kaiser100 at&t help - Tilt, TyTN II, MDA Vario III General

i am trying to unlock my kaiser100 with AT&Tnetwork,i ve install the harpspl successfuly and after installing the pacth radio that is the step one sucessfuly,when i turned on the phone it will come and goes blure and i dont know what the problem is pls i need your help thx in advance
radio version=1.58.21.24
rom version=1.35.110.11
protocol version=25.65.30.04h

zongogsm said:
i am trying to unlock my kaiser100 with AT&Tnetwork,i ve install the harpspl successfuly and after installing the pacth radio that is the step one sucessfuly,when i turned on the phone it will come and goes blure and i dont know what the problem is pls i need your help thx in advance
radio version=1.58.21.24
rom version=1.35.110.11
protocol version=25.65.30.04h
Click to expand...
Click to collapse
Put your phone into bootloader and read what it says, because I have never heard of that radio, rom version. What Hardspl do you have ?

Kaiser100 at&t help
sorry i made a mistake ,
RADIO VERSION=1.27.14.09
KAIS1*0 MFG
SPL-1.0.O1iPof
CPLD-8
THX FOR THE REPLY ONCE AGAIN I AM SORRY THE MISTAKE

Related

Need urgent help?

i m having qtek 9100 (g3)i dont know which language it is? by mistake i upgraded to custom rom without unlocking cid.. i stucked in 98% n bootloader screen appears... i want to change in english language. itried several roms.. but the same problem. plz guide me out of this. i wanna my cell started...
in the netherlands the qtek's are sold without a simlock
however, there is a possibility that there is a cid-lock.
to remove this, read the wiki.
but first flash it with an original qtek rom
http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
then cid unlock it and flash it with the rom you want
rom probs
hi, sorry im new to the site but i noticed you have the same rom as me (1.37.401.3 WWE) i cant seem to unlock the CID, on command it comes up with "could not update itsutils.dll to the current version, maybe its in use" any help would be much appreciated.
p.s i have already flashed it to get that rom so im not sure if i need to find a new one or it can be resolved...

8125 upgrade question......Messed up my phone

Hi. I was trying to upgrade my phone with a custom ROM (i had no idea what i was doing) I was following this link
http://www.pocketpcaddict.com/forums/software/21202-wm6-touchflo-8125-g3-now-g4.html
all goes well until I click on update. as soon as i click on update my phone turns off and the update process cannot continue. It does not even get a chance to update. can anyone help me. I have NO idea what I am doing and i have NO idea what i am doing wrong. Can anyone tell me what RUU to put on the phone. i have the WWE stock 2.25.11.1. I really need to get my phone fixed.
Please help.
Err.....imma try that rom you posted, and see what happens
edit: It worked for me, i think you probably either didn't unlock your phone or you didn't upgrade to the tmobile 2.26 version first. Or it's either
yeah i got the same problem i happen to me today?>!
the link has a password on it. Mine did this as well
what do u mean by passowrd/ but all i need to do is get both ipl and spl numbers the sam/ i have the ipl but not the spl the same number as the ipl please help/ and my phone wont update the second time i go through button rom thanks
unlocking
If your IPL and SPL nos. don't match u need to downgrade ROM and upgrade all over again.

I have breaked my Breeze

Hello People
I have braked my Breeze.. I have installed futureshok's WM6 Rom.
But today (i dont know why (i'm a idiot)) i have installed 1.09 SPL and now i cant start my Phone. I see the Splash Screen but the phone doesnt continue to start.
Cane someone help me?
EDIT: Hard Reset doesnt work
EDIT2: the same problem here:
http://forum.xda-developers.com/showthread.php?t=319448
Sorry my english, i am German speaker.
Thanks
i've send some infos trough Pm in german : )
hello
same problem
i have
IPL-0.90
SPL-2.05
my phone does not pas the 3-rd logo screen
!! Problem solved !!
the 1.09 boot loader is QTEK_A07
you need to flash
1.RUU_BREE100_1.34.261.1_1.38.00.10_HTCRUS_SHIP
2.SSPL your device
3.flash other rom
Best Regards
And Happy Flashing
yes but i have:
IPL 1.0 And
SPL 1.09
I must somehow flashing SSPL 2.0 from the Bootloader
just flash
RUU_BREE100_1.34.261.1_1.38.00.10_HTCRUS_SHIP
and will boot
after that you install sspl
yes i have tested it, but it breaks by 1%.
i cant install this rom..

