Hello
I am updating the radio version to the latest version 2_22_19_26I, but it seems the phone function works not well. I can not hear any sound from the phone and ear phone except the speaker.
Can the Radio be downgraded ?
Thank you in advance.
Brucebot
I believe it can be downgraded just fine, but as the old radio was meant for 1.1 (non-cupcake) and you're probably running a 1.5 so intheory it should cause problems. If you have Haykuros special SPL that needs the new radio and you downgrade you will brick, so the SPL needs to be downgraded. AFAIK you would just flash it with alt-s, but I'd wait for someone else to confirm that.
If your using Meltus's audiohack, that could be the problem.
I would like to know the answer to this, I lose the signal most days and have to reset to get it back.
But I want to be 100% sure I am not gonna brick the phone before I downgrade the radio
Well first, you should also post what SPL you have. The more the information the better.
xsnipuhx said:
Well first, you should also post what SPL you have. The more the information the better.
Click to expand...
Click to collapse
Yes having info in the post or your set up in the sig like xsnipah and i have helps with troubleshooting alot
Related
rom version 3.57.502.2 wwe
rom date 07/17/08
radio version 1.70.0liNex
protocol version 25.65.30.04h
spl-1.0.0lipof
it moves slow now and cant make calls here nothing anymore. How can i fix this any clues. Any help appreciated
To elaborate a little.
I make a call and here no ringing whatsoever it then saiys connected I can't hear nothing. The person on the other end hears nothing as well as you can imagine. I did a hard reboot, cleared storage and everything. Still no luck. Everything else works and yes my provider is att and it is on the 3g network it stays on there. So I know its not losing connection. I can browse net send messages just cant call anyone but people who call me. Their info comes up on my phone but nothing when i connect to connect them.
You will want to flash a proper radio and a proper HardSPL. Both of those on your phone right now are hacked to allow you to unlock your phone, they are not meant to be used as an everyday radio or HardSPL.
I would recommend you start off with HardSPL 3.29hard2 by cmonex, and that you test a bunch of different radios... I have my best luck with 1.71.09.01eMo, but that is me, you might have a horrible reception with it in your area. Try reading the stickies in the Kaiser ROM Developement:
Radio:
http://forum.xda-developers.com/showthread.php?t=393182
HardSPL:
http://forum.xda-developers.com/showthread.php?t=498320
Wow I didn't even know I will try it when I get home I appreciate your help in this matter my friend.
Your welcome!
And you might want to follow this link for the HardSPL, it is newer and cleaner for the so easier to process.
http://forum.xda-developers.com/showthread.php?t=498320
I got everything working. Thanks for your help and the phone calls work great now..I'm so relieved.
Im running Hard spl 3.29
rom is josh's 21195 build
Im using the same radio version as you as well..
its working flawlessly so far I cant believe it.
hawktimewebdesign said:
I got everything working. Thanks for your help and the phone calls work great now..I'm so relieved.
Im running Hard spl 3.29
rom is josh's 21195 build
Im using the same radio version as you as well..
its working flawlessly so far I cant believe it.
Click to expand...
Click to collapse
Happy to hear! Glad I was able to help. If you like the WM6.5 stuff you might want to check out some with the newest WM6.5 core build, 21501. And yes, it is newer than 21510, which doesnt sound right, but that is how MS rolls sometimes.
hi forum. i have been looking around to solve this problem but i wasn't able to find a solution yet so i am asking here.
i had a tilt working great, i had an accident and the phone is destroyed so i get another one.
it is the same phone but it just don't have the camera, this one came with a new version of windows mobile(6.1).
i am now having this issue, when i get an incoming call and i answer i can't hear anything from the other side and the other side can't hear me either.
after that, the phone gets totally muted, it don't make any more sound when sliding or whatever.
the only way to fix it is reboot the phone, that way i get sound again but after i get an incoming call the problem happens again.
the problem wasn't happening if i made the call but today i made a long call and after a while talking i got a constant buzz, the buzz only stopped after i turned off the phone.
any help will be apreciated as i am totally lost here.
thanks.
Have you tried flashing a different radio or a different ROM?
talking with my vendor it seems that he flashed the rom and maybe the porblem can be the radio.
i am reading here http://forum.xda-developers.com/showthread.php?t=393182 but i dont have idea wich radio should i download and either how to make the installation.
my device information is:
ROM version: 3.57.502.2 WWE
Rom date: 07/17/2008
Radio Version: 1.70.OliNex
Protocol Version: 25.65.30.04H
so maybe the radio is not compatible with the rom and that is why i am having issues with the sound ?
