After an hard reset, i've re-installed my apps, nothing too demanding i like it slim.
What happens now is the PPC wont turn off by itself!
i've worked the power settings in the menu,
worked it on the registry following some post here, but no sucess...
every time I receive an sms or call the phone wakes up and the backlight goes off but the phone stays allways on!!
HELP!!!!
This just started happening:
I restart my tilt. I push the power button and the display brightness gets brighter but the device does not turn off. I push it again, the device turns off but then I can't get it to turn back on without soft resetting! What the crap??!!
Any clue what is going on?
Thanks!
Alan
I am just a n00b, but it sounds like your power button got mapped to your brightness control somehow, and when the screen goes black, the device is not off, just brightness set to 0. When you soft reset, the unit just sets back to default. I am not proficient in mapping the buttons, but a quick search on the forum should help. I know that there are a lot of threads having to do with mapping keys.
Hi
I experience the same problem and strange enough after I downloaded a patch released by HTC for potential issue with blue tooth and the phone.
A soft reset does not solve the problem, instead a Sync with the PC (even not a full one) cure it for a period of 2-3 days.
I have the impression that it is more complicated than just a registry issue. For instance I can not run the TOM TOM any more.
The HTC support only suggested a hard reset that I did but for complicated reasons I was forced to restore a back up I had.
So I am still affected by this problem.
I did a hard reset and used spb backup to restore everything to the day prior. The last thing I remember installing was s2u2 0.99c which seems that it would mess with how the device responds to the power button. I'm going to post over there and see if there is a chance it was the culprit.
Alan
You have to disable directdraw in s2u2.
persiansown said:
You have to disable directdraw in s2u2.
Click to expand...
Click to collapse
It was and is disabled at least according to s2u2 settings. I did notice that for me in 0.99c DPAD was enabled but did not work.
Hi, I'm having a problem with the music playback of the media panel, which I'm 90% sure wasn't happening before. Basically what's happening is that when i leave the music track running the phone eventually goes into sleep mode after 1 minute and then the music stops playing. After i press the power button to wake the phone the music then continues from where it stopped.
The music will also stop playing when i press the power button to turn off the screen, I'm pretty sure it never used to do this.
I've tested music playing with windows media player and while the music does still stop when i press the power button to turn off the music, media player seems to keep the phone awake when i leave it alone so the track keeps playing.
I much prefer the media panel for playing music however, so does anyone know what is causing this or how to fix it?
I've checked power settings and done a couple of soft resets but the problem's the same.
Thanks for any help.
Power settings
please test this:
Powe settings
Advanced tab
Uncheck all
Test if this works.
masterflasher said:
please test this:
Powe settings
Advanced tab
Uncheck all
Test if this works.
Click to expand...
Click to collapse
tthat done work.
last week i have done 7hard rest in 3 days to find out whats wrong. i found that every time i try and change the file cache wising xperiatweaks or any other software, media panel stops playing while changing tracks. right now i left file cache to its default value and did not install sdtune up and ma mmedia panel done stop no more.
Yes that works but i don't want to have to alter power settings to listen to music. I've always used the same power settings and I'm sure this never used to happen before, the player used to stop the phone from going into sleep mode.
agent_47 said:
tthat done work.
last week i have done 7hard rest in 3 days to find out whats wrong. i found that every time i try and change the file cache wising xperiatweaks or any other software, media panel stops playing while changing tracks. right now i left file cache to its default value and did not install sdtune up and ma mmedia panel done stop no more.
Click to expand...
Click to collapse
I think my problem is a bit different, the media panel doesn't stop playing music between tracks it stops mid track when the phone goes into sleep mode.
r u using the old R1A rom??
if yes den yes it does that. if u turn of device it stopes play back while playing from windows media player, coreplayer and the mediaplayer inside tf3d. its a windows thing i think. in that old rom, xperia don go to sleep mode while playing songs from mediapanel even when power saving options in setting-power-advanced tab are on; allowing continiuse playback. but if u put device to sleep then playback stops.
if ur device turns off itself while playing from media panel. do a hardrest and only restore ur contacts. and then istall everything from start. should solve problem.
agent_47 said:
r u using the old R1A rom??
if yes den yes it does that. if u turn of device it stopes play back while playing from windows media player, coreplayer and the mediaplayer inside tf3d. its a windows thing i think. in that old rom, xperia don go to sleep mode while playing songs from mediapanel even when power saving options in setting-power-advanced tab are on; allowing continiuse playback. but if u put device to sleep then playback stops.
if ur device turns off itself while playing from media panel. do a hardrest and only restore ur contacts. and then istall everything from start. should solve problem.
