Related
Since previous thread was locked, figured id try again in a new section...
Ok folks, I left the android scene about 2 months ago, and when I came back, theres ROMs coming quicker than I can handle, and all of a sudden I have at least 5 to choose from, including multiple methods to obtain Apps2Sd.
I decided to try the new "Hero w/Rosie" build, and well it looks pretty nice from the pictures, but its a b**ch to put on the phone. I have a PVT Android G1, newest radio, newest SPL (Haykuro's) and newest recovery, with the tweaks. I also have a linux distro and paragon partition manager, all the required tools (besides the actual ROM and the app_s)
So I have the card partitioned, ext2 and one fat32. I also have the apps2sd located on root of the fat32 partition. I followed Lawrences tutorial for installing and when it came down to typing the commands in terminal to copy the app_s to the /system/sd, it stops withing 2 minutes to tell me theres no space left.
So I tried copying the app_s on the actual ext2 partition (Spent a good 4 hours getting Windows 7, Windows XP, and Ubuntu 9.04 to boot through my bootloader) and still no luck, whats even worse is my sd card cant be used at all by the phone. Ignoring the new problems, I typed busybox df -h and to my surprise, /system/sd did not exist, hence my ext2 partition wasnt being picked up at all by the phone....
Im at a complete halt and have NO clue what to do next, can anyone lend me some of their time and help me?
The modified boot image should automatically detect the ext2 partition and mount it if you did the partitioning correctly.
If it's not mounted, /system/sd is just a normal folder under /system, which explains the not enough space problem.
What you should do is check whether the EXT2 partition is the SECOND partition on your SD card and it should be a MAIN not EXTENDED partition.
Ironically, ive done that as well.... I used paragon to make an extended partition in the beginning and that didnt work, so then i tried it again at the end. Both did not work, but I shall try again and let you know how it goes. Maybe my SD card is shot, since it doesnt want to work at all....
Ill post as soon as I try again
Well... amazingly it worked this time! Surprisingly, I did the same steps as I have been doing, but I'm guessing this time what made the difference was extracting the app_s in linux and then copying it straight to, then unmounting both parititions. very odd, but thank you so much!
Ive tried installing Cyanogen about 10 times on my G1 and it always ends up the same no matter what guide i use. Ive tried so many different "stable" versions of Cyanogen i dont even know where to begin. I downgrade to RC29 fine, Install the radio update, and gain root access. Then i boot into the Home+Power menu and install Cyanogen through the Alt+S install prompt. Then the phone reboots and either hangs at the G1 screen or loads to the Cyanogen (Blue text) Android screen and hangs there and the screen eventually goes black.
Another time i installed a more recent version of Cyanogen, After about 5 minutes of sitting at the android screen it would load, but all the applications would instantly crash and i would have no choice but to turn the phone off. Does anyone have any idea what im doing wrong. Ive been searching every android forum for the past 4 days and cant seem to find a solution to solve this problem.
I don't know if this will work since you don't have a Cyanogen ROM to begin with, but you might try the Cyanogen updater app in the market. It is unbelievably easy and does everything for you from downloading the rom to rebooting into recovery and automatically flashing it.
Did you partition you sd? I am pretty sure any cyan mod requires a fat32 and ext2 oartition for the auto apps2sd.
crpercodani said:
Did you partition you sd? I am pretty sure any cyan mod requires a fat32 and ext2 oartition for the auto apps2sd.
Click to expand...
Click to collapse
Nah, it works fine without an ext2 partition, once you create one it will copy your apps over and set it up on boot. It does seem to have issues when the partitioning isn't right though. I've found doing partitioning in recovery console most reliable.
I have the same problem and to me it DOes have issue when the partitioning isnt right cuz I failed the partition... in console it just didnt work, and now everytime I try to reinstall the rom it turn black after the blue android logo...and from there Im stuck, I just dont know what to do to make it work...
have you tried checking the md5sum to see if you got a bad download. i got one once and nothing would work
MD5 sum matches up fine. Is there anything else i should be adding to this procedure?
http://forum.xda-developers.com/showthread.php?t=548924
I do this guide word for word and end up with that black screen i was describing before every time.
