hi!if i call a friend 5 times in a road,my tytn II,shows in call log 5 different calls to that contact.there isnt a program that can compact and organize the call log????thx!!
steph33 said:
hi!if i call a friend 5 times in a road,my tytn II,shows in call log 5 different calls to that contact.there isnt a program that can compact and organize the call log????thx!!
Click to expand...
Click to collapse
Hence the meaning of a call log...it tells you exactly who you called and when. I don't think there is a fix for this but you can always change the options in the menu to show you what you want....for example. Missed Calls, Outgoing Calls, ect....
I was quite annoyed with this in the beginning. On the original ATT dialer, if you press the d-pad down instead of going to call logs it will show you the last several calls before going to your contacts list. This is what I usually used when I was using this dialer. This in turn is compacting your call log to the calls the you dialed or just received.
Hope this helps
My Wizard (G3 running TNT WM6.1) all of a sudden does not receive incoming calls. There was a period for a while where I did receive most calls but would miss one occasionally, for unknown reasons. Now it seems that I miss all calls. I'll be getting 4 bars of reception, can make very clear outgoing calls, but when I test call from another phone, the Wizard never rings at all. If I call in to check voicemail, it will say that I have a few, but no notification ever pops up or ring to tell me I had a missed call or a voicemail.
What should I try to remedy this situation?
project86 said:
My Wizard (G3 running TNT WM6.1) all of a sudden does not receive incoming calls. There was a period for a while where I did receive most calls but would miss one occasionally, for unknown reasons. Now it seems that I miss all calls. I'll be getting 4 bars of reception, can make very clear outgoing calls, but when I test call from another phone, the Wizard never rings at all. If I call in to check voicemail, it will say that I have a few, but no notification ever pops up or ring to tell me I had a missed call or a voicemail.
What should I try to remedy this situation?
Click to expand...
Click to collapse
Try to flash a different Radio ROM. I'm using 2.47 and very pleased with it.
I had this same problem. I upgraded to 2.71.11 and haven't had it since
Hi,
I have a CDMA Touch from Telus Mobility in Canada.
The issue I am having is # rings with incoming calls.
I am using latest Jawbone Bluetooth headset, when I have an incoming call, I receive 2 rings and calls goes to voice mail.
I have called HTC Support and Telus support, they have no solution.
Is there a setting to modify the number of rings for incoming calls?
dave3211
If you're talking about the number of rings before the voicemail kicks in, yes there is a solution if your phone number is in Alberta or BC.
I dont know what Alberta or BC is...
but on my phone i do it like this...
Start->Settings->click phone->'Services(dono if it's called this, second tab)
There is a list, in that list there should be (again, dono the english word) 'forward to'
click Get Settings...
now u can set the number of secunds before it connects the call to voicemail..
with the intervals 5,10,15,20,25,30 seconds (at least with my phone provider)
hope this helps
thanks nisse thats very helpfull.
by the way forward to is call forwarding.
Excellent!!
NisseDILLIGAF said:
I dont know what Alberta or BC is...
but on my phone i do it like this...
Start->Settings->click phone->'Services(dono if it's called this, second tab)
There is a list, in that list there should be (again, dono the english word) 'forward to'
click Get Settings...
now u can set the number of secunds before it connects the call to voicemail..
with the intervals 5,10,15,20,25,30 seconds (at least with my phone provider)
hope this helps
Click to expand...
Click to collapse
Been trying to sort this out for years...nice one and thanks!!
NisseDILLIGAF said:
I dont know what Alberta or BC is...
but on my phone i do it like this...
Start->Settings->click phone->'Services(dono if it's called this, second tab)
There is a list, in that list there should be (again, dono the english word) 'forward to'
click Get Settings...
now u can set the number of secunds before it connects the call to voicemail..
with the intervals 5,10,15,20,25,30 seconds (at least with my phone provider)
hope this helps
Click to expand...
Click to collapse
Nice one indeed. thank you!!
3 rings delay in incoming call
Hi,
This might be due to another related issue:
There is delay of 3 rings before the diamond actually starts ringing.
i.e, after the caller has heard 3 rings, only then the diamond starts ringing, and by the time you pick the call, there will be many rings and it will go to answer phone as usual.
