Related
I just got my unlocked AT&T Tilt, I ran the HardSPL which completed successfully. I then flashed using dutty's Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid_V2_1_65.14.06_CubeV2. Everything is working fine (gps, wifi, sound etc) except for the camera, when I try to start the camera nothing happens it just sits there on the multimedia screen the video camera doesnt work either. I checked task manager and there is no process running that I can associate with the camera. I tried a few other radio versions and cooked roms all gave me the same problem. Any help would be greatly appreciated.
u hard reset
hi
I have the same problem...
let's me know if you solve...
I try to udk rom...but tilt camera is black!
Same problem for me
try a 1.65.x.x radio and see if that helps.
also try flashing another rom and see if the problem goes away or not?
I have done the hard reset if by you mean sticking the stylus into the hole beside the mini usb port. I have tried a few 1.65 radios, I didn't know if I could use any under version 1.65 since it's running wm 6.1. Although I noticed a few tilt users seem to be running 1.27.* with duttys 6.1 rom, I didn't want to try it without checking with xda first.
I have tried 3 more roms and radios tonite but I still can't get the camera to start. I tried an older wm 6.1 dutty rom that included 1.58 radio and the new l26 release. I keep trying combinations that others seem to be using as evidenced by their signatures but even then it still wont work. Is there somewhere else I should look?
I just flashed my Diamond with the: RUU_Diamond_HTC_NOR_2.03.409.1_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship.exe
I'm an norwegian that's in the US studying, so they only gave me the norwegian version. Anyways, everything worked fine until flash, but now my phone refuses to register on the network (AT&T)!
Took the sim-card back to the at&t nokia phone, worked the first time...
I really wants to use my Diamond instead of the crappy nokia, but it would be a shame to downgrade to 1.93 (which worked just fine...).
Someone, please have a solution for me?
simply install a new radio....try 1.00.25.07 that seems to be the only quadband radio..
(you have to flash an hspl before)
It's stuck on 0% and won't continue... Tried several roms :-/
no service?????
is there a soution to this no network problem
THERE IS A CROSS IN THE RECEPTION BAR AND WHEN YOU DIAL OUT IT SAYS "OPERATION FAILED"
any replies appreciated
Quite bad if the official RUU more or less bricks the device, at least turns into just a little computer
It screwed up my Diamond aswell The gprs is completely dead, been up all night trying to fix it, several hard resets etc, nothing helps... if it was a cooked rom I could tolerate it but official roms screwing up our phones this easily pisses me off.
Mine worked again, with the old 1.93 rom!!
What the hell did they do to 2.03? I suppose the radio rom is different at least... But I couldn't change to the old radio when I had 2.03, tried using the HardSpl...
Is it possible to flash _once_ with everything from 2.03, but the 1.00.25.05 radio (which is the one from 1.93)? Doing it sequentually doesn't work.
So what I did, as the final solution:
Flash with stock 2.03 rom
HardSPL
Flash with 1.05.25 radio
Works perfect!
Hmm i did the other way round with my o2 XDA Diamond (1.93 Stock)
1. Hard SPL
2. New Radio Rom (1.09.25.23)
3. 2.03 official Ger HTC Rom (without vendor lock)
works great as well
I've seen this issue a couple of times too. With 1.93 as well as with 2.03. Did not figure out what was the cause but never had a chance to bring the device back to life with some uninstallation or radio flash. I always went back to the SPB Backup from the night before it stopped working propperly.
Hi everyone,
Used cooked roms for a while now, used to use them on my tytn as well.
I have been having such a bad time with my touch HD, i thought it was time to ask what's going on with you lot.
Basically, my touch HD has been running so slow for a while now, that it can even be hit and miss if i answer a incoming call. It even takes 2/3 rings before the ringtone starts up!
I have used miri's wm6.5 v16, but recently updated to he's manilla 2.5 ROM to see if that improved things, it hasn't.
I have radio 1.14 installed along with 1.56oli.
Could i be doing something wrong or is there software out there i have installed that is restricting my touch hd?
Battery life aint too bad so i can't really see it being that.
Any help would be great, my phone is angering me! haha
many thanks for any help!
stuart
stuartturrell said:
Hi everyone,
Used cooked roms for a while now, used to use them on my tytn as well.
I have been having such a bad time with my touch HD, i thought it was time to ask what's going on with you lot.
Basically, my touch HD has been running so slow for a while now, that it can even be hit and miss if i answer a incoming call. It even takes 2/3 rings before the ringtone starts up!
I have used miri's wm6.5 v16, but recently updated to he's manilla 2.5 ROM to see if that improved things, it hasn't.
