Hello,
I've updated my X1 to WM 6.5 XTREME TITANIUM TF3D KILLER XPERT version. The phone went on and off by itself and i formatted my sd again, after that i put the WM 6.5 XTREME TITANIUM TF3D KILLER XPERT version on my X1 again.
and now it gets stuck at the orange wm screen and freezes. Can anyone help me with this problem.
Regards,
Thats happened when ur download files corruption .try hard resest yor phone, or download that packet again.
Hell yeah it worked thanks a lot mate was starting to panic.
One more question
How do i remove this trhead
One more question
How do i remove this trhead
Related
Just tried my old SPB Backup 1.6 and the latest 2.0. Both software will hang when the backup initiates.
Is anyone else facing this problem?
yeah i had the same problem last week
it crashed 3 times in a row @ the startup screen and reset wouldnt work
what can i do?!
exCluSive1 said:
yeah i had the same problem last week
it crashed 3 times in a row @ the startup screen and reset wouldnt work
what can i do?!
Click to expand...
Click to collapse
Dont restore the databases.
i used SPB Backup 1.6.1 and HTC WM 6.1..all fine, nothing happen, and still using it til now..
I tried to backup running from my TyTN II with Leo and Hyperdragon IIm latest rom but it will freeze. When I tried running from desktop, I managed to backup for Hyperdragon IIm but have not tried on Leo's latest Diamond V6 rom.
When I had the latest WWE shipping rom, it runs without any problem. Could even do a restore.
I havne't had any issue with SPB's latest backup software. ROM in sig but I guess it's a 6.1 hybrid
no problems here with the new 2.0 version.
i'm using the official 6.1 htc rom and everything works like it should be
Use Sprite Backup instead.
Hello,
I also had problems with my official HTC WM6.1 ROM, someone has reported the problem in the SPB Forum, so it's seems to be an issue with WM6.1..
I found the Sprite Backup 6.2 Program in e-Club HTC, installed and It works quite well...
See this post:
http://forum.xda-developers.com/showthread.php?t=399628
Osc
I had a problem restoring a backup I created on UDK WM6.1 to L26 WM6.1. It would crash when I tried to do the restore.
I've found that if I use the latest SPB Backup 2.0 I can now do the restore.
I load it up
choose 'restore backup'
choose your backup .exe file
customise the restore
go to 'options'
untick 'stop processes' and 'create log files'
This may help when creating backups. I think the 'stop processes' bit is the key. I think SPB backup is trying to stop some system processes and can't so hangs.
Hope this helps.
zard said:
I tried to backup running from my TyTN II with Leo and Hyperdragon IIm latest rom but it will freeze. When I tried running from desktop, I managed to backup for Hyperdragon IIm but have not tried on Leo's latest Diamond V6 rom.
When I had the latest WWE shipping rom, it runs without any problem. Could even do a restore.
Click to expand...
Click to collapse
I was haved the same problem. After try many, many software backup the only one work fine was Resco backup v 1.20 (but isn't best than SPB Backup).
I have the same problem.What can I do?
Same problem here: Spb freezes 90% of times during backup.
re:
For me, version 2.0 working great...
Oh, so I'm not the only one...
I already signalled this in Leo's V6 thread (I believe, the guy is spewing new ROMs faster than I can press F5...); my SPB Bkp 1.6.3 PL (don't remember the exact build #) hangs right after pressing the button. I was told that unchecking "close all processes" should do the trick as the program apparently tries to close itself... Duh. If it does that, it's dumber than a box of hammers.
However, I could not be arsed because I have tried Resco Backup 1.20 since and found that it worked great. Very fast, too. WAY faster than SPB 1.6.
Resco may not be as sexy as the new SPB 2.0, but hey, it's a backup program for crying out loud, it can have a text console for all I care Besides, it's really quite nice and easy on the eyes.
hi all,
I'm just getting bored with my WinMo6.0 rom, wanna try some of the exciting WinMo6.1 roms out there, but I don't want to lose any SMS and contacts.
Will the "PIM Backup 2.8" help me backup all my SMS and contacts from my current WinMo6.0 rom and restore them back to the new WinMo6.1 rom (I think i will try the ROMeOS v4.5.3 first)?
thanks in advance!
Yes my friend, it will
it will but if you have so much messages it WON'T
or rather it will but it will get stucked because...
in wm 6 its normal mode and in wm 6.1 its Threaded
so the solution is to disable threaded mode in wm 6.1 before you restore
BTW your phone will run slow after the restore so soft reset.. not by stylus clicks but by powering off device and reboot
Svein10 said:
Yes my friend, it will
Click to expand...
Click to collapse
Thanks for your great solution, it will help me alot my friend. ^_^
Also, thanks for ur quick reply, Svein10
Hello!
I have a Tmobile MDA Vario 3 and the following problem:
I used my phone normally every day, and one day no ringtones are working... I can hear them choose one of the sounds, but no sound if somebody rings me...
what can it be? I dont wanna make a hardreset, because many programs on it and i dont wanna lose them...
I did a hardreset and used before sprite backup, i tested the ringtone and IT WORKS, now i put back my backup and no ringtones working now again, how can i find the mistake in the system? Can i look into the registry like normal windows too?
in another forum i saw someone means it can be the divx player, i deinstalled it, but nothings better...
