Hi all,
I have got Miri WM 6.5 ROM on my HTC Touch HD, and I am experiencing a few problems here.
Firstly, the phone keypad is messing up, I have a picture attached to show this, and is very hard to make calls, and cannot make calls properly.
Secondly, when someone rings me, the menu is really strange, and a lot of things are missed out, which all is really confusing me.
Everything else, e.g the menu, is working absoloutely fine.
Anyone know a way to fix this problem?
Also, have a look at the picture attachment on this post, the battery bar at the top is strange, anyone know how to fix that?
Really appreciate it.
Hi might i suggest posting on the thread in question where you got the rom from, others might be able to assist you there, I have not tried this rom myself but if you havent already tried, maybe a hard reset may rectify these problems.
n17eel said:
Hi all,
I have got Miri WM 6.5 ROM on my HTC Touch HD, and I am experiencing a few problems here.
Firstly, the phone keypad is messing up, I have a picture attached to show this, and is very hard to make calls, and cannot make calls properly.
Secondly, when someone rings me, the menu is really strange, and a lot of things are missed out, which all is really confusing me.
Everything else, e.g the menu, is working absoloutely fine.
Anyone know a way to fix this problem?
Also, have a look at the picture attachment on this post, the battery bar at the top is strange, anyone know how to fix that?
Really appreciate it.
Click to expand...
Click to collapse
try a hard reset and do not install any cabs..
if still persists then reflash and again hrd reset preferably 2 times..
jus a note - do not install any dialers or ull mess it up agn..
Related
Hi I've looked around and wasn't able to find an answer.
I've had the Diamond for about a week and it seems to freeze on me atleast a couple times a day. The only way i can get it back is if i take off the battery cover and do a soft reset from there.
If someone tell me where i can find the answer to this fix or even if someone can tell me how to fix this problem i would really appreciate it.
Also would this problem stop if i flashed it with a new rom? and if yes and someone knows which rom is the best for the Telus network, I would greatly appreciate it.
Thanks for any help at all guys!
Hi, have you noticed any particular patterns for the crashing? Any particular software being used?
By the way, "brick" tends to mean permanently dead, for example after a bad flash:
http://en.wikipedia.org/wiki/Brick_(electronics)
Well actually nothing in particular and plus i have lots of ram to spare as well when it does this. Like anywhere from 120mb to 150mb free ram.
not sure if anyone else is having this problem, i mainly hate the freezing because of the soft reset button being under the battery cover, was so much easier on my old titan
izuzu said:
Hi I've looked around and wasn't able to find an answer.
I've had the Diamond for about a week and it seems to freeze on me atleast a couple times a day. The only way i can get it back is if i take off the battery cover and do a soft reset from there.
If someone tell me where i can find the answer to this fix or even if someone can tell me how to fix this problem i would really appreciate it.
Also would this problem stop if i flashed it with a new rom? and if yes and someone knows which rom is the best for the Telus network, I would greatly appreciate it.
Thanks for any help at all guys!
Click to expand...
Click to collapse
i'd try a hard reset. i'm assuming you know what the entails. usually fixes strange issues for me when a solution is not immediately available. but someone more brainy will have a solution for you later. i'm not at all familiar with cdma diamonds.
izuzu said:
Hi I've looked around and wasn't able to find an answer.
I've had the Diamond for about a week and it seems to freeze on me atleast a couple times a day. The only way i can get it back is if i take off the battery cover and do a soft reset from there.
If someone tell me where i can find the answer to this fix or even if someone can tell me how to fix this problem i would really appreciate it.
Also would this problem stop if i flashed it with a new rom? and if yes and someone knows which rom is the best for the Telus network, I would greatly appreciate it.
Thanks for any help at all guys!
Click to expand...
Click to collapse
When I first got my Telus Diamond it was crap, the interface was slow, tf3d was unreliable, playing mp3's was painful to say the least and the battery life was horrendous. I later flashed to a custom ROM and will never go back. Custom ROMS will improve everything from the performance to the freezing and even improve your battery life. As for which ROM I would suggest. Right now I'm on Juicy 3.2 but I have played around with a number of others including MightyStableRom or MSR, last I tried was 2.2 or 2.3 can't remember. Really it is a personal preference whose ROM you go with. The two I named you can't go wrong with. Once you try it though trust me you will be hooked. I've flashed my Diamond like 20+ times already, so much fun and great improvements. Let us know if you have anymore questions!
Thanks a lot guys!
Could anyone point me to a thread where it tell me how to flash my CDMA diamond step by step?
I'm willing to try anything because i love the phone but hate the freezing and the crappy Batt. life.
Hey majorassface, since your with telus and you have flashed your phone numerous times now, do you know where i can download all the telus stock stuff like the spl, radio rom, & stock rom?
So if for any reason i need to take it back to telus for repairs i can flash it back.
Thanks again!