Install CyanogenMOD 4.0.1 (Stable), Right after that section of the guide when i reboot my phone, i get the black screen after the android logo sits for about 5-10 minutes and i cant continue with the guide any further although im assuming the other guides after this are optional.
have you tried the latest 4.0.4 rom?
Yessir i have. Ive tried 4.0.2 and older versions as well. No luck just different problems.
Can we install another rom other than cyanogen on the cyanogen recovery? cuz if so ill try to install a rom that dont have app2sd just to see...
Ive find my problem now my cyanogen work...it was my sd card that is not well partitioned even tough I reformated it to fat32 it just wont work..so after installin the cyanogen rom i just removed the sd card and it worked fine...so I guess ill go buy a already partitioned sdcard cuz im havin problem with theses...
I can't believe that no one has said this to the op but did you wipe before flashing
yea wiped... but now how to I proceed? I need an sd card...
If I partition my sd card outside of the cellphone and put it in, will cynogen rom will recognize that app2sd is possible or I will need to reinstall the rom?
I was suggesting wiping to the op mesh, forken, yes you can partion the card outside the phone as long as you have a fat32 partion on there since it is the only file type that the phone will recongize as a non operating storage place for your roms and other files
partitioning is so simple, just use console and follow the guides. Make sure you know what size your card is and you will be fine. You can't buy a partitioned sd card so your gonna have to figure it out.
once in recovery goto console
hit enter after each line
parted /dev/block/mmcblk0
print (this will give you your sd size in mb)
mkpartfs primary fat32 0 xxxx (xxxx is the size you get in print MINUS 512)
mkpartfs primary ext2 xxxx xxxx (first xxxx is the size of your sd MINUS 512, like we just did. 2ND xxxx is the full size of your sd)
then goto recovery and click fix/repair ext filesystems.
well yes you can buy a pre partion, theres a android website where you can buy pre partition sd card anyway you like it...
the problem is that my sd card is bugged now I think I need to fix it before trying to partition it again...cuz it wrongly partitioned..
Really you can buy pre partion cards, I think I just found my next scheme to make money since I can use the partion editor in ubuntu in 3 minutes so there is 60 minutes in an hour, so that's 20 cards an hour and I am lazy so 5 cards a day. How much is the mark up on these pre partion cards, I can out do them by 50 cents, make a link to my website for them in my sig and prob make a little profit, yay, go ignorance and laziness
ahah ill post it...
Do you know if I can fix a wrongly partitioned sd card... with just trying to partition it correctly? or I need to fix it first?
Sure, wipe it completely clean, it's called reformating. Make new partions, whichever way you are using for partion does not seem to be working for you so I would suggest trying to find another way, try googling gparted like I told you before to do and give that a try
just format the card to FAT32. You don't need an ext partition to run cyanogen, you just need it if you want apps2sd. And do a low level (not quick) format.
ive tried to reformat to fat32 and it does the same thing...
So, I got a 4GB sdcard the other day. It came out of a blackberry a friend of mine was using. I formatted the card to FAT32 with the utility in windows 7, and everything seemed to be fine. I downloaded ext2fsd to be able to copy my ext partition to my new card. I followed the directions from the website about mounting the ext partition.
After I performed the steps above, my sdcard became unusable. I tried to take it out, and put it back in my card reader, and I get an error saying windows needs to format the drive, if I try to format it, it doesn't work. I've tried in gparted as well, and also get an error. I even tried from Amon's revorery, and sdparted in the console. I don't get errors with the latter two, but my card reader still says it's RAW.
I know that was lengthy, but I'm trying to figure out anymore steps to take, or if I should just throw the card away.
Thanks
ok..
wow.
