Hi two days ago i decided to put the jachero rom on my g1 and it said i had to update the radio so i did then put the latest spl so i did and after i renamed the spl to update.zip and applied it. my phone got bricked and i cant apply the dreaimg.nbh to wipe everything and cant go to recovery and i dont know if it will never work again?? please heelpppp!!! oh yyeah and im 13.
what do you mean brick? which radio did you install and which spl did you install after that?
does your phone turn on at all?
um
i put the radio 2.22.6i and idk about the spl and it just says tmobile g1
Alanrocks15 said:
Hi two days ago i decided to put the jachero rom on my g1 and it said i had to update the radio so i did then put the latest spl so i did and after i renamed the spl to update.zip and applied it. my phone got bricked and i cant apply the dreaimg.nbh to wipe everything and cant go to recovery and i dont know if it will never work again?? please heelpppp!!! oh yyeah and im 13.
Click to expand...
Click to collapse
it seems like you're pretty bricked.
Please give more information on your procedure.
If you cannot boot into recovery (home + power) or the bootloader (camera + power) then it is most likely bricked. If you have insurance, just tell T-Mobile that your phone told you that there was an update available, and when you clicked OK, the phone restarted and then you were stuck at the G1 screen.
um
well i dont know anything how to flash cyanogen
on the jachero page it said get the latest spl so i updated and after that canot go into recovery
so i only have warranty no insurance
Alanrocks15 said:
well i dont know anything how to flash cyanogen
on the jachero page it said get the latest spl so i updated and after that canot go into recovery
so i only have warranty no insurance
Click to expand...
Click to collapse
if you dont even know what your putting on your phone, you kinda deserved it...
Use your warranty, tell them there was an over the air update and ur phone ran out of battery in the middle of it.... and read up/think before doing something like that again...
theres really nothing you can do now. You need to give us more detailed procedures if you want a second opinion
well
i did know what to do but since i already have the latest radio then i just put the spl and if i get another g1 if i already have the hard spl do i need to put the latest because igot the hard spl from another forum but since the jachero page told me to update it i did that maybe i dont have the latest radio but no since anymore and thank you i will tell tmobile i got a ota but didnt the ota thing stop like 3 weeks ago i dont think they will believe me that i just got an ota barely
Alanrocks15 said:
i did know what to do but since i already have the latest radio then i just put the spl and if i get another g1 if i already have the hard spl do i need to put the latest because igot the hard spl from another forum but since the jachero page told me to update it i did that maybe i dont have the latest radio but no since anymore and thank you i will tell tmobile i got a ota but didnt the ota thing stop like 3 weeks ago i dont think they will believe me that i just got an ota barely
Click to expand...
Click to collapse
So? Just say that you had your phone off for a few weeks cuz you went on vacation and chose to bring another phone for safety's sake, and when you got back, you turned on the phone and presto! OTA update...
Alanrocks15 said:
i did know what to do but since i already have the latest radio then i just put the spl and if i get another g1 if i already have the hard spl do i need to put the latest because igot the hard spl from another forum but since the jachero page told me to update it i did that maybe i dont have the latest radio but no since anymore and thank you i will tell tmobile i got a ota but didnt the ota thing stop like 3 weeks ago i dont think they will believe me that i just got an ota barely
Click to expand...
Click to collapse
1) Use full stops, 'cos that's near impossible to read.
2) No, hard SPL will not work you need Haykuro's SPL.
3) Your phone will only have bricked it you had the old radio OR you did not have a PVT board. Did you look in the bootloader before you flashed the new one? I'm guessing not.
4) Luckily there was a security (I think it was security) update that was just released, so they shouldn't qustion it.
ok sorry
Ithink the warranty will cover it
I would go with the OTA story especially since there was just an OTA update released that has been pushed to phones over the last few days. I know a few people who also didn't read up before they started flashing and they too bricked their phones however, the OTA story worked most of the time. This is really your only choice seeing that you don't have insurance on the phone. Good luck
Just use the OTA story again lol
Tmobile wont hassle you too much about it.
Make sure you download the Radio that Haykuro provided, flash it, then boot into the bootloader to make sure it reads properly. Also verify that you have a PVT board.
Put the update.zip with the SPL on your phone AND VERIFY THE MD5 CHECKSUM (you should do it with the radio too actually)
and continue to follow the proper directions.
If you brick after following that, use the OTA story again but stick to HardSPL lol
what is checksum and pvt board?
Alanrocks15 said:
what is checksum and pvt board?
Click to expand...
