Tilt PTT Button Remap - Tilt, TyTN II, MDA Vario III General

Yes, I managed to get the PTT button removed. Got me two new buttons now, but the ones I want to use I cant configure.
I am trying to get the Voice Speed Dial assigned to button 6, but for some reason the program is not listed in my Assign a program menu?
Simple fix for this, I have spent four hours looking through the forums, google and every other page on the net that has anything to do with this stupid phone.
If you know a fix for it please post it, don't post a search here or go here link...

from the windows mobile 101 handbook...
generally, any program that has a shortcut in your Start->Programs listing will be listed in the available programs to map to buttons.
simple answer is to first make sure the Voice Speel Dial is available from Start->Programs. if the link is missing there, make a shortcut to Voice Speed Dial manually and drop it in \Windows\Start Menu\Programs. then, assuming you are using Settings->Personal->Buttons to manage your button mappings, it should show up so that you can map it to a button.
these are basics really, so i will still suggest more reading and searching even if you have specifically asked otherwise.
good luck!

Related

How to remap Tilt Push To Talk button

This will drive me crazy. I have had the button above the volume mapped to Voice Command ever since I can remember. Now for the Tilt, it is mapped to Push to talk which I will never, ever use and the button mapping does not allow you to reassign it. Does anyone know if this is possible with any of the button manager programs? Do I need to flash the Kaiser ROM for this?
Also, the 8125 had a feature where you held this button down and it would swap the sound over to vibrate. If anyone knows how to get this working on the Kaiser, I highly recommend it. Beats having to pull the phone out of the holster/case to silence it, especially in a meeting.
Search for the answer.... It is here.
tried searching on push to talk. searching on buttons brings back a ton of results, none of which are specific to this particular problem. any suggestions on where to search and for what term or phrase?
Update, I found one... over in the hermes forum. This would be a good addition to the cab list sticky now that more folks are getting the AT&T ROM.
http://forum.xda-developers.com/showthread.php?t=279585&highlight=push+to+talk+map
I'll update after I have tried it on the Tilt
PTTFix work fine per the tread reference above but even though it allows you to assign a program to press and hold, there is no program "per se" to enact the vibrate setting. I do see this option on the HTC Home Screen though so maybe it is possible to create a shortcut in the Program Files directory and call it indirectly. I'll try this later when I have some time, but if anyone else gets to it first, please do share. TIA
this will do it for you.
I was never a fan of PTT anyway... Thanks for the CAB Tim. Works like a charm. For those curious, the option to select Vibra switch will be found under Settings > Buttons. Remap Button 6 to Vibra (Switch).
Spoke too soon. The PTTFix cab showed the buttons under the setting window, but after setting them, it still brought up the PTT screen. I though perhaps it needed a soft reset, and after doing so the ability to remap the PTT button disappeared.
isdereks, did you try this on the Tilt or the Kaiser? I am thinking the latter, since the PTTFix.cab shows the PTT button as a second button 5. Perhaps this is part of the problem of why it looks like it allows the setting, but doesn't actually work.
Bummer. I am quite disappointed. On top of all the bloatware, you get a button that launches an app that immediately errors out as I am not a PTT subscriber. HTC and MS should be pissed that AT&T is making the iPhone look like a clear winner. Pretty soon Apple will be running comercials with the big bloated guy for the iPhone too.
Sorry forgot to mention that I did this on the Kaiser.
yeah the new PTTFix did not work on my tilt, but worked great on my 8525. I hope this gets updated for the tilt.
http://forum.xda-developers.com/showthread.php?t=334759
yeah tried all that and the reg settings do not stay after phone is shut down.
Worked for me. You have to read the whole post.
For my own purposes as well, here are the consolidated steps to take. Until someone improves on this, I keep all this stuff in a directory so I can reconfigure my device as necessary. Here goes...
I think the trick is the PTT settings take precedence when the device boots up so delete the PTT registry settings under HKLM/Services/PTT. Delete the whole sub tree, then
From HKLM\Software\Microsoft\Shell\Keys
Add a new key called "40C6"
Add a string under the key called "Name" with the value "Button 6"
Add a new key called "40C7"
Add a string under this key called "Name" with the value "Button 6 (hold)"
(Note, do not enter the quotes, thare are to delimit what belongs in the registry entry)
Go to the Buttons settings and assign a program to the new entries. I di Voice Dial and Vibra (Switch) from the link earlier in the this post.
Do a soft reset which will remove the PTT settings from the buffer and enable your key changes.
Thanks for all the help.
I'd say the only caveat is if you some day want to use the PTT features, it would be a good idea to take an inventory fo what is under the PTT node in the registry.
It worked "GREAT". Thanks and so easy even I could do it
Instead of deleting the "PTT" key, i suggest simply renaming it to "PTTbak". That way you can just rename it back to "PTT" if you ever need to use it.
Thats what i did, and it works fine.
BTW, excellent work everyone. After upgrading to the tilt from the 8525 i lost 2 side buttons (comm manager button and the PTT button)... now i've got at least one back!
Maybe someone could offer a suggestion. For the life of me, I cannot get the reg entries of 40C6 and 40C7 to stick. I am using PHM Registry Editor. I am powering down and back up. Anyone have any suggestions?
Gator5000e said:
Maybe someone could offer a suggestion. For the life of me, I cannot get the reg entries of 40C6 and 40C7 to stick. I am using PHM Registry Editor. I am powering down and back up. Anyone have any suggestions?
Click to expand...
Click to collapse
did you delete the ptt key? (or at least rename as was suggested above?)
if you did try using the phone for while after you make the registry changes - run some other programs - then power down
greg
Greg, I renamed it and then nothing would happen. no button map and no PTT action. I am about ready to give up. But I will try your suggestions. Thanks.
NOw I got the PTT action back (the PTT screen pops up) but I cannot get the the button to do anything. I made the hold vibra and the direct push VC. Now nothing happens. Not sure what I did wrong. Not a noob at reg edits and I don't see anything wrong.
Oh well, not that big a deal, but am still open for more suggestions.
i tried renaming the PTT registry key and it didnt work. actually deleting it worked.
REG PTT
After doing the reg posted above the PTT button is free but you will notice after you push it, before the new app assigned to it pops up you will see the ptt screen for a second. What if the phone things you are using the ptt function and not Voice command or Viigo like I am?