Hi guys,
I'm quite newbie... I've just moved from SPV c600 to DIAMOND. I've one problem that really makes me mad. At first I must tell that I've tried everything hard reset , than checking if any apps is causing that one by one-with no result. Occasionally I just can't pick up/refuse a calls with HW buttons. I use S2U2(installed yesterday), but this problem I had even before i installed that app. Does anybody of you experienced such an issue? Anybody knows the answer how to fix it? Thanks in advance
Same thing happens to me! It is like HW buttons work whenever they want but not all the time. If you install AEButton Plus you can remap HW buttons, but again the same thing will happen. The changes will work sometimes but not always.
I have a similar problem. Can you answer with soft buttons? Hoping some solution ideas will appear here or in that thread.
Same issue here.
I have added my experience to the above listed thread, and also opened a thread at Howard Forums.
http://www.howardforums.com/showthread.php?p=12088702#post12088702
This has become extremely frustrating.
Sprint has not been very receptive to this either.
what works for me is to lock & unlock the screen.
unless it case is related to another problem which i have experience before as well. But this has gone away since i loaded a different rom from the original htc.
*edit
this should fix it
http://forum.xda-developers.com/showthread.php?t=451647
I go skiing tomorrw so i need to try and get this problem fixed asap. I recently installed PDAcorner V19 and i adore the rom to bits. The only problem is randomly the sound will cut off. Calls are silent, txt messages/calls dont ring and adjusting the sound has no effect. It takes a soft reset in order to cure it, then after a few hours it goes back to being silent. I originally did a hard reset but it didnt seem to have any effect on it. I am on T-mobile, in the UK using radio 17.09.19.
Does anyone have any idea what could bec causing this? I pm'd the creater of this ROM but havnt heard back yet and i am really hoping to get it fixed before i go abroad. Does anyone have any advice?
thanks guys
(i have searched & googled as much as i can, but didnt find anything of use)
edit; excuse the typo in the subject, if i mod could adjust it id be gratefull!
You can try to flash a different radio to see if that helps or a different rom. I have that rom and do not think that anyone else is have those sorts of problems.
I had the same problem a while back and tried several different roms and radios. Nothing worked. I think it has to do with Voice Command and or bluetooth. Then all of a sudden it went away. Here is the thread discussing it, to see if it sounds like your problem.
http://forum.xda-developers.com/showthread.php?t=438457
thanks for your help Denco, ill have a look through and see if it helps!
Hi guys, i'm using on my x1 windows mobile 6.5 rom since first beta. I have tried alla kind of rom. As far as i know i have always had a problem that create me some trouble. The x1 hardware keyboard seems laggy and very slow. Also FN key take a lot of pressures to activate. Someone else is having the same problem? Just to know if it's mine broken. I don't want to go back to 6.1 to try.
Thanks
Luca
l0rdsheva said:
Hi guys, i'm using on my x1 windows mobile 6.5 rom since first beta. I have tried alla kind of rom. As far as i know i have always had a problem that create me some trouble. The x1 hardware keyboard seems laggy and very slow. Also FN key take a lot of pressures to activate. Someone else is having the same problem? Just to know if it's mine broken. I don't want to go back to 6.1 to try.
Thanks
Luca
Click to expand...
Click to collapse
if U want to have helps, U shuold tell us what's rom are U using or U want to use, so people, who have had experiences with that ROM will tell U how...
Goodluck
I've had a similar issue to this too since using the 6.5 roms, also along with the lag it double inputs the character selected sometimes. If anyone knows a fix fort his would be greatly appreciated.
Thanks
Is it laggy and slow in every program? For me it works very well. Only thing is my m-key is kinda broken, not a software issue i figure though.
zannyboy said:
I've had a similar issue to this too since using the 6.5 roms, also along with the lag it double inputs the character selected sometimes. If anyone knows a fix fort his would be greatly appreciated.
Thanks
Click to expand...
Click to collapse
That's how my m-key is broken, one in ten times it types two Ms on one press. But it isn't like that on any other character.
kanchigo said:
if U want to have helps, U shuold tell us what's rom are U using or U want to use, so people, who have had experiences with that ROM will tell U how...
Goodluck
Click to expand...
Click to collapse
it's not located in a specific rom... every 6.5 rom create the problem.
@jablko yes, every program...
zannyboy said:
I've had a similar issue to this too since using the 6.5 roms, also along with the lag it double inputs the character selected sometimes. If anyone knows a fix fort his would be greatly appreciated.
Thanks
Click to expand...
Click to collapse
exactly the same to me.
l0rdsheva said:
exactly the same to me.
Click to expand...
Click to collapse
same here, altough I had the same problem at my original WM 6.1
Same issue
l0rdsheva said:
Hi guys, i'm using on my x1 windows mobile 6.5 rom since first beta. I have tried alla kind of rom. As far as i know i have always had a problem that create me some trouble. The x1 hardware keyboard seems laggy and very slow. Also FN key take a lot of pressures to activate. Someone else is having the same problem? Just to know if it's mine broken. I don't want to go back to 6.1 to try.
Thanks
Luca
Click to expand...
