Database Develop

Bricked g1 help

Hi two days ago i decided to put the jachero rom on my g1 and it said i had to update the radio so i did then put the latest spl so i did and after i renamed the spl to update.zip and applied it. my phone got bricked and i cant apply the dreaimg.nbh to wipe everything and cant go to recovery and i dont know if it will never work again?? please heelpppp!!! oh yyeah and im 13.

what do you mean brick? which radio did you install and which spl did you install after that?
does your phone turn on at all?

um
i put the radio 2.22.6i and idk about the spl and it just says tmobile g1

Alanrocks15 said:
Hi two days ago i decided to put the jachero rom on my g1 and it said i had to update the radio so i did then put the latest spl so i did and after i renamed the spl to update.zip and applied it. my phone got bricked and i cant apply the dreaimg.nbh to wipe everything and cant go to recovery and i dont know if it will never work again?? please heelpppp!!! oh yyeah and im 13.
Click to expand...
Click to collapse
it seems like you're pretty bricked.
Please give more information on your procedure.

If you cannot boot into recovery (home + power) or the bootloader (camera + power) then it is most likely bricked. If you have insurance, just tell T-Mobile that your phone told you that there was an update available, and when you clicked OK, the phone restarted and then you were stuck at the G1 screen.

um
well i dont know anything how to flash cyanogen
on the jachero page it said get the latest spl so i updated and after that canot go into recovery
so i only have warranty no insurance

Alanrocks15 said:
well i dont know anything how to flash cyanogen
on the jachero page it said get the latest spl so i updated and after that canot go into recovery
so i only have warranty no insurance
Click to expand...
Click to collapse
if you dont even know what your putting on your phone, you kinda deserved it...
Use your warranty, tell them there was an over the air update and ur phone ran out of battery in the middle of it.... and read up/think before doing something like that again...
theres really nothing you can do now. You need to give us more detailed procedures if you want a second opinion

well
i did know what to do but since i already have the latest radio then i just put the spl and if i get another g1 if i already have the hard spl do i need to put the latest because igot the hard spl from another forum but since the jachero page told me to update it i did that maybe i dont have the latest radio but no since anymore and thank you i will tell tmobile i got a ota but didnt the ota thing stop like 3 weeks ago i dont think they will believe me that i just got an ota barely

Alanrocks15 said:
i did know what to do but since i already have the latest radio then i just put the spl and if i get another g1 if i already have the hard spl do i need to put the latest because igot the hard spl from another forum but since the jachero page told me to update it i did that maybe i dont have the latest radio but no since anymore and thank you i will tell tmobile i got a ota but didnt the ota thing stop like 3 weeks ago i dont think they will believe me that i just got an ota barely
Click to expand...
Click to collapse
So? Just say that you had your phone off for a few weeks cuz you went on vacation and chose to bring another phone for safety's sake, and when you got back, you turned on the phone and presto! OTA update...

Alanrocks15 said:
i did know what to do but since i already have the latest radio then i just put the spl and if i get another g1 if i already have the hard spl do i need to put the latest because igot the hard spl from another forum but since the jachero page told me to update it i did that maybe i dont have the latest radio but no since anymore and thank you i will tell tmobile i got a ota but didnt the ota thing stop like 3 weeks ago i dont think they will believe me that i just got an ota barely
Click to expand...
Click to collapse
1) Use full stops, 'cos that's near impossible to read.
2) No, hard SPL will not work you need Haykuro's SPL.
3) Your phone will only have bricked it you had the old radio OR you did not have a PVT board. Did you look in the bootloader before you flashed the new one? I'm guessing not.
4) Luckily there was a security (I think it was security) update that was just released, so they shouldn't qustion it.

ok sorry
Ithink the warranty will cover it

I would go with the OTA story especially since there was just an OTA update released that has been pushed to phones over the last few days. I know a few people who also didn't read up before they started flashing and they too bricked their phones however, the OTA story worked most of the time. This is really your only choice seeing that you don't have insurance on the phone. Good luck

Just use the OTA story again lol
Tmobile wont hassle you too much about it.
Make sure you download the Radio that Haykuro provided, flash it, then boot into the bootloader to make sure it reads properly. Also verify that you have a PVT board.
Put the update.zip with the SPL on your phone AND VERIFY THE MD5 CHECKSUM (you should do it with the radio too actually)
and continue to follow the proper directions.
If you brick after following that, use the OTA story again but stick to HardSPL lol

what is checksum and pvt board?