I have radio 1.14 installed along with 1.56oli.
Could i be doing something wrong or is there software out there i have installed that is restricting my touch hd?
Battery life aint too bad so i can't really see it being that.
Any help would be great, my phone is angering me! haha
many thanks for any help!
stuart
Click to expand...
Click to collapse
have you tried flashing back to stock http://forum.xda-developers.com/showthread.php?t=501583&highlight=RUU+blackstone rom?
no, ok, i will take a look at doing that then.
Will i have any issues other than the one stated about hardspl with going back to stock?
If i were to install this, would i then be able to try cooked ROM's again or would i likely see the same as what is happening now? (slow device)
Thanks for the link btw
stuartturrell said:
no, ok, i will take a look at doing that then.
Will i have any issues other than the one stated about hardspl with going back to stock?
If i were to install this, would i then be able to try cooked ROM's again or would i likely see the same as what is happening now? (slow device)
Thanks for the link btw
Click to expand...
Click to collapse
i am well experience with USPL but nil with HSPL, i have been flashing back and forth stock and any latest Manila 2.5xxxx ROMs using USPL. you can search HSPL thread and look for ways in order for you to flash stock rom and reflash cooked roms.
It sounds like you've correct SPL for rom your using, i.e. SPL 1.56.Olinex, so it shouldn't be a problem with HSPL. You've also tried a different rom which also didn't fix your issue so I'd suggest what jigners said above and restore stock SPL & rom, then re-use dummies guide before flashing cooked rom again.
Alternatively check on Miri thread incase there are issues with his latest rom(s)? If so, there are plenty of other chef's and alternative cooked roms to try before you try restoring stock
maybe you want to try kwbr's Topix rom, it's wm6.1 and fast
I would say go back to stock ROM and start all over again.
Good combo is:
SPL 1.56
EnergyROM
Latest radio is a bit disappointing for me so i am on 1.14.25.24 with its rilphone.dll
Remember to flash with no memory card inside and to do a hard reset after the flash
By the way, have you hard reseted your device after flashing a new rom?
If not then do the hard reset for 2/3 times and observe the performance.
Furthermore, remove the SD card from the device and check the same. Defective SD card simulates the same problem because system requires lot more time to access it.
OK, i have gone back to stock firmware (well most recent offical release anyway)
All seems ok at the moment, it's been up and running for a couple days smoothly now.
I will take a look at the dummies guide and get back to cooked soon.
And yes, i do a hard reset everytime i have flashed, but only, i will try that next time i put cooked ware on the phone. (hopefully later today).
thanks for all the help,
Hi All,
I have used the search function - but ended up getting confused.
I have a Touch HD that I bought in January of this year (2009) from Mobiles.co.uk (Carphone Warehouse) and is on the O2 network (UK).
I have been using Dutty's ROMs (both 6.1 and 6.5) for months now - and have always used USPL when flashing, using the SD card method.
Over the past 3 days, my HD has been playing up.
When it started, I was using Dutty's R7. The radio was 1.14.something.something. The device was working perfectly, and I was really happy with the ROM and the way the phone was working. I had installed NO other applications with the exception of a different taskbar and obviously SDKCerts.cab
First of all, HTC Sense stopped working - it would cycle between "Loading HTC Sense" and "Tap here to launch HTC Sense"
Then, when rebooting the device, it just hung on the "Smart Mobility" screen. I left it in case it just needed a while to boot, but nothing.
I had no other option than to hard reset.
It worked OK for a few hours, but then HTC Sense started to crash again. So I flashed a new ROM - Lost in Asia or whatever it is called.
Same symptoms.
I flashed Dutty's R7 back and also the new 1.17 radio.
No joy.
The phone also hangs for ages on the Smart Mobility screen - perhaps a full minute where as before, it used to be no more than 15 seconds or so.
The following is displayed on the "Smart Mobility Screen"
1.17.25.09
52.69.25.37H
1.59.Dutty
The bootloader screen (before running USPL) shows the following:
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) V6
So the question I'm asking - is... Is my phone suffering some kind of hardware malfunction, or is this a known and fixable fault that I somehow have caused?
If the phone looks like it is malfunctioning, how would I go about returning it to stock so that the CPWH repair centre do not know it's had an unofficial ROM installed?
I'd like to add that whilst I'm very PC literate, I'm no programmer and a lot of the stuff here is alien to me hence my confusion - I just know how to flash a new ROM etc.
Thanks to anyone that takes the time to help me - I'd be really thankful to anyone that helps me sort this - be it tell me how to fix the device, or tells me to take it back!
