Problem with Caller ID and contact list. - Touch Diamond2, Pure Q&A, Help & Troubleshooting

Hi
I have problem with Topaz. When I save in contact - mobile No with country code (egz. +44) and try to call from other phone my Topaz don’t recognize number and is showing as a number not contact which was saved.
If I save in contact mobile No as 0xxxxxxxx without country code everything works ok it will show. What is wrong? Is there any setup or patch or anything what I can do with that? I’m travelling quite often so I store numbers with country code.
(Sorry for English)

I do not have this problem, but afaik there is an option on how many digits the number is recognized.

Set your caller ID to identify according to greater or lesser number of digits.
Otherwise, it may be that you have duplicate entries. This would also affect Caller ID.

where is the setting to change the number of digits - I appear to only have options for all contacts, no or address book ...........but no digit mask

I'm having the same issue.....
I've tried to manually add a number. With/without all/some prefixes.
Using + and 00.
I've checked to duplicates.
I've emptied by phonebook and SIM.
I got someone to call me. Saved their number from the call.
I've tried, say, +353868033333 and +3530868033333 and 0868033333 and 868033333 and replaced the + with a Zero.
I've set my Caller ID from 12 down to 2 and still nothing.
I do note something interesting.
I had ONE phone number work so far.
And I've yet to discover why.
I've placed a call with HTC and they are aware of the issue for only a week so far it seems but I think this has been an issue even from previous models.
Anyone got any others ideas? I'm going to try the hard reset and allowing it to import one number from the SIM card. And then I'll sync my full phonebook and see. But I'm holding off a few days to see if HTC will wake up and smell the coffee.

starfish_001!!!
starfish_001,
You need to get a Regedit tool, such as "PHM Regedit" and go to....
HKEY_CURRENT_USER \ ControlPanel \ Phone \
There is a key in there called "CallIDMatch".
You will have to change the range from about 12 down to 2 depending on your phone numbers etc. A soft reset is needed after each change to test.
BUT this has not solved my problem yet. It has for some it seems.
- Geoff

geofflyons said:
starfish_001,
You need to get a Regedit tool, such as "PHM Regedit" and go to....
HKEY_CURRENT_USER \ ControlPanel \ Phone \
There is a key in there called "CallIDMatch".
You will have to change the range from about 12 down to 2 depending on your phone numbers etc. A soft reset is needed after each change to test.
BUT this has not solved my problem yet. It has for some it seems.
- Geoff
Click to expand...
Click to collapse
Excellent - I will give this a go

Ummm... there might be some trouble...
Let me try to help...
Normal number should consist of:
+ (international prefix)
xxx (country code)
xxx (area code/provider prefix)
xxx xxxx (phone number)
So let's use some reverse engineering:
- are ALL phone numbers in your country lenght 7 digits?
- is area code always 3 digits?
- how long is your country code?
For example, post #5:
"+353868033333 and +3530868033333 and 0868033333 and 868033333"
phone number: 8033333
area code: 086
country code: 353
Catch 22: you HAVE TO ommit 0 from area code, so it becomes 86 and correct form becomes first one, +353 86 8033333.
So recognition lenght should be: 7 + 2 + 3 = 12. Right? Not always.
Normally, math goes like this: (shortest possible phone number lenght in your country) + (shortest possible area code lenght without zero) + (country code)
In my country, it looks like this: 6 + 1 + 3 = 10
Example: +385 1 999999
But, there could be: +385 51 999999
and: +385 91 999999
If you go from lenght 2 up, you notice that till lenght 8 those 3 numbers are same for caller ID!
Now, try to play that with you country's number format... not to mention USA, where country code is 1!
Sorry if all of this was already obvious...