Reassign the side OK button on Tilt?

Hi,
I've successfully re-mapped the PTT button by following the instructions from this forum. I imagine the same procedure would apply to the small OK button immediately below the jog-wheel, but I don't know where to start. Of course, the button is not present in the Settings/Buttons applet - that would have been too easy.
First, how to disassociate it from its present function (Start Menu/OK)? And once disassociated, what is the button code to enter in the registry?
I tried aebplus, and it sort of works - but the start menu still comes up on the first keypress if invoked in the Today screen.
Any ideas on how to re-map this otherwise useless key?
Thanks,
Mike.
mpd said:
Hi,
I've successfully re-mapped the PTT button by following the instructions from this forum. I imagine the same procedure would apply to the small OK button immediately below the jog-wheel, but I don't know where to start. Of course, the button is not present in the Settings/Buttons applet - that would have been too easy.
First, how to disassociate it from its present function (Start Menu/OK)? And once disassociated, what is the button code to enter in the registry?
I tried aebplus, and it sort of works - but the start menu still comes up on the first keypress if invoked in the Today screen.
Any ideas on how to re-map this otherwise useless key?
Thanks,
Mike.
Click to expand...
Click to collapse
yes, i would like to find this out as well because i have PTT assigned to comm manager and voice recorder but now i need one toggle between vibe and ring...would be nice to use this ok button i thing its pretty useless since there is anothe ok button on the front...TIA...
me too!
I also need to change the side "ok" button. Anybody have a solution?
Hello! Care if I do a quick search FOR YOU since you do not want to?
http://forum.xda-developers.com/showthread.php?t=277639
http://forum.xda-developers.com/showthread.php?t=286658
http://forum.xda-developers.com/showthread.php?t=274644
http://forum.xda-developers.com/showthread.php?t=336438
You sound like a jerk for posting that I did not search when the reply prior to mine was 6 months ago.
Did you even read the thread? None of the links you posted had instructions/advice on how to remap the side "ok" button.
grizzley said:
Hello! Care if I do a quick search FOR YOU since you do not want to?
http://forum.xda-developers.com/showthread.php?t=277639
http://forum.xda-developers.com/showthread.php?t=286658
http://forum.xda-developers.com/showthread.php?t=274644
http://forum.xda-developers.com/showthread.php?t=336438
Click to expand...
Click to collapse
yes i was about to say. non of them have steps or even telling you anything related to how to get it.
all it says is people trying it matter and they failed.
if there was no solutiion you should have just said no solution, it would have saved you time searching all that and also us bashing you
the 4th link does have some good information, lemme just quote from it
Bellfazar said:
The side "ok" button is a tough one because it has multiple functions. In programs, explorer windows, and settings it acts as an OK button but when you're at the today screen it acts as a Start Menu button. I kinda get the feeling we're not going to be able to change this for a while. Not until someone releases a keymapper specifically for the Kaiser.
Click to expand...
Click to collapse
strikeIII said:
even with the 8525 nobody has been able to re-map the ok button...it's still the biggest mystery, hehe....but now that they eliminated one button on the Tilt we really do need the ability to remap the ok button now...
Click to expand...
Click to collapse
Deathace said:
I have the side OK button remapped in spb pocket plus v4 under the buttons menu in settings and the only thing you have to do is take focus off the start menu then it works as expected.
Russ
Click to expand...
Click to collapse
It's really easy with help of AE Button Plus.
You can pretty much map any hardware key on your device with this great app.
I have it setup to be able to copy and paste by using the sliding keyboard and pressing Window Key + C to copy and Window Key + V to paste among other cool shortcuts.
Cheers!
RayanMX
Rayan said:
It's really easy with help of AE Button Plus.
You can pretty much map any hardware key on your device with this great app.
I have it setup to be able to copy and paste by using the sliding keyboard and pressing Window Key + C to copy and Window Key + V to paste among other cool shortcuts.
Cheers!
RayanMX
Click to expand...
Click to collapse
Thanks Rayan. I downloaded the AE Button Plus program for my AT&T Tilt, and it is working fantastic for remapping buttons. I was able to remap the side OK button to lock my phone by holding it for a few seconds. I love the way it also lets you leave the button with its default setting for one press, but create other actions for multiple presses.
By the way, the phone locking works fantastic. It allows me to answer calls, but doesn't activate any of the other phone functions until I unlock the phone. That's perfect for carrying the phone in my pocket. Also, incoming notifications don't unlock the phone, so that I won't accidentally turn-on a bunch of applications while the phone is in my pocket. The unlocking action is very simple.
I've also mapped volume up and down to a long press of the soft keys. That alleviates the need to use the stylus to select the volume button. Great.
The AE Button Plus program was what I've needed all along to customize my phone. It would've saved me a lot of time.
One other note, I downloaded the 2.6.3 version of the program, rather than the freeware version, but I haven't gotten any info on the cost. I may be disappointed in the near future if this program automatically deactivates. Do you know if I should expect a disappointment? I would pay for this program, but I'm not sure how much it's worth to me, but I saw no information on the cost. Do you know?
AFAIK there is only one version, if you want the registered version you buy a license and there's a procedure to activate it, otherwise it uses the free version with a couple features disabled and a nagscreen once in a while.