You have to have 3 partitons. If you only format it with 1 partiton, you cant save data on a partition that doesnt exsist.
You have to go to recovery console and make a fat32, ext3 and linux swap partion.
I dont have the patience to go trhough it all with you because its in 100 different threads so .. use search?
Not trying to be rude, but this is stuff you can fin don your own here very easily if you werent expecting someone to do it for you
EDIT-- sorry, dont think i read fully what you did. I had this same thing happen today on a friends brand new 8gb.
HEres what I did since you have Amen ras recovery..
Format to just FAT32.
Turn on usb
give it a second to pop up and it will and check the size.
Then turn off the usb, go into parted on console, rm 1, then remake all 3 partitons according to the size of the card.
I suggest not using the full partiton in the recovery because it usualy screws up the swap.
From there you will be fine.
If it doesnt work that way, then im sorry, the card may be pooped or to low a class maybe?
crypysmoker said:
ok..
wow.
You have to have 3 partitons. If you only format it with 1 partiton, you cant save data on a partition that doesnt exsist.
You have to go to recovery console and make a fat32, ext3 and linux swap partion.
I dont have the patience to go trhough it all with you because its in 100 different threads so .. use search?
Not trying to be rude, but this is stuff you can fin don your own here very easily if you werent expecting someone to do it for you
EDIT-- sorry, dont think i read fully what you did. I had this same thing happen today on a friends brand new 8gb.
HEres what I did since you have Amen ras recovery..
Format to just FAT32.
Turn on usb
give it a second to pop up and it will and check the size.
Then turn off the usb, go into parted on console, rm 1, then remake all 3 partitons according to the size of the card.
I suggest not using the full partiton in the recovery because it usualy screws up the swap.
From there you will be fine.
If it doesnt work that way, then im sorry, the card may be pooped or to low a class maybe?
Click to expand...
Click to collapse
Yeah, I know you're not trying to be rude, but I know I need 3 partitions. I'm pretty aware of the way a sd card needs to be partitioned. I've tried everything mentioned. I think it's about time to call it quits. It's a class 2 card, so I don't think that's the issue, and I can't format in Ubuntu, or Windows. Oh well I suppose. Thanks.
You can try this app. Its called Sd formatter...it reformats the SD. IT worked for me.
http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
cholito said:
You can try this app. Its called Sd formatter...it reformats the SD. IT worked for me.
http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
Click to expand...
Click to collapse
I forgot to include this in the original list of things I tried, but I did give it a go. It is telling me the card is write-protected even though the switch on the adapter is set to the unlocked position. I've also tried it with a different adapter. I appreciate everybody's input.
well try using parted commands to write from block 0 to the last block and partition the whole thing as fat32
is that not working?
did you tried partitioning with RA 1.2.3 recovery?
@B-man007
I haven't tried writing the whole thing to FAT32 with parted. I'll give that a try tonight (don't have the card with me).
@cholito
I'm using RA 1.2.2, I think the script is the same, so I don't know that it would make a difference if I was using that or 1.2.3
As i see, more and more people are asking, how to install Android. And since previous tutorial is outdated, i will create new one.
So, first some theory. There are two types of releases: ones with ext2 partition and ones without. Second ones are much easier to install (just copy files to SD card), but ones with ext2 partition are faster and works overall better. All newer releases are with partitions.
So, how to install Android?
1. First we must prepare our SD Card. You will need 1GB+ Card. Some users are reporting that there are problems with several cards, so i suggest you stick to card you got with your X1 (it works 100%).
Now it's time to hook SD card to your computer. You can transfer files via X1, but I recommend getting a card reader, since file transfers will be more reliable then.
Before you begin, backup all your files on SD card. When partitioning, all data on your card will be deleted.
So, let's begin. Partitioning is fairly easy, but instead of writing this in text, i will show you video guide of creating partitions (thanks to user e334 for making this tutorial):
(Program in the video is Minitool Partiton Wizard. Grab home version from their page.)