Bodisson,
Thanks for that expansion of the issue.
I'm going to give it another go.
Unfortunately the phone numbers here in Ireland can be in a range of:
+363 86 8033333 to +353 1 55555 so perhaps the Irish will be stuck with a HTC phone that will only recognise a handful of phone numbers.
I tried the CallerID with 12 and lower already. I might have to go right back to the basics on this one and start with one phone number.
I've read in other threads that people had to do a hard reset, have some numbers on their sim and then allow the wizard to copy those numbers across. You can then add the full set of numbers.
Thanks for your calculations. I'll give it one more shot before I do a hard reset. If only HTC would roll out WM6.5 so I can try that first. I'm a little put off by the manual upgrades.
Regards,
Geoff

I am having this problem after installing a Translation software in my device, where it automatically installed other languages.... i tried un installing it, but the problem persist, i have to hard rest i think !!

Related

XDA IIi Missing clock at the top right

Hi,
I'm upgrading my XDA IIi German ROM to English ROM from Pug with radio version 1.04.00. Right now, the clock at the top right doesn't come up. Do anyone have the same problem like this?
How to display the clock at the top right?
Please help.
Thanks
Missing clock
Yes, sad to say - my wife's machine is exactly the same. It appears on the today screen, but not the menu bar at the top. Sorry no answers, though my guess is that it probably appears somewhere in the registry.
Anyone?
I've upgrade only the Radio to ver 1.04 from Pug but not the external rom since the Ext Rom will overright all my external and country setting. With this i got all my original country setting and interface im happy with only upgrade my Radio.
The same (clock disappearing ) happened back in the days on my Magician, to solve it do the following: get yourself a registry editor (e.g. phm regedit, freeware on www.phm.lu) and go to the following key:
hklm\software\microsoft\shell
- add dword called "TBOpt" and give it value 3.. soft reset.
0 = no time or date
1 = time
2 = date
3 = both
Thanks Koskie,
I knew it must be a registry setting. I'll try it tonight.
Regards
David
Thanks Koskie
I try to open the website but it isn't working. I attach the software here. It works great.
Thanks
Koksie said:
The same (clock disappearing ) happened back in the days on my Magician, to solve it do the following: get yourself a registry editor (e.g. phm regedit, freeware on www.phm.lu) and go to the following key:
hklm\software\microsoft\shell
- add dword called "TBOpt" and give it value 3.. soft reset.
0 = no time or date
1 = time
2 = date
3 = both
Click to expand...
Click to collapse
Just tried that on my 2i (O2 UK, not that the provider probably matters that much), set it to 3 (I've tried hexadecimal and decimal-type DWORD), soft resetted, and it's still not showing up on the top bar.
It works for me. Using O2 UK ROM.
Thanks Koksie. Great Advice!
Cheers!
christopherwoods said:
Koksie said:
The same (clock disappearing ) happened back in the days on my Magician, to solve it do the following: get yourself a registry editor (e.g. phm regedit, freeware on www.phm.lu) and go to the following key:
hklm\software\microsoft\shell
- add dword called "TBOpt" and give it value 3.. soft reset.
0 = no time or date
1 = time
2 = date
3 = both
Click to expand...
Click to collapse
Just tried that on my 2i (O2 UK, not that the provider probably matters that much), set it to 3 (I've tried hexadecimal and decimal-type DWORD), soft resetted, and it's still not showing up on the top bar.
Click to expand...
Click to collapse
Are you running SPB Pocket Plus?
Koksie said:
hklm\software\microsoft\shell
- add dword called "TBOpt" and give it value 3.. soft reset.
0 = no time or date
1 = time
2 = date
3 = both
Click to expand...
Click to collapse
Hello,
it works on my Wizzard (xda mini s) but the date is in bold therefore the last digit is not completely visible. Any idea how I could change the date to normal text style?
Thanks,
Klaus
This is all done inside HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\ - use PHM Registry Editor (freeware) or another reg editor to do all of this (Tweak2k2 will also do it, apparently). Remember: registry editing can mess up your phone if you do it wrong!
You may already have an entry called TBOpt, and it might just read "0" or "1" - delete it, and start over. The TBOpt entry should be set up as a BINARY string. I did this, and chose a number - 13 - and set the value to
13 00 00 00
This resulted in both the time and the date being visible. This was a start, but I needed more...
I changed the value to 01 00 00 00, rebooted, and bingo: only the clock appears.
02 00 00 00 shows only the date.
03 00 00 00 shows both, like 13 00 00 00, except where with 13 the time and date were centre-aligned, the time and date are now left-aligned.
04: nothing.
05: shows the time, in what looks to be a left-aligned manner, in bold.
06: shows the date, dd/mm/yy format.
07: date and time, regular font weight (i.e. not bold), date in dd/mm/yy and time in 24hr.
08: nothing.
...
I got bored by this point, as every new choice requires a soft reboot and a 30 second wait while the device powers up. If I had a genuine copy of Windows, I'd download the emulator and just try it with that from the MS web site, but... well... The last time "I" owned a legit copy of Windows, I was about 7, and my Dad bought me a computer.
Some options seem to do more than most, I'd hazard a guess and say that some of the 'options' tally with the various ways you can choose to have long and short times and dates shown by the system in the Regional Settings control panel applet. I love being able to switch between analogue and digital time display! (tap and hold on the time, it'll only work if you only have the time shown, otherwise it'll show just the day part of today's date).
Going back to the legal-copies-of-Windows-thing finally, I suppose technically I own two legal licenses for two unique copies of Windows Mobile 2003 SE, but that's another story (XDA number 1 locking up on boot, that was a clever error).
Hope this post helped.
For some reason my clock has changed to an analog clock. Its really ccrap cos you cant tell the time! how do i switch it back to digital again?
THanks for the help!
Thanks, just worked it out...
And for those who don't know, you tap and hold with the stylus on the clock to bring up the Analogue / Digital choice menu.
Also, might as well just note for the record that the reason the clock disappears on the XDA 2i is because of one of the customisation CABs O2 have put in their Extended ROM. If you do a Corporate Install (with the 0506 code, as I did the second time round) it doesn't install any of the O2 interface, nor does it install any of the customisation CABs - so bingo, you have a (pretty much) standard WM2003SE installation.
I used the O2 Contract GPRS and GSM settings CAB file from this forum (supplied by Pug) to just make sure that my SMS and GPRS settings were correct, but aside from that my installation was vanilla, thanks to the Corporate install. Also meant I had a clock on the top, which was a revelation for me then.
Just stating this because when I was first searching for the solution to this problem, I couldn't find any information as to why it was happening, or how to fix it... Just chanced upon it whilst doing my own Corp install so now it's set in stone for future newbies to read.

