Related
This is useful if you load a bad image and cannot make an activesync connection for RUU flashing method.
This method works for any 6.1 and 6.5, and even radio rom.
*** Some Kingston brand may have problem to use SD method, no solution other than use RUU method ***
0. Make sure x1 is hard-spl first
1. Make sure yr micro-sd is formatted w/ fat-32
2. rename the image file (normally "ruu_signed.nbh") to Kovsimg.nbh, copy that to the micro-sd, and put that it yr X1
3. Make sure X1 is disconnect to your PC to avoid goes to serial mode (AC power source is OK)
4. Bring x1 to boot-loader mode by turning off the x1 completely. Hold the "volume down" button on the right, and hold the power on button until you see the tri-color screen.
5. Then follow the on-screen instruction
Thx, always using this system.
Sticky
Sticked this one!
Edit By Badwolve1: Unstickyed due to lack of posting, but reference in the X1 Thread (Here)
I am newbie in Windows Mobile system.
Please somebody tell me, what is SPL, and hard spL?
inuka said:
I am newbie in Windows Mobile system.
Please somebody tell me, what is SPL, and hard spL?
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=SPL Questions?
http://wiki.xda-developers.com/index.php?pagename=HardSPL
I used this method on my X1 but it keep saying " no image files " then go to serial , any solutions? thx
hysf said:
I used this method on my X1 but it keep saying " no image files " then go to serial , any solutions? thx
Click to expand...
Click to collapse
I've got the same proplem. Any suggestion?
Thanks!
I've got it working now, just d/l all the files here and follow the instructions
http://forum.xda-developers.com/showthread.php?p=2906948
Cheers!
jackleung said:
This is useful if you load a bad image and cannot make an activesync connection for RUU flashing method.
0. Make sure x1 is hard-spl first
1. Make sure yr micro-sd is formatted w/ fat-32
2. rename the image file (normally "ruu_signed.nbh") to Kovsimg.nbh, copy that to the micro-sd, and put that it yr X1
3. Bring x1 to boot-loader mode by turning off the x1 completely. Hold the "volume down" button on the right, and hold the power on button until you see the tri-color screen.
4. Then follow the on-screen instruction
Click to expand...
Click to collapse
How do you format the micro-sd, can we use the card slot provided in laptops, becoause no adapter comes with the set
songao said:
I've got the same proplem. Any suggestion?
Thanks!
Click to expand...
Click to collapse
This could be a problem with you're ROM language.
My xperia was english, so had no problem. 2 Dutch xperia's had this problem.
Just flashed SPL first, then flashed the english rom. And now the sd card method works on the 2 dutch xperia's.
hysf said:
I used this method on my X1 but it keep saying " no image files " then go to serial , any solutions? thx
Click to expand...
Click to collapse
xmoo said:
This could be a problem with you're ROM language.
My xperia was english, so had no problem. 2 Dutch xperia's had this problem.
Just flashed SPL first, then flashed the english rom. And now the sd card method works on the 2 dutch xperia's.
Click to expand...
Click to collapse
I also got the same problem when using the rom from this thread http://forum.xda-developers.com/showpost.php?p=2392404&postcount=1 but the flash of microSD method ran pretty well with this http://forum.xda-developers.com/showthread.php?t=431218&page=6
Does the device automatically reboot after it's installed? I just used this method and the device currently says:
'KOVSIMG.nbh - OK
OS - OK
Update Complete
UPDATE SUCESS'
It hasn't done anything since.
spr33 you take the battery out, put it back in and switch on
I'm having a few problems, I have the HardSPL installed but when i load the rom image on the sd card and reboot the bootloader shows a message of "no image found". Is there something im doing wrong? The sd card is formatted to fat32 and it only has the images on it
blackax said:
I'm having a few problems, I have the HardSPL installed but when i load the rom image on the sd card and reboot the bootloader shows a message of "no image found". Is there something im doing wrong? The sd card is formatted to fat32 and it only has the images on it
Click to expand...