Can I change the PTT button to do Voice Speed Dial instead?

I have absolutely no use for the PTT button. But the Voice Speed Dial button on the 8125 was great for me.
Is there anyway i can change the PTT button to pull up the Voice Speed dial instead?
Absolutely!
There are at least three ways I know of on how to find out how to remap the PTT button on your tilt.
Method 1: Search this forum. Usually a good start would be to think about the question you are asking about...in this case "PTT button"...click on search and enter "PTT button" and the magic of a search engine will show you all the other times other people have been pondering the same question as you are.
Method 2: Easier than searching the forum is to simply go to the xda-wiki (see that along the top bar of the forum?) and read the kaiser/tilt topic on remapping your PTT button.
Both Methods 1 & 2 are stickied in this forum at the topic on all CAPS " SEARCH XDA-Developers using GOOGLE & READ THE KAISER WIKI!!! "
Method 3: Is the option used by a lot of people these days, which is to post yet again on this topic. Doing so will allow you to get someone else to do the 30 seconds of work for you to go to the xda-wiki, and copy and paste the link to the answer to your question.
http://forum.xda-developers.com/showpost.php?p=1704919&postcount=122 ... once you install the cab you should be able to remap the button.

Remapping PTT to WiFi

Hey Guyz....
First off, 'THIS IS THE BEST SITE EVER' for die-hard WM fans.
This is my first query on this site since i got no answers after a day of search.
I have an ATT TILT and I recently made the PTT key remappable.
I want to activate WiFi directly by pressing the key but dnt knw how to add this option in the drop down menu while configuring the key in 'start>settings>buttons'.
Any help will be appreciated.
Thanks.
Install this small program
vijay makes a small program that when used with command line parameters can toggle WiFi. http://www.vijay555.com/?Releases:VJVolubilis
Install this program then you'll have to make your own shortcut with the appropriate command line. You can then add the link to the registry entry for the mapped button.
Thanks 4 the reply..the software says its compatible with WM5 only....I have a WM6...my mistake, shud have mentioned it earlier..!!
Any other suggestions?
THANKS
UPDATE: Found an easier app at http://ae.inc.ru/aebplus.php. This app has a GUI (unlike Vijay's app) which is more convenient. There are loads of other options too like 'long press config' n stuff!!

PTT To OK

Hello. I apologize for making another thread like this.
I've searched through Google as well as XDA Dev, but I can't find how to remap the PTT_Long button to use for an "Ok"
I know how to remap the PTT short and long buttons to things like camera, voice command, or any other program/software, but I'm having trouble mapping it to be an "OK" button.
The reason I want this is that I got this program called LoudTalks (walkie talkie like program) that uses the center circular button of the fuze to initiate the microphone. I want to use the PTT to start the microphone, because its more convenient.
Any help will be greatly appreciated.
Also, I tried going to Settings>Personal>Buttons and doing it from there but when I'm in the area where you're suppose to press the hardware button you want to remap, it doesn't recognize it. I've tried soft-resetting a few times.
I'm using the Elite RC3 Rom.
Thanks
http://www.fuzemobility.com/?p=1249
I've all ready seen that. THat just remaps it to "Close" not "Ok"
Just get AEButton Plus and create a new button then you can map it either to programs or functions like OK with maybe a map for a long press to close. Grab it on my site or google it.

Categories

Resources