Dialpad and multiple phone numbers in one record (home, mobile, office)

Hello
I store my address data in PI 2007 and use the fields for different telefon numbers like Home, Office and Mobile (actual all data comes per sync from Lotus Notes).
But when I try to use the smart dialing option of the phone pad and type the letters of the name like F R E E C A L L
I get only offered one number per entry ..like Freecall mobil , but not the other 2 numbers at all .. What is wrong ?
Without having the other numbers to select the smart dialing is quite useless.
On my MDA II I had a third part dialer phoneplus how could access the 3 numbers in a selection dialogue with no problem .
any advice ?
Freecall
I'm not sure if it's the same on the Kaiser, but on the Universal there would be a little W, M or H next to the contact to show Work, Mobile or Home. Pressing left or right on the direction pad cycles between the available numbers.
Noiz said:
I'm not sure if it's the same on the Kaiser, but on the Universal there would be a little W, M or H next to the contact to show Work, Mobile or Home. Pressing left or right on the direction pad cycles between the available numbers.
Click to expand...
Click to collapse
That is exactly how it works on the TyTN II
super .. that was the missing hint !!!
And with sunnysoft now even my ATT calling card setup works fully automatically
- Local Access number
- Destination number from Kaiser phone book
- ATT code
- ATT PIN
eh voila
the kaiser becomes more and more the DREAM MASCHINE for me !
(not to hard moving up from a WM 2003 MDA II I need to admit )

[APP] DTMF DIALER -Download - V2.5 (calling card functions)