Click to collapse
I was having the same problem as you, I tried everything finally I just used the kovsky RUU and used the pc update tool with it. it worked great. just make sure you take your sd card out before you do it or it will keep trying to search the card and say no image.
Problem X1 rom chang on english
I can't change rom on my X1 i have formated card on FAT32 my file name is ruu_signed.nbh i chnge the name on "Kovsimg.nbh" my device is set to tri color bar and on the screen i have Loading... and nothing else
can you help me ????
It works, I'm free and thank you
After weeks and weeks aof reading, reading, reading, making copious notes so that I had the process sorted from start to finish, I decided to bite the bullet tonight, yes, New Years Eve (well it is my new X1 after all ).
OliNex Hard SPL worked a charm, then during the micro SD method, the dreaded "no image file" message appears. RATS!
Numerous FAT32 processes, different ROMS and still the same message.
Tried the cable version using RUU and viola, I now sport the fantastic Touch IT v2.2 and NO VODAFONE
I would like to thank the more senior members for their cutting comments to witless noobs that made me read, search and read again.
Also to itje for his great ROM - have only just had a cursory scan so far as only just finihsed synch, and running like a dream. Donation certainly coming your way!
HAPPY NEW YEAR ONE AND ALL at XDA Developers from a very happy revitalised X1 owner!
ROM replacement
Moved original message to correct thread ...http://forum.xda-developers.com/showthread.php?t=445818&page=42
Has anyone more of an idea why the SD card method is causing so many to come up with the "No image file" message" ?
The USB version works for me, just would like to know the reason for error message - in case need to use it one day
BIG QUESTION:
Why some people can't flash from microSD card ??
I had the same issue
After a lot of trial and error, testing and testing, I arrived to this conclusion:
IMPOSSIBLE TO FLASH WITH microSD METHOD
(Nothing happens, "serial" message or "No image found" message popped up)
a) When I used an incorrect format (other than FAT32) on any brand card
b) With two Kingston cards properly formatted
I have successfuly flashed my X1 with unbranded cards and sandisk cards,
but after many attempts and format variants I NEVER achieved a successful flashing with kingston cards
Interesting...
Hi guys! i tried 2 flash my x1 ending in f***d up device.
I did the following:
1) running the hard_spl. The flashing started and at about 50% it stopped went back to the stripes screen telling me file not found...serial....all the things you guys described in the forum.
2) I created a card with a Kovsimg.nbh and restarted the device. Result was the same: File not found!!! but i did all like in the tutorial.
3) I tried again with hard_spl: First I got an Error 282 then 262. The device changes from stripes to grey screen the bar shows 0% ......thats all.
any suggestions??????????????????
Just installed the new radio, then SPL in that order....
followed instructions for partitioning ext2,
then reboot.....
stuck on the g1 screen.
BUT
I can get to recovery (home and power). What can I do now?
larf2k said:
Just installed the new radio, then SPL in that order....
followed instructions for partitioning ext2,
then reboot.....
stuck on the g1 screen.
BUT
I can get to recovery (home and power). What can I do now?
Click to expand...
Click to collapse
did you install a rom after you installed the new radio and SPL? if not you have to do that.
how can I if i can't boot then mount? do I need to take the sd card out and get a reader? then browse the sd card on a computer and put a new ROM in as update.zip?
larf2k said:
how can I if i can't boot then mount? do I need to take the sd card out and get a reader? then browse the sd card on a computer and put a new ROM in as update.zip?
Click to expand...
Click to collapse
exactly, I had to do the same thing when I updated to the new radio and spl. If you don't have a micro sd to sd then just go buy a new micro sd card and it will come with one.
Plug in your USB cable as normal, boot to recovery, go to the console and enter
Code:
ums_enable
to mount
AdamPI said:
Plug in your USB cable as normal, boot to recovery, go to the console and enter
Code:
ums_enable
to mount
Click to expand...
