I have been looking through the threads, and havent seen what I am looking for. So hopefully i will not get flamed to bad. I tried to install mikeymikes GR12, I got through the first stage of downloading the gingerbread rom to the phone through odin, but then it went south. I lost root and was unable to get back to the download screen. I then tried to use the all in one tool to root the phone, and that put me to the recovery screen where i could not use the ok button, just the volume up and down buttons. I just managed to get the download screen to come back, but i cant get anything else to work. Any suggestions on what to do, where to go from here.
Thank you for your help
I would go back to stock first. I believe your problem lies in the bootloaders. There are two bootloaders in the beginning and if you don't have the gingerbread ones installed, you won't install gingerbread properly.
I would use DesignGears One Click Odin to go back to stock and load the Froyo drivers. http://forum.xda-developers.com/showthread.php?t=731989. Make sure you open up Odin first before plugging in your phone, then hit the Start button.
Once that is done, you can try again, but read about getting the GB bootloaders installed properly before you try to flash a GB ROM. Any of the GB ROM instructions should get you there. Just make sure you know all the steps before you try it again.
Good Luck!!
I don't see why you would be flamed for your question. That is what Q&A is for and you are in a bad spot. The biggest thing to remember is to be as specific as possible when you post a question. This includes what you were trying to do, what steps you took, what was the result, when did the problem occur (which step) and what you have tried to do, if anything to fix it.
One more thing. It is always possible that the USB cable is bad or that the USB port you are plugging into (on the computer) isn't working properly. You might also want to plug into a different USB port.
Sorry these posts are broken up, but as I'm coming up with ideas, I'm posting.
Here's something you should try:
(I wrote this for Team Phoenix, hence the sig.. But it works the same with every ROM. There's a link to a very nice tutorial I suggest you follow).
http://forum.xda-developers.com/showpost.php?p=13503747&postcount=2
Hope it helps
You guys are awesome, Odin one click worked, It's on eclair, but it works! Thank you again
donkeyboy said:
You guys are awesome, Odin one click worked, It's on eclair, but it works! Thank you again
Click to expand...
Click to collapse
Glad it worked!
Make sure you read and understand before going forward with flashing
Otherwise... well.. I'll still be in here ready to help lol
BWolf56 said:
Glad it worked!
Make sure you read and understand before going forward with flashing
Otherwise... well.. I'll still be in here ready to help lol
Click to expand...
Click to collapse
Me too. If we can ... Remember not all things can be recovered from so please read everything twice before ever touching your phone.
10-4. My next question is: where do I get froyo from. Kies sees my eclair version as unregistered, so it wont update. And my ota sees an update is needed, but when i tried, the area im in has crappy signal, so the update failed and now i have to wait 24 hours to do it.
Any suggestions?
Thanks again
are you planning on flashing a custom rom?
if so updating to official froyo is A HUGE WASTE OF TIME
EDIT:are you Canadian by chance? if so check this thread:http://forum.xda-developers.com/showthread.php?t=979133
I only plan to root the official froyo right now, that is what I had before I jacked it up. I am not Canadian.
donkeyboy said:
I only plan to root the official froyo right now, that is what I had before I jacked it up. I am not Canadian.
Click to expand...
Click to collapse
Going on official froyo will get you the signature failed error (which you need the 3e recovery fix if you ever want to flash a custom ROM).
So, basically, if you want more than 2.2 official release. We suggest you don't update. If you're perfectly fine staying on 2.2 Froyo, then there's no problem lol
As for Kies, you shouldn't have any problem using Kies mini. Other than that, there is a 2.2 flash around here. I'm sure you'll find it doing a little search
I had root on my official froyo for a couple of months without a problem. Right now i cant get my phone to go into download mode, it only goes to the battery screen. If i can get to download i can make some headway
donkeyboy said:
I had root on my official froyo for a couple of months without a problem. Right now i cant get my phone to go into download mode, it only goes to the battery screen. If i can get to download i can make some headway
Click to expand...
Click to collapse
If the battery pull way isn't working. You could always go read on abd. It send SU commands and you could get your phone in downlaod mode that way.
Is there an easy way to get adb without getting the sdk. I downloaded the sdk and it keeps saying i need java, when i download the java crap it says the same thing.
donkeyboy said:
Is there an easy way to get adb without getting the sdk. I downloaded the sdk and it keeps saying i need java, when i download the java crap it says the same thing.