2. After we properly make partition, it's time to download android build. Beware, that root of your SD card will be messy. There is a method to run it in folder (Andboot), but i didn't manage to make it right.
In the time of writing, (my opinion) best release is neopeek's SuperFroyo + v2c kernel. But releases are changing rapidly, since Android is still under development. I will try to update that page, but i suggest you always check the forums for some new releases.
As you can see, this release is in two parts (main release + kernel). But most of the time, there are releases with kernel included, so you don't have to download it separately. So anyway, download and extract main release, kernel and modules into root of the SD card (leave modules in .tar.gz file!).
After copying, use safely remove hardware before disconnecting SD card.
Now it's time for big final. Open file explorer on your X1, navigate to StorageCard\npkinstall folder and click install. If you have done everything right, your phone should go into "text mode" (black screen with bunch of text) and after about a minute, it should start displaying long list of files. That means it's installing android to EXT2 partition. When installation finishes, it will automatically reboot.
Your X1 Android is ready to use now. To launch android, open file explorer, navigate to \StorageCard and tap HARET. Again, it should start displaying text and after that logo should appear. When android appears to be loaded (start wizard pops up), leave it for another several minutes, so Android can initialize all background stuff it needs to.
Happy Androiding!
Frequently Asked Questions
How to return to Windows Mobile?
Simply restart your device. Android won't alter Windows Mobile or on board storage at all, so your windows mobile stays intact.
So, now my Windows mobile is running in background?
No. HARET will shut down Windows Mobile, so Android can have all the memory for himself.
Battery life is very short
Yes, android power management is not very good. But it's getting better, especially last days there were some major improvements in that area.
Camera/FM Radio/Something don't work
Android is still under development, so not all features are working yet.
I can't see my new EXT2 partition in windows
That's OK. Only linux sistems like Android and Ubuntu can see EXT2 partition. Although, you can install 3rd party software, that can add ext2 support to windows (google for "ext2 windows").
How big should i make ext2 partition?
EXT2 partition is system partition for Android. It needs to be big enough to fit all android system files in, but there is no point to make it too big, since data is stored to SD card anyway. Somewhere between 300 and 500MB should be fine. Make it 512 if you have space to spare or 300 if you are really low on SD card space.
I can't enter my SIM PIN!
PIN is currently not working in Android. Turn off PIN in Windows Mobile.
matejdro.. you are one of the best "teachers" thanks a lot.. very kind if you could update this threat everytime if something is new, because there are a lot of new kernels and things coming in.. i try to get in to this matter but at the moment all i understand is.. chinese mixed with japanese.. hehehe
Hey, please, can you add "how install dual boot" in this guide? I really need it, sorry my bad english
Sent from my FRG83 by Neopeek using XDA App
How big the ex2 partion must be? 300 ,500mb?
EDit: i have made the ext2 and the fat32 partition but i can only see the FAT32 in windows. Am I missing something?
viper. said:
How big the ex2 partion must be? 300 ,500mb?
EDit: i have made the ext2 and the fat32 partition but i can only see the FAT32 in windows. Am I missing something?
Click to expand...
Click to collapse
Nothing is wrong.
Actually, Windows can't read an ext2 partition, because it's a linux-based partition.
About the size.. i don't know, but i followed the tut' and put the same size. It works well.
Oggy972 said:
Nothing is wrong.
Actually, Windows can't read an ext2 partition, because it's a linux-based partition.
About the size.. i don't know, but i followed the tut' and put the same size. It works well.
Click to expand...
Click to collapse
Yep, i have realised that windows7 is unable to read that partition because i did install the android on it and everything went fine. My partition is 450mb large and its working normally. This is so much better then other xdandroid version beacuse with this build you can connect x1 and the pc via usb .
Added both questions to FAQ.
thank you so much for this!
can someone please give the proper instructions on how to use the andboot floder does the folder have to start with capital?
and the v3c kernel needs to be run using someother programs and methords which are there in that thread can you help me with them?