Thanks in advance & Regards,
Chris.
Will D/L and flash Dutty's R0 Holy Grail ROM and see if that makes a difference...
If you've been using uspl than it will still be the stock spl and thus you could try to load the stock rom from htc.com specially designed for the touch hd(blackstone). I've read and heard from a lot of people that after flashing several roms and even hard resetting afterwards, some bits and pieces stay behind and flashing an original stock rom will undo this. I don't think it's a radio issue. And another big thing if you use dutty R7 that's a 1.56+ rom so you should have the right uspl olinex software to load these roms, if you used older software then problems with colouring and other things will appear.
a1gp said:
If you've been using uspl than it will still be the stock spl and thus you could try to load the stock rom from htc.com specially designed for the touch hd(blackstone). I've read and heard from a lot of people that after flashing several roms and even hard resetting afterwards, some bits and pieces stay behind and flashing an original stock rom will undo this. I don't think it's a radio issue. And another big thing if you use dutty R7 that's a 1.56+ rom so you should have the right uspl olinex software to load these roms, if you used older software then problems with colouring and other things will appear.
Click to expand...
Click to collapse
Thanks for the quick reply.
So is it perhaps better to revert to the original ROM before flashing a cooked ROM? I always Hard Reset twice after flashing as understand this helps.
OK - so the 1.56+ situation - I was under the impression that using the latest USPL (2.5) when flashing was OK? I have never had the colour problem... but perhaps if I'm flashing wrong then these problems could be to do with this?
Thanks again...
Chris
The Sense Manila has known bug that you need to press home to load it (sometimes).
For you case, I would suggest you to clean up your SD Card.
there may be several file that cause your system to freeze.
So, format your SD, hard reset.. and cross fingers.
Yes, It is better to revert to the original rom once in a while before flashing a new rom, if u used the latest uspl and the colours are ok, then you've done that right and it will probably be bits and pieces of old flashed roms floating around on the device.
Best to revert to stock rom and hard reset twice.
Afterwards flash the rom u want. If everything works again. U could hspl instead of uspl, hspl is more stable if u ask me. And you can go back to stock spl if you have waranty issues. there's a tut on that to in the rom section.
mcdull said:
The Sense Manila has known bug that you need to press home to load it (sometimes).
For you case, I would suggest you to clean up your SD Card.
there may be several file that cause your system to freeze.
So, format your SD, hard reset.. and cross fingers.
Click to expand...
Click to collapse
I forgot to mention - that was one of the things I did. Previously, I had loads of email folders from all the ROM installs.
Now I have a folder containing the useful CAB files that I need, and the ROM image file. Thats it.
It's only a 1gb card as my 8gb card gave up the ghost.
Thanks for the suggestion though and my apologies for not mentioning this in the initial post.
From reading the Dummies guide, am I right in thinking that in order to use a 1.55+ ROM (such as Dutty's Holy Grail R0) I only need to run USPL and then flash (as opposed to flash a newer SPL) as my stock SPL is already 1.54?
a1gp said:
Yes, It is better to revert to the original rom once in a while before flashing a new rom, if u used the latest uspl and the colours are ok, then you've done that right and it will probably be bits and pieces of old flashed roms floating around on the device.
Best to revert to stock rom and hard reset twice.
Afterwards flash the rom u want. If everything works again. U could hspl instead of uspl, hspl is more stable if u ask me. And you can go back to stock spl if you have waranty issues. there's a tut on that to in the rom section.
Click to expand...
Click to collapse
Thanks for this - I didnt realise the device would retain bits and bobs, and you may well be right in that things are getting corrupted in there!
Which is the best stock ROM to flash - is there a link to one? I looked on the Wiki and there seem to be loads... which will work on a UK T8282?!
Thanks again!
Chris
constablechris said:
I forgot to mention - that was one of the things I did. Previously, I had loads of email folders from all the ROM installs.
Now I have a folder containing the useful CAB files that I need, and the ROM image file. Thats it.
It's only a 1gb card as my 8gb card gave up the ghost.
Thanks for the suggestion though and my apologies for not mentioning this in the initial post.
From reading the Dummies guide, am I right in thinking that in order to use a 1.55+ ROM (such as Dutty's Holy Grail R0) I only need to run USPL and then flash (as opposed to flash a newer SPL) as my stock SPL is already 1.54?
Click to expand...
Click to collapse
what do you mean hang for age?
1 minute is nothing if it turns out boot up.
