Hi, I was able to unlock the GPS on my Verizon Diamond Via lllboredlll Touch Pro GPS fix. It works with all my programs except for the GPS photo option in the camera settings. Basically when I select GPS photo it hangs there "initializing gps..." forever. Does anyone know how to fix this? Thanks
I have the same issue, I waited for almost 10 minutes after the "Initializiang GPS..." message... nothing!
Solved
Hey,
This thing is working for me now. I figured that the GPS had a difficulty getting a satellite lock.
Suggestions:
1. Try going on the roof of a building 5-6 stories high where there is nothing between your device and the sky.
2. Some geographical locations also pose a challenge while acquiring satellite lock so also try a different location along with #1 above.
Hope it helps!
Thanks,
Related
Does your GPS give you an accurate reading? mine sure as hell doesn't.
When I'm at my home location which is house number 16, my GPS tells me im 4 houses up at number 20, of course I look around to make sure i'm not in somebody elses home. So thats not the issue.
Its also the same when driving on Route, I never get a "You have arrived at your destination" the destination is always 4 or 5 house blocks before.
Its been the same with all the major GPS softwares available, I've tried Tomtom6 & 7, Garmin XT and IG08.
Is my Diamonds GPS having issues? Is there away to fix this or reconfigure it.
Can someone please explain why this is happening!!!
Thanks in advance
saveferris said:
Does your GPS give you an accurate reading? mine sure as hell doesn't.
When I'm at my home location which is house number 16, my GPS tells me im 4 houses up at number 20, of course I look around to make sure i'm not in somebody elses home. so thats no issue.
Its also the same when driving on Route, I never get a "You have arrived at your destination" the destination is always 4 or 5 house blocks before.
Its been the same with all the major GPS softwares available, I've tried Tomtom6 & 7, Garmin XT and IG08.
Is my Diamonds GPS having issues? Is there away to fix this or reconfigure it.
Can someone please explain why this is happening!!!
Thanks in advance
Click to expand...
Click to collapse
no, you are not imagining things, yes, there is a problem that maybe future radios will solve and yes, please make a search before you post. there are at least two more threads about this. just search GPS (the search command is in the upper left corner of the forum, on the brown band).
thank you for yr cooperation in keeping this forum clean!
here you have one:
http://forum.xda-developers.com/showthread.php?t=402039
it is about GPS accuracy. you'll find more...
http://forum.xda-developers.com/showthread.php?t=406119
read!
My GPS so far seems to be working fine, always gives me accurate readings.
In google maps, the GPS when indoors reports me as being just 2-3ft away from where I am on a good day and on a bad day can put my GPS position in my back/front garden even though I'm in the house.
The only major problem I have is when I enable Assisted GPS, with this enabled the GPS works as normal, but after a couple of times using it doesn't work properly. If I try to use TomTom 7 or Google Maps, it says it sees 5-6 sats then gets a signal then instantly reports there is not GPS device, again acquires a perfect signal then looses it again, will do this in any GPS program.
Disabling assisted GPS fixes this issue. Most problems are just software issues and this is the first radio, so future releases should be a lot better.
My GPS worked fine all day, but when the phone was sitting on my desk running Google Maps (I get a pretty good GPS reception through a Velux window), I noticed my location rapidly heading off south of France. At that point the phone dropped the signal, and I haven't been able to get a lock since.
GPS Status is only showing the one satellite lock, Google Maps can't get a position fix either. Tried restarting the phone, and have run out of ideas. Just about to try the TomTom to see if it can get a lock here...
From what you're describing, with no software able to get a lock, could be a hardware failure. Try logging a support call with HTC.
Hi Rob,
Just an update to this - I checked the NOTAMs and it turns out the military was conducting GPS jamming trials. The GPS received worked fine the next morning.
Kind regards,
Dave.
Hi, i had problems with my GPS, i had enabled the two option avaliable in the location settings. However i am able to find my location using the cell tower, but my gps sign just keeps on flashing and it was not able to lock to satellites. May i know if it is hardware issues or software?
