problem with bluetooth headset Jabra 3030 - XPERIA X1 Q&A, Help & Troubleshooting

Can anyone help me?
I'm trying to connect a jabra 3030 bluetooth headset with my x1. He finds the headset and i must enter the password. its an standard 0000. When i enter this and press ok i get the message pin incorrect, unable to connect. The device of my friend (htc) accepts the headset and can use it.
What can i do??
thanks in advance

i have that same headset and the phone does not even ask me for the password. The phone itself tries out the most common passwords (0000, 1234) and pairs the devices.

Merkaba said:
Can anyone help me?
I'm trying to connect a jabra 3030 bluetooth headset with my x1. He finds the headset and i must enter the password. its an standard 0000. When i enter this and press ok i get the message pin incorrect, unable to connect. The device of my friend (htc) accepts the headset and can use it.
What can i do??
thanks in advance
Click to expand...
Click to collapse
I have this problem totaly fixed with these Cyberon-SpeedDial+BluetoothFix
Nice Day
Wolfgang

That did it! finally i can use my headset!
thank you very much

oops wrong place to post.

Related

bluetooth pairing code never accepted

Hi,
I have a strange comportment of my Diamond when I try to pair bluetooth devices whitch have pairing code different of 0000.
Everytime I try to give the pairing code of the device (1234, not changeable), the enterred code in cleared when choosing the "next" button.
(assuming then that code is not needed or is 0000).
Has anybody a solution for this problem ?
Diamond is with original firmware from HTC (the one dowmloadable on there site).
Thanks in advance for your answers
Bouhboulle.
More of the same
I have the same problem (posted earlier). My car's hands-free requires a random code provided during the pairing process, and pairing never succeeds. I understand the Diamond tries 'standard' codes - 0000, 1111, 1234, etc. is there a way to disable this?
Me too
The same for me using Diamond from Vodafone with Vodafone 3D touchflo. I can't pair with any BT device. Please help from anybody.
Thanks a lot.
I do not have this issue.
I can pair with any code on laptop. And my carkit (parrot) just pairs perfect with 1234
BUT
When entered the code, just WAIT, and don't fill it in again. I often see the 'code' field again, and want to enter. Pairing twice gives error etc. Just ignore the empty field, when paired it dissapears.
Think its a tiny bug.
Still the same...
Hi Riel.
There is no option to enter the code twice, once you press next automatically deletes the field and acts as an enter.
BUT, surprisingly, I have installed a cooked ROM and the same again... I now have my doubts about the BT application, I think is the original one from the OS and not an cooked accessory.
I hope that anybody reading this could put some light on it as is one of the strangest behaving I've seen around PDAs in many years.
Thanks for any help.
Its strange my diamond works fine with parrot kit but not with my bt kit
anyone knw why,
Here is the solution
Go Start/settings/connections/bluetooth/right down press security tab and uncheck passkey
Doesn't work, for me at least...
turboss said:
Here is the solution
Go Start/settings/connections/bluetooth/right down press security tab and uncheck passkey
Click to expand...
Click to collapse
Thanks for the answer but I have tried and doesn't work. On the screen says this is for infrared connections, or am I lost?.
Cheers.
EDIT: I got it finally but the only way is to flash the original ROM and later the one you like. Also remember that some devices does not support more than one pairing partner, this happened to me with a Nokia BT headset, I had to refresh it.
Good luck.