Click to collapse
PVT board is the board that won't brick when flashed with the Danger SPL. Just another design. You can check your board revision by booting into bootloader (camera+power).
md5 checksum is a special key that is tied to the file that is generated based on that file. If the file that you downloaded is corrupt or different compared to the original file, the md5checksum will be different, letting you know that you need to re-download the file or risk a brick.
help help help help
please somwbody help please...my g1 t mobile freeze in g1 screen...i can't power+camera, power+volumen down, no bootloader screen nothing, only freeze in g1 tmobile screen...
when press action botton and power a blue led come on but nothing happend...
somebody can help me with any information
jtag pin outs...or somenthing to solve this problem..i come from panama
help help help help
please somebody help please...my g1 t mobile freeze in g1 screen...i can't power+camera, power+volumen down, no bootloader screen nothing, only freeze in g1 tmobile screen...
when press action botton and power a blue led come on but nothing happend...
somebody can help me with any information
jtag pin outs...or somenthing to solve this problem..i come from panama
jommega said:
please somebody help please...my g1 t mobile freeze in g1 screen...i can't power+camera, power+volumen down, no bootloader screen nothing, only freeze in g1 tmobile screen...
when press action botton and power a blue led come on but nothing happend...
somebody can help me with any information
jtag pin outs...or somenthing to solve this problem..i come from panama
Click to expand...
Click to collapse
nothing you can do. its bricked. call tmo or get it replaced by whatever warranty you have
well im getting a replacement g1 and i wanna root it again but i dont wanna brick it and theres a post that is here on xda and its called
"how to root, flash recovery cyanogen, parition sd to fat , ext2 and 3 , how to flash radio nd spl and install jachero"
is this a good post?
Thanks guys this helped a lot wow its been almost 2 years so yea thanks a lot guys
Sent from my SGH-T959 using XDA App
Related
right i know how i bricked my G1
did spl before radio .. so the outcome is basiclly it hangs on the screen thing
i passed the phone down to my little brother so hes been using it for some time i ain been on the g1 scene for quite some time until yesterday he started ranting on bout me upgrading his system to the Hero ports
my main question was is there a way to recover this problem
or am i going to have to go tru my friends at t-mobile
thanks in advance
1) You posted in the wrong forum. How is this post in way Android Development?
2) Learn to use periods. It's hard to understand what you are trying to say.
...So you bricked your g1?
Sorry, nothing can be done.
shaji007 said:
right i know how i bricked my G1
did spl before radio .. so the outcome is basiclly it hangs on the screen thing
i passed the phone down to my little brother so hes been using it for some time i ain been on the g1 scene for quite some time until yesterday he started ranting on bout me upgrading his system to the Hero ports
my main question was is there a way to recover this problem
or am i going to have to go tru my friends at t-mobile
thanks in advance
Click to expand...
Click to collapse
Shaji... 1st off how is your little brother using a "bricked" phone? If it is bricked it can't be used let alone have the ROM updated to the Hero ROM's. Also there are several threads over in the " Dream android development " that should provide you with PLENTY of information that you seek... good luck with T-Mobile...
peace
...tell T-Mobile you got an OTA update and phone never booted past the first screen after. You're phone is bricked ,get a new one.
shaji007 said:
right i know how i bricked my G1
did spl before radio .. so the outcome is basiclly it hangs on the screen thing
i passed the phone down to my little brother so hes been using it for some time i ain been on the g1 scene for quite some time until yesterday he started ranting on bout me upgrading his system to the Hero ports
my main question was is there a way to recover this problem
or am i going to have to go tru my friends at t-mobile
thanks in advance
Click to expand...
Click to collapse
I did the same thing the night Haykuro came out with all his new stuff for that. I flashed SPL before radio, but I was able to fix it. I'll pull up the email I worked out with him, PM me for it.
Disconnect usb, take out the battery and plug it back it, connect usb, boot the phone into the recovery mode, go to the console.
Enter then type this: echo /dev/block/mmcblk0 > /sys/devices/platform/usb_mass_storage/lun0/file
You now can access to ur sdcard from your computer, download a rom, change it to "update". Reboot the phone again, now try to wipe and install the update. After you install the update, flash the radio first, then the SPL. Let me know how it works out for you.
thanks for all the information people
@shaji007 Your post is quite confusing, can you tell us what you did in order? Can the phone get in to recovery (power+home) or the bootloader (power+camera)?
@phuthanvinh If you brick you can't get in to recovery.