Click to collapse
or do that. I've never tried it but I am sure he knows a lot more about it than me. I just know the basics of how to get the job done. haha.
don't forget to ums_disable when you are done to unmount the sdcard
david1171 said:
don't forget to ums_disable when you are done to unmount the sdcard
Click to expand...
Click to collapse
thanks for the help guys. I didn't know about that. So I learned something also. but I am sure that he is even happier that they can save themselves a little bit of money.
sweet, it worked and saved me money.
thanks, you guys rule.
EDIT: I think that these steps are helpful for someone who has same issues.
(A) I fixed SDcard issue.
1. run into FASTBOOT mode (press VOL-UP + POWER in booting)
2. run the following command from PC: % fastboot oem enableqxdm 0
(B) I could not fix USB brick issue. But I can flash RUU to my cell (no ADB connect, S-ON)
1. make gold card (ref. http://psas.revskills.de/?q=goldcard)
2. put RUU into gold card
3. flash RUU via HBOOT
NOTE:
After these steps, USB may be still bricked. You should better use older RUU for getting root
without ADB commands by AndroRoot or others. (I used newest RUU so that I lost root forever. LOL)
Click to expand...
Click to collapse
ORIGINAL POST:
My Hero has some problems two days ago. I did many things but it still does not work well. How do I fix these problems? Could anyone give me an advice?
ROM: AOSP 2.3.3 (ver04/21/2011) w/ Firerats 1.5.3 (100 4) + Kifno Universal Scripts 1.5
Recovery: aospCWMod-HC-20110421.img (w/ firerat-recovery
SD card: 8GB(real size:7.45GB) (7.0GB FAT32 + 256ext4 + 128swap)
What happened:
* doesnt recognize SD card not only after booting but also from Recovery mode.
* cant connect with Hero via ADB not only from USB cable and also from wireless(ADB wireless)
(first, I could connect with Hero, but suddenly I couldnt)
* Any other functions on HERO may work well (Call, Network, Wifi are available)
* USB cable still supply power fortunately.
What did I do before this matter happened:
* "Backup Current ROM" via ROM Manager 4.1.0.0
It did not work well although messages (Waiting for SD card to mount (XXsec)) appear. After that my phone does not recognize SD card but ADB was still working.
* After doing "Partition SD card" via ROM Manager 4.1.0.0, typing "parted" on ADB and so on (as follows), ADB was gone.
What I did to solve this problem:
* Reformat and Repartiton SD card (8GB/FAT32, 8GB(FAT32+ext3(256MB)+swap(128MB))
* Change another SD card (4GB/FAT32)
* Try another USB cable
* Partition SD card via Recovery mode
* Partition SD card via ROM Manager 4.1.0.0
* (parted command does not exist on Recovery mode)
* Reinstall Android SDK on PC
Others:
* SD card can be read from Windows 7 after my HERO did not recognizing it. (All of data on FAT32 were copied from SD to other)
* On root in SD card I found some files I have never seen before.
Those names are "qxdm_(DATE)_(TIME)_1.dm"
This files are created after reformat SD card.
I tried a few:
* ext3 partition is changed from ext3 to ext4, but still not recognize.
* Fortunately ADB wireless WORKS.
What causes that my HERO does not recognize SD card on Recovery mode?
(SD slot destroyed? or not?)
Can I reinstall recovery image and reflash ROMs via ADB wireless without using SD card? (If I can, does it make my HERO a brick?)
Any idea?
tbb-xda said:
I tried a few:
* ext3 partition is changed from ext3 to ext4, but still not recognize.
* Fortunately ADB wireless WORKS.
What causes that my HERO does not recognize SD card on Recovery mode?
(SD slot destroyed? or not?)
Can I reinstall recovery image and reflash ROMs via ADB wireless without using SD card? (If I can, does it make my HERO a brick?)
Any idea?
Click to expand...
Click to collapse
It sounds like you sorta found a solution. I would say it sounds like you're running too many tweaks. Why are you formatting your sd? Are you using data2ext or a2sd? If you use firerat you shouldn't need that. Also, to use SD in recovery you need to mount sd in the mounts/storage menu. I guess I'm a little unsure of where you're at now.