Click to expand...
Click to collapse
Did you reboot your pc?
Yes i did, no change
i believe you need microsoft .net framework installed also...
easy adb setup link in my sig.
files and everything needed to get going.
you may want to build a jig yourself or buy one online just in case:
MOD EDIT: No links to commercial products please.
Sorry for the long read, this is half rant and half question.
Alright, I got a captivate a long time ago (about a year and 3 months ago), loved it, rooted it and installed cyanogenmod as soon as I got home, changed roms and kernals constantly, did whatever I wanted to do.
About 3 months ago my screen stopped working.. So I take it in and they give me a refurb captivate, looked brand new so I didn't mind. However, when I tried to get into recovery it didn't work, the 3-button-method just wouldn't work at all, period, so I try to get it to work, gets stuck in bootloop.. pretty much every time I try to flash a rom something goes wrong and I get stuck in a bootloop but I can usually get into recovery or download mode because I had CWM.
So I'm on maxq's rom and it's working great for the past 2 months, decide not to mess with kernals or anything, however today I decided to try ICS, load it up, everything's fine, then I realize my soft keys aren't working, search for awhile, can't find anything, finally just manually start looking through the rom pages, and someone said that if you have the problem to just odin back to stock and try again.
I odin back to stock, but now 3 button combo doesn't work.. So more searching, find that I can run the 3e fix by TRusselo, doesn't work because I need root, more searching on how to root without recovery, find "SuperOneClick", root with superoneclick, then run 3e fix, everything is working fine, I check my email and load the ICS files onto SD card, go to restart and go into recovery mode.. Bricked, stuck in a bootloop, won't go to recovery, won't go to download, nothing.
Why the **** was I able to do anything I wanted with my old captivate, but if I even root this one it bricks? And what did I do to even brick it? I only ran the 2 programs and both of them worked flawlessly.
I guess my only option is to usb jig it, but honestly now I'm convinced that the phone is just faulty, I want to run the thing over.
-Pirate said:
So I'm on maxq's rom and it's working great for the past 2 months, decide not to mess with kernals or anything, however today I decided to try ICS, load it up, everything's fine, then I realize my soft keys aren't working, search for awhile, can't find anything, finally just manually start looking through the rom pages, and someone said that if you have the problem to just odin back to stock and try again.
Click to expand...
Click to collapse
If you would have actually searched you would have known it was a bug in the glitch. There are atleast 40 pages about that.
-Pirate said:
I odin back to stock, but now 3 button combo doesn't work.. So more searching, find that I can run the 3e fix by TRusselo, doesn't work because I need root, more searching on how to root without recovery, find "SuperOneClick", root with superoneclick, then run 3e fix, everything is working fine, I check my email and load the ICS files onto SD card, go to restart and go into recovery mode.. Bricked, stuck in a bootloop, won't go to recovery, won't go to download, nothing.
Click to expand...
Click to collapse
If you flashed ICS you should know it takes 2 flashes for it to work first time. Having a jig around is always a good idea as well.
-Pirate said:
Why the **** was I able to do anything I wanted with my old captivate, but if I even root this one it bricks? And what did I do to even brick it? I only ran the 2 programs and both of them worked flawlessly.
Click to expand...
Click to collapse
Stuff doesn't work as intended. Keep in mind everything is still in dev and not all devices are the same. But you should have searched a little more and it would have ran =/
U def don't need a jig. If it's booting it's not bricked. Try removing battery, start Odin, hold down power and down, plug in and put battery in. This should bring u to download mode.
prbassplayer said:
If you would have actually searched you would have known it was a bug in the glitch. There are atleast 40 pages about that.
Click to expand...
Click to collapse
I did start to see a few people with the problem, however many people do not follow up with what fixes their problem, and I did what a few people had said to do.
prbassplayer said:
If you flashed ICS you should know it takes 2 flashes for it to work first time. Having a jig around is always a good idea as well.
Click to expand...
Click to collapse
I should of mentioned that I did flash a few times, 3 total I think, it was getting stuck at boot.
prbassplayer said:
Stuff doesn't work as intended. Keep in mind everything is still in dev and not all devices are the same. But you should have searched a little more and it would have ran =/
Click to expand...