Alanrocks15 said:
what is checksum and pvt board?
Click to expand...
Click to collapse
PVT board is the board that won't brick when flashed with the Danger SPL. Just another design. You can check your board revision by booting into bootloader (camera+power).
md5 checksum is a special key that is tied to the file that is generated based on that file. If the file that you downloaded is corrupt or different compared to the original file, the md5checksum will be different, letting you know that you need to re-download the file or risk a brick.

help help help help
please somwbody help please...my g1 t mobile freeze in g1 screen...i can't power+camera, power+volumen down, no bootloader screen nothing, only freeze in g1 tmobile screen...
when press action botton and power a blue led come on but nothing happend...
somebody can help me with any information
jtag pin outs...or somenthing to solve this problem..i come from panama

help help help help
please somebody help please...my g1 t mobile freeze in g1 screen...i can't power+camera, power+volumen down, no bootloader screen nothing, only freeze in g1 tmobile screen...
when press action botton and power a blue led come on but nothing happend...
somebody can help me with any information
jtag pin outs...or somenthing to solve this problem..i come from panama

jommega said:
please somebody help please...my g1 t mobile freeze in g1 screen...i can't power+camera, power+volumen down, no bootloader screen nothing, only freeze in g1 tmobile screen...
when press action botton and power a blue led come on but nothing happend...
somebody can help me with any information
jtag pin outs...or somenthing to solve this problem..i come from panama
Click to expand...
Click to collapse
nothing you can do. its bricked. call tmo or get it replaced by whatever warranty you have

well im getting a replacement g1 and i wanna root it again but i dont wanna brick it and theres a post that is here on xda and its called
"how to root, flash recovery cyanogen, parition sd to fat , ext2 and 3 , how to flash radio nd spl and install jachero"
is this a good post?

Thanks guys this helped a lot wow its been almost 2 years so yea thanks a lot guys
Sent from my SGH-T959 using XDA App

HELP!!! Stuck at g1 screen!

I just got a new g1 and i was rooting it but forgot to install the new spl before flashing a build so i flashed the build and got a "cant symlink" error.
After that i figured out it was the spl so i flashed the new spl and it installed fine but when it said press home+back to reboot i just took out the battery...
Now I have to tried to boot the phone into recovery with home+power and camera+power and it still just remains on the g1 screen!
Please help!

Cant SYMLINK
First of all did you install the radio first? AND THEN THE SPL? or did u just install the SPL?
If you only installed the SPL then youre pretty much f****d and you need to go get a replacement device.
If you installed the radio first then the SPL then you should be ok just go back to recovery and reflash RADIO THEN SPL u can get them [here], but from what youre saying thats not the case.
If you do have to go to get a new device, it is free **at least mine was** I just said that i plugged it in the night before, it had been getting really hot and that when i woke up that morning it just wouldnt turn back on past the G1 boot screen. if you just got it you will be able to get away with saying "the phone said there was an update available, i downloaded the update and now it wont go past this screen" play it dumb and you should be ok.
Good luck, im hopin for the best, it sucks to have a brick lol i been there done that.

WHAT YOU NEED TO DO IS LOAD ANOTHER ROM ON YOUR SD CARD, PULL THE BATTERY, GO INTO RECOVERY, WIPE, AND APPLY THE ROM! that is assuming you can get into recovery?