I NEED HELP... what can i do?
Regards
Can't you just put the programs back on there? It's really not that hard.
ChumleyEX said:
Can't you just put the programs back on there? It's really not that hard.
Click to expand...
Click to collapse
Its too much for me...
Its an tmobile device and i putted manually the o2 internet settings in there nobody knows whats the defect on there?
Regards
I could flash and setup my Tilt in no time flat.
Ok, i will do a hardreset, but is there a ROM for the Vario 3 so that i have an original HTC ROM?
And can i flash the phone then to WM 6.5?
Do you have any links for me?
are you on a flashed non OEM rom?
I am on an original tmobile rom, and i i have to reset i wanna change to another rom like windows mobile 6.5, i have to change rom to a htc rom 6.1 and then i have to go to 6.5 right? i wanna put away tmobile settings on hardreset!
Well if you hard reset it will put the oem rom on it. Then you follow the instructions to be able to flash roms on it. Until you flash a rom on it, every time you hard reset it the factory rom will install.
Can you give me a link where i find a description what to do for this?
I wanna flash the rom to HTC WM 6.1 original, and after this i wanna install 6.5 is this the right way??
[Resources] Flashing Your First Kaiser Rom (For Noobs)
No need for interim flashes after hard-spl you can flash a 6.5 make sure you read about Radio update
Maybe you have installed some softwares. let check recent installed softs and uninstall them, then restart. No need to use other rom if you like it
If it still does not work, do hard-reset.
Goodluck
I've tried this Rom. its perfect, it works good and fast.
but my problem with this is:
when i make soft reset my phone starts at the Hard reset screen. and i have to reinstall my softwares again.
is there and solution by this problem???
Tnx.
Try to flash some other ROM.
hi again,
I've already found the problem.
I reinstall the ROM again, but this time i did this instruction:
- DO PULL BATTERY before flashing this rom
- Do HARDRESET after flashing this rom
- Do Softreset after restoring your contacts, etc and settings. Twice softreset will be better!
and now each time i make a soft reset there is no any problem.
i love this rom, many tnx to its author.
saieed91 said:
hi again,
I've already found the problem.
I reinstall the ROM again, but this time i did this instruction:
- DO PULL BATTERY before flashing this rom
- Do HARDRESET after flashing this rom
- Do Softreset after restoring your contacts, etc and settings. Twice softreset will be better!
and now each time i make a soft reset there is no any problem.
i love this rom, many tnx to its author.
Click to expand...
Click to collapse
i had the same problem....Try flashing the stock ROM it works
How to get x1 6.5.5 rom...
hi guys ...do some one know how i can Get 6.5.5..Rom for my sonyericsson x1..
i HAVE BEEN SEARCHING FOR DAYS.....PLEASE HELP!!!!
Hi there
Hi there
By searching through the internet you can find lots of ROMs for your X1, but the thing that is very important is; the Rom that you choose should be reliable, faster than any other previous ROMs and known.
If you are interested to change your x1 rom 1st you need to unlock your x1. You can find the unlock tools and its instruction on the forum. And 2nd you can copy the topic title and paste it on the google to find the download links.
By the way, I recommend you this Rom it's very very great.
XPERIA X1 ROM 826X Windows Phone 6.5.5 build 23518 (New UI)
Well it was a terrible mistake i made and i was quite sure this time it would have gone miles away( my kaiser)
i flashed my Kaiser for over 11 times in past one week
every time i flash with Ahmed Fakiry rom and tried to install different cabs ( downloaded from different sources, mostly xda-developers) my phone went on sleep due to bad factors( like once i by mistake installed QVGA themes of SPB 3.5x) to my Kaiser and in result its lost
then again same ahmed fakery rom flashed and i uploaded a battery saving tweak but same problem with flashed rom, gone and stuck with windows image after boot( no hard or soft reset seems to be working)
Well Lastly today when my phone was perfectly working, having 6.5 cooked rom Ahmed Fakiry with SPB shell and all basic required cabs, i was using opera 10. through wifi, surfing XDA-Developers, i saw iphones today and i hit the cab button and with in a whle it was on board
right after it was installed, working perfectly, i click settings, then my kaiser was hang, battery removed, soft reset, memory card removed, hard reset using soft buttons and stylus, etc, nothing seems to be working fine with my phone
at last again xda-developers forum....
so finally i re flashed my phone with boot loader mode and usb, same FAKIRY ROM, but again the same problem was commin.....my question here is why it happened again and again( i flashed it three times using boot loader, whereas i re flashed my phone using boot loader with Dutty official 6.1 rom and its working fine and phone was alive again
Can some one help me in this matter that if there is a crush on your cooked rom with such kind of issues, why this problem is occurring again and again and if now i wish to flash my rom again using sync( phone is currently having dutty 6.1 5.2.19716 UC to Ahmed Fakiry roms( 6.5)ahmedfikry wm6.5 23569 Tilt 3D UC light rom V3.....?
Please post your valuable comments and guide me in this regards and others like me....appreciated your response
EDIT:
WELL i again flashed and upgraded to ahmed Fakiry rom (ahmedfikry wm6.5 23569 Tilt 3D UC light rom V3) from old dutty 6.1
now its working fine
but waiting for advise from experts....