Database Develop

Can’t change network and roam with Att tilt

Hi,
I have an Att tilt (stock) and at work I loose phone signal.
I had a similar issue with my sprint phone and phone service. When the setting for “roaming or sprint network” was set to “automatic” I would loose signal all the time. Instead for the phone locking into the roaming stronger signal (Alltel) would try to lock into the sprint weak signal all day (going in and out resulting in lost calls). When I had that setting to “roaming only” it would lock into alltell (the stronger signal) with 5 bars.
On the tilt when I go to phone/settings/network the only option is “find network” and that option looks for att and not anything else. Is there a way to force my att tilt to roam only and therefore lock to the alltel network (very strong signal)? Or expose all the available networks and choose which one I want to lock in?
Thanks for all the help, this is a great forum

cannot locate different networks
im having the same problem. phone has bad at&t signal. I cannot locate a diferent network.

Forcing roaming with tilt
I guess the question is…Is there a way to force roaming only in a stock att tilt?
Thanks,

Bump
Anyone?
Thanks for the help

Bump again....I want to know the same thing. I have free roaming, but I can't get it to roam.

PRL file
Bump
Does the phrase “PRL file” provide any help?
Is this an editable file that can solve the issue?
Thanks

jreed012 said:
Bump again....I want to know the same thing. I have free roaming, but I can't get it to roam.
Click to expand...
Click to collapse
I'd like manual n etwork selection as well, but you may be roaming and not know it. AT&T sets up all their phones so it looks like you are on your native network, even when you're not. I had bypassed this and enabled manual network search on all my Motorola phones, I'd like to do the same here with my Tilt.
-Jay

i suggest setting the band in settings/phone to wcdma. Try it.

SH4YD33 said:
i suggest setting the band in settings/phone to wcdma. Try it.
Click to expand...
Click to collapse
I don't have that setting. AT&T removed it. In 3G mode the field test doesn't do much. In GSM mode it seems to work well.
-Jay

SH4YD33 said:
i suggest setting the band in settings/phone to wcdma. Try it.
Click to expand...
Click to collapse
The stock HTC ROM allows this, but it didn't seem to do anything. I know because the ATT HSDPA network is available at my house (barely), and when I lose it it switches to a full signal Edge.
But! If I switch to GSM it seems to lock to the much better Edge signal at my house instead of the HSDPA. That works for me, but will it limit my signal elsewhere?

I had the same problem....the network found was AT&T all the time and no signal, so I place the Sim in a friends Nokia with manual network selection and choose T-MOBILE, place it back in my tilt...problem solved !!
Note: I'm an international user, only use roaming when in USA. But this may help you guys !

Stock Telstra ROM Issue...

Does somone know how to solve this issue?
When I trigger an email update on the phone I continually get a warning asking me if I am okay with using data while roaming?!?!?!
Does the phone automatically think I am roaming because it is Australian? Is there a Windows Mobile Setting somewhere where I can define that my home market is Canada?
Some help here would be sincerely appreciated. Thanks in Advance...

you might try going into the account setup on the automatic send/receive page under advanced settings there is an option to use automatic send/receive schedule when roaming

Thanks for this response...I was hoping for a setting that would change the phone to make Canada as my home market...I am also getting SMS messages showing time 3hrs behind me (i.e. USA West Coast Time...)
Thanks Again, help anyone?!?!?!

Settings -> Regional Settings
Try changing that to your own country?
I wouldn't know otherwise.

Not particularly familiar with Telstra issuses, my phone was from UK running a standard rom with no carrier customisations/carrier lock and running on Optus HSDPA.
Never have these problems - I know i still roam onto the Telstra network eg is train tunnels etc.
Try using the in the Settings/Control Panel -> Connenctions-> Connection Setup. Country = Au, Operator = Telstra.
But I'm not sure if you have that icon since you are carrier locked (i'm guessing) to tel$cum.
If no one else is replying because its a region/carrier/rom specific issue try asking the question @ http://forums.whirlpool.net.au/

Disable Telfort Roaming Icon.

