hi every one i was reading how to do the HARD SPL but the thing is it says u gotta have it connected to mobile device centre i have an xp pc how do i do it becasue there isnt mobile device centre for xp only vista can any one help
RTFM
http://forum.xda-developers.com/showthread.php?t=431218
"if you have vista, WMDC..."
if you have XP "you must Have Phone Synced with PC in Windows Mobile" (via ActiveSync)
You should really carefully follow every procedure step.
My advice is you should NOT do hard spl until you read and understand instruction. You can turn your phone into brick.
Related
Anyone got any problem when upgrading Rom on WIndows Vista and using the Windows Mobile Device Center instead of the traditional ActiveSync? It won't seems to connect to the device again once the device is restarted into the RGB screen [after the starting the Rom upgrade process]. After a few seconds, it got the connection error code on your PC. I soft reset the device and no upgrade has been installed. Any ideas?
I try removing the connect via USB check box and use Mtty to check the connections to my device. But after I have done that, the PC won't connect my device to my computer at all... hence, I can't get use Mtty to check the connections.
So I have no idea why this is happening on Vista. It works fine when I am using my old XP computer when I upgrade to the test ROM. Any suggestions will be appriciated. Thanks a lot of your help in advance.
Pete
http://www.modaco.com/Upgrading-to-Vista-Be-aware-RUUs-wonand39t-work-t251768.html
Looking to upgrade to Windows Vista? You might just want to keep an XP partition on your machine, as ROM upgrades via the normal RUU client do NOT work from within Vista, due to changes in the way the OS accesses the device. This also prevents IMEI-check unlocks from working on Vista.
Click to expand...
Click to collapse
Problem lies with vista, but I have read somewhere a solution is underway, or allready here...
I was performing the radio update on my MDAIII and now he hangs in the bootloader with USB in the upper middle und 2.08 in the under middle. All resets won`t bring it back to life. If I try to reinstall the update all I get is a blank message screen (update from version to version) in my Vista. How can I get out of there.
I did everything what was stated here
The original BAUpgradeUT won`t find my device. The MAUpgradeUt_noID.exe gives me the blank screen with the update from to screen.
Drake008 said:
I was performing the radio update on my MDAIII and now he hangs in the bootloader with USB in the upper middle und 2.08 in the under middle. All resets won`t bring it back to life. If I try to reinstall the update all I get is a blank message screen (update from version to version) in my Vista. How can I get out of there.
I did everything what was stated here
The original BAUpgradeUT won`t find my device. The MAUpgradeUt_noID.exe gives me the blank screen with the update from to screen.
Click to expand...
Click to collapse
I'm using a Vista PC.
After the Radio update to 1.15 the error described above is not to go away yet.
What to do, I'm nearly in tears.
Finally I got it back but with an old Romupdate from T-Online. Is there someone who got the QTC 9090 update (latest one)
That was fast..
im glad you solved your problem.
i think someone here has it.
just post what you need and make it as a title for others to read in the digest.
Im not a expert but is vista the problem??
Most likely.
Failed MDA II flash with vista notebook
Hello everybody,
I just read this thread in hope to find a solution for my problem, which is quite similar to the one described here initially.
I got a used MDA III with T_Mobile ROM. Since I'm a customer with O2, I wanted to change the ROM to O2 as well. I followed the directions given in an other thread here (don't have the link just now) and during the flashing, the flash application suddenly had no connection to my MDA III anymore. It was securely settled in its craddle an connected to my laptop via USB. Now my MDA III is stuck in Bootloader Mode with USB v2.07 displayed on the screen.
Each retry of installing either the O2 or the T_Mobile ROM now meet with the error 101: no connection. I read here that you managed to update successfully with a vista pc. Thus I wanted to ask, how you did that since I just don't seem to find the reason for the connection failing each time.
Here is what i tried to establish connection so far:
* disabled virus scanner & firewall
* unplugged the mda III and plugged it in again. It was recognized as a new device but that didn't help the connection issue
Could you please post what you did to make the update work under vista? Help would be greatly appreciated
mda3newbie said:
Hello everybody,
I just read this thread in hope to find a solution for my problem, which is quite similar to the one described here initially.
I got a used MDA III with T_Mobile ROM. Since I'm a customer with O2, I wanted to change the ROM to O2 as well. I followed the directions given in an other thread here (don't have the link just now) and during the flashing, the flash application suddenly had no connection to my MDA III anymore. It was securely settled in its craddle an connected to my laptop via USB. Now my MDA III is stuck in Bootloader Mode with USB v2.07 displayed on the screen.