Thanks, il Duce.
> I would say it sounds like you're running too many tweaks. Why are you formatting your sd? Are you using data2ext or a2sd? If you use firerat you shouldn't need that.
Sure. All you said is right.
I used data2ext or a2sd in other ROMs once before using firerat.
Now I'm using firerat instead of it then I dont use data2ext or a2sd.
I was too lazy to remove ext4 partition.
The reason why formatting my sd card again is that as mounting sd card was not available due to these problems and I thought that its partition might be corrupted and I should fix it due to formatting it. But I had no luck..
> Also, to use SD in recovery you need to mount sd in the mounts/storage menu.I guess I'm a little unsure of where you're at now.
My explanation seemed like obvious. I wrote many unwanted things.
I couldnt mount sd in recovery menu. It said only "Error mounting /sdcard!" (also /sd-ext is same).
Before this problem happened, I was able to mount sd in it and in ROMs.
All I want to do is to use SD card in recover and in ROM again.
I did additional few things. But still I cant mount sd card.
* My hero in fastboot can be recognized from my laptop. "fastboot devices" can work well. But my hero in recovery cannot be recognized. "adb devices" cant get anything.
-> USB cable may be OK.
+ fasboot flash/boot does not work. (I found a posts that said that flash via fastboot doesnt work on Hero CDMA. Right?)
* My hero in hboot can access SD card. "HERCIMG.zip" on root in sd card can be accessed. But my hero in recovery cannot access sd card.
-> SD slot and SD card may be OK.
+ I cant find available HERCIMG.zip for HBOOT 1.47.
Can I flash recovery in terminal on ROM?
I would recommend the following:
1. Remove all partitions from your SD card, reformat it to FAT32
2. Run RUU on your phone, that should overwrite everything - you will need to re-root, but it will remove all the dingleberries from your phone.
Hope this helps.
tbb-xda said:
* My hero in fastboot can be recognized from my laptop. "fastboot devices" can work well. But my hero in recovery cannot be recognized. "adb devices" cant get anything.
Click to expand...
Click to collapse
Oh Dude, why didn't you say this earlier... I assumed that fastboot/HBOOT is not working on your phone.
1. You can absolutely flash recovery or any other images from fastboot, on a hero. Do "fastboot flash recovery <recovery.img>"
2. You can also flash recovery from HBOOT... look for the right HERCIMG.zip, place it on the root of the SD card, boot your device by holding down the volume down + power
andythegreenguy said:
Oh Dude, why didn't you say this earlier... I assumed that fastboot/HBOOT is not working on your phone.
Click to expand...
Click to collapse
Sorry I would have written it more orderly.
I already tried both and tried them again. But both seems like not work well.
HERC XC SHIP S-ON, HBOOT 1.47.0000 (HERO20000),
MICROP-0110, TOUCH PANEL-SYN0104,
RADIO-2.42.02.10.29, Mar 1 2010,16:02:39
1. You can absolutely flash recovery or any other images from fastboot, on a hero. Do "fastboot flash recovery <recovery.img>"
Click to expand...
Click to collapse
I tried some recovery.img (aospCWMod-HC-20110421.img, recovery-RA-heroc-v1.6.2.img
but it says FAILED (remote:not allow).
2. You can also flash recovery from HBOOT... look for the right HERCIMG.zip, place it on the root of the SD card, boot your device by holding down the volume down + power
Click to expand...
Click to collapse
I find several HERCIMG.zip via some file share services that Google teaches me. I tried one of them (I got it from http://forum.xda-developers.com/archive/index.php/t-792170.html) and it seems like doing well (as below).
Ohters say "CID incorrect" "Update Fail!" after Checking.
It says:
SD Checking...
<snip>
Loading...[HERCIMG.zip]
(refresh screen)
Checking..[HERCIMG.zip]
(refresh screen)
<VOL UP> FastBoot Mode
<BACK> Simlock
<HOME> Recovery
press <HOME>, go to Recovery, then boot.