There are chances that the nand flash needs to refresh and wasted some times. But it won't be forever.
constablechris said:
Thanks for this - I didnt realise the device would retain bits and bobs, and you may well be right in that things are getting corrupted in there!
Which is the best stock ROM to flash - is there a link to one? I looked on the Wiki and there seem to be loads... which will work on a UK T8282?!
Thanks again!
Chris
Click to expand...
Click to collapse
there's an original rom on htc.com for blackstone just use that one.
hope it will turn out right for you
I thought I'm the only one who had this problem. Last Sunday my blackstone started to freeze on the smart mobility screen too. I flash 3 different roms because I thought its an rom issue with no luck. On Monday it even managed to hardreset itself after I waited for about 15 min in the smart mobility screen.
After that I flashed a stock rom and it seem to be fine by now.
But now I will flash a custom again, the stock one is so 6.1
Before i put back the original spl and my ROM that i got with the phone i thought i should ask if anyone have an idea of what has gone wrong with my phone.
Right now i have HSPL on my phone, i think the name is 1.56 olinex, my radio is 1.14 and my ROM is kwbr topix 3.5 WM 6.1
Over the last months i have tried at leas 20 different cooked ROMS but the always end up with some kind of problem that i did not have before. The phone hangs, the wifi dont work, i can have a ROM on for a week without a problem, sometimes just an hour.I have read every thread there is about it, but i dont find any solution. I do perform task 29 prior to flashing, i have flashed back my original ROM, downloaded from HTC and tried to install a cooked ROM after that, but it doesnt help, the problems are the same.
I can mention that i dont have those problem when i have my orignal ROM on( the one that i have downloaded from HTC).
I would be very glad if anybody could help me cause i dont want my stock ROM back, its so boring.
Thank you for listening.
Forca
did you perfom 2 hard resets after flashing?
Flash a stock rom and see if that helps..
alchopop said:
great, so whats the actual problem?
Click to expand...
Click to collapse
The biggest problem, in my opinion is that the phone hangs, (turns off itself) and the wifi dont work. But maybe its just something that happens to everybody that is not using the stock ROM or am i wrong there.
Forca
alchopop said:
did you perfom 2 hard resets after flashing?
Click to expand...
Click to collapse
Yes, sometimes 3
mwaldi3 said:
Flash a stock rom and see if that helps..
Click to expand...
Click to collapse
Just to make things clear here, when everybody it talking about that it could help flashing a stock rom before you flash a custom rom, do you then mean install the rom that you download from HTC, or a stock rom that you can find in the forums here. The thing is with the stock rom from HTC you dont have to put the phone in its bootloader to flash. If the answer is that i should flash a stock rom that i can find here in the wiki, what rom should i use then, there are like 30 different ones.
Forca
Here is an other question about stock ROMS. Does anybody know if there is a stock ROM with color icons and the my location function? Do i have to have HSPL or USPL on my phone to but a stock rom on it, or does it work with the original SPL.
Forca
I would recommend performing a task 29, then flashing a stock rom from the wiki on these forums. Once flashed then reflash a custom rom. Let us know how you get on. Also, not to point out the obvious, ensure you having matching SPL with rom
Fallen Spartan said:
I would recommend performing a task 29, then flashing a stock rom from the wiki on these forums. Once flashed then reflash a custom rom. Let us know how you get on. Also, not to point out the obvious, ensure you having matching SPL with rom
Click to expand...
Click to collapse
When i set my phone to bootloader it says: SPL-l.56.olinex and the ROM i am using is :Topix 3.5 WM6.1 Manila 2.1 Sense weather.Found here; http://forum.xda-developers.com/showthread.php?t=592632.How do i know if they are compatible? What ROMS can i use and what ROMS can i not use with my current SPL.
Forca
Forcavitale said:
When i set my phone to bootloader it says: SPL-l.56.olinex and the ROM i am using is :Topix 3.5 WM6.1 Manila 2.1 Sense weather.Found here; http://forum.xda-developers.com/showthread.php?t=592632.How do i know if they are compatible? What ROMS can i use and what ROMS can i not use with my current SPL.
Forca
Click to expand...
Click to collapse
Its wm6.5 so would have a base of 1.56+ which is compatible with your SPL. All roms based on 1.56+ are compatible with HSPL 1.56
As I mentioned earlier, try a task 29 and restore stock rom from wiki, then reflash custom rom. Also, try and make sure that your radio and rilphone match. Should improve signal/reception and possibly performance
Fallen Spartan said:
Its wm6.5 so would have a base of 1.56+ which is compatible with your SPL. All roms based on 1.56+ are compatible with HSPL 1.56
As I mentioned earlier, try a task 29 and restore stock rom from wiki, then reflash custom rom. Also, try and make sure that your radio and rilphone match. Should improve signal/reception and possibly performance
Click to expand...