Is it necessary to leave some unallocated space on SD card as shown on video ? And what size of swap partition should be ?
I'm not sure why he left unallocated space, but it's not necessary.
For swap partition, I'm not even sure if android uses it. You can live without it.
hello
I need help
If i start the exe it boot.
But when it is finished it restarts and then there is windows .
Whats wrong ?
Have you done everything correctly? Delete everything and try again.
Also, what is your battery level?
I have successfully install Android with ext2 partition on my X1. But, when I boot to Android, it always hang.
Sometime it hang at the first boot (when Android ask me to configure Google account to sync), sometime it hang when I try to change Android setting, sometime it hang when I play music, but often it hang when I put Android on standby (I press the power button).
I use 4GB SD card and partitioned it into two partition, FAT32 2,5GB and ext2 450MB.
I have try two Android build : CyanogenMod 6.1 and X1-frg83-06112010. Both have the same problem. I also try replace the kernel (zImage) with sp3dev, but the problem still there.
The other thing I try was extract androidinstall.tar.gz directly to my ext2 partition, but Android still hang.
Do you ever encounter this problem? How to fix this?
Hello
Now i have android all is ok and does go.
But one problem if i press the ok and the other buttons does go.
But a little time later no buton does go anymore.
Whats the problem ?
Signing in...
Hi,
All went well.
Now 1st boot it tries to get to me google.
Nothing happens.
It tells me 5 minutes, but that was 10 minutes ago
I am on 3G
Any help?
Edit: (Will boot again, and let you know if it works.)
Edit: Rebooted, and skipped the google account login. Will try with WiFi on loging into google again.
?
Sorry, i don't understand you. What is bugging you?
Firstly, BlaY0 has a great tutorial on how to do this properly, I suggest you do that to learn something.
Secondly, I cannot confirm that this is 100% safe. BlaY0's method should be 99% safe, I don't know about this as it is all automatic. BlaY0's method is tried and tested, this is not. I only used this method as I had a new SD card and I was in a hurry (exams coming up ) and I didn't have time to remind myself of BlaY0's method, and CWM only allows you to create up to 512mb partition. Also, I had a new computer, and I don't have time to set up ADB all over again.
Anyway, this is a method for people who don't want to use ADB to partition their SD card for A2EXT or DATA2EXT (a.k.a. apps2sd, etc etc), and are using Windows. If you're running linux, you could use something like gParted to partition it, not sure about OS X though. This method will allow a Windows user to create an EXT partition on their SD card alongside the FAT partition.
1) Download and install Minitool Partition Wizard, from here.
2) Open the program and delete all partitions from the SD card (which you will have inserted into the computer using an adapter or something). DO NOT DELETE THE PARTITIONS FROM THE HARD DISK! MAKE SURE YOU KNOW WHAT YOU'RE DELETING. Oh, and make sure the SD card is backed up
3) Create a FAT32 primary partition. You decide how big you want it, but I'd advise you leave 1024mb (1gb) for the EXT partition.
4) Create an EXT2/EXT3/EXT4 (you decide) primary partition. Use up the rest of the space on the SD card.
5) Click assign/OK/whatever and wait for it to complete
6) You now have your partitioned SD card ready for an A2SD ROM!
7) You need to assign a drive letter to the FAT32 partition. Not sure about the EXT partition. At first I forgot to do this and my card didn't show up in Windows, though Partition Magic can still see it.
Like I said, do yourself a favour and use BlaY0's method here, but if you're lazy or you don't have time or ADB doesn't work anymore, use this.
