than TF3D - smoother, more configurable, more skin options, ability to add more plugins.
I have to agree that TF3D is not something that is usable. As a matter of fact, I am very close to labeling it as a piece of crap. All the bad points of TF3D has been posted in this forums countless times and I do not want to repeat it. I am sticking with TF3D is because of one reason only. That is because it's the Diamond's identity. If I were to use other today plugins I would not have gotten the Diamond. Diamond and TF3D is like coffee and sugar/milk (depending on how you like it). Without it, the Diamond loses it's identity.
How about battery usage? Any difference there?
Vic5870 said:
I have to agree that TF3D is not something that is usable. As a matter of fact, I am very close to labeling it as a piece of crap. All the bad points of TF3D has been posted in this forums countless times and I do not want to repeat it. I am sticking with TF3D is because of one reason only. That is because it's the Diamond's identity. If I were to use other today plugins I would not have gotten the Diamond. Diamond and TF3D is like coffee and sugar/milk (depending on how you like it). Without it, the Diamond loses it's identity.
Click to expand...
Click to collapse
I agree with you. But where can TF3d Themes be found?
I have found two .theme files that works and easy to set up. O2 Blue and Orange Lite. But it would be nice to get something like the White Diamond
I think its better explained this way:
SPB can house many more functions. If you need your phones apps the whole day long an need to navigate your small system every minute, TF3D is really not the thing. SPB is very good, and takes care of every single corner on your phone. Highly skinnable, and fast.
I tried it, but you know, it's too much for me.
I like a lot of apps, but I don't use em every day. So I want to fast check Email, SMS, or weather, or make a call. For those basic functions I think TF3D is the best. Just grab phone, Thumb-thingy to the right tab and off you go.
I don't need something TF3D cant do. Well, some minor things, like agenda and tasks, but I guess that'll be fixed in a few weeks
I'll vote for the Shell too: I tried Flo, really tried as it looks so good, but found it was just unworkable!
Shell is clean and simple, and fast. Also, I use a P3600i in some situations (such as when I really want to hear incoming call rings) - using Shell keeps me to a common interface.
These are the setting that I use:
TABS Home TODAY Date
Time SPB Shell
Weather Owner
Dial Tab Messaging
Calendar
Fring
SPB Menu Internet IE/Opera + Favorites
No Data
Fring
Internet Sharing
Comm Mgr
Multimedia Media Player
Camera
Pictures
Voice recorder
Album
Tools Task Mgr
File Browser
Rotate
Lock
Profiles
SPB Backup
MemMaid
App to Date
Programmes (auto)
My Menu 1Calc
TomTom
Ozi
Stock Mgr
Best Crypto
FM Radio
Settings (auto)
I run TLR v3 - clean and stable.
Unrelated to SPB Mobile Shell, my final 'make it perfect' was to get rid of the ring delay by:
Diamond Phonepad skin: HKLM -> Security -> Phone -> Skin -> Enable (set 1 to 0), then reset
It all depends on what you do with your phone. I tried SPB Mobile Shell and it worked nicely. Quite happy with it. It's faster and more user friendly compared to TF3D. The homescreen also looks nice and it has a nice feature where you can move your finger in a downward movement from the taskbar to choose between the 3 pages of the shell. Although the Now screen is not very customizable (maybe it is with correct plugins?), the other page u can change every shortcut to programs and such. It's nice, but I don't tweak my Diamond anymore as I used to. I saw the Orange Theme with TF3D and I liked it alot. The analog clock looks great. If you're new with the Diamond and ur tweaking and changing and everything, I suggest you get SPB Shell (or just disable TF3D). But TF3D still looks better (orange theme that is)..
I just need to find a white .tsk theme for wm6.1.. All I see is grey/red/purple/whatever... Goodluck with this..

Igo V8 - Manilla issue?