@lukekirstein You know how to bring bricked G1's back to life? This I gotta see...
right basiclly
i followed the guide how to downgrade root n hack etc
did all that
then upgraded to one of JF builds
then i was going to install the hero ports that have been flying around
however this is my fault i wasnt really concentrating and i upgraded the spl before the radio
so yea its bricked on there
i just thought xda might have a way of fixing it back up
getting it replaced with t-mobile is of course no problem but i dont want to go through the hassle
lukekirstein said:
I did the same thing the night Haykuro came out with all his new stuff for that. I flashed SPL before radio, but I was able to fix it. I'll pull up the email I worked out with him, PM me for it.
Click to expand...
Click to collapse
yea okay I don't believe you...If haykuro was able to fix it why hasn't he posted a fix? No why havent YOU posted a fix?
shaji007 said:
right basiclly
i followed the guide how to downgrade root n hack etc
did all that
then upgraded to one of JF builds
then i was going to install the hero ports that have been flying around
however this is my fault i wasnt really concentrating and i upgraded the spl before the radio
so yea its bricked on there
i just thought xda might have a way of fixing it back up
getting it replaced with t-mobile is of course no problem but i dont want to go through the hassle
Click to expand...
Click to collapse
Right, yeah, you're screwed. Just tell tmo that the update bricked it, but don't say bricked, just act dumb
I wouldn't hold out much hope for lukekirstein's unbrick method that no one has over heard about before...
I just got a new g1 and i was rooting it but forgot to install the new spl before flashing a build so i flashed the build and got a "cant symlink" error.
After that i figured out it was the spl so i flashed the new spl and it installed fine but when it said press home+back to reboot i just took out the battery...
Now I have to tried to boot the phone into recovery with home+power and camera+power and it still just remains on the g1 screen!
Please help!
Cant SYMLINK
First of all did you install the radio first? AND THEN THE SPL? or did u just install the SPL?
If you only installed the SPL then youre pretty much f****d and you need to go get a replacement device.
If you installed the radio first then the SPL then you should be ok just go back to recovery and reflash RADIO THEN SPL u can get them [here], but from what youre saying thats not the case.
If you do have to go to get a new device, it is free **at least mine was** I just said that i plugged it in the night before, it had been getting really hot and that when i woke up that morning it just wouldnt turn back on past the G1 boot screen. if you just got it you will be able to get away with saying "the phone said there was an update available, i downloaded the update and now it wont go past this screen" play it dumb and you should be ok.
Good luck, im hopin for the best, it sucks to have a brick lol i been there done that.
WHAT YOU NEED TO DO IS LOAD ANOTHER ROM ON YOUR SD CARD, PULL THE BATTERY, GO INTO RECOVERY, WIPE, AND APPLY THE ROM! that is assuming you can get into recovery?
If you can't get into recovery sounds like another brick in the wall.
supremeteam256 said:
If you can't get into recovery sounds like another brick in the wall.
Click to expand...
Click to collapse
[SINGING]
We don't need no education
We don't need no thought control
No dark sarcasm in the classroom
Teachers leave them kids alone
Hey! Teachers! Leave them kids alone!
All in all it's just another brick in the wall.
All in all you're just another brick in the wall.
[/SINGING]
DirectMatrix said:
[SINGING]
We don't need no education
We don't need no thought control
No dark sarcasm in the classroom
Teachers leave them kids alone
Hey! Teachers! Leave them kids alone!
All in all it's just another brick in the wall.
All in all you're just another brick in the wall.
[/SINGING]
Click to expand...
Click to collapse
LOL. Good one
sounds like a brick
i just re-read what you wrote and yeah..sounds like a brick. spl's are tricky mo-fo's. maybe next time you will remember it goes RADIO, THEN NEW SPL?!
as3k said:
First of all did you install the radio first? AND THEN THE SPL? or did u just install the SPL?
If you only installed the SPL then youre pretty much f****d and you need to go get a replacement device.
If you installed the radio first then the SPL then you should be ok just go back to recovery and reflash RADIO THEN SPL u can get them [here], but from what youre saying thats not the case.
If you do have to go to get a new device, it is free **at least mine was** I just said that i plugged it in the night before, it had been getting really hot and that when i woke up that morning it just wouldnt turn back on past the G1 boot screen. if you just got it you will be able to get away with saying "the phone said there was an update available, i downloaded the update and now it wont go past this screen" play it dumb and you should be ok.
Good luck, im hopin for the best, it sucks to have a brick lol i been there done that.
Click to expand...