To all the Dutch Telfort / Diamond users: I have a roaming Icon on my screen permanently. I would like to get rid of it but so far I could not find out how. I have one last idea what might cause the roaming icon to apprear but for that to be confirmed I need your input.
So please be kind and let me know the following:
1: Do you have a SIM card that is from before the Telfort-KPN migration? Or after?
2: Do you see a little triangle in the top bar on your screen? (this is the Roaming Icon)
I appreciate your help. I will let you know if my idea was correct if enough data on sims and triangles gets in.
Thanks,
Chris

1: I have a SIM card long time before the Telfort-KPN migration?
2: And also have the Roaming Icon all the time!

Thanks!!!
Any Telfort users from the Post KPN migration era???
Chris

Come on, there must be more Dutch Telfort people here???

I have a Telfort SIM card from Oct '09 (after the KPN-Telfort migration I believe). Unfortunately I'm also stuck with the roaming triangle icon on my kaiser... would love to get rid of it! Any solutions?

I have a sim from sept 2006.
Always have the roaming symbol.
Did notice that i am roaming since i have the Touch diamond.
I am not able to auto sync my mail because of this! Very anoying!

If you hate the icon so much you can hide it by edit/create
HKLM\Drivers\BuiltIn\RIL "DisableRoamingIndicator" to 1

Söderström said:
If you hate the icon so much you can hide it by edit/create
HKLM\Drivers\BuiltIn\RIL "DisableRoamingIndicator" to 1
Click to expand...
Click to collapse
Thanks for your kind answer, had no such value in registry, created it, but no luck.

Same problem here....
1: I have a SIM card long, long time before the Telfort-KPN migration
2: And also have the Roaming Icon all the time!

I have done some extensive research on this topic. It turns out that CDMA phones can get rid of their Roaming Icon by tweaking the registry. That is because the phone contains a list of "freindly networks" and roaming is controled in the phone itself.
GSM phones do not have this database. Their roaming is controled by the provider. Therefore the registry tweak does not work. It is for the CDMA phone.
I have also contacted an unoficial "telfort forum" where a Telfort developer told me that Telfort can not fix this problem on their side. Old SIM or new SIM does not make any difference unfortunately.
The only chance that is left is if someone can find in the registry or somewhere in the phone software the exact place where the phone decides if it is roaming or not and change that in some way to make it think it is not roaming.
Too bad, I hate the stupid Roaming triangle.

Chris thanks 4 the effort! indeed very annoying the Roaming all the time..keep us posted if you find some solutions!

Thanks for this clear explanation Chris, i just started to hate this yellow thingy when i stumbled across this taskbar which makes the icon much nicer and less 'present'
BTW i'm using the Gen.Y D2 R2-Rev.Z NLD ROM on my Diamond which is based on WM 6.1
Credits for the taskbar go of course to Tsowen

To Nirak...
I don't think it solves the issue with the roaming icon. It only makes the icon looks nicer and less present..but I don't like it for example that when i want to send/receive mail i'm given a notification that i'm roaming and if i wish to continue..

Enable email during roaming.
For those of you having problems with email:
HKCU\Software\Microsoft\Inbox\Settings
ShowRoamWarning REG_DWORD 0
And within the ActiveSync Settings:
ActiveSync -> Menu -> Schedule -> Enable "Use above settings when roaming"
Works perfectly on my Benq e72, TP1 and now Omnia Qwerty. (Direct push mail send throu a MS Exchange 2003 SP2 box.)

Thanks a lot SMILEX!..
this string didn't exist, but I created it and it works perfect!!

All those solutions help, but the real solution is still not found I guess. Hope the "list" which triggers the icon will be found one day.... Because it's still quite annoying.