Nice one m8. You mentioned that CWM doesn't offer adding partitions bigger than 512 MB. Well, you're right but that's why I made a customized version of fake-flash that can do bigger... to 1 GB. It can even add second ext partition for some exotic types of data2ext. On top of that I added auto block alignment which is described in my guide (the manual one) so no more calculations and manual labour
Sent from my HTC Legend
BlaY0 said:
Nice one m8. You mentioned that CWM doesn't offer adding partitions bigger than 512 MB. Well, you're right but that's why I made a customized version of fake-flash that can do bigger... to 1 GB. It can even add second ext partition for some exotic types of data2ext. On top of that I added auto block alignment which is described in my guide (the manual one) so no more calculations and manual labour
Sent from my HTC Legend
Click to expand...
Click to collapse
Ah, I didn't know about your customized CWM, I think I'll just use that next time
BlaY0 said:
Nice one m8. You mentioned that CWM doesn't offer adding partitions bigger than 512 MB...
Click to expand...
Click to collapse
I remember some version had the ext menu up to 4GB
BlaY0 said:
On top of that I added auto block alignment which is described in my guide (the manual one) so no more calculations and manual labour
Click to expand...
Click to collapse
Didn't know that, good to know, for those of us still using data2ext, this is important...
Wish this was up earlier, spent an hour repartitioning my card using parted.Couldn't upgrade to EXT3 and ended up using CWM 3.0.2.8 to do it instead lol
What CWM is using under the hood for partitioning is actually parted.
Sent from my HTC Legend
Tried it but it didnt work not sure what the problem is...
formatted my SD to FAT 32 and reserved 1G for EXT3 both as primary partition in the Mini Partition Tool
Plugged it in my phone,
Ran ADB shell
# a2sd --enabled, rebooted
on reboot nothing seemed to have changed... went back to ADB shell
tried a2sd --free it says A2Sd is not active ...
a2sd -- enabled again and it says it is enabled but not active
so im guessing it cant read or recognize the EXT3?!
Any clues... i didnt want to move my Dalvik to SD ... should I try EXT4 or even EXT2?
QkSi1ver said:
Tried it but it didnt work not sure what the problem is...
formatted my SD to FAT 32 and reserved 1G for EXT3 both as primary partition in the Mini Partition Tool
Plugged it in my phone,
Ran ADB shell
# a2sd --enabled, rebooted
on reboot nothing seemed to have changed... went back to ADB shell
tried a2sd --free it says A2Sd is not active ...
a2sd -- enabled again and it says it is enabled but not active
so im guessing it cant read or recognize the EXT3?!
Any clues... i didnt want to move my Dalvik to SD ... should I try EXT4 or even EXT2?
Click to expand...
Click to collapse
Take me through what you did, step by step. You say you reserved 1G for EXT3, but did you actually format it as another partition?
QkSi1ver said:
Any clues... i didnt want to move my Dalvik to SD ... should I try EXT4 or even EXT2?
Click to expand...
Click to collapse
It has been mentioned here like a gazilion times, boot up your device with logcat and see the first few lines...there is your answer!
Google how to wait for the device with logcat
1) Downloaded and installed Minitool Partition Wizard from your link. I got the free home edition
2) backed up my SD card and Open the program and delete my SD card partition ( which is in a card reader)
3) Created a FAT32 primary partition of 69xx MB and left the rest 1024 MB for the other unallocated space
4) Right click on the Unallocated Space to create an EXT3 as primary partition with the default cluster size.
5) At this point, it showed 2 partition on my SD, one with the drive letter for windows FAT32, and the 2nd one Ext 3 with 1GB and Primary. Clicked OK and Apply and wait for it to complete.
6) once complete , put it in phone, plugged usb and ran adb shell
7) ran a2sd --enable, it said reboot phone.. i made a mistake to reboot by adb the first time but then did the whole process again a 2nd time using reboot from the phone....
Tried logcat using this command "adb -d logcat>mylogfile.txt"
couldnt find the file anywhere ... if i dont redirect to the txt , it goes too fast to read and there's soo much debug messages what do i need to look for?
I thought it would save me time to get it done through windows... but its taking me as much time it w0uld probably get me with the manual way...
i'll give it a try tomorrow...