Click to collapse
Im pretty sure i flashed the radio first but i forgot the spl and flashed the rom next... then i realized i didnt flash the spl and tried to flash it and it "successfully installed the update" so i pulled the battery out to reboot it and it just stuck at the g1 screen when i booted it... and no button combos worked to get into boot loader or anything like that...
but i called tmobile and they are sending me a new phone on tuesday lol
i dunno if i want to try it again =/
i thought i read somewhere that the newer phones brick easier? because of the new "board" or something
so do i
508bmartin said:
Im pretty sure i flashed the radio first but i forgot the spl and flashed the rom next... then i realized i didnt flash the spl and tried to flash it and it "successfully installed the update" so i pulled the battery out to reboot it and it just stuck at the g1 screen when i booted it... and no button combos worked to get into boot loader or anything like that...
but i called tmobile and they are sending me a new phone on tuesday lol
i dunno if i want to try it again =/
i thought i read somewhere that the newer phones brick easier? because of the new "board" or something
Click to expand...
Click to collapse
you thought the best way to reboot your phone...was by pulling the battery? even though the recovery said reboot by pressing Home+Back keys to do it, which would be infinately easier? Have you ever "rebooted" your PC by pulling the power cord? nvm dont answer that....
I would suggest you stay the hell away from the spl until you understand wtf your doing.
rebooting PROPERLY would have allowed the image to be written properly.
EDIT: LOL wow nvm this is a thread brought back from the dead......
So i got a new G1 after the previous one never got signal (took it to a shop and they sent me a replacement)
i downgraded to rc 29
rooted/put cm recovery 1.4 in
the most recent radio was already installed (62.50S.20.17H_2.22.19.26I)
flashed haykuro's spl.
then, as usual, it says "press home+back" to reboot.
so i did.
however, the phone is stuck at the white G1 screen. I tried to do reboot with home+power, and with camera+power, but both of those went to the G1 screen and stopped.
I can't see what's going on (adb logcat simply says -waiting for device-. is there another command?)
so should i wait on the screen, or did i make a mistake. If so, then where did i go wrong and how should i have done it?
If you can not get into recovery or bootloader, just set down, yell, smack yourself in your head and then take it back to the shop for another one cause you my friend BRICKED your phone. Another phone bites the dust, don't feel to bad I have done it before too
any idea how it happened? so i can avoid doing it again later?
Did you have a pvt board? If so then you are just a small statistical error. I have bricked a phohne before that have a pvt board, newest radio, all the requirements for it to work ,and the phone still bricked ,but it was around the release of cupcake so i told my friend to call tmobile and tell them he got an ota update and his phone wouldn't get passed the g1 screen, and they sent him another and the new spl flashed just fine on it
Not sure cause you said that the newest radio was already on there which would be the usual suspect, when you say it was already there do you mean before you downgraded to rc29 if so when you downgrade it also downgrades the radio and you have to flash it back on
not sure about the board - im assuming there's no way to check now?
and as long as you can "prove" (or lie, really) that the phone broke on its own, theres no limit as to how many replacements you can get, right?
...It downgrades the radio too?
well, theres my problem.
Anyway, thanks for the quick help guys
Yes it overwrites everything except a custom splash image but hey now you know, I would say that is what got you, when you get your new phone go into the bootloader and the first peice of info will say it is either a pvt or dvt board
If you just got your g1, chances are it did not ship with the latest update, none of the 3 I got like 2 months ago did so just say it was upgrading a ota update and froze and they will give you another one
Hello everyone,
I have a rooted g1 and I was putting on the 2.1 rom on my phone. I was following a guys instruction off of youtube but it totally messed my phone up. Now its stuck on the pitcure with the open box pointing a yellow arrow on the phone right next to it(the update screen), what do I do??? Thanks for your help.
You dont even have root then...If it shows what i think your taking about....You should follow this simple enough my little brother(7yr) could master it:
http://theunlockr.com/2009/08/22/how-to-root-the-mytouch-3g-or-g1-in-one-click/
no i have root access i already had about 5 other roms on there but this guy said that you need a radio update sign. the guys site is http://www.youtube.com/watch?v=QfPI9Qdagd0&feature=related
Sagz326 said:
no i have root access i already had about 5 other roms on there but this guy said that you need a radio update sign. the guys site is http://www.youtube.com/watch?v=QfPI9Qdagd0&feature=related
Click to expand...
Click to collapse
If you had root why did you flash the radio again?
That gives bricks applying radio after having root is pointless.
What are you trying to do?
i dont know im a noob if you dont know by know. well is there anything i can do???
Sagz326 said:
i dont know im a noob if you dont know by know. well is there anything i can do???
Click to expand...