Click to expand...
Click to collapse
I'm using the R2A rom. I really don't want to do a hard reset again, only as a last resort.
I managed to solve the problem by uninstalling the media panel and then reinstalling it. Now it doesn't go to sleep mode while playing even with the power options set to sleep after 1 min.
Thanks to everyone who tried to help.
Was same problem, but i unchecked autopoweroff and all become ok.
But i remember that sometimes panel worked and with checked autopoweroff.
This is bug, i think...
Ethermind said:
Was same problem, but i unchecked autopoweroff and all become ok.
But i remember that sometimes panel worked and with checked autopoweroff.
This is bug, i think...
Click to expand...
Click to collapse
Yeah it is a bug, uninstall the media panel and reinstall it. You can find the cab on these forums. That way the media panel will override the auto power off while it's playing music.
It worked for me.
hi guys
suddenly I have the same problem!!
If I listen to music in the media pannel the music stops after every track e.g. I listen to one track and then I need to press the power button to turn the screen on before it starts the second track
what is the better thing to do? uninstall media pannel and re-install or change the power settings?
thx for your help
Same
Yeh, I have this problem it doesn't always happen though, but it has been there since R1A and even now on R2A_10 it still happens. Sometimes a restart stop it happening but it's kinda annoying having to press the power button twice to get it to play again when it stops mid way through a track.
I will reinstll nd fix when I can be bothered but at the moment I am using Media Player with voice command to play my music, just need to get tht sortd properly.
Any news regarding this problem?
Neither uninstalling/reinstalling MediaXperiaPanel
nor uninstalling SD tuneup or setting back the file caching value to default (Auto) helped.
same here
music stop playing when backlight off
i hv the same problem b4...but after i used sktools...under tune up options for system memory and speed...restore the AC resuming suspend timeout and battery resuming suspend timeout back to default which is from 1 to 60...the problem gone...
dun know 4 exact though..found it after experimenting...
Hi i have a few issues on my diamond. I hope you guys could help..
1st issue: lately my diamond keeps on resetting by itself.
2nd issue: later I've learned that when I record my voice using the software within the ROM, I don't hear anything but when I record my voice using my htc headset/earphones there is a sound.
What I did was:
This day I've flashed a new rom (Energy Rom) into my Diamond. It works ok then I flashed the Radio (Radio_1.13.25.24). I was able to use my diamond for a few hours.
Now..
3rd issue: My diamond is not powering on..
What i did before this happened was...
I pressed and hold the power button for about a few seconds so the ShutXP would pop up and I could soft reset my diamond.Before I clicked the soft reset button, I was checking out all the functions of it. then i clicked, a little icon,which is the Setup Timer Action. Here's the setup:
Action: Turn Off Pocket PC
In: (i don't exactly have seen the time indicated)
As curious as i am, I Clicked the Set Action button. It did shut my diamond off. Then I tried turning it on, but all it was doing was vibrate and the screen was black. At first I was hearing the start up sound a few times but later it didn't hear it anymore. I plugged in the charger but there's no white light on the circle button which used to have a light on the borders of the circle button when plugged in the usb cable. I tried pressing the power button plus the Volume down so the bootloader would appear but it did not. What shall I do?
Are you sure that the screen working because the phone vibrate and play the startup sound so if think its the screen that have som serious problem !!
HELP
I also flashed a new rom (Energy Rom) into my Diamond before.
It cannot run window mobile6.5.........how can I do???
I cannot connect to PC .......
I recently also had a similiar problem, after attempting a flash of the Rom, the ROM update stopped halfway through and reported that it had lost connection to the device....
The whole phone would not vibrate/power on, nothing - no glowing ring around the middle button to indicate it charging at all.
I had to return to the repair centre and somehow they didn't notice that I had modified the firmware and replaced the whole phone for free citing a hardware issue ...
Doesnt sound good if you cannot hard reset the device
HI every body, I have a problem and I'm asking for help
a while back my HTC HD7 felt in the sea. I managed to get it dried and fixed and it worked fine
but every now and then the screen goes black. normally i fix the problem by taking the battery out
the problem happened again a few days ago, and the screen won't turn on, when I turn the phone on I see the backlights turning on and the touch work fine and I can hear the keys and the unlock screen sound, but can't see anything
I tried to do a hard reset but the volume up key is not working so I can't access the hard reset menu.
my question .. is the a software to do a hard reset via PC. or can I use the headphone volume keys instead of the device ones???
I'm running WP 7.8 official, and a window 7 on PC.
please any help is appreciated ...
thanks