But nothing changes. Still I have same issue.
Should I look for another HERCIMG.zip?
I have questions like noobish.
In my thought, these issues (cant mount sdcard in recovery and ROM) may be solved by reflashing ROM image again. Is it right?
Does "flash_image" via terminal on ROMs work well?
(I've not done it from terminal.)
If using firerat, is it necessary to flash FR-recovery over just flashed recovery to avoid rebooting back into recovery?
(I worry that if sdcard were not still mounted in recovery after doing "flash_image recovery" I would have no solution to escape from the bootloop into recovery mode because I cant connect phone in recovery via ADB now.)
Does the following steps seem worth a try?
1. push a recovery image to inner memory (e.g. /data/local/) via ADB wireless
2. open terminal, "su" and "flash_image recovery <above image>"
tbb-xda said:
HERC XC SHIP S-ON, HBOOT 1.47.0000 (HERO20000),
MICROP-0110, TOUCH PANEL-SYN0104,
RADIO-2.42.02.10.29, Mar 1 2010,16:02:39
Click to expand...
Click to collapse
Doesn't seem like you are S-off or you have Eng-SPL. The first one would have allowed you to use HBoot and the second to run fastboot.
If you were S-Off and had the Eng-SPL, the screen should have read something like this...
HERC XC ENG S-OFF...
Anyways, did you try to run RUU? You should try the one found on the HTC website for the CDMA Hero.
Thanks, all.
Fortunately I seems like fixing these problem.
But it's not known exactly why I fixed these problems.
In view of andythegreenguy's advice, I tried to run RUU on my phone.
But I cant connect my phone via ADB.
Then I reinstall HTC driver for Windows 7 once again. Of course, I already tried it before but still it didnt work well.
Booting into FASTBOOT because I could connect my phone via FASTBOOT, and connecting my phone with USB and trying to replace HTC driver.
But it still said that the driver was already installed.
But after rebooting into recovery mode, my laptop recognized it. And sdcard could be mounted in recovery mode for no special reasons.
After booting sdcard works well in ROMs.
(No qxdm_*.dm files I had seen first after these problems occurred doesnt be created any more)
It seems strange to me that connecting ADB act on the behavior of mounting sdcard. I still worry that the same issues will happen. Does this happen?
Anyway, thank all guys giving advices to me.
ps. I'll try S-OFF and ENG-SPL for avoiding the same issues.
Good to hear that your problems seem to be solved.
BTW, you don't need to have ADB running to run RUU, you just need HTC sync properly installed and have the RUU executable from HTC website.
OMG... I got excited for nothing. I didnt fix it basically. LOL
After that, I tried to flash recovery image.
flash recovery(aosp 4/21) and flash FR-recovery(1.5.3) w/ full wipe and reboot into recovery.
But the same issues occured again. (hero in recovery didnt mount sdcard again laptop didnt connect it via ADB)
It goes worse in point of losing booting ROMs. HBOOT, FASTBOOT work but didnt do S-OFF and ENG-SPL.
I acted stupid. I should have done S-OFF or ENG-SPL before flashing recovery.
I guess that the I have the same chance as the previous post (occasionally ADB works well in recovery). I will do serveral things that I did. (and try on another PC).
andythegreenguy said:
Good to hear that your problems seem to be solved.
Click to expand...
Click to collapse
Thanks. But I completely got no luck. LOL
BTW, you don't need to have ADB running to run RUU, you just need HTC sync properly installed and have the RUU executable from HTC website.
Click to expand...
Click to collapse
Oops. I guessed wrong.
I could connect Hero in FASTBOOT via USB then run "HTC Sprint Hero MR 2.27.651.6.exe". It seemed to work. But it gave 'Error [131] Incorrect Customer ID'.
I was looking for some articles about Error[131]. They said that driver's name should be "My MTC" not "HTC Bootloader".