Click to collapse
Thank you for helping a noob out here One more noobish question, how do i know if the rilphone and the radio match?Right now i have the radio 1.14 and i found this cab http://forum.xda-developers.com/showthread.php?t=610927, i am not sure if the match, but if the dont what do i look for when i want to download the rilphone file?
Hi. Seems like the only thing you haven't tried is the reapply the HSPL. I've heard that it can sometimes get screwed up and this may account for the problems you're having. Obviously applying the HSPL is risky because if it goes wrong you have yourself an expensive waper weight. Good luck.
Just to get it right, when i flash a stock ROM do i have to wait until its completely installed(i mean booting up installing windows, setting time and date), until i flash my custom ROM or can i just pull out the battery when the smart mobility shows up
Forca
Hmmm.... I'm using USPL with no problems, so it's not necessary to have HSPL on your phone (depending on ROM).
I used USPL with Topix 3.5 WM 6.1 weather sense, so there should be no problem too.
Normally I do HR when ROM shows alignment screen.
Ah, yes... and I flash stock ROM from HTC site....
Bodisson said:
Hmmm.... I'm using USPL with no problems, so it's not necessary to have HSPL on your phone (depending on ROM).
I used USPL with Topix 3.5 WM 6.1 weather sense, so there should be no problem too.
Normally I do HR when ROM shows alignment screen.
Ah, yes... and I flash stock ROM from HTC site....
Click to expand...
Click to collapse
So in other words it could work to flash my old original rom with the original radio on, undo my HSPL to the original SPL, then get USPL on the phone and flash Topix 3,5?
Forca
Fallen Spartan said:
I would recommend performing a task 29, then flashing a stock rom from the wiki on these forums. Once flashed then reflash a custom rom. Let us know how you get on. Also, not to point out the obvious, ensure you having matching SPL with rom
Click to expand...
Click to collapse
Alright i did what you recommended last night; flashed swedish stock ROM with radio 1.13, performed task 29, flashed Topix 3.5 with Windows 6.1 and sense weather, hard reset 2 time.
1 Wifi dont work, when i turn it on, it turns off, i then install the my location rilphone cab that i mentioned, and start up the phone again, now it works.
In the morning when i am writing this, it still works.
Will keep you updated once a day here.
Forca
Forcavitale said:
Alright i did what you recommended last night; flashed swedish stock ROM, performed task 29, flashed Topix 3.5 with Windows 6.1 and sense weather, hard reset 2 time.
1 Wifi dont work, when i turn it on, it turns off, i then install the my location rilphone cab that i mentioned, and start up the phone again, now it works.
In the morning when i am writing this, it still works.
Will keep you updated once a day here.
Forca
Click to expand...
Click to collapse
One more thing to try with the WiFi to make it work
Go to Comm manager in settings and make sure that WiFi is OFF
Switch OFF the phone (not soft reset but switch it OFF so that it shuts down all processes properly
Reboot the phone after 10 seconds
Switch on WiFi and see if that cures your problem
I have noticed sometimes after a soft reset my WiFi dosent work but switching off forces it reset itself
Hope that helps
alchopop said:
One more thing to try with the WiFi to make it work
Go to Comm manager in settings and make sure that WiFi is OFF
Switch OFF the phone (not soft reset but switch it OFF so that it shuts down all processes properly
Reboot the phone after 10 seconds
Switch on WiFi and see if that cures your problem
I have noticed sometimes after a soft reset my WiFi dosent work but switching off forces it reset itself
Hope that helps
Click to expand...
Click to collapse
Exactly what i have noticed too, Flashed a ROM a few days ago, wifi dont work, i dont do anything but turning the phone off and on again and i works.
Am i using the right rilphone for my radio 1.13? i used this one http://forum.xda-developers.com/showthread.php?t=610927 i use the rilphone my location cab in this post.
Mmmm.... maybe you should update to Radio 1.14... I was not satisfied at all with 1.13...
And most cooks have habit of cooking rilphone in their ROMs, but not radio...
So far I found that rilphone 1.14 works with almost any radio.
Bodisson said:
Mmmm.... maybe you should update to Radio 1.14... I was not satisfied at all with 1.13...
And most cooks have habit of cooking rilphone in their ROMs, but not radio...
So far I found that rilphone 1.14 works with almost any radio.
Click to expand...
Click to collapse
In fact the only reason i have radio1.13 on is cause it came along with my stock rom