plz can anyone help me how to upgrade RADIO ROM for my g4 wizard

does anyonew help me how to upgrade radio rom for my g4 wizard ... plz plz help
cuz i dun really know how.. is it them same like upgrading ROM or something else
can anyone show me the steps to upgrade radio rom...
my G4 wizard has been unlocked by hardspl
thanks all
I've been searching for this RADIO ROM version: 2.61.11
can someone gimme the link do download it for my g4 wizard
thanx all with regards
..........
any ideas ?
Flashing radio Rom is very simple.Download the radio Rom which you want to flash,hook up the phone with pc via usb cable and run the RUU in the Radio Rom,it'll start to flash,it'll hardly take a minute or so to flash,phone will reboot to new Radio Rom.There's no special method to flash a Radio Rom.
You can download any Radio Rom from this link :-
http://forum.xda-developers.com/showthread.php?t=438039
zabardast_1 said:
Flashing radio Rom is very simple.Download the radio Rom which you want to flash,hook up the phone with pc via usb cable and run the RUU in the Radio Rom,it'll start to flash,it'll hardly take a minute or so to flash,phone will reboot to new Radio Rom.There's no special method to flash a Radio Rom.
You can download any Radio Rom from this link :-
http://forum.xda-developers.com/showthread.php?t=438039
Click to expand...
Click to collapse
oh really....
i didn't really think it was that simple.... cuz i thought it must have been really hard and complicated to flash any radio rom to a wizard G4 ... i got that from someone who wrote a message like this: upgrading ur radio rom could brick ur device if u don't really know how and what to do...
If it's as what u said: "hook up the phone with pc via usb cable and run the RUU in the Radio Rom,it'll start to flash"... so it must be really simple
I'll do it rite now :d
Special thanx to u zabardast

[Q] Many thank for any help

Hi,
I over 5 weeks try to unlocked my HTC HD7 device but without any results
And I asked your help.
I have HTC HD7 with these details:
OS version : 7.10.7740.16
Firmware number :2250.21.51003.206
Radio version:5.71.09.2a_22.51.50.21U
Radio hardware version:A.102.0.D4
Bootloader : 5.11.2250.0(1234400)
Chip SOC version :2.2.2.0
Any ROM that I try to install the process stop on 0%
Many thank for any help
well sorry to say but you will never install any rom with bootloader 5.11
you have to install cotulla HSPL first and them rom
cheers
jhonny said:
well sorry to say but you will never install any rom with bootloader 5.11
you have to install cotulla HSPL first and them rom
cheers
Click to expand...
Click to collapse
TNX. can you plase tel me how or gibe a link for it ?
i was try to search but withou ant reselts ...
first put phone into bootloader tri colour and see what info there.... have to see if you can install HSPL
jhonny said:
first put phone into bootloader tri colour and see what info there.... Have to see if you can install hspl
Click to expand...
Click to collapse
pd29100 ss-bc (4k)
spl-5.11.2250.0(134400) mng
microp(led) 0x07
touch s1(v1.8,#1624)
ok...good news yes you can install HSPL and then custom rom
sh4d0w86 has the best instructions to install custom Rspl/HSPL
follow his instructions.
http://forum.xda-developers.com/showthread.php?t=1295068
if you need any more help just ask
cheers and have a gr8 day
jhonny said:
ok...good news yes you can install HSPL and then custom rom
sh4d0w86 has the best instructions to install custom Rspl/HSPL
follow his instructions.
http://forum.xda-developers.com/showthread.php?t=1295068
if you need any more help just ask
cheers and have a gr8 day
Click to expand...
Click to collapse
i was try this but i get message : ERROR [294] : INVALID VENDER ID
hi erezhavida
did you follow sh4d0w86 step by step instrunctios?
you have bootloader 5.11... first you have to downgrade HSPL to less the 3.x
have you done that?
you cant install HSPL or rom until you downgrade
cheers and have a gr8 day
jhonny said:
hi erezhavida
did you follow sh4d0w86 step by step instrunctios?
you have bootloader 5.11... first you have to downgrade HSPL to less the 3.x
have you done that?
you cant install HSPL or rom until you downgrade
cheers and have a gr8 day
Click to expand...
Click to collapse
Hi Jhonny,
Yes , i was followsh4d0w86 step by step instrunctios and go to this link: http://forum.xda-developers.com/showthread.php?t=1411904
after i downloaded RUU_Schubert_HTC_Europe_5.10.401.04_SLSPL_Signed_by_ansar i got the error message.
hi erezhavida
you get that error msg when rom is wrong region
you have to find earlier rom for your region
your Firmware number :2250.21.51003.206 last number...206 is your region
look for older stock rom ending in 206
try that....that should then downgrade your HSPL
cheers and have a gr8 day
jhonny said:
hi erezhavida
you get that error msg when rom is wrong region
you have to find earlier rom for your region
your Firmware number :2250.21.51003.206 last number...206 is your region
look for older stock rom ending in 206
try that....that should then downgrade your HSPL
cheers and have a gr8 day
Click to expand...
Click to collapse
hi jhonny, do you mean downgrade the HSPL this way?
http://forum.xda-developers.com/showthread.php?t=893152
hi...
I recently bought a new hd7 but while downgrade spl i half bricked my phone.
But using the goldcard method i was able to re alive my phone again.
you first see that what position is in your boot loader screen then you will use next methods. This goldcard method is for half bricked set where you will not see any serial option in bottom.
Your can use your device but can,not install rom anymore.

Categories

Resources