If you can't get into recovery sounds like another brick in the wall.

supremeteam256 said:
If you can't get into recovery sounds like another brick in the wall.
Click to expand...
Click to collapse
[SINGING]
We don't need no education
We don't need no thought control
No dark sarcasm in the classroom
Teachers leave them kids alone
Hey! Teachers! Leave them kids alone!
All in all it's just another brick in the wall.
All in all you're just another brick in the wall.
[/SINGING]

DirectMatrix said:
[SINGING]
We don't need no education
We don't need no thought control
No dark sarcasm in the classroom
Teachers leave them kids alone
Hey! Teachers! Leave them kids alone!
All in all it's just another brick in the wall.
All in all you're just another brick in the wall.
[/SINGING]
Click to expand...
Click to collapse
LOL. Good one

sounds like a brick
i just re-read what you wrote and yeah..sounds like a brick. spl's are tricky mo-fo's. maybe next time you will remember it goes RADIO, THEN NEW SPL?!

as3k said:
First of all did you install the radio first? AND THEN THE SPL? or did u just install the SPL?
If you only installed the SPL then youre pretty much f****d and you need to go get a replacement device.
If you installed the radio first then the SPL then you should be ok just go back to recovery and reflash RADIO THEN SPL u can get them [here], but from what youre saying thats not the case.
If you do have to go to get a new device, it is free **at least mine was** I just said that i plugged it in the night before, it had been getting really hot and that when i woke up that morning it just wouldnt turn back on past the G1 boot screen. if you just got it you will be able to get away with saying "the phone said there was an update available, i downloaded the update and now it wont go past this screen" play it dumb and you should be ok.
Good luck, im hopin for the best, it sucks to have a brick lol i been there done that.
Click to expand...
Click to collapse
Im pretty sure i flashed the radio first but i forgot the spl and flashed the rom next... then i realized i didnt flash the spl and tried to flash it and it "successfully installed the update" so i pulled the battery out to reboot it and it just stuck at the g1 screen when i booted it... and no button combos worked to get into boot loader or anything like that...
but i called tmobile and they are sending me a new phone on tuesday lol
i dunno if i want to try it again =/
i thought i read somewhere that the newer phones brick easier? because of the new "board" or something

so do i

508bmartin said:
Im pretty sure i flashed the radio first but i forgot the spl and flashed the rom next... then i realized i didnt flash the spl and tried to flash it and it "successfully installed the update" so i pulled the battery out to reboot it and it just stuck at the g1 screen when i booted it... and no button combos worked to get into boot loader or anything like that...
but i called tmobile and they are sending me a new phone on tuesday lol
i dunno if i want to try it again =/
i thought i read somewhere that the newer phones brick easier? because of the new "board" or something
Click to expand...
Click to collapse
you thought the best way to reboot your phone...was by pulling the battery? even though the recovery said reboot by pressing Home+Back keys to do it, which would be infinately easier? Have you ever "rebooted" your PC by pulling the power cord? nvm dont answer that....
I would suggest you stay the hell away from the spl until you understand wtf your doing.
rebooting PROPERLY would have allowed the image to be written properly.
EDIT: LOL wow nvm this is a thread brought back from the dead......

Problem: Stuck at G1 Screen

I was running Super D 1.2, flashed to 1.4 earlier this week with no problems. Went to flash to 1.5.1 last night and had an issue.
When I rooted I used hardSPL and didn't touch the radio. To flash super D 1.5.1 I needed to get Haykuro's radio and Danger SPL.
I wasn't aware I needed the new radio first and that's where the problem started.
I put danger SPL and super D on my card, booted up in recovery (amon_ra's), did a nan backup, flashed danger, then tried to flash 1.5.1 and got this error:
e: can't symlink /system/xbin/bb/[
e: failure at line 59:
symlink /system/xbin/busybox SYSTEM:xbin/bb/[
Installation aborted
After I got the error, I hit reboot so I could put 2.22.19.26i radio on my phone, and bam, stuck on G1 splash screen no matter how I try to boot up.
It's my fault for not checking the radio, This is my second time flashing a new rom (I rooted my G1 a few weeks ago)
I took my sd out and put it on my comp, so I have access to my sd thru my comp. Is there anything I can put on there to try and boot up in recovery and fix this? I have a nan back up from last week and last night before I flashed anything.
thanks in advance