Click to collapse
I have experienced same issues like you did. The Fn key works only when I put lot of pressure on it (didn't succeed to determine which is the most suitable position) so, I've been forced to find other alternatives (soft keyboards). But, what's important is to find out if this is a hardware problem or is simply related to the new ROM installments which I play with...
Any opinion/suggestion is more then welcome...
Thanks
It's not a wm 6.5 related problem... there're tons of guys having this problem, and soon they're going to increase, cause it seems to get worse with time...
my keyboard has reached an unusable state, and the left half of the keyboard type twice or nothing.
The first thing you can try is to longer the time for input replication... if it doesn't work, then send it to SE, and hope to receive it back in a little time
I'm waiting to find a good alternative to X1, then send it to assistance, and when it comes back sell it... never buying SE products anymore
searching with google get many results... this is the first:
http://forum.xda-developers.com/showthread.php?t=489331
oh let me tell you something real that is happening.
1.keyboard is crap if u dont use the buttons daily ,you will have this problem(i have it too)
2. same as my camera button( i press half way to auto focus and then press it fully to take a picture. but now it auto focus and when i press fully,the camera will auto focus again and shoot the pictures )
i dunno what is wrong with X1 ,but htc has make a bull**** things for SE.(happy that SE decided to leave them).
ok so seem to be an hardware problem; i'll dismount mine x1 to see if there's dust or something else under the keyboard.
l0rdsheva said:
ok so seem to be an hardware problem; i'll dismount mine x1 to see if there's dust or something else under the keyboard.
Click to expand...
Click to collapse
Now that's hardcore!
Jablko said:
Now that's hardcore!
Click to expand...
Click to collapse
no problem, it's already out of warranty and if it goes wrong is time to buy another device!
crava said:
It's not a wm 6.5 related problem... there're tons of guys having this problem, and soon they're going to increase, cause it seems to get worse with time...
my keyboard has reached an unusable state, and the left half of the keyboard type twice or nothing.
The first thing you can try is to longer the time for input replication... if it doesn't work, then send it to SE, and hope to receive it back in a little time
I'm waiting to find a good alternative to X1, then send it to assistance, and when it comes back sell it... never buying SE products anymore
searching with google get many results... this is the first:
http://forum.xda-developers.com/showthread.php?t=489331
Click to expand...
Click to collapse
I reached to the same conclusion like you did. Seems like most of the SE X1 keyboards have problems, as well like the battery life (btw, last night, in stand-by mode, my X1 battery drained out completely without having any process/program running)...
Speaking about SE X1 in general, yes could be taken as a kind of failure but we don't have to forget is made by HTC. So, they could be blamed as well for this lack of success!
Or maybe there was also a sabotage around, who knows?
time to get X2
Hey guys, i looked all over for an answer before posting this here , but no luck.
This is what´s happening, i have a kaiser tytn II which i had problems, was going extremely slow, i removed some apps that i had installed including tomtom and same thing, so i thought about the soft/hard reset, i did it, and now......its crazy, i can´t use the touch screen, example : i want to enter my pin code and when i press number 6, it only presses number 2. its like the whole thing is messed up and the theme is really ugly, grey color . I thought maybe i could install a new firmware with a nicer looking and might solve the issue, but i don´t know where to get it and how to install it. Could someone help me how on some tips please ?
Thank you so much in advance
luisdesigns said:
Hey guys, i looked all over for an answer before posting this here , but no luck.
This is what´s happening, i have a kaiser tytn II which i had problems, was going extremely slow, i removed some apps that i had installed including tomtom and same thing, so i thought about the soft/hard reset, i did it, and now......its crazy, i can´t use the touch screen, example : i want to enter my pin code and when i press number 6, it only presses number 2. its like the whole thing is messed up and the theme is really ugly, grey color . I thought maybe i could install a new firmware with a nicer looking and might solve the issue, but i don´t know where to get it and how to install it. Could someone help me how on some tips please ?
Thank you so much in advance
Click to expand...
Click to collapse
Maybe if you start sharing what rom are U using My advice is that you definitely should flash another rom or reflash your stock rom to solve the issues you are experiencing. Please read the sticky of how to do it
you can reset it to factory settings (the ROM you last flashed that is) by this method:
press and hold the two upper hardware keys next to your call end and call button. While pressing and holding them do a soft reset. A white screen with blue text should come up. Press the green call button and wait for it to reach the screen after the percentage screen. Then press the green call button again and it will be like it first was out of the box (or when you flashed a ROM).
Kaiser tytn II
The soft reset that exactly what i did and that´s what screwed up my kaiser , i am going to re-flash it , i will look on how to do it and will have a try.
ok, one slight problem, i have a macbook all i find is for pc
luisdesigns said:
ok, one slight problem, i have a macbook all i find is for pc
Click to expand...
Click to collapse
You'll either have to create a partition and install windows on it or flash via sd card. Link here to get you started:
http://forum.xda-developers.com/showthread.php?t=433835
thank you so much, i will try it this evening from my pc hope it fixes the issue. Will let you know