That is a possibility. The nice part about flashing radios is that they are completely independent from the ROM. When you flash a radio it won't flash or reset your device. Therefore, you can flash and test as many radios as you want without any real negative side-effects Just stick with the one that ends up working the best for you!
Digital Outcast, thank you for your help.
do you think you or someone can point me to a tutorial to flash the radio only ?
i am finding how to update the rom but not the radio only.
thank you again.
To flash the radio follow the same steps as flashing the ROM. You need only the radio (.nbh file) and the Kaiser Custom RUU. Just don't do a hard-reset or anything after it completes!
cool, i installed a new radio and it fixed that problem, i am checking other common features of the phone, for now everything seems to be fine.
thank you very much for your help
Problem with incoming call
I have exactly the same problem and the same versions of software and firmware. Which version of the radio firmware did you install? Where did you get it? This is my first use of a smart phone and don't know much at all about where to get this.
Thanks!!
gladone said:
I have exactly the same problem and the same versions of software and firmware. Which version of the radio firmware did you install? Where did you get it? This is my first use of a smart phone and don't know much at all about where to get this.
Thanks!!
Click to expand...
Click to collapse
Start by reading the stickies. Always best place to start. Or if you are lazy and wish to just jump to radios use this >link<. But I definitely recommend you read all the stickies before flashing a device for the first time. Just start with the newest radio and work backwards til you find a good one for your device.
Good Morning all,
Hope everyone is well. I realise that I am probably repeating a post somewhere and apologise profusely for that.
However my request is quite urgent. I have my phone flashed with Dutty's 4.1 using the step by step guide to update radio and ROM etc etc.
My touchscreen has now started playing silly buggars and as such tomorrow it gets picked up by UPS UK to disappear off to be looked at. Obviously I do not think they will take it to well if it still has duttys on there
So just so I make sure I get eveything right.... can someone just drop me a link to the correct files for a stock flash back to the way things should be.
Thank you thank you thank you thank you thank you thank you
Jody
To add an update, the boot loader screen shows:
BLAC100 32M
SPL-1.56.OliNex
Micro-Blackstone (LED) v6
Thought this might help in finding out how much work to stock?
I Think u need the original rom... or a htc one from the website?? ... can it not be downloaded from the htc website?? i may be wrong
I do but also need to make sure I do an original spl and radio as well
first off go to htc.com and download the romupgrade thats on that side (ive non is on the side check the wiki for youre countryrom)
then flash that one and se ive radio comes with it
ive not flash radio 13.**.**.**
then from the hard spl thread there a tut how t make youre spl stock again and youre finished
This is the last official ROM with 1.56 spl and 1.13 radio
h..p://rapidshare.com/files/231263089/-HTC_Touch_HD-MR_2009-RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship.exe
Ok, thanks for all your assistance. Just qiuck one, Once I have done all this how can I check it has all worked. Obviously the boot loader shows the SPL, and the ROM is whatever installed. Where will it display the current radio so I can check that too?
J7ody said:
Ok, thanks for all your assistance. Just qiuck one, Once I have done all this how can I check it has all worked. Obviously the boot loader shows the SPL, and the ROM is whatever installed. Where will it display the current radio so I can check that too?
Click to expand...
Click to collapse
At boot it shows, just restart your device and look at the red text in the bottom right corner, there it will show your current radio version.
Could also see it in device info when the device is on but dunno if you still can considering you need to return it.
gl.
Thanks to all help, radio is now reading stock as is the 1.56 spl all installed from latest ROM from HTC so also stock.
UPS collect tomorrow and with any luck they will return a working touchscreen and I can continue where I left off
anyone noticed lots of these requests....? where they flash then the touch screen stops working?
wtf......
I noticed these threads after the 1.17 radio but some users haven't upgraded to that radio and it happend to them.
i'm looking to stay on my rom until something more is found out about this.....
Curious????
imranmaz said:
anyone noticed lots of these requests....? where they flash then the touch screen stops working?
wtf......
I noticed these threads after the 1.17 radio but some users haven't upgraded to that radio and it happend to them.
i'm looking to stay on my rom until something more is found out about this.....
Click to expand...
Click to collapse
I also have read a couple of these help requests and the same problem, but what could it be, is it the windows mobile 6.5 builds that are doing this (not blaming the chef's in anyway), or some conflict with the spl... have to investigate this more...
imranmaz said:
anyone noticed lots of these requests....? where they flash then the touch screen stops working?
wtf......
I noticed these threads after the 1.17 radio but some users haven't upgraded to that radio and it happend to them.
i'm looking to stay on my rom until something more is found out about this.....