Click to collapse
Just tell me everything you did, step by step.
ok first i put both of his zip files on my sd card then turned off my phone and turned it on with the home key, then i backed up my phone, then a factory wipe/reset, then applied the radio update, then tried to apply the other zip file but couldnt, so i rebooted my phone and now im stuck
Sagz326 said:
ok first i put both of his zip files on my sd card then turned off my phone and turned it on with the home key, then i backed up my phone, then a factory wipe/reset, then applied the radio update, then tried to apply the other zip file but couldnt, so i rebooted my phone and now im stuck
Click to expand...
Click to collapse
radio and spl?'
But you have to have a custom recovery image before you can flash either of those.
i think it was just a radio but not sure. but i followed that guys video step by step and now im in this position
yeah i have amonra
Sagz326 said:
i think it was just a radio but not sure. but i followed that guys video step by step and now im in this position
Click to expand...
Click to collapse
Ahh you might brick, you seem to have flashed the Radio made for HTC hero not G1....Notice the title: "How to get Android 2.1 on HTC Hero"
To use Hero 2.1 on G1 it shows it here @ XDA, you only needed Haykuro SPL and the 26I radio/
If rec mode is working then you arent brick or if you can get into bootloader.
how do i get in rec mode or bootloader
Hold down home when turning on the phone=recovery
Hold down camera button while powering on= bootloader
If you can't get into either one of those, likely bricked. I know with WM devices flashing a radio for another phone is one of the fastest ways to brick your phone, Android seems to be much more forgiving, so hopefully you will be lucky and if recovery and bootloader don't work, you can possibly get ADB to work.
If you don't figure out how to do this BEFORE you do it, you will likely brick your phone, if not sooner, soon enough. Doing it along with a video isn't enough to make sure you won't brick your phone.
Read through the steps of rooting, flashing a basic, stock ROM, do that a time or two, and then get into the more up-to-date stuff.
Your method of going about a new task is going to... well, it isn't going to work, unless you are really, really lucky.
i was rooting a friends g1, i missed a step n tried flashing a rom without having the danger spl installed first, i cant get into my spl menu by holding camera and power nor can i get into my recovery nor can i get into adb... my phone turns on and stays at the g1 logo... any advice?
bricked.. look in the development section for un-bricking guides... although it'll cost some money i think.. i'll look for one myself and post back with a link
edit: http://forum.xda-developers.com/showthread.php?t=576628&highlight=brick
or
http://forum.xda-developers.com/showthread.php?t=591048
maybe those could help... Good luck!
madunix said:
i was rooting a friends g1, i missed a step n tried flashing a rom without having the danger spl installed first, i cant get into my spl menu by holding camera and power nor can i get into my recovery nor can i get into adb... my phone turns on and stays at the g1 logo... any advice?
Click to expand...
Click to collapse
that is why i dont screw around with other peoples phones LOL
i just checked my sdcard that was in the phone, the update.zip file is the danger spl. im guessing i flashed that? but i dont get why that would brick anything.. the phone was rooted... but i had the factory recovery where u see that pic in the middle, i hit alt w? or alt s i forget what the instructions were i was following. soo its a brick huh? no way of getting through this one?
madunix said:
i just checked my sdcard that was in the phone, the update.zip file is the danger spl. im guessing i flashed that? but i dont get why that would brick anything.. the phone was rooted... but i had the factory recovery where u see that pic in the middle, i hit alt w? or alt s i forget what the instructions were i was following. soo its a brick huh? no way of getting through this one?
Click to expand...
Click to collapse
Just because the phone is rooted doesn't mean it is magical and can't be bricked. You have to have the latest radio before you can flash the danger SPL. Depending on which method you used(likely RC29 method) that radio would not be anywhere close to what is needed. And, yes, once you flash the danger SPL without the newest radio, you have a brick and no way getting back from it.
Hopefully your friend is understanding and it isn't a major disaster getting a replacement G1 for him.
Flash Danger SPL without Latest Radio = Bricked.
I hope that your friend can get a replacement without much complications, because that one is screwed.
You could give him your phone...
the phone already had the newest radio installed... it was a brand new G1.. =X did i still have to flash it with the radio on this forums?
madunix said:
the phone already had the newest radio installed... it was a brand new G1.. =X did i still have to flash it with the radio on this forums?
Click to expand...
Click to collapse
Most likely yes usually when something is brand new it was manufactured months ago. Its unlikely that it included the proper radio. try blaming your friend lol good luck!
madunix said:
the phone already had the newest radio installed... it was a brand new G1.. =X did i still have to flash it with the radio on this forums?
Click to expand...
Click to collapse
Brand new or not, most every root method has you downgrade to RC29, which takes you back to a radio that is about a year old now.