Hey all:
I just switched from Ben to Telfort. I don't get the roaming icon, but I do get an annoying warning every time I start a data-intensive app on my HD2. Telfort says there's nothing that can be done, but Ben is able to use T-Mobile's network without all the roaming warnings. Why can't Telfort use KPN's network without these warnings? It's obviously possible.

I have the same problem with Telfort but on HTC Touch HD
I don't want to get rid only from icon, but also from that my phone think that it is roaming, but it is national roaming, which should be handled the same as home network.

No 3G Network with I9000XWJG5

Hey,
i flashed the I9000XWJG5 Firmware and now i do not get 3g to work. I used an o2 UK Sim and do net get a data connection (before it was always 3g) and no 3g connection with orange too, just gprs.
Has anyone an idea, what i can do?
--- update ---
also only o2 uk sim is edge where before was 3g.
Made a test with my htc hero (Villainrom 12), same place, same sim card and i got 3g.
and 'only 2g' is NOT activated on the samsung galaxy s

You need to configure your mobile operators' APNs.

it is configured properly. so settings are correct. i am not the only one with the problem. i read it on various threads but couldnt find a post with the solution so far.

spacey1982 said:
it is configured properly. so settings are correct. i am not the only one with the problem. i read it on various threads but couldnt find a post with the solution so far.
Click to expand...
Click to collapse
You're holding it... wait, no, just manually re-enter the APN settings, because flashing firmware will wipe them out. also try factory reset, if that won't help.
3g will popup immediately when you have put in the correct APN settings. Trust me.

buddy01 said:
You're holding it... wait, no, just manually re-enter the APN settings, because flashing firmware will wipe them out. also try factory reset, if that won't help.
3g will popup immediately when you have put in the correct APN settings. Trust me.
Click to expand...
Click to collapse
As i said with an htc hero, same settings, it works, with the samsung galaxy it doesnt. so i can assume that the settings are correct
htc hero = 3g
samsung galaxy s = 2g

Could it be you are roaming (you see an R with the reception bars). By default it will not use 3G when roaming. You can turn it on in settings. I have a Dutch Telfort sim and KPN took over Telfort. So i am on the KPN network now and my phone always thinks i am roaming.

Marcolooij said:
Could it be you are roaming (you see an R with the reception bars). By default it will not use 3G when roaming. You can turn it on in settings. I have a Dutch Telfort sim and KPN took over Telfort. So i am on the KPN network now and my phone always thinks i am roaming.
Click to expand...
Click to collapse
No Roaming. i am in London and using UK Simcards. With the original firmware i had no problems with 3g

spacey1982 said:
No Roaming. i am in London and using UK Simcards. With the original firmware i had no problems with 3g
Click to expand...
Click to collapse
Pay as you go or contract? Have you checked the APN entries as they differ on O2.

damianarnold said:
Pay as you go or contract? Have you checked the APN entries as they differ on O2.
Click to expand...
Click to collapse
payasyougo and i changed the the user to payandgo.o2.co.uk also user to payandgo.
works fine in htc hero with 3g, not on samsung galaxy, just 2g

Flashed another Code(CODE_I9000XWJFF) and radio(MODEM_I9000XXJF8.tar) and 3g worked again.
then tried just flash the code (CODE_I9000XWJG5) and it still works. so i guess the radio (MODEM_I9000XXJG1) does not work for my samsung galaxy s properly
when i look now in the settings of 'about phone' i see
baseband version I9000XXJF8 and
Build Number ECLAIR.XWJG5
Does anyone think i will have a problem with that combination?

Why im Roaming with AT&T phone + BELL / TELUS SIM

Hi,
I would like to be able to modify my AT&T radio and change the default Mobile Network Code for my carier, is there any software to make easy to modify the ROM file ?
Thank

I'm not quite sure I understand what you're asking, but a radio will work on various different networks, depending on which SIM card you have in the phone. So I'm not sure that it's in the radio that you need to look.
What is it that you're trying to achive exactly, why do you want to change this code ?