Hi guys... I recently noticed that 99% of my contacts are on my cell phone, so Lazy as I am, well I normally just grab the phone and dial... then I get into Cell Phone charges.
well where I live cell phone charges and regular phone charges are way different, I always have to pay a lot more for the Cellphone calls.
So I wanted an easy way to use my contacts right on my Cell Phone to my regular phone, then I made DTMF Dialer.
it's a very simple program, it will list your contacts, then when you select one, you will get 3 buttons filled with the 3 main phone numbers of that person:
Cell
Home
Buissness
you select the number you want to dial, then it will fill itself on a box, after
that you just grab your regular phone, "open it" until you get a dial tone, move the Cell near the regular phone microphone and click dial.
the cell phone then will emit the DTMF tones to dial the phone number you requested, that's it.
I made this software like 3 weeks ago, and so far I have saved some $ using the regular phone line, so with all the help you guys at XDA developers have given me I decided to release it.
I normally code in delphi, so C# is not my strongest point, and yes the program might look a bit lame, plain and simple, basically I made it for my personal use, but if anyone has ideas on how to make it better
please write to me at chuby .A..T.. internettico .dot. com
Also, I know that at least in my case that I have a gazillion contacts it takes a while to load, maybe there's something in the NET CF api to load all contacts faster or to query them different than what I did, but as I said it works.
as usual everyone likes to see a screenshot even if it is lame !
so here it is:
V2.1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
V2.5
now if anyone finds it usefull, drop me even 1$ to my paypal account here:
chuby .A..T.. internettico .dot. com
anything will be apprecialoved !!!
tyvm !
V1.0
First Release Send bug reports to the email listed above or PM me !
V2.0
Took on the request of the guys here on XDA and changed this:
-NOW the system loads VERY VERY fast ! woot... I am using another class to open the contacts !
-DTMF tones are very VERY fast now also ... tested and works !
-Hopefully I fixed the international dial problems
V2.1
I changed the software so now it can take a prefix, if it finds a prefix, it dials it automatically, with no prefix, it does not gets dialed ( duh )
V2.5
First of all I found a bug... the business phone was not being loaded correclty ( fixed )
added calling card capabilities ( via a script )
functions:
d=selected phone number
c=calling card
p=pause 0.5s
x=prefix
( if you check the calling card button, the normal dial will be overriden by
the script )
Kenlester: please specify where to add the pause or what do you mean by pause, so I can implement it tyvm
PD. you need net CF 3.5 to use this... (I got rid of the CF 3.5 parts so it now can be compiled with CF 2.0, but I made a big mess while compiling so I'm gonna try to see if I can release a CF 2.0 asap )
Great App
There are 101 uses for a DTMF Dialer. The tones need to be about 10x faster. Also, needs support for pause. (p=3 sec)
Hmm sounds cool!
It seems to screw up with international format (+xx) numbers though, and yes a bit slow.
thx
Hi, I will fix the international format... and I will add a user defined pause, so it can do things faster or slower, then release another version, on the space besides the dial tone you can write any number manually, just in case I left that one open, I slept on it and I think that other software query the names, then the numbers on request and I query EVERYTHING, I'll look how to change that on Net Cf... I guess it has to be possible.
TYVM for the input !
Interesting idea, is there any way to use it with an earlier CF version than 3.5 ?
Chuby007 - great work... any way to add a 'add before dilaing' type field? In my case I need to dial '91' to get an outside line on my landline (obviously not on my cell). I know some people just need '1'. Thanks again
yes
yes I can add a prefix to dial .. or add a before dialing as you say no problem I'll add it and release it for V2.1 I guess tomorrow !
tyvm I hope you enjoy it, it has already saved me some money on my cell bill WOOT !