Each retry of installing either the O2 or the T_Mobile ROM now meet with the error 101: no connection. I read here that you managed to update successfully with a vista pc. Thus I wanted to ask, how you did that since I just don't seem to find the reason for the connection failing each time.
Here is what i tried to establish connection so far:
* disabled virus scanner & firewall
* unplugged the mda III and plugged it in again. It was recognized as a new device but that didn't help the connection issue
Could you please post what you did to make the update work under vista? Help would be greatly appreciated
Click to expand...
Click to collapse
Try on computer with Windows XP and kill activesynk (wcecomm.exe on taskmanager/processes)
Maybe it will work. If u cant flash O2 ROM try to use "MaUpgradeUt_noID.exe". On my Qtek 9090 allways flash using this APPS and allways work.
U can try too format device first, put it on candle and use "mtty1.42.exe". On XP, kill active sync, and open mtty1.42.exe and select port USB and put OK. Do "Enter" on command and should appear USB>. After this write Task 28. This will format all your PC. Try install SO after this. This command delete all files on PPC. I have attach files that you maybe need.
thankfor the tipp and sorry for my late reply. Since I have no XP PC available i tried the mtty1.42.exe on my vista notebook. When i run it however, it only lists com port 1-3, no usb port. Do i have to make a special configuration on vista for it to work?
Thanks in advance,
mda3newbie
mda3newbie said:
thankfor the tipp and sorry for my late reply. Since I have no XP PC available i tried the mtty1.42.exe on my vista notebook. When i run it however, it only lists com port 1-3, no usb port. Do i have to make a special configuration on vista for it to work?
Thanks in advance,
mda3newbie
Click to expand...
Click to collapse
In vista i dont know...sorry for my late reply too.... in XP u must kill ActiveSync process called wincecom.exe. in vista, maybe u have to kill the Windows Mobile Device Center....i dont know...
Dont forget, put the Qtek 9090 in Boot Loader Mode (Pressing Power Button + Record Button + Reset), maybe will appear USB and u can format the device.
If this does not work, try on Windows XP....Find a friend with Windows XP and ask him to use his PC only to do that.
Maybe somebody in forum have the Windows Vista and can help u....
Sorry my terrible english....
Sjogos said:
Try on computer with Windows XP and kill activesynk (wcecomm.exe on taskmanager/processes)
Maybe it will work. If u cant flash O2 ROM try to use "MaUpgradeUt_noID.exe". On my Qtek 9090 allways flash using this APPS and allways work.
U can try too format device first, put it on candle and use "mtty1.42.exe". On XP, kill active sync, and open mtty1.42.exe and select port USB and put OK. Do "Enter" on command and should appear USB>. After this write Task 28. This will format all your PC. Try install SO after this. This command delete all files on PPC. I have attach files that you maybe need.
Click to expand...
Click to collapse
hi guys I tried the step by step process and when im enterin( Task 28 ) then pressed Enter -
Invalid command : Task28
For a help screen, use command ? or h
does any one know where the problem is??
Try this
Downlaod the XDA IIs .exe file and run it - no need to put into USB mode
http://www.o2online.ie/wps/wcm/conn...es+&+accessories/Xda+Range/Software+upgrades/
this should reset to factory default (o2)
it runs on vista too
I am not 100% sure it will work but worth a try
diesel_dog said:
Im not a expert but is vista the problem??
Click to expand...
Click to collapse
Yes, i know my reply is late but the problem ist 100% Vista! i Tryed 2 ours with vista...then i decided to format my pc and to install XP. At the first try it worked!
I searched the faq - but couldn't find the answer. I had to use xp on my 8125 for flashing - but the 8925 / kaiser is new to me. Do I still have to use a xp machine to ruu from bootloader for a 6.1 rom?
Possibly
I know that you are looking for a difinitive answer but I have an 8525, My Kaiser just arrived @ the house so I will begin modding it tonight but I haven't had any problems bootloading the 8525 in vista, alot of the threads say that ppl have but it worked eventually. it just takes me a hole lot of time to get a new phone to connect for the first time, after that it's business as usual
I flash and do all sorts of fun stuff using Vista. Just think "Mobile Device Center Connection" instead of "ActiveSync Connection" and you'll be fine.