I am able to lock to satellites before, however now it takes forever. Thank You.
Are you trying outside? It's difficult to get a signal inside.
"GPS Status" free from the market shows you some good data, like how many birds it can see.
BTW "flashing", the icon itself is appearing and disappearing or the icon is animating? Also what ROM are you on and in which application(s) are you trying.
This may not help that much but I damaged my long coax to the gps chip while I changed my housing. Since then it acts the same as you described, so you could be experiencing a hardware issue. The parts for the gps can be found online for about $40 if you determine its a hardware issue.
Reply
Hi, i am on KB7SQI's Rogers Mod 2.3, hmm i did tried it outdoor before and it refuses to lock on to the satellite. The icon of the gps will come on and off, it does not stay fixed, i have also tried on Google Maps App. It cannot detemine my location. Locking onto the satellite should take a few seconds, however mine took forever.
I am hoping it is not a hardware issue, importing parts would be very very expensive for me. I believe if it is a hardware issue,the icon will not even appear. Is there anyway i could test out whether my gps chip is working? Thank You.
hazeline said:
Hi, i am on KB7SQI's Rogers Mod 2.3, hmm i did tried it outdoor before and it refuses to lock on to the satellite. The icon of the gps will come on and off, it does not stay fixed, i have also tried on Google Maps App. It cannot detemine my location. Locking onto the satellite should take a few seconds, however mine took forever.
I am hoping it is not a hardware issue, importing parts would be very very expensive for me. I believe if it is a hardware issue,the icon will not even appear. Is there anyway i could test out whether my gps chip is working? Thank You.
Click to expand...
Click to collapse
did you try a factory wipe/reset?
Reply
I have just upgraded from v2.1 with a wipe, thus this is a wierd problem for me. Any Idea, besides hardware problem? Thanks
Disable (and do not enable even after we're done here) Use Wireless Networks under Settings ---> Location and Security.
Go into LbsTestMode (*#*#1472365#*#*)
Go to Application Settings
Enable MS-Based Mode
Increase Accuracy to 100
Leave the rest stock
Return to the main LbsTestMode menu
Go to SUPL/CP Settings
Select the Serve FQDN Type drop down menu
Hit AUTO Config
Exit to the dialer and reboot your Vibrant twice for good measure.
If the accuracy of your location degrades try using the stock www.spirent-lcs.com settings again.
Now from what I can tell, Google Maps works much better with these settings. The first lock takes 15-40 seconds depending on your view of the sky(indoors/out). You may get a "Location Unavailable" message from the first hit of My Location but it should come around shortly after.
The accuracy is good enough for in-car tracking. Haven't testing walking yet
I'll report back if I find that the GPS eventually ****s the bed and takes much longer for the subsequent fresh fixes.. which seems to be the trend for a new Vibrant. Also, moving your hand away from the GPS antenna will make things quicker. It's to the far right of the camera.
lemme give this thing a shot...hope this works
twistkill said:
lemme give this thing a shot...hope this works
Click to expand...
Click to collapse
I must've deleted which MS - Mode but make sure it's MS-Based and not Assisted. Make sure you leave Wireless Networks off completely as well because this will prevent a GPS fix in GMaps for some reason.
Let me know if it works any better!
I gotta say so far this is the best fix yet I did everything but had to reboot a third time cause for some reason I wasn't connecting to data, but after that it was golden I did the satellite test and it got 14 satellites in about 5 seconds so it seems to me that this works the best. Thanks for the find, but what does skyhook do you have the option to turn it on or off what's the difference?
Thanks
Thank you sir for this fix..i just tested this and i got my gps lock with in 10 sec...Cheers!
edit...
http://www.skyhookwireless.com/press/skyhooksamsung.php
seems to be some sort of location based software...might be worth a shot
Nice Fix - thanks, works well
will this method help at all with My Location being set to Pawcatuck, CT (when I'm in Houston, TX) while indoors? Problem occurs randomly.