But my laptop shows "HTC Bootloader" after re-install HTC Sync 2.0.40 again and updating driver from "Devices and Printers".
Does it cause error?
I am all confused about what your phone is doing... . Anyways, switch off your phone (battery out, if nothing else works) and follow these steps:
1. Backup your SD card
2. Remove all partitions from the SD card and format it to FAT32
3. Install HTC sync on your computer
4. Download the RUU to your computer
5. Switch on your phone
6. Run the RUU from your computer and see what you get (report back)
andythegreenguy said:
I am all confused about what your phone is doing... . Anyways, switch off your phone (battery out, if nothing else works) and follow these steps:
1. Backup your SD card
2. Remove all partitions from the SD card and format it to FAT32
3. Install HTC sync on your computer
4. Download the RUU to your computer
5. Switch on your phone
6. Run the RUU from your computer and see what you get (report back)
Click to expand...
Click to collapse
I did above steps.
1. already done backup
2. Use "Mini Tool Partition Wizard 5" for removing all partition and making FAT32. (and use "Panasonic SD formatter 3.0" for re-formatting sdcard)
3, use HTC Sync 2.0.40
4. RUU is HTC Sprint Hero MR 2.27.651.6.exe
5. connect usb cable to hero
6. run RUU and turn on hero in accordance with its guidance.
hero is booting up normally and it shows FASTBOOT USB on the top of screen.
then rebooting by RUU and it shows alternative HTC boot screen
it says "Error 131 Customer ID error" and quit.
# I tried it from Windows 7 and Windows Vista. But both are same.
My career is KDDI Mobile. Maybe it borrows sprint network
(ROMs showed that the career was sprint) Is it concerned with Error 131?
tbb-xda said:
My career is KDDI Mobile. Maybe it borrows sprint network (ROMs showed that the career was sprint) Is it concerned with Error 131?
Click to expand...
Click to collapse
The HTC RUU is for Sprint only... hence the error. Do you have a RUU specific to your carrier?
andythegreenguy said:
The HTC RUU is for Sprint only... hence the error. Do you have a RUU specific to your carrier?
Click to expand...
Click to collapse
No I dont have it. I have checked that company's page for RUU but I had no clue.
I believed without no doubt thatit would work because KDDI services operates on Sprint networks as a MVNO and usually "Settings" shows "Sprint" as connected carreer.
BTW, I left hero in recovery mode all night.
I found the files "qxdm_*.dm" created on sdcard. What are these files?
These files seem to be created not only in recovery but also FASTBOOT, HBOOT.
Those file size seem to depend on running time after booting. (if the sizes exceed 65535KB, it seem to create a new file.)
I guess that after booting my phone may keep writing these files on sdcard and this may prevent phone from mounting sdcard...
I fixed SDcard issues ( not mounting). And I could flash RUU into phone by Gold Card.
Unfortunately, USB bricked issue are not solved.
But, I wrote up these steps for helping someone having same issues because I found many similar articles.
See my 1st Post.
Please help me. it's been almost two weeks i'm having this problems. my phone is HTC Sensation XL CM10.1
the problem starts here, when i switch on my phone, it stuck on CyanogenMod, i restart my phone so many time but that wont help me, so what i did was i format my phone from bootloader.
so new problem appear again
I'm having problem with my EXTERNAL MEMORY. this is not SD CARD since HTC Sensation Xl DOES NOT have memory card slot. it's HTC Sensation XL 16GB.
my problem is everytime i enter camera and gallery, it says "No external storage available" then my whatsapp also cannot download images and videos. then when i go to storage, it shows only internal memory available, it does not shows the External one, it seems like the external memory is not inserted.
i already restart my phone so many times but still this wont help to solve the problem. then i go to recovery, then i tried to mount sdcard, but it said "cant mount Sdcard" then i tried to format sdcard but failed since the sdcard cannot be mounted.
then i try to connect my phone through USB to my computer, but i cant even read the sdcard, theres no notification that my phone is connected through USB. but its connected already. lol. so confused.
if i cant connect through USB, then how can i solve this problem? how can i flash a new rom? how to downgrade my phone since i hane read from most of the forums that the only way to solve is downgrade the phone to stock. but i cant even connect it through USB to put the rom.
im just telling this if this can help you.