you're the man - thanks...looking forward to it
Very good program, but too bad, I don't seem to get it to work wigh my TyTN II. Although I manage to get my house phone to dial, it didn't get through and happenedtto 1land line and 1 mobile number. Is it because thd sounds were too fast?
chuby007 said:
PD. you need net CF 3.5 to use this... (I got rid of the CF 3.5 parts so it now can be compiled with CF 2.0, but I made a big mess while compiling so I'm gonna try to see if I can release a CF 2.0 asap )
Click to expand...
Click to collapse
This would be great, thanks.
How about using this program while on a call to send dtmf tones for prepaid calling cards. It would be really nice. No winmo dialer has this function...a pity..even the cheapest nokia or dect phones all have this function. Inclusion into your program will be highly appreciated.
zard said:
Very good program, but too bad, I don't seem to get it to work wigh my TyTN II. Although I manage to get my house phone to dial, it didn't get through and happenedtto 1land line and 1 mobile number. Is it because thd sounds were too fast?
Click to expand...
Click to collapse
No, it's not because the sounds are too fast, I noticed that if the Volume is VERY high, due to the quality of our phones, it distorts the sound, so it has to be like "medium" for it to work, actually I am currently looking into the CF and checking how can I save the current volume set it lower when you use the DTMF and then restore it back, basically I am working on this and the prefix.
No idea if it will be released with the prefix part but, still, I am working on those 2 issues together, however the fix right now is to lower the volume on the phone =)
calling card sure why noe
joe mboule said:
How about using this program while on a call to send dtmf tones for prepaid calling cards. It would be really nice. No winmo dialer has this function...a pity..even the cheapest nokia or dect phones all have this function. Inclusion into your program will be highly appreciated.
Click to expand...
Click to collapse
ok... Just explain to me how calling cards work I don't have one... and I think I have not used one in my life but from what I have readed, mostly what you would need is a way to create a formated input for instance:
make a field where it say calling card there you write the calling card data...
so now I would have to add like a pause...
lets say you have to do this when you use your calling card:
type a number, wait for 2 seconds, type the calling card number, wait for 1 second then maybe dial a pin then the phone number ( just an example )
so maybe I could add a place where you can write a sequence like:
800123pppp12345678900pp555d
so the format would be something like:
p: = pause for 0.5 seconds
d: = dial number
maybe just in case an x for a prefix...
so lets say an example with a person that needs to dial a prefix
x<Phone for the card>pp<pin>pp<Card Number>ppd
that would mean:
x = dial prefix
dial the DTMF for the card
pp = wait 0.5s ( x 2 )
dial the pin for the card
pp=wait 0.5s (x2)
dial the card number
pp = wait 0.5 (x2 )
d = dial the desired phone number.
if that sounds correct tell me so I can implement it
of course you could be able to construct the things based on your needs
so you could go
4445p123234ppppppd (for example)
PD: I know on the post before I spoke about setting the volume from the application, but I have not found how to retrieve the volume the phone currently has, soooooo, that will have to wait a bit. tyvm
Prepaid phone cards always have an access number that can be local, national and sometimes international plus a pin that can be upto 16 digits.
SCENARIO
To make a call you have to:
1. dial card access number then wait for voice prompt.
2. voice prompt ask for card pin.
3. pin is dialed
4. now voice prompt ask for destination phone number.
5. at this point I would like to search through my contacts using the same phone then automatically send the number as dtmf tones to complete the call.
Both the card pin and access number are written on the card but not my destination number, so to complete a call I have to first write my destination number on a piece of paper which can be irritating sometimes and a pen is not always handy. So i would be happy if your program can fulfil this task or if you can direct me to a suitable program to buy.