WOW it works took less than 10 seconds to get a signal indoors.
Thanks.
jkcheng122 said:
will this method help at all with My Location being set to Pawcatuck, CT (when I'm in Houston, TX) while indoors? Problem occurs randomly.
Click to expand...
Click to collapse
I can't say for sure since I've never had this problem. Maybe someone else has and will try this otherwise, the only way for you to know would be to try it out. If AUTO-Config gives you these problems move back to spirent-lcs
skater4690 said:
I gotta say so far this is the best fix yet I did everything but had to reboot a third time cause for some reason I wasn't connecting to data, but after that it was golden I did the satellite test and it got 14 satellites in about 5 seconds so it seems to me that this works the best. Thanks for the find, but what does skyhook do you have the option to turn it on or off what's the difference?
Click to expand...
Click to collapse
It's something to do with LBS I know that so the link below here should help explain things more indepth.
sync3 said:
Thank you sir for this fix..i just tested this and i got my gps lock with in 10 sec...Cheers!
edit...
http://www.skyhookwireless.com/press/skyhooksamsung.php
seems to be some sort of location based software...might be worth a shot
Click to expand...
Click to collapse
***Most importantly, we have to see if this lasts or not! I noticed some weirdness on AUTO-Config and I'm going to be trying out Spirent for the time being.
WOW it works took less than 10 seconds to get a signal indoors.
Thanks.
jkcheng122 said:
will this method help at all with My Location being set to Pawcatuck, CT (when I'm in Houston, TX) while indoors? Problem occurs randomly.
Click to expand...
Click to collapse
I live in Houston, and I get that randomly when I'm at work. I have that problem with the old and new Vibrant. The new Vibrant, locks on my location when I step outdoors though with no problem at all. I'm just testing this FIX to see will it fix the indoor problem, but so far, it just showing me I cant find a location.
Edit: After 5min it found my location... Running the GPS Test and it actually locks on and off 1 Satellite..
kiddiosky said:
I live in Houston, and I get that randomly when I'm at work. I have that problem with the old and new Vibrant. The new Vibrant, locks on my location when I step outdoors though with no problem at all. I'm just testing this FIX to see will it fix the indoor problem, but so far, it just showing me I cant find a location.
Edit: After 5min it found my location... Running the GPS Test and it actually locks on and off 1 Satellite..
Click to expand...
Click to collapse
Cool, doing the fix now.
For indoor the new method does not get me a GPS lock. For outdoors I didn't have problems using the previous fix.
jkcheng122 said:
will this method help at all with My Location being set to Pawcatuck, CT (when I'm in Houston, TX) while indoors? Problem occurs randomly.
Click to expand...
Click to collapse
I have the same damn problem, I'm in Houston, TX and it says I'm in CT
Gentlemont said:
I have the same damn problem, I'm in Houston, TX and it says I'm in CT
Click to expand...
Click to collapse
Samsung has now officially acknowledge this problem and has promised a fix
See:
http://bit.ly/gpsack
So I did this change and got 11 satellites in my office in the GPS Test option from those test mode settings BUT GMaps still says unavailable. Any advice?
Man I am so bummed...i really wanted this to work...i don't use the gps sll the time but I use it enough that I am almost regretting my purchase..i hope I can get a gps lock tonight so I can actually find my way...this is really frustrating
kiddiosky said:
I live in Houston, and I get that randomly when I'm at work. I have that problem with the old and new Vibrant. The new Vibrant, locks on my location when I step outdoors though with no problem at all. I'm just testing this FIX to see will it fix the indoor problem, but so far, it just showing me I cant find a location.
Edit: After 5min it found my location... Running the GPS Test and it actually locks on and off 1 Satellite..
Click to expand...
Click to collapse
What is it with people in Houston all having this problem. I wonder if it is just the area we are all in (I work near the Medical Center.) I want to trade my phone in for a new one but if its going to have the same problem I am not sure it would be worth it. Are you having the problem still after you switched yours out? Is anyone else getting the error of "Not enough space in music database" when trying to listen to music and selecting the "Artist" category?