As soon as there is an incoming call, the light starts blinking. But there is a delay in the ringer/vibrate. You can try this out by calling from another phone.
This might be cause for your issue.
I too am having the same problem, and I'm searching for a solution. Maybe some cab which fixes the 3 rings dealy in incoming call... I'm sure there must be some such cab. Still going through the threads in the forum.
Could anybody please point us to a fix if you know...
Thks,
Sandeep
I've got the same problem on my touch pro..
It's even worse actually - I'm experimenting, but it seems like half the time the phone *never rings* when wifi is on and if it's asleep...
What the???
-mark
http://forum.xda-developers.com/showthread.php?p=2793104#post2793104
its a setting by your phone provider
yeah ive been testing the same problem with mine ringin from my nokia you hear it ringing out but the touch is still a sleap and bingo like you said 3 rings later it fires into action
ive also searched about - downloaded a new rom but still has the glitch
anyone sorted this out yet !! please post if you have a link to the cure
sandeepn81 said:
Hi,
This might be due to another related issue:
There is delay of 3 rings before the diamond actually starts ringing.
i.e, after the caller has heard 3 rings, only then the diamond starts ringing, and by the time you pick the call, there will be many rings and it will go to answer phone as usual.
As soon as there is an incoming call, the light starts blinking. But there is a delay in the ringer/vibrate. You can try this out by calling from another phone.
This might be cause for your issue.
I too am having the same problem, and I'm searching for a solution. Maybe some cab which fixes the 3 rings dealy in incoming call... I'm sure there must be some such cab. Still going through the threads in the forum.
Could anybody please point us to a fix if you know...
Thks,
Sandeep
Click to expand...
Click to collapse
I think that he's referring to the 3 second delay built into most phones. On earlier devices this was fixed by changing the polling time in the phone programming. (often referred to as the Slot Cycle Index). I haven't tried it on my Diamond as I haven't noticed that much of a lag.
Since I was thinking about it, I decided to try. I changed my SCI from 2 to 0.
I did look and found that I don't have that "Forward to" option in my phone settings. Probably a provider change.
I need someone's help real bad!!!!!!!!!!!!!!!
here is the scenario:
1. I got everything work just fine with this VOIP phone with Sipgate, Google Voice & Sipsorcery... I got everything working and receiving incoming & outgoing calls with no problems at all.. using Sipdroid as my ATA on my T-Mobile G1
2. now today after like a month when i getting ready to make a outbound call to a store it gives me a beeping noise that replaces the ringer then it never connects and hangs up.
3. now i never changed the settings on sipgate nor did I change the settings on sipsorcery...
4. I never had a problem til today and now i cant receive nor make calls.
5. So i went to sipgate and tried to dial out it said "Error 200 3" or with the pop up messages on the bottom right while signed into sipgate it had a message at the bottom saying "Line 1 Busy".
6. Since then i went into sipgate and erased everything also i did the same in sipsorcery and it didnt change the problem...
7. All im trying to do is make calls again without hearing this beep sound that replaces the ringer and making and receiving calls again...
Can Anyone please help me???? I really need it lol, i am frustrated to the max with this.
68 views and no answer?
come on, yall know how to make app for phones and all i am asking on how to correct a problem...
do anyone have a answer?
Upgrade to 2.2 with radio, but I am having a weird problem. Phone shows I am registered on ATT, and can make calls, receive texts and send texts, however receiveng calls is sporadic. Most of the time the phone does not show an incoming call. I find if I go to the settings menu and re-register on ATT I can receive a call or two, but then it stops. As I said however I can always make calls and send/receive texts. It always shows good signal and edge connection. Any Idea where to start troubleshooting.
What I have done:
Disable google voice in case this was causing problems.
Nand restore back to Cyanogen and flash old radio - Everything works
YES!!! I was having this crazy problem with receiving call also! In fact that's what I was searching for when I found your post.
My receiving calls were very sporadic... and the incoming calls would NEVER ring! I would see the incoming call on my display... but I would get NO sound, even with the sound rockers turned all the way up!
I went back to Cyan's ROM cause it was totally unacceptable.