Like all the other post say, flash the radio before the spl. If you failed to read the instructions and can not boot into recovery or fastboot, you have a brick.

evilkorn said:
Like all the other post say, flash the radio before the spl. If you failed to read the instructions and can not boot into recovery or fastboot, you have a brick.
Click to expand...
Click to collapse
Just in time to get a nexus too. Yay, for timing!

hi,im new to this, so bear with me.if you had already updated your radio and spl before then you shouldnt do it again.i might be wrong,but once its updated you dont have to do it again.

fabman33 said:
hi,im new to this, so bear with me.if you had already updated your radio and spl before then you shouldnt do it again.i might be wrong,but once its updated you dont have to do it again.
Click to expand...
Click to collapse
No, you shouldn't have to, but did you check before (can't check now)? There have also been cases where you got a bad download or it didn't work right, this also causes bricks. And please don't be a jerk and blame haykuro for this, I know some people have

I guess I failed to follow instructions lol ...
So I can't put a previous rom or anything on my sd from my comp to try and boot into recovery?

fabman33 said:
,but once its updated you dont have to do it again.
Click to expand...
Click to collapse
http://bit.ly/5V0VMB

t0nnn said:
I guess I failed to follow instructions lol ...
So I can't put a previous rom or anything on my sd from my comp to try and boot into recovery?
Click to expand...
Click to collapse
Can you boot into recovery now?

Nah every time I try I just get stuck on the G1 screen

t0nnn said:
Nah every time I try I just get stuck on the G1 screen
Click to expand...
Click to collapse
Well, enjoy your brick. You can replace the mobo, or break into htc and take the machine they used to originally put android on it, connect it to your phone's jtag's and watch the magic. Of course the second option comes with heavy fines, lawsuits, and jail time. Or you could buy a new phone

Nice, i'm an idiot.
Can I send it to HTC to get fixed?

t0nnn said:
Nice, i'm an idiot.
Can I send it to HTC to get fixed?
Click to expand...
Click to collapse
No you can't, you broke the warranty by rooting in the first place :/
So, buy a new phone

bah! ...this sucks.
It be nice if they offered a service to fix them, for a charge of course.
Before I rooted I sent the phone to them to get some minor stuff fixed under warranty (which it was), but to be covered under warranty they said they had to make sure the damage wasn't user caused and the phone didn't have any aftermarket roms on it.
Guess i'll be shopping for a new one

t0nnn said:
bah! ...this sucks.
It be nice if they offered a service to fix them, for a charge of course.
Before I rooted I sent the phone to them to get some minor stuff fixed under warranty (which it was), but to be covered under warranty they said they had to make sure the damage wasn't user caused and the phone didn't have any aftermarket roms on it.
Guess i'll be shopping for a new one
Click to expand...
Click to collapse
No they do offer it for a charge, a $400 one

what? Do they cup the balls and give you a milkshake for that too?

t0nnn said:
what? Do they cup the balls and give you a milkshake for that too?
Click to expand...
Click to collapse
No they send you a new phone

t0nnn said:
what? Do they cup the balls and give you a milkshake for that too?
Click to expand...
Click to collapse
On special occasions they do.

So you have a bricked phone! Care to donate it to the 'i wanna play with the motherboard' charity? Lol

just a stab in the dark, can you get into recovery with the USB cable connected / or a wall charger plugged in? (Hold home and long press power)

How long should I hold it? I just tried connecting via usb and home+power for about a minute with no luck.
Should it be home+power, but only hold power for a while? And how long?