I'm in Houston and its always saying I'm in Houston and I tested the gps while in my truck and its great but indoors its not that great... but is need it more in my truck anyway so who cares lol
Anyone else having issues with the settings in the LbsTestMode menu not sticking? I was able to implement one of the posted fixes here before, but not this one as the settings will not stay. They change successfully on each screen, but as soon as I go back and then return to the screen, they are back to where they started. I can even confirm the settings did not change at the bottom of the main LbsTestMode menu with the status display. I've turned off the Wireless Networks setting under location before trying this many different times, reboots out the wazoo and at different stages(tried changing the setting, rebooting immediately without checking it again and no go). Also did a 'Delete GPS Data' with no help.
*edit* It appears I can change the SUPL server address and port just fine, but the operation mode change from MS Based to Standalone does not stay.
Hi All,
I got problems getting gps fixes in Germany (Aachen)
In fact, i wont get any gps fix at all, i tried the app "gps status" but nothing happens.
i tried changing the pool servers in gps.conf to de.pool and europe.pool servers,
set near countries (be, nl, lu, fr) as secondary servers and nearly every gps fix thread i found in the last 2 weeks but still nothing works
second mysterius thing is that in my hometown (Duisburg, germany too) there is no problem with my gps connection and i got a fix in like 30seconds.
i dont know if that problem occurs because Aachen is really near to 2 countrie's frontiers but i really ran out of ideas what to try :/
no matter how hard i try to find something myself or edit the gps.conf my gps status keeps like this all the time (attachment)
please help me :/ (and excuse my bad english *blush*)
1. Try "GPS test" from the market. This app will show you the satelites and their position. If after about 20 min. outdoor nothing is showed you have a hardware or rom-problem.
2. If a sat. is shown mybe you have wrong configuered firewall. I don´t remember the process which get the gps-position by the servers.
3. I had never problems with any server, all works fine for me, but with the app "fasterfix" you can change them and give an european a try.
Hope can help you.
1. When im in a good position GPS test and GPS status occasionally see a satellite or two, but they disappear as fast as they appear :/
2. i dont use a firewall at all, i think.. is there a android standard firewall or something?^^
3. i tried fasterfix and some gps.conf tricks from xda, too
also i tried adding or changing different pool.ntp.org servers in my gps.conf
but nothing helps :/
the real funny thing is, that saturday and sunday i was in Duisburg and used GPS for Running and Cycling (Endomondo 30km~) and had nothing near a problem, no edge or something that could indicate gps problems, satfix in under 1 minute and stuff.
Now, back in Aachen, most gps using apps tell me there is even no gps available :/
the hardware and rom didnt changed at all, i really dont know why this mean little thing wont work
thanks for your reply btw!
You should get a gps-fix with gps-test outdoor within 20-30min without an internet-access. Be patient, due a totally new allocation via gps without server-support can take a lot of time (sat-search, time-fixing …). Sats appear and disapper, this is normal during a totally new allocation. After this you can discard a hardware/ROM – problem.
If this work, you can search for the server-access issue to get a faster gps-fix.
P.S.: Android normally haven’t a firewall in stockROM and your attachment in your first post can’t be shown.
The attachment was just a screenshot of GPS status showing no satellites, but trying.^^
so i will try to go out and let that little mean phone search the sky for satellites now^^
humpf... no effect at all...
Then I recommend to go back to stock-ROM (without root of course) an contact the LG support and send it back (don’t forget nandroid backup!). Maybe try it a last time with stock-ROM 30 min outdoor before (to get sure).
It seem to be a hardware defect. The phone don’t get enough signal strength (maybe antenna contact).
Good luck!
May be you can try ny method because i'm using it and it works onder for me..
Here is the link http://forum.xda-developers.com/showthread.php?p=22479338#post22479338