Well, here is my problem;
I bought a Tilt 2 on ebay, and I also get an Unlock code for it. I have inserted my Bell SIM and the phone work correctly. I have configured the APN setting correctly and now I have internet without any problem.
The only bad thing is that the phone always think i'm in roaming, but that's not true. I have to deactivate all setting about roaming check, it's not a big thing but If I got to USA I will be charged for real roaming. and another downside is that many application pup info about roaming and data charge.
I'm searching since couple days to found a solution, and I'm pretty there is one but I have not enough knowledge on programming stuff. I've look all every registry in my phone and no one can't correct this ''roaming'' situation.
That's why im turning to Radio, since this phone is an AT&T, it's propbably seaching to compare SIM network provided and ROM network. I've found an interesting site about MMC/MNC http://en.wikipedia.org/wiki/Mobile_Network_Code
and found that the default network for AT&T is 310-410. Here in Canada We have bell and telus that use same technology then AT&T (UMTS 850 / UMTS 1900).
I would like to change the default ''home'' network code to 302-880. because my Sim Provided IMSI is 302-610 (Bell).
So to make it short. I want to change the default ''HOME'' network 310-410 to 302-880 so the phone will not be in a roaming profile.
Hope that someone can help me, and I'm pretty sure many people will appreciate this fix.
Thank You.

I don't know much about this, but surely it's your SIM card that is providing this code ? Since I could buy an unlocked Tilt 2 and put my own SIM card in it, and use it fine here in the UK on a UK network.
I can't believe that your phone thinks it's roaming just because it's a Tilt 2.

Yes, I found in my registry ProvidedIMSI="302610" that is the SIM registred network 302610 Bell HSPA network. So my SIM is telling the phone to use this network, but there is something in the phone that say it's roaming and not a home network. and I need to find and change this.
I'm not the only one in this situation and i would like to find a fix.

i have no knowledge about this only thing i can think of at the moment is just change the current radio version and flash a new rom. the latest version for radio is
4.49.25.95
and is found here ------> http://forum.xda-developers.com/showthread.php?t=549939
follow the right steps. [:d]
best of luck

Yes, I've updated the Radio to the latest version and still have the problem of ROAMING. i've try 2 old radio and always got the roaming icon.
Any other input will be accepted!!
Thanks

BiOs2k said:
Yes, I've updated the Radio to the latest version and still have the problem of ROAMING. i've try 2 old radio and always got the roaming icon.
Any other input will be accepted!!
Thanks
Click to expand...
Click to collapse
I read somewhere that roaming starts when you are out of your area code range.
But you can try this too
go to ------> setting ---> personal ------> phone -------> Network (in the bottom tabs)
In the network tab click Find Network and make sure it is the same network you are using.
Network selection should be "Automatic".
Now in next tab BAND
select network type to "GSM" and GSM/UMTS band to "Auto".
Try this and let me know if this work else i will ask somebody knowledgeable like Sir Phunkee

the show stopper said:
I read somewhere that roaming starts when you are out of your area code range.
But you can try this too
go to ------> setting ---> personal ------> phone -------> Network (in the bottom tabs)
In the network tab click Find Network and make sure it is the same network you are using.
Network selection should be "Automatic".
Now in next tab BAND
select network type to "GSM" and GSM/UMTS band to "Auto".
Try this and let me know if this work else i will ask somebody knowledgeable like Sir Phunkee
Click to expand...
Click to collapse
I've play with these setting and nothing seem to work.
But maybe I found something interesting.
I've just test the phone with a ROGERS SIM card and I get 3G signal and i'm NOT in roaming mode..
Now, What that mean ? Rogers 3G is UMTS/HSPA 850/1900MHz same as BELL.
Why it say Roaming when phone is connected to BELL with BELL Sim and not on ROGERS SIM??
Could someone help me with that ? fix, cab, anything ?
Thanks

rooming
Hi
I do not know think you want to do with your tilt 2
Why you don't do a hard SPL and install a cocked rom !! as energy
I am using a tilt purchased from AT&T without contract
I get a unlock cod from the internet then I do a hard SPL it and install the energy rom in, is work like a charm with Rogers, without any problem( only the gps wish I never try
Perhaps this is can resolve your problem you should try
thanks