Click to expand...
Click to collapse
I have also noticed the very same, after changing the rom people are having screen problems! Why is that?
Returning to Stock for repair! to having screen problems after changing the rom
J7ody said:
Good Morning all,
Hope everyone is well. I realise that I am probably repeating a post somewhere and apologise profusely for that.
However my request is quite urgent. I have my phone flashed with Dutty's 4.1 using the step by step guide to update radio and ROM etc etc.
My touchscreen has now started playing silly buggars and as such tomorrow it gets picked up by UPS UK to disappear off to be looked at. Obviously I do not think they will take it to well if it still has duttys on there
So just so I make sure I get eveything right.... can someone just drop me a link to the correct files for a stock flash back to the way things should be.
Thank you thank you thank you thank you thank you thank you
Jody
Click to expand...
Click to collapse
dataSaMm said:
I have also noticed the very same, after changing the rom people are having screen problems! Why is that?
Click to expand...
Click to collapse
Hi, can someone (Admin) change the title of this thread from Returning to Stock for repair! to Having screen problems after changing the rom?
I think the first is solved and now we have this new problem in hand.
best regards
+1
i've had the problem with a cooked french rom (Pyrana V17C). My screen started to freeze for a few seconds. During that time, when I put the finger on the screen and slide, the screen follows the move but it comes back to where it first was, ant the move is finally not taken in consideration ... it looks like the screen is an elastic...
So it did it sometimes and it lasted a few seconds first, and then, a couple af days later, it was more often, and I had to soft reset everytime, and yesterday, I finally had to hard reset to take back the hand, and the bug came back more quickly. So I installed the latest release of this rom this morning and everything seems to be stable since a couple of hour. If it comes back I'll try another rom, but if someone can find a way to set this, that would be perfect ...
J7ody said:
Thanks to all help, radio is now reading stock as is the 1.56 spl all installed from latest ROM from HTC so also stock.
UPS collect tomorrow and with any luck they will return a working touchscreen and I can continue where I left off
Click to expand...
Click to collapse
You've found your solution to original query and returned device to stock rom & SPL. Thread has now run its purpose
Thread closed
Is there a new radio for Donut? Is there a reason to install?
Radio
No, not yet anyway. Still the same one that we have been using. That being said I still find it helps to reflash the radio every so often, I flash quite a few roms and sometimes the radio gets affected somehow. For instance, bluetooth will get buggy and a radio reflash has fixed it in the past.
andrew richardson said:
No, not yet anyway. Still the same one that we have been using. That being said I still find it helps to reflash the radio every so often, I flash quite a few roms and sometimes the radio gets affected somehow. For instance, bluetooth will get buggy and a radio reflash has fixed it in the past.
Click to expand...
Click to collapse
I agree, keep the radio zip file on your sdcard. I've also noticed audio problems can be fixed by reflashing the radio.
wont that screw it up if you have the special spl?
marty22877 said:
wont that screw it up if you have the special spl?
Click to expand...
Click to collapse
You mean to say if you keep the radio image that is made for the special spl on your sdcard will mess it up? Or are you saying that flashing the radio image that is made for the special spl will mess it up?
sorry, i wasnt clear, i meant wont flashing the radio image that is made for the special spl mess it up?
The 2.22 radio image wasn't made for the special spl. The special spl requires the 2.22 radio. No matter what spl you have you should have the latest radio.
You MUST have the 2.22 radio in order to install the special spl, you can reflash it afterwards with no ill effects.
Fingerlickin said:
The 2.22 radio image wasn't made for the special spl. The special spl requires the 2.22 radio. No matter what spl you have you should have the latest radio.
You MUST have the 2.22 radio in order to install the special spl, you can reflash it afterwards with no ill effects.
Click to expand...
Click to collapse
ahh ok, i always wondered that, all the directions say flash the radio before the spl, but it would make sense that you'd be able to flash the radio afterwards now.
As long as you are flashing the exact same radio you can. Fixing the bluetooth issue and various audio issues by reflashing the radio has been verified by multiple members on XDA. I myself have had no bluetooth phone audio and AudioHack 1.4 had no effect until I reflashed the radio.
I am not sure what radio version I am using, due to the fact I got my phone off ebay already had Cyanogen on it =l.
Question: Will my phone be bricked if I flash the latest radio and hard spl again?
Sorry if this is a stupid question I just don't want to end up like the other poor suckers who bricked their phone.
To confirm wich radio you have, turn on the phone pressing the camera buttom, and if you got 2.22.19.26I on the top, you have the latest radio, and you can flash the Danger SPL without problems.
okay, thank you very much =)