RUNNYMEDE PUT SHIP S-ON
HBOOT-1.28.0006
RADIO-3831.16.00.27_eMMC -boot
Please help me and sorry if my english is bad.
or email me to [email protected]
Pls Help said:
Please help me. it's been almost two weeks i'm having this problems. my phone is HTC Sensation XL CM10.1
the problem starts here, when i switch on my phone, it stuck on CyanogenMod, i restart my phone so many time but that wont help me, so what i did was i format my phone from bootloader.
so new problem appear again
I'm having problem with my EXTERNAL MEMORY. this is not SD CARD since HTC Sensation Xl DOES NOT have memory card slot. it's HTC Sensation XL 16GB.
my problem is everytime i enter camera and gallery, it says "No external storage available" then my whatsapp also cannot download images and videos. then when i go to storage, it shows only internal memory available, it does not shows the External one, it seems like the external memory is not inserted.
i already restart my phone so many times but still this wont help to solve the problem. then i go to recovery, then i tried to mount sdcard, but it said "cant mount Sdcard" then i tried to format sdcard but failed since the sdcard cannot be mounted.
then i try to connect my phone through USB to my computer, but i cant even read the sdcard, theres no notification that my phone is connected through USB. but its connected already. lol. so confused.
if i cant connect through USB, then how can i solve this problem? how can i flash a new rom? how to downgrade my phone since i hane read from most of the forums that the only way to solve is downgrade the phone to stock. but i cant even connect it through USB to put the rom.
im just telling this if this can help you.
RUNNYMEDE PUT SHIP S-ON
HBOOT-1.28.0006
RADIO-3831.16.00.27_eMMC -boot
Please help me and sorry if my english is bad.
or email me to [email protected]
Click to expand...
Click to collapse
What rom are you on ? if you are on a ICS rom then flash my sdcard fix for ics roms
or open up system/etc/vold.fstab and if you are on old hboot = 1.25 or 6.25 then check and check that the line says 33 not 34
if on new hboot = 1.28 or 6.28 then check that the line says 34 not 33
anders3408 said:
What rom are you on ? if you are on a ICS rom then flash my sdcard fix for ics roms
or open up system/etc/vold.fstab and if you are on old hboot = 1.25 or 6.25 then check and check that the line says 33 not 34
if on new hboot = 1.28 or 6.28 then check that the line says 34 not 33
Click to expand...
Click to collapse
already did that, bbut nothing's happened. external memory still missing. im on a cm10 rom. i cant even use the sdcard fix, bcause my phone cant even connect through usb. idk if there's onother way by using usb debugging
Pls Help said:
already did that, bbut nothing's happened. external memory still missing. im on a cm10 rom. i cant even use the sdcard fix, bcause my phone cant even connect through usb. idk if there's onother way by using usb debugging
Click to expand...
Click to collapse
If vold.fstab is correct, then there is no reason to use sdcard fix, all that does is correcting that value.
Sent from my Sensation XL using xda premium
Don't worry, i think best way is to use from official Rom at the first. it will make everything solve, and your XL reset to factory options. Then if you want to use CM10, choose which one Ok for you phone.
The same error (Sensation XL)
anders3408 said:
If vold.fstab is correct, then there is no reason to use sdcard fix, all that does is correcting that value.
Click to expand...
Click to collapse
Hi!, I've the same error... I check the vold.fstab file and I've 34 and not 33 (my HBOOT is 1.25.0004). How to fix the sdcard error??
XcU1D1 said:
Hi!, I've the same error... I check the vold.fstab file and I've 34 and not 33 (my HBOOT is 1.25.0004). How to fix the sdcard error??
Click to expand...