yes
yes it is as I thought it was I will incorporate it into the software no problem !
work in progress...
Just a small update, I have all the Dialing Card things done, ( not released YET ) it works like this, currently you have 4 commands:
c = will dial your calling card ( specified on another location )
d = will dial your currently selected number
p = will pause for 0.5s
x = will dial your prefix ( if there's one )
so now you go on the Calling Card part and you can write a "mini" DTMF program for instance lets say you have this values:
Number to dial : 555-060708
prefix : 888
Calling card : 0000
then you can write something like this on the Calling Card Editor
x
pppp
c
pppp
2222
pp
d
Translated that would be:
Dial prefix
pause (0.5x4) = 2 seconds
dial the calling card
pause (0.5x4) = 2 seconds
dial 2222 ( your pin for instance )
pause (0.5x2) = 1 second
dial your number
so it will generate this DTMF tones using the values I used above:
888 ( wait 2 seconds ) 0000 (wait 2 seconds ) 2222 ( wait 1 second ) 555060708
actually when you have the Dialing card script enabled it disables the normal dial: ( prefix )(number)
and substitutes it for the script.
now I think that for the next version I'll add the pound and the number keys
it could be useful for when one dials over and over to a place where you have to dial an extension... and maybe who knows, I could allow people to save and load different "scripts"
for now the new version has not been released because I have to make it save the data of the calling card script, but, I will do that when I wake up ( 5:15am here )
after that I'll release it, so I guess in like 8-10 hours, if everything goes smooth !
Thanks !
Version 2.5 scripting examples.
joe mboule said:
SCENARIO
To make a call you have to:
1. dial card access number then wait for voice prompt. (800)
2. voice prompt ask for card pin.
3. pin is dialed (123)
4. now voice prompt ask for destination phone number. (555-5555)
5. at this point I would like to search through my contacts using the same phone then automatically send the number as dtmf tones to complete the call.
Click to expand...
Click to collapse
ok Version 2.5 is out, for instance to create the scenario that joe wrote you would have to script this:
800
pppppp
123
pppp
d
translated would do this:
1-dial the card access number in this case 800
2-wait for 3 seconds
3-dials the pin in this case 123
4-dials the phone number you select
another example:
x
pp
800
pp
c
pp
123
pppp
d
this will do:
1-dial the prefix
2-waits for 1 second
3-dials 800
4-waits for 1 second
5-dials the calling card number
6-waits for 1 second
7-dials 123
8-waits for 2 seconds
9-dials the selected phone.
as you see you can script a lot of things using the calling card script engine, however remember:
if you select call card it will override the normal dial so if you want do do a normal dial with prefix with calling card checked you would have to make this
your script:
x
d
dial prefix, dial your selected number
TYVM !
now buy me some milk !
Thanks for the quick response and effort, unfortunately it is not not what I wanted. I am using xperia dialer on my tilt and I would like an option through the menu to select a destination contact and send it automatically as dtmf instead of pressing each number manually. I don't know how to explain this any better, but it is a common funtion on many i.e nokia and cordless phones.
hi....
joe, well I can't alter Xperia Dialer, edit the menu or even grab what you selected, however this does what you want... when you click on select a contact, you get a dialog to select the person you want to dial to, then when you press on dial, it will emit the DTMF tones for the number, now since you wanted to automate the calling card process, I added the scripting lang to it, so you can keep in memory your dialing card with all the process it needs to make a call using your calling card, whatever you do by hand, you can automate it here.
just make the script that will suit your needs, it will work.
I hope you can make it, if not well I gave it my best try !
tyvm.
Nice Functions!