8) rebooted fine, and i was still low on space.. so went back in adb sheel to check a2sd --free but this is where it says not active..
QkSi1ver said:
1) Downloaded and installed Minitool Partition Wizard from your link. I got the free home edition
2) backed up my SD card and Open the program and delete my SD card partition ( which is in a card reader)
3) Created a FAT32 primary partition of 69xx MB and left the rest 1024 MB for the other unallocated space
4) Right click on the Unallocated Space to create an EXT3 as primary partition with the default cluster size.
5) At this point, it showed 2 partition on my SD, one with the drive letter for windows FAT32, and the 2nd one Ext 3 with 1GB and Primary. Clicked OK and Apply and wait for it to complete.
6) once complete , put it in phone, plugged usb and ran adb shell
7) ran a2sd --enable, it said reboot phone.. i made a mistake to reboot by adb the first time but then did the whole process again a 2nd time using reboot from the phone....
Tried logcat using this command "adb -d logcat>mylogfile.txt"
couldnt find the file anywhere ... if i dont redirect to the txt , it goes too fast to read and there's soo much debug messages what do i need to look for?
I thought it would save me time to get it done through windows... but its taking me as much time it w0uld probably get me with the manual way...
i'll give it a try tomorrow...
8) rebooted fine, and i was still low on space.. so went back in adb sheel to check a2sd --free but this is where it says not active..
Click to expand...
Click to collapse
Tbh I'm really not sure. One thing I forgot to mention in the guide is that you should assign a drive letter to the FAT32 partition or it won't show up in Windows. I didn't assign one to my EXT4 partition though, and DATA2SD is working great for me. Try deleting all partitions from the SD card and start again. It'll only take 10 minutes, and if it still doesn't work just use the manual way.
Sorry.
alexhtclegend said:
Tbh I'm really not sure. One thing I forgot to mention in the guide is that you should assign a drive letter to the FAT32 partition or it won't show up in Windows. I didn't assign one to my EXT4 partition though, and DATA2SD is working great for me. Try deleting all partitions from the SD card and start again. It'll only take 10 minutes, and if it still doesn't work just use the manual way.
Sorry.
Click to expand...
Click to collapse
Yeah i assigned a drive letter to FAT32...
Also the FAT32 , was my first block allocated partition, the 2nd partition was EXT3... i will redo the whole process and recreate EXT4 instead.
"DATA2SD is working great for me" ... you mean "A2SD working great for me" ... right? unless i'm missing something else that i needed to run..
ps: I recalled, after it was not working, i took out the sd and put it back in the reader to open MiniTool, it showed EXT2 instead of EXT3 ( which i was sure i chose )... and what's weird is it was reporting used space like 41MB... so obvisouly, the ROM wrote something on it...
Formatting it again to EXT3, didnt delete the 41 Used space, but it did convert it back to EXT3 ...probably nothing but mentioning as well
QkSi1ver said:
Yeah i assigned a drive letter to FAT32...
Also the FAT32 , was my first block allocated partition, the 2nd partition was EXT3... i will redo the whole process and recreate EXT4 instead.
"DATA2SD is working great for me" ... you mean "A2SD working great for me" ... right? unless i'm missing something else that i needed to run..
ps: I recalled, after it was not working, i took out the sd and put it back in the reader to open MiniTool, it showed EXT2 instead of EXT3 ( which i was sure i chose )... and what's weird is it was reporting used space like 41MB... so obvisouly, the ROM wrote something on it...
Formatting it again to EXT3, didnt delete the 41 Used space, but it did convert it back to EXT3 ...probably nothing but mentioning as well
Click to expand...
Click to collapse
I suggest you start over, something seems to have gone wrong.
A2SD is where the apps are stored on the EXT partition.
DC2SD is where the dalvik cache is also stored on the EXT partition.
DATA2SD is where the entire /data partition on the phone is stored on the EXT partition of the memory card.