T-mobile G1(Dream110)-bricked : HELP :o)

Hi all,
have some problem with T-mobile G1.
In first, its not mine, but my friends.
He was trying to do ROOT + flash eclair rom.
But he was unsuccesfull.
I tell him, I will write here and maybe, if all goes fine, repair his G1.
I realy dont know, what all he was trying with it.
But when i get it to my hands G1 was stucked on showing logo T-Mobile G1.
So where can be problem? And how can i repair it? )
Now Im going to read all forums about G1, cuz I have it in my hands for first time.
So if anybody can help i will be happy )

MiTMaNeK said:
Hi all,
have some problem with T-mobile G1.
In first, its not mine, but my friends.
He was trying to do ROOT + flash eclair rom.
But he was unsuccesfull.
I tell him, I will write here and maybe, if all goes fine, repair his G1.
I realy dont know, what all he was trying with it.
But when i get it to my hands G1 was stucked on showing logo T-Mobile G1.
So where can be problem? And how can i repair it? )
Now Im going to read all forums about G1, cuz I have it in my hands for first time.
So if anybody can help i will be happy )
Click to expand...
Click to collapse
I can help, but need more info. Tell me about the process you used to root and flash.
What happens if you turn on the phone while holding down the home button?
How about if you power on while holding the camera button?

I can help, but need more info. Tell me about the process you used to root and flash.
Click to expand...
Click to collapse
In first, thx for answer
What I know(I asked owner of this bricked G1):
1)He make ROOT with GoldCard
2)After that he flash SPL
3)Flash this ROM: http://forum.xda-developers.com/showthread.php?t=598973
But not working, so he made point 2 and 3 again .. still dont work.. dont know if he tried it again..
What happens if you turn on the phone while holding down the home button?
How about if you power on while holding the camera button?
Click to expand...
Click to collapse
nothing =(
EDIT : Its realy firts time when I got Andorid phone in hand, I can repair bricked Raphael, but I realy dont know what with this and what all i need in my computer.

MiTMaNeK said:
In first, thx for answer
What I know(I asked owner of this bricked G1):
1)He make ROOT with GoldCard
2)After that he flash SPL
3)Flash this ROM: http://forum.xda-developers.com/showthread.php?t=598973
But not working, so he made point 2 and 3 again .. still dont work.. dont know if he tried it again..
nothing =(
EDIT : Its realy firts time when I got Andorid phone in hand, I can repair bricked Raphael, but I realy dont know what with this and what all i need in my computer.
Click to expand...
Click to collapse
I am guessing they flashed Haykuro's special (i.e. danger or death spl) since they wanted an eclair ROM. Furthermore, I am guessing they did not flash the updated radio before the SPL?
Either way, since nothing happens when holding home, or camera, I am sorry to say you have a brick.

Thx )
Yea, I know, its a brick, while Im reading all forums about bricked G1... but there must be way how to repair it =D

MiTMaNeK said:
Thx )
Yea, I know, its a brick, while Im reading all forums about bricked G1... but there must be way how to repair it =D
Click to expand...
Click to collapse
As of yet your options are to send it to HTC to have it fixed, replace the motherboard, or follow this thread
http://forum.xda-developers.com/showthread.php?t=591048
Maybe these guys will figure it out.

Thx for this link, Its last hope for my friends G1 =), or buy used broken G1 with good motherboard =)

In all the cases I've read about if you can't access bootloader and recovery then your phone is bricked for good, but if you can access at least one of them your phone can still be fixed

Its fully bricked. So Power+ Cam and Power + Home dont work, maybe they found the way how to repair it )

G1 Bricked (Not able to fastboot)

Hi everyone really sorry for opening a new thread for a G1 brick.
My G1 has stuck at the T-Mobile screen and on pressing Camera+Power i cant get into fastboot to restore using the .nbh file.
I am not able to get into recovery using power+home key also.
There has to be a way to get my dream back....
please please please help

JTAG or go for a replacement. I'm guessing it's a DangerSPL brick, right?

Danger SPL
Yes dude....
i have done this so many time.....
this time i forgot to update the radio first and this is stuck....
Someone should have a solution for this....
I read many thread which say use it as a paperweight...
I am not loosing hope....
XDA Member will have some solution.....