Click to collapse
Does anyone got a solution for this problem now? How do we get to the external memory now?
hello all ,
I have the same problem any solution ? or I have to use JTAG ???
did u flash or install some tweaks/mod/script?
I had the same Error
Hi at all,
I had the same error, but today my friend repair it.
At first, i will tell you what I had done:
1. I was on http://www.htcdev.com and unlocked my Bootloader
I've get this:
RUNNYMEDE PVT SHIP S-ON
HBOOT-1.28.0006
RADIO-3831.16.00.16_M
eMMc-boot
Apr 24 2012,18:59:39
2. Then I had installed the Recovery
I had used this one
I think I don't have to tell here how I installed the Recovery with fastboot
3. Then I had installed SuperSU
--> After this I had startet my HTC Sensation XL and it was rooted
But after a time it was boring and I had downloadet the Rootbox 4.2.2 ROM and installed it direktly from the running phone with the ROM-Manager.apk
After that my HTC rebooted and for 3h I had only the RootBox screen, but after a time I opened the phone and reset it (Battery out)
Then it start fast in the Android 4.2.2 but then....
1. The phone doesn't show the SD Card under Settings
2. File Manager can't show you files on sd card
3. No USB connection to the PC
4. Recovery can't mount / format SD-Card
-> Softbrick
BECAUSE I FORGET THE "S-OFF"
!!How I get my SD Card mounted!!
(You have to install the HTC and ADB Driver on your System)
1.I had downloadet the XL Multi Tool and flashed HBOOT to S-OFF
-> Still no SD-Card
2. Then I had:
MOUNTS/FORMAT SYSTEM
MOUNTS/FORMAT CACHE
MOUNTS/FORMAT DATA
ADVANCED/WIPE DALVIK
-> No system anymore, just a withe HTC Screen
3. Then boot into Recovery
-> Connect your HTC SXL to your PC
Go to "mount USB Storage " and sty in this menu, now the PC have to format the SD-Card -> But please look that it only show you the 8 GB free space (SD-Card). I know that Windows can show you only this one but with linux it is able to format everything.
So i had formated the SD-Card
-> Download CM
-> Download Gapps
Copy on the SD-Card
Reboot to Recovery
-> Install ZIP from SD-Card
And now it woks (With my HTC SXL) I doesn't get the error "can't mount SD Card"
-> This was mot everything that I had done and try
(I had installed CM with adb and try to format it with the phone )
*Sorry for my english, i hope that you will understand it.
Greetings
Straight to the business.
When I start the phone normally it shows G1 and T-mobile logos and that's it. It's stuck there which means that it doesn't have OS to load.
I wanted to enter recovery by pressing Home + Power buttons but it loads the G1 and T-mobile logos screen.
Next thing. I tried to load DREAIMG.nbh both RC29 and RC7(USA and UK versions). After holding Camera + Power buttons it showed "0002802 not allowed" error and loaded back into bootloader.
Only thing working(if I was doing things the right way) is bootloader(Back + Power buttons).
Info from bootloader:
DREA110 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-2.22.23.02
Sep 2 2008
Serial0
Also I tried entering some commands by fastboot.exe but the phone isn't showing up on my computer. I installed both HTC Sync drivers and drivers from SDK Manager.
Question is: How do I install Android on this phone?
Never seen that error message before but I can tell you there aren't fastboot commands available to you with current bootloader so a DREAIMG.nbh is the only thing short of JTAG to bring the phone back
Redownload the nbh
Double check md5sum for match
Be sure its on root of SD card
Be sure card is formatted to fat32
Be sure you don't have too new of SD card or too large (can't remember the limit off hand)
Be sure file is named appropriate
Best of luck!
I tried both 1GB and 2GB memory cards which came with the phones from the network provider. Both double-checked to be formatted to FAT32 files system. Since You demkantor said there are no fastboot commands avaible I will have to ask people about their memory cards and try to install the .nbh file then. I will edit this post after I tried it.
Edit: Tried 2 more cards. No luck.