Partitioning the SD card with a FAT32 partition and EXT partition is done first, then you decide which one is for you. DATA2SD does have one or two issues, such as the risk of corruption - you'd then have to completely reinstall the ROM. A2SD and DC2SD are fine but I still found myself running out of internal memory.
i gave up and used ROM Manager to create my partition ...i couldnt set it to 1G because 512MB is maximum but it was painless to create.
it asked me to create a swap partition... i've read somewhere that swap partition is useless or barely used in newer android os? do you guys have any swap partition if so how big are they?
Also, did you move Dalvik cache to sd? isnt it slower on SD? i mean shouldnt dalvik cache be on RAM whihc i assume is faster than any external sd?
thanks for your insight
QkSi1ver said:
i gave up and used ROM Manager to create my partition ...i couldnt set it to 1G because 512MB is maximum but it was painless to create.
it asked me to create a swap partition... i've read somewhere that swap partition is useless or barely used in newer android os? do you guys have any swap partition if so how big are they?
Also, did you move Dalvik cache to sd? isnt it slower on SD? i mean shouldnt dalvik cache be on RAM whihc i assume is faster than any external sd?
thanks for your insight
Click to expand...
Click to collapse
I used the full DATA2SD, which includes Dalvik2SD.
ok so sorry for a double post but im having an issue partitioning.
32 gb card san disk brand new
primary Fat32 10gb
primary Ext2 rest of space
once mini tool is done it sats successful but shows the sd card as Bad disk?!?
is there somthing im doin wrong? is used this guide here http://forum.xda-developers.com/wiki/SD_card_partitioning
all help deeply appriciated
Acer Iconia Tab A110 rooted, Cwm, 4.1.2
Can you actually have a 22gb ext partition? This might be something to look into to see if you can do it.
Edit: this got me interested so I searched myself, yes you can but apparently it depends on the chosen block size and hardware limitations, so u may have an issue with either.
Sent from my Legend using xda app-developers app
alexhtclegend said:
Firstly, BlaY0 has a great tutorial on how to do this properly, I suggest you do that to learn something.
Secondly, I cannot confirm that this is 100% safe. BlaY0's method should be 99% safe, I don't know about this as it is all automatic. BlaY0's method is tried and tested, this is not. I only used this method as I had a new SD card and I was in a hurry (exams coming up ) and I didn't have time to remind myself of BlaY0's method, and CWM only allows you to create up to 512mb partition. Also, I had a new computer, and I don't have time to set up ADB all over again.
Anyway, this is a method for people who don't want to use ADB to partition their SD card for A2EXT or DATA2EXT (a.k.a. apps2sd, etc etc), and are using Windows. If you're running linux, you could use something like gParted to partition it, not sure about OS X though. This method will allow a Windows user to create an EXT partition on their SD card alongside the FAT partition.
1) Download and install Minitool Partition Wizard, from here.
2) Open the program and delete all partitions from the SD card (which you will have inserted into the computer using an adapter or something). DO NOT DELETE THE PARTITIONS FROM THE HARD DISK! MAKE SURE YOU KNOW WHAT YOU'RE DELETING. Oh, and make sure the SD card is backed up
3) Create a FAT32 primary partition. You decide how big you want it, but I'd advise you leave 1024mb (1gb) for the EXT partition.
4) Create an EXT2/EXT3/EXT4 (you decide) primary partition. Use up the rest of the space on the SD card.
5) Click assign/OK/whatever and wait for it to complete
6) You now have your partitioned SD card ready for an A2SD ROM!
7) You need to assign a drive letter to the FAT32 partition. Not sure about the EXT partition. At first I forgot to do this and my card didn't show up in Windows, though Partition Magic can still see it.
Like I said, do yourself a favour and use BlaY0's method here, but if you're lazy or you don't have time or ADB doesn't work anymore, use this.
Click to expand...
Click to collapse
Hahah! Thanks for you detail guide. It is so helpful for me!