The absolute best thing you can do is to search for "Flashing with Vista" using the search at the top of the screen. There you will find posts from the Hermes Section that are still relevant. You will rool back the drivers to the Activesync USB drivers & this is good for many reasons. 1. Flashing 2. Using Mtty if something goes wrong.
met3ora said:
I flash and do all sorts of fun stuff using Vista. Just think "Mobile Device Center Connection" instead of "ActiveSync Connection" and you'll be fine.
Click to expand...
Click to collapse
I follow this rule n everythings ran 100% smooth not a single problem!
Gotcha all - but, when i tried to run ruu from the 6.1 rom, nothing happend when I was in bootloader? Is there a special custom rom for the 8925? I had to use a custom one for my old 8125
Ug - XP did it... i tried oli's sim unlocker but couldn't get the whole job done in vista for some reason.... but I didn't uncheck advanced connections first!
new tilt
Ok I got home around 10 & have been trying to get this thing to work for like an hour & a half now, no luck, when I try to hard spl & it goes to bootloader it stays there for a minute then gives me an error
I think it might have something to do with the newer 1.93 spl - I did eventually get it to work with xp, but vista kept hanging and I did resets on the device even though the instructions in the roms said not to.... man, that's nerve wracking! I think the older 1.92 spl version ones work with the ruu better??
Some some strange reason if I try and hard spl / flash via usb method Windowds Mobile Device centre drops out half way through the process (when phone goes into boot screen) and the install fails because the phone is no longer sync'd with the PC....
I have never had this issue before....which is why it is puzzling me..
I get an error message on the PC saying: "Error [206]: Connection"
PC is running Win 7, 64bit if that makes any difference...
p.s do I need to hard spl each time I install a rom? I kind of do it now out of habbit......
djglenn1337 said:
Some some strange reason if I try and hard spl / flash via usb method Windowds Mobile Device centre drops out half way through the process (when phone goes into boot screen) and the install fails because the phone is no longer sync'd with the PC....
I have never had this issue before....which is why it is puzzling me..
I get an error message on the PC saying: "Error [206]: Connection"
PC is running Win 7, 64bit if that makes any difference...
p.s do I need to hard spl each time I install a rom? I kind of do it now out of habbit......
Click to expand...
Click to collapse
Windows 7 x64 is the problem, you need hacked drivers.
update the drivers of your phone with the ones attached here.
You don't have to do HardSPL every time, only one time is enough.
Aerox912 said:
Windows 7 x64 is the problem, you need hacked drivers.
update the drivers of your phone with the ones attached here.
You don't have to do HardSPL every time, only one time is enough.
Click to expand...
Click to collapse
Since when do you need a hacked driver to flash Xperia X1 using Windows 7 64 bit?
I've been flashing using my PC which is on Windows 7 64 bit, never have I used hacked drivers.
Aerox912 said:
Windows 7 x64 is the problem, you need hacked drivers.
update the drivers of your phone with the ones attached here.
You don't have to do HardSPL every time, only one time is enough.
Click to expand...
Click to collapse
Thanks for the reply.
I have unzipped the folder, but am unsure what I have to do with the files....
Sorry for being such a n00b....
I have a Windows 7 x64 PC and got no problem flashing different ROM's on this thread. As what the others have said, you only need to HardSPL your phone once and then you can flash any ROM you want. You don't need any drivers as I have not installed any on my PC. Maybe your phone's battery is below50% during the time of flashing? If that's a no go for you, why don't you try flashing using the SD Card method?
I have followed all the instructions on this website!! I have microsoft Vista and I installed the appropriate drivers on my phone to change the USB and everytime I try run USPL GUI v 2.5 I get a message saying Error accessing device. The phone is in bootloader mode as well while I do this and I tried to do the SSPL MAnual Touch HD on my phone and got error messages as well.....what am I doing wrong! Im stumped
Surely this phone is out of Warranty
hd2person said:
I have followed all the instructions on this website!! I have microsoft Vista and I installed the appropriate drivers on my phone to change the USB and everytime I try run USPL GUI v 2.5 I get a message saying Error accessing device. The phone is in bootloader mode as well while I do this and I tried to do the SSPL MAnual Touch HD on my phone and got error messages as well.....what am I doing wrong! Im stumped
Click to expand...
Click to collapse
You're out of warranty right?
So why not just use HardSPL?
Regards,
Tigermoto.
Same problem with Vista and Seven, even with the drivers that should work.
My solution is using an old backup notebook with XP.
Please post further queries/responses regarding flashing, USPL & HSPL here. No need for another thread
Thread closed