Already done Cjoco My Tilt 2 is Unlocked and Hard-SPL with latest EnergyROM.
Like I said before, SIM ROGERS work like a charm in my phone, No roaming warning. but with BELL and TELUS SIM I get the Roaming notif but it's not true, Im connected to BELL and VOICE,DATA,etc. work #1.
People say that it work with ROGERS because this carrier have a fallback signal if 3G is not available, with BELL if I lose 3G signal my phone doesn't work.

BiOs2k said:
I've play with these setting and nothing seem to work.
But maybe I found something interesting.
I've just test the phone with a ROGERS SIM card and I get 3G signal and i'm NOT in roaming mode..
Now, What that mean ? Rogers 3G is UMTS/HSPA 850/1900MHz same as BELL.
Why it say Roaming when phone is connected to BELL with BELL Sim and not on ROGERS SIM??
Could someone help me with that ? fix, cab, anything ?
Thanks
Click to expand...
Click to collapse
then i think problem is with your sim card not with your phone. Just get your sim card replaced and i am sure the problem would be resolved.

the problem may be with his sim card, but im not sure replacing it will fix anythibng. im also with bell and have the same problem on my fuze.
bios2k, how old is your sim card?

bobzero My SIM card is 2 Week Old. so, i'm not sure it because my SIM is old.
I'll give a call at tech support @ BELL to see if they know why it doing this. I'm not sure if they will be enough good to explain this situation.
I've read last night on many forums the RILPHONE.DLL could be a possible cause of our problem.
In my config I can select GSM(850,1700) + UMTS(850,1700) but there is no option to select UMTS only. so maybe the phone is searching for GSM first (rogers) that's why when I insert a ROGERS SIM my phone is not roaming.
Is there a way I can extract RILPHONE.DLL for our EnergyROM or Stock Tilt 2 rom. Maybe I can ask a Programmer to take a look at this DLL to see the code.
I'll let you know.

I've just talk with BELL technical support and they have no idea why I'm the phone say it's in ROAMING. I've talk to the billing department and they say I don't have any ROAMING fees, so nothing to worry about..
Now, I'm still at the same state = no solution

Same here.
I was checking around and found many got this problem, including BBs. Now, some claimed that after upgrading the O/S for his BB, it went away. Another person with different device upgraded his O/S and started having that problem, and it wasn't there with stock ROM.
Make me think it has to do with the software side of thing and nothing to do with SIM or radios. To pinpoint what is causing it, can be a tough task though.

scooper True, Hard task for people that don't know much about programming ROM and files, but maybe we can have help from other that wanna look at our problem.
I'm available to test if someone want to Help us .

BiOs2k said:
scooper True, Hard task for people that don't know much about programming ROM and files, but maybe we can have help from other that wanna look at our problem.
I'm available to test if someone want to Help us .
Click to expand...
Click to collapse
You should try to change the radio and rom of your phone. Make sure to Task 29 b4 flashing. Another thing to make sure is you use the right radio, i mean the specific radio for telus, t-mobile or att.....
Wrong radio can also cause such problems.

I have the same issue with my Unlocked Tilt2 on Telus. I found a lot of people with unlocked winmo devices on bell/telus complaining of this problem and never have seen a solution. People say that a Fido sim will do the same thing. Only Rogers sims seem to not show roaming. PLEASE post if you find the solution or even cause of this.

I just did task29 and reflash ROM. I soon as I have the main menu Roaming Icon appear on top just beside or 3G.
Damn!! still stock with this roaming issue
anyone have Q's ?