Disconnect Bluetooth after call

Hello,
I searched a program for my Kaiser that disconnects a BT device, such as carkit or headset, when a call is finished.
With disconnecting I mean that the device is not connected anymore at that moment.
So when I have an incoming phonecall, I have to push to connect my BT device to my phone. Then I can pick up the phone with my device.
Who knows were I can find this?
Thanks,
Temba
Hmm, I don't see the point.
When an incoming call is received, before it starts ringing the Kaiser will look for a known paired BT device, if it is on but not connected it will connect it automatically. If it's not on at that moment you're out of luck for that call.
Just leave your device connected... you should already have to push on your device to take the call, no?
Kilrah,
The point is that when I end a call, I want that my BT device disconnects from my phone. Reason is that when I walk to my car, I want to use my BT carkit and not my headset.
Maybe I had to ask how I can unpair a BT device from my phone after a call. But 'unpairing' is for me that I have to enter a pincode every time I want to connect.
Any ideas?
Temba
Hi,
This is an issue between HTC Windows Mobilie devices and carkits equiped with a parrot chip.
As far as I've understood all Windows Mobile 6.1 devices are affected.
I myself have a Kenwood DNX 8220 BT Double DIN Head Unit in the car but there are more Head Units and carkits that make use of the Parrot chip CK5050 if I'm not mistaken.
Does anyone have a tweak or a registry setting that is able to fix this?
I've allready tried to change the COD registry value to: 52020C which is suggested as a solution in a parrot forum topic:
http://www.parrot.com/forums/english/viewtopic.php?id=5620
It didn't solve the issue
tembares said:
Kilrah,
The point is that when I end a call, I want that my BT device disconnects from my phone. Reason is that when I walk to my car, I want to use my BT carkit and not my headset.
Click to expand...
Click to collapse
Oops, had missed this reply back then. I know it's way old, but as someone brought this thread up again, never know if you might read it...
AFAIK this isn't possible. If you have 2 BT devices, paired and powered on but not connected, when a call is received / placed form the phone it will use the last one that has been either connected or selected and "Set as hands free" in the BT settings. If you want to make sure the phone connects to one of them without you going in the BT settings and set it as hands free, you need to turn the other one off.

Diamond Bluetooth HeadSet Bug

Ok, not sure if anyone got the same problem as mine, but here is my problem:
I have a Diamond using AZTOR v7 Rom, radio vBS14 if that matters and Sony Ericsson DS205 as my headset. I start my bluetooth on my diamond and can pair up with the DS205 without any problem. I can also listen to music without lag and sound is also crystal and solid.
When there is a call kicks in, I can answer the call by pressing a button on my DS205..... However, the problem comes when I end my call, the headset will be disconnected afterward and I have to manually press a button on the DS205 to make it reconnect. Each time when I make a call or when I receive a call the headset will be disconnected.
Luckily (or not), I found a workaround: Whenever I pair up my headset, I need to go to Setting -> Bluetooth -> and "Refresh" the services that I want to enable on the DS205 headset. That involves un-checking the services enabled (including "Wireless Stereo" and "Hands Free") and re-checking the services again. After I have done this "resetting", the disconnection problem I described above will be gone.....
Each time I restart the phone or have the bluetooh disabled on the phone, I need to go through that manual procedure again to make my headset work perfectly.
As you can imagine, that is quite annoying.......does anyone have the same problem as me?
I don't have this problem, but i have another problem, when i use the orignal rom, i can use my headset(jabra bt3030) in my diamond and it will automatically connect to use hands free and wireless stereo mode when i turn on bluetooth, so when i change to use swift 7.5 full rom, i have to resetting the bluetooth in diamond everytime when i close bluetooth
I can only get wireless stereo for my Plantronics Bluetooth Stereo headset. Any ideas why I can't get hands-free. Radio issue?
It was possible with some earlier ROM, but I can't remember which... (yes, I'm a flashing addict).
I'm having the same exact problem & it's annoying as hell. At this point, I can't get the bluetooth function on the phone to activate at all. I use the same bluetooth on another phone with no problems whatsoever, so I know it's the phone. I'm running the original rom.....not a flasher.
Have you tried Jetware?
Sorry, just installing this doesn't change anything. Still no hands-free.
Is there a specific option you want us to set?
shinji_lee said:
Have you tried Jetware?
Click to expand...
Click to collapse
lit2fly said:
... Each time when I make a call or when I receive a call the headset will be disconnected.
Luckily (or not), I found a workaround: Whenever I pair up my headset, I need to go to Setting -> Bluetooth -> and "Refresh" the services that I want to enable on the DS205 headset. That involves un-checking the services enabled (including "Wireless Stereo" and "Hands Free") and re-checking the services again. After I have done this "resetting", the disconnection problem I described above will be gone.....
Each time I restart the phone or have the bluetooh disabled on the phone, I need to go through that manual procedure again to make my headset work perfectly.
As you can imagine, that is quite annoying.......does anyone have the same problem as me?
Click to expand...
Click to collapse
Yes - I have a very similar problem with my jabra SP700. The Diamond 'forgets' the wireless bluetooth mode every time I disconnect the two devices (although the Stereo Bluetooth icon is still showing in the status bar).
For a short while I was having to re-pair the devices every time I got in the car - until I found the same workaround as you.
There must be a proper solution???
Hello, I had that problem in my HTC Diamond with Pioneer DEH-700bt and my jabra 3030 and she solves when changing in the registry the key to it that identifies the device in pocketpc HKLM/Software/Microsoft/Bluetooth/Sys the key "COD" and I introduced the value decimal 5898764 that identifies the device in smartphone
luck
juanfervs said:
Hello, I had that problem in my HTC Diamond with Pioneer DEH-700bt and my jabra 3030 and she solves when changing in the registry the key to it that identifies the device in pocketpc HKLM/Software/Microsoft/Bluetooth/Sys the key "COD" and I introduced the value decimal 5898764 that identifies the device in smartphone
luck
Click to expand...
Click to collapse
I have this value in COD key but I have the problem anyway.
Any solution to this annoying problem?
i use my diamond with my bluetooth handsfree kit in the car, it is classed on the phone as a headset though. the sound is ok, a bit echoey but ok. but the microphone doesnt seem to pick up my voice, i have to really shout for people to hear me, on my old Xda Orbit it worked fine. any ideas?