Maybe you should try to keep current on developments.
There is NOT A SINGLE REASON to use the deathspl.
As for your "poll"... what do you expect to learn from something like this? Do you realize that any numbers you get will be completely MEANINGLESS?

lbcoder said:
Maybe you should try to keep current on developments.
There is NOT A SINGLE REASON to use the deathspl.
As for your "poll"... what do you expect to learn from something like this? Do you realize that any numbers you get will be completely MEANINGLESS?
Click to expand...
Click to collapse
By adding the poll I am just trying to avoid post which says hey even i have the same problem.
I was upgrading to cm 5 which needs deathspl.

chinmayfun said:
I was upgrading to cm 5 which needs deathspl.
Click to expand...
Click to collapse
Aaaaannnnnd.... it doesn't need it
http://forum.xda-developers.com/showthread.php?t=704560

lbcoder said:
There is NOT A SINGLE REASON to use the deathspl.
Click to expand...
Click to collapse
Sure there is as its one if the few full engineering spls. And I don't think your latest development will ever be quite as user friendly (however some more configuration it will be very close)
The real user friendly fix/patch for 1.33.2005 (those that know what they are doing can decide if any benifit of the spl exists) is an assertion statement in the recovery script to check the radio version is not one of the two common 1.x ones.
(the evil patch is to make the assertion somehow also autoinstall the lattest Rogers e911 patched rom if the user has the 1.x radio. Because atm the rogers rom appears to be very safe from the user messing up the boot chain.. actually we may need to "perfect" the spl a bit more I think it will let us erase hboot)

I am still a newb to the android scene - and do believe I as well made the same mistake - and have bricked my G1.
If eveything I've read is accurate, I can purchase a donor phone - broken screen, or other issues - so long as the mother board is still good.
Swap out the new mother board for the bricked one, and have a working phone again - right ?
Have an opportunity on a donor phone - have no issues pulling phones apart, and putting them back together
But just want to make sure I understand the basics
Thanks in advance for any replies

Motherboard only option ?
Is replacing the motherboard the only option left ?
I am not sure i would be able to do that
Worst day of my life i screwed up big time
Any help is appreciated.
Some tool to recover back to original.
I can understand there is no way to repair as I am not able to get into recovery nor fastboot so cant adb also...

youtube
i checked the below video bt this is kinda a complicated and nt a solution for me

chinmayfun said:
i checked the below video bt this is kinda a complicated and nt a solution for me
Click to expand...
Click to collapse
There is no tool to get it back except by the options listed above. If you are not going to switch the mobos in the G1 then you won't be able to do the other option either. There is no software that can bring your G1 back after a deathspl.

protomanez said:
There is no tool to get it back except by the options listed above. If you are not going to switch the mobos in the G1 then you won't be able to do the other option either. There is no software that can bring your G1 back after a deathspl.
Click to expand...
Click to collapse
Thanks....
i will have to plan out on buying a new android....
had waited for a long time to get tht android phone from a friend in usa....
now there are many android phones available in india.... will have to start saving some money.... cant live without an android....

hey,
i had the same prob.
only thing,
mine bricke in cause of a radio update,
i tried all which was in my head,
and all i can do
but after some nights spending to my phone i found this:
i copied my nand backup to root of sd,
and connected it to pc
first he told me, device not known
so i tried to boot the modified recovery,
and *tada* i was in recovery mode,
plz try and tell me if it fix your problem,
for mine it did
best regards,
psycho

Mine is also due to radio update dude, before flashing spl the radio has to be flashed i and forgot to do that.
Will try out your suggestion, just hoping that it work and my g1 is back to life.
Ne ways appreciate your suggestion.
Please let me know if you were able to get into recovery mode prior to putting the files on the sd card.
And if you could tell me the list of files (if u had nething other then the nand update) which you put on the sd card, i can replicate the exact process.
Thanks,
Chinmay

Hope
Is there any hope to get the G1 back to life from the Death SPL Brick ?

You should read instructions carefully man. Its not that hard. You should always verify that you have a compatible radio before flashing DangerSPL.
There is a method to recover your device and it involves a lot of time and patience. Google "JTAG".
Sent from my HTC Dream using XDA App

"JTAG".
me too, my G1 Bricked (Not able to fastboot). but i wanna know if the JTAG method work 100%.please.