I've tried searching with no effect.
I've got IgoV8 installed on my phone, running the latest Hyperdragon rom.
If I have manilla disabled then Igo will run no problem, Enable manilla and it won't load. No errors, nothing.
Tomtom works fine. Anyone got any ideas?
soopahfly said:
I've tried searching with no effect.
I've got IgoV8 installed on my phone, running the latest Hyperdragon rom.
If I have manilla disabled then Igo will run no problem, Enable manilla and it won't load. No errors, nothing.
Tomtom works fine. Anyone got any ideas?
Click to expand...
Click to collapse
You probably not using the latest version of the IGO8, I'm using 8.0.0.44366 and it runs smoothly on all the latest releases of HDIII as well as on some others (see in my sig below) I now that previous vers of the IGO8 had compatibility problems.
Cheers, just checked my device and i'm running 8.0.0.31442.
Will try an update.
I have a lot of problems running iGO when I have been running without a reset for a few days or I have multiple programs running..
iGO seems to demand a lot of ram to startup.. Not sure if it's some free/largest chunk type of check or if it truly attempts to load and it bombs out. I see the spiny busy cursor for a second or two then nothing else.. No messages from iGO.
I've pretty much given up on using it anymore.. Even when I do get it running by exiting most everything or doing a reset it seems like it only runs at most 20-25 minutes before it crashes.
BTW, I don't run Manilla or such, but I do run SPB Pocket Plus with Phone Alarm, SPB Weather, KaiserNotify, and Flexmail as my typical load.. And when I'm on the road, I typically also run TrackMe. This gives me about 30-35m of ram free typically, and when iGO is running it 'only' takes about 8m but it could need a lot more to startup, not sure.
khaytsus said:
I have a lot of problems running iGO when I have been running without a reset for a few days or I have multiple programs running..
iGO seems to demand a lot of ram to startup.. Not sure if it's some free/largest chunk type of check or if it truly attempts to load and it bombs out. I see the spiny busy cursor for a second or two then nothing else.. No messages from iGO.
I've pretty much given up on using it anymore.. Even when I do get it running by exiting most everything or doing a reset it seems like it only runs at most 20-25 minutes before it crashes.
BTW, I don't run Manilla or such, but I do run SPB Pocket Plus with Phone Alarm, SPB Weather, KaiserNotify, and Flexmail as my typical load.. And when I'm on the road, I typically also run TrackMe. This gives me about 30-35m of ram free typically, and when iGO is running it 'only' takes about 8m but it could need a lot more to startup, not sure.
Click to expand...
Click to collapse
Do you run HTC home? I had such problems when i have used Dutty's roms (not manilla), the conflict between Igo8 and htc home is a well known issue and you can find many posts on that.
I can get Igo8 to run correctly with Manilla2D (8.0.0.41506) so an upgrade should do the trick for you. this version seems to have a lot of problems if you minimize or exit the program. I think you are right with the ram, because occasionally Manilla2D will be closed when igo exits. I'm left with a screen that says "Click here to start touchflow2d" or something similar.
but a lot of times I just want to minimize IGo. and it is impossible to get it back if the running programs taskbar is hidden by manilla2d. running the program again opens a new instance, and causes all sorts of problems.
It wouldn't be so bad if Igo8 appeared in the task manager as a running program, but sadly it does not. I'm using the Opal task manager that is compatible with Manilla2D (XDA-Team TaskManager_2_1_34563_3.cab). Anyone know how to make Igo8 appear correctly as a running app in that task manager or any other solution to this issue?
All sorted, upgraded to 8.3.
Can you please sent link where can it be downloaded

[BUG] Spb Mobilshell 3 and S2P

Hi,
I installed Spb Mobile Shell 3 yesterday.
And damn, it looks really cool and everything is fine except one thing.
When I'm starting S2P the loading-circel rolls and nothing happens.
When I switch to the circle-menue of Spb Mobile Shell 3 (I don't know how wo call it, I hope you know what I mean ^^) My screen freezes and I have to do a soft reset.
It's the same with the new Opera mobile. It also wont start, but if I'm switching to the circle-menue Opera starts. It's also a bug but anyhow it starts.
I like S2P so pls help me if you know any solutions.
Yes I also made a reinstall
Same problem here with s2p.
S2p starts only if i have done a memory cleanup or close (exit) spb mobile shell.
Any help please...
_____________________________________
HTC Touch HD Official rom.
I don't know a solution but maybe it helps:
I use the german 6.5 Rom by bauner, the combination Mobile Shell 3 - S2U2 works great.
Miwu
i use spb ms 3 with energy rom 3 and s2u2 with s2p and it works pretty good, maybe u should change rom
the solution is disable 3D on spb mobile shell, only then start the S2P.
I try to find another solution, because I want to enable 3D. Something in the registry or other version of S2P....
Does anyone know anything?
Thanks for all, and sorry for my poor english.
yamagata9th said:
the solution is disable 3D on spb mobile shell, only then start the S2P.
I try to find another solution, because I want to enable 3D. Something in the registry or other version of S2P....
Does anyone know anything?
Thanks for all, and sorry for my poor english.
Click to expand...
Click to collapse
Hi,
I have the same problem, and I tried disabling 3D on SPB MS, but S2P still bugging.
Can anyone help me please?

Categories

Resources