software issue with MS Voice command

I have the Fuze. Has there been a fix for the following issue?
If you enable "announce incoming caller" my phone will say the name if it's in my address book, or the number. When I answer the phone via BT headset, I cannot hear the caller, but the caller can hear me. If I transfer to my phone, I can now hear the caller. If I turn off the announce, then everything is working again.
Just a heads up, my phone when I first got it, would work fine, then it stopped announcing the caller. All you would hear is a "beep" in the headset. Then I was shown a regedit that got the voice to com back, but can't hear the caller.
I know this was a ongoing issue months ago, but was there ever a solve for this?
Oh my Fuze is stock.
ms voicecommand version: 1.6.19971
rom version: 1.95.502.5 wwe
rom date:10/20/08
proto version:52.39c.25.22h
@starstreak:
I'm latching on some additional URL's to help us troubleshoot the issue.
MS Voice Command on the Fuze
http://forum.xda-developers.com/showthread.php?t=445204
The Definitive Guide to Microsoft Voice Command (MSVC) 2.1
http://www.winmo-experts.com/viewtopic.php?f=11&t=2
Da_G's Simple ROM Kitchen Solutions (Fixes)
http://forum.xda-developers.com/showpost.php?p=3467110&postcount=503
http://forum.xda-developers.com/showpost.php?p=3462813&postcount=489
http://forum.xda-developers.com/showpost.php?p=3592035&postcount=644
Da_G's Simple ROM Kitchen Reports
http://forum.xda-developers.com/showpost.php?p=3455841&postcount=470
http://forum.xda-developers.com/showpost.php?p=3457239&postcount=471
http://forum.xda-developers.com/showpost.php?p=3460626&postcount=480
http://forum.xda-developers.com/showpost.php?p=3460665&postcount=481
http://forum.xda-developers.com/showpost.php?p=3460972&postcount=483
http://forum.xda-developers.com/showpost.php?p=3462787&postcount=488
http://forum.xda-developers.com/showpost.php?p=3617314&postcount=709
Few questions:
1) What file is the BT Audio Gateway pointing to:
HKLM\Software\Microsoft\Bluetooth\AudioGateway
BTAGExtModule =
2) Is there a BT Headset Call Announce key, what are the values:
HKCU\ControlPanel\Sounds\InCallPoliteBeep
3) Is there a Call Announce key, what are the values:
HKCU\ControlPanel\Sounds\TTSAnnounce
1) What file is the BT Audio Gateway pointing to:
HKLM\Software\Microsoft\Bluetooth\AudioGateway
BTAGExtModule = oemagw.dll
2) Is there a BT Headset Call Announce key, what are the values:
HKCU\ControlPanel\Sounds\InCallPoliteBeep
catagory incall
script as5p
sound application data\volatile\\ttscallerid.exe
3) Is there a Call Announce key, what are the values:
HKCU\ControlPanel\Sounds\TTSAnnounce
catagory voicecommand1
script as5p
sound application data\volatile\\ttscallerid
That happened to me with the stock 6.1 & MSVC, but, since I flashed to RRE's 6.5 V4, which uses MSVC 1.6.21234, that problem disappeared.
It would do the same thing yours did, you'd answer your BT, they could hear you but you couldn't hear them. I tried it with several different BT headsets, made no difference.
@p51d007:
If you can spare a moment, would it be possible for you to post up the registry for the BT Audio Gateway?
@startstreak:
Those registry entries don't look right (ex: point to ttscallerid.exe, extra back slashes, etc). Here are my entries:
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\AudioGateway]
REG_SZ: BTAGExtModule = \windows\VCBTHAG.DLL
[HKEY_CURRENT_USER\ControlPanel\Sounds\InCallPoliteBeep]
REG_SZ: Script = as5p
REG_SZ: Category = InCall
REG_SZ: Sound = \Application Data\Volatile\TTSCallerID.wav
[HKEY_CURRENT_USER\ControlPanel\Sounds\TTSAnnounce]
REG_SZ: Script = as5p
REG_SZ: Category = VoiceCommand1
REG_SZ: Sound = \Application Data\Volatile\TTSCallerID.wav
Cheers,
hilaireg- I remember where those extra "//" came from. It was from another regedit that was on this board.
I redid your settings on mine. Wow. I can now hear my caller. I tried it around 8 times with different phones. 2 times, my phone vibrated (I have it set to vibrate&ring at the same time) but nothing sounded on my headset untill the phone killed the call to goto voicemail. At that split second, I heard my ring tone in my ear for like less than a second. So I'm not sure if that is a new issue.
I am happy for your help. Since I got the fuze when it first came out, I never had my MSVC working this well. Thanks!
I'll post ONLY the ones that vary from yours...
Hope this helps.
[HKEY_CURRENT_USER\ControlPanel\Sounds\InCallPoliteBeep]
REG_SZ: Script = p <<<<<THIS IS DIFFERENT
REG_SZ: Sound = Alarm1.wma <<<<THIS IS DIFFERENT
[HKEY_CURRENT_USER\ControlPanel\Sounds\TTSAnnounce]
REG_SZ: Category = InCall2 <<<<<THIS IS DIFFERENT
hilaireg said:
@p51d007:
If you can spare a moment, would it be possible for you to post up the registry for the BT Audio Gateway?
@startstreak:
Those registry entries don't look right (ex: point to ttscallerid.exe, extra back slashes, etc). Here are my entries:
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\AudioGateway]
REG_SZ: BTAGExtModule = \windows\VCBTHAG.DLL
[HKEY_CURRENT_USER\ControlPanel\Sounds\InCallPoliteBeep]
REG_SZ: Script = as5p
REG_SZ: Category = InCall
REG_SZ: Sound = \Application Data\Volatile\TTSCallerID.wav
[HKEY_CURRENT_USER\ControlPanel\Sounds\TTSAnnounce]
REG_SZ: Script = as5p
REG_SZ: Category = VoiceCommand1
REG_SZ: Sound = \Application Data\Volatile\TTSCallerID.wav
Cheers,
Click to expand...
Click to collapse
starstreak said:
hilaireg- I remember where those extra "//" came from. It was from another regedit that was on this board.
I redid your settings on mine. Wow. I can now hear my caller. I tried it around 8 times with different phones. 2 times, my phone vibrated (I have it set to vibrate&ring at the same time) but nothing sounded on my headset untill the phone killed the call to goto voicemail. At that split second, I heard my ring tone in my ear for like less than a second. So I'm not sure if that is a new issue.
I am happy for your help. Since I got the fuze when it first came out, I never had my MSVC working this well. Thanks!
Click to expand...
Click to collapse
As I see it, you have a few options:
1) Continue to debug the issues
I've a feeling that the MSVC install on the ROM has been messed up. I'm not sure if it's only the registry part or if some of the exe/dll are impacted as well. If it turns out exe/dll's are also a problem, we will quickly run out of options.
In the interim, I can post up the MSVC registry file so that you can compare the settings against those in your device registry.
2) Follow p51d007's recommendation
IMHO, I recommend this approach. Drop the ROM you are using and flash a working ROM.
Alternatively, make an inventory of the applications on your device, and then look at the 6.1 Kitchen in the Raphael ROM Development thread - there's text files listing the applications in the kitchen/pack. Compare it against your list to make sure that all the applications you use/have are present and cook your own ... provides *way* more control.
* EDIT *
Posted registry and post-MSVC configuration.
I was thinking about upgrading to 6.5 if it was stable. If I had to cook.
I wouldn't call it an upgrade; it's still pretty much unreleased code.
That said, Da_G (and others) have done a fantastic job with the 6.5 code they've managed to locate.
If you need to rely on device functionality, you may want to look trying a 6.1 ROM - or cooking your own. That way, you can try WinMO 6.5 on the weekends ...
Text Messages
Voice Command on my tilt read messages and I could hear them. I realize the Fuze has had issues with Voice Command. Has anyone gotten this feature to work? Saved time from having to pick device up from desk.
try flashing back to stock and then going back to a ROM. Try out NRGZ28's Energy ROM. Working great very little bugs. on an older version but i'm sure the new one is just as stable.
It Works...
If you go to the voice command icon in settings, highlight messaging (don't just put the check mark in the box, highlight the word messaging) then push the options button. You will go to the Voice Cammand: Messaging Options and take the check out of the High priority messages only box. This should work. I have had Energy Roms anda few others, like right now I have RRE's and my messages read after doing this. Everytime I flash a new rom I have to go and do this. But it works afterwards.
Muchas Gracias
I did as you suggested, unchecked High priority massages only. Works like a charm, thanx

Can i get a little help please

OK so here are my problems please give their solution in comments
1. I editred my phonemanufactureemodelname and phone model name to RM-937 and Lumia 1520. Everything worked the keyboard got shorter,the settings got shorter. But the problem is that i can't get 5 shortcuts in my action centre
2. I edited the software/microsoft/windows/currentversion/control panel/themes/UserPreferenceWidth to 75 but still i cant get 5 shortcuts in action centre
3. Is their any hack to use my start button to wake up the phone..............
So here is the list of my problems. plz give a little help
Please set a useful subject line, first of all.
Beyond that, I don't know what's up with that. I changed nothing except the UserPreferenceWidth (on my HTC One M8) and it gave me the five buttons.
Actually, your problem is probably because you set the value in the wrong location. The correct location is (note the space in "Control Panel"):
Code:
Hive: HKEY_LOCAL_MACHINE
Path: SOFTWARE\Microsoft\Windows\CurrentVersion\Control Panel\Theme
Value: UserPreferenceWidth
actuall I forgot to mention but yes i did the same thing
HKLM/software/Microsoft/windows/currentversion/control panel/theme
key-UserPreferenceWidth
what to do
Set its value to 75 or greater (DWORD)

Categories

Resources