BT Headset Pairing Issues

I can not pair my BT head set i-Tech R35 Clip to my new TD2, i get to the enter password part but they do not pair off. I have put the BT head set in to pairing mode.
Does anyone have any advise to get me paired off.
Thanx and regards
Chris
Pairing BT
there is two places you can pair your topaz with a BT headset.
1) link in comm manager over BT, not the switch part at the far right, but the bar where it says bluetooth. it'll take you to a screen where you can pair a headset.
2) in settings in the conection tab under bluetooth (or comm manager, BT and advanced), which is a multi tab that shows you the deviced paired, connected allow you to be discoverable the ports you created etc...
my point is for headset i have had problems conecting thru the advanced menu (2) but it worked thru the Comm conection, i don't even have to enter the key, it seems like it tryes 1234 0000... so i recommend going to the option 1, and there pairing your headset.
the other thing i noticed is when you pair a device, if you got the wrong key on the first atempt even if you enter the right one after it will not pair, so the solution is pressing back refresh and connect again and then enter the right key.
at least it worked for me
cheers
Timothy
Thanx for your guide, unfortunately it still will not connect. either option 1 or 2. I tried entering the pass code 0000 but it fails to connect and says the pass code was incorrect. If i try the option of no pass code it says it has connected, however the BT headset does not respond with hte usual 5 x flashes of the LED.
I still can not get connected :-(

[Q] Pair bluetooth headset/handsfree in ICS 4.0.3

I am sorry to ask this specific question, but whenever I try to pair my blueetooth handsfree with my samsung Tab it throws an error of passcode not verified. Resulting in bluetooth not pairing with the tab, also i see there is no option i the dilaer to take the call on the handfree, with TAb it is causing loads of problem to me as I end up taking all calls on speaker or a wired handsfree.
Looking for soem support on the ways to make this happen.
Thanks
see for the pairing code which will be written in the bluetooth headset manual.. or enter 0000 or 1234 as codes. it worked for me
1234 worked for me with samsung bt headset
Sent from my GT-P1000
lyvidium said:
1234 worked for me with samsung bt headset
Sent from my GT-P1000
Click to expand...
Click to collapse
BUt how should i enter this code?
On first connection it asks for pass. Try pairing it from settings/bluetooth.
Sent from my GT-P1000

Categories

Resources