Click to collapse
I understand that **** happens but honestly my old captivate could always get into recover mode and download mode no matter what, it's extremely frustrating that something changed with the newer models. One of my questions was what caused the brick? I did nothing wrong from what I see and it was running perfectly until I tried to restart/boot into recovery.
Oh and mbc663, thanks but download mode doesn't work at all, nor does recovery obviously.
I can't say exactly what you are doing. Best advice I can do Re download your .zips Flash back to stock GB and try again.
-Pirate said:
About 3 months ago my screen stopped working.. So I take it in and they give me a refurb captivate, looked brand new so I didn't mind. However, when I tried to get into recovery it didn't work, the 3-button-method just wouldn't work at all, period, so I try to get it to work, gets stuck in bootloop.. pretty much every time I try to flash a rom something goes wrong and I get stuck in a bootloop but I can usually get into recovery or download mode because I had CWM.
So I'm on maxq's rom and it's working great for the past 2 months, decide not to mess with kernals or anything, however today I decided to try ICS, load it up, everything's fine, then I realize my soft keys aren't working, search for awhile, can't find anything, finally just manually start looking through the rom pages, and someone said that if you have the problem to just odin back to stock and try again.
I odin back to stock, but now 3 button combo doesn't work.. So more searching, find that I can run the 3e fix by TRusselo, doesn't work because I need root, more searching on how to root without recovery, find "SuperOneClick", root with superoneclick, then run 3e fix, everything is working fine, I check my email and load the ICS files onto SD card, go to restart and go into recovery mode.. Bricked, stuck in a bootloop, won't go to recovery, won't go to download, nothing.
Why the **** was I able to do anything I wanted with my old captivate, but if I even root this one it bricks? And what did I do to even brick it? I only ran the 2 programs and both of them worked flawlessly.
I guess my only option is to usb jig it, but honestly now I'm convinced that the phone is just faulty, I want to run the thing over.
Click to expand...
Click to collapse
Last year, I had issues with my original Cap, and got a "new" one. I learned that the bulk of the Caps going out as replacements are referbs. The one I got was a 1008 build, and does not have 3 button recovery. There are minor differences with each and every Cap that's out there. That's why some have issues with ROM's and some don't, some can over clock like crazy, and some can't at all. My guess is you have a 1008 as well, but that really doesn't matter. You just have a different device and as you seem to already have learned.
It sounds like there is more research you need to do. Even though the devices are a bit different, if you are having issues with ROM's loading, then I would say it's more of a procedure issue, than one with your device.
My procedure, is,
Remove SD/Micro SD
Odin1 Click to Stock JF6, and Master Clear(This will erase EVERYTHING)
Root with One-Click Root
Use Sideload Wonder Machine to install ROM Manager, copy update.zip and 3buttonFix to my SD, then reboot into recovery
Once in recovery I install the 3buttonFix, and install my new ROM
For me this has proven to be a very good method versus going from one ROM to another. The Master Clear cleans EVERYTHING off of your SD, so there is no chance for anything to corrupt your new install. Anytime I read a post of a install gone FUBAR, USUALLY a Flash To Stock/Master Clear (FTS/MC) fixes it
Before using Odin 1 Click, check your devices build number!! If it is higher than 1012, I would NOT recommend using 1 click, there is a higher chance of hard brick on the newer devices
Kangi...if you flash a firmware package without bootloaders, you won't have to do the 3 button fix every time. And if you keep a copy of the update.zip on your pc you don't have to even root, let alone bother with side loading ROM manager.
Cezar has a no boots jf6 and after you run that, you can still use master clear in one click.
Sounds like you got one of the refurbs that is missing the SBL. Have you looked at this thread? http://forum.xda-developers.com/showthread.php?t=1129821
I've not had this problem myself but it sounds like that might help. If I remember reading correctly, once this is flashed it should stick as long as you don't flash any other bootloaders on top of it.
Its not missing the sbl. The sbl it has doesn't respond to key combos. Derpa sherpa moment for samsung I guess?
Rofl yeah...if it was missing the sbl it would be fuggin bricked!
studacris said:
Kangi...if you flash a firmware package without bootloaders, you won't have to do the 3 button fix every time. And if you keep a copy of the update.zip on your pc you don't have to even root, let alone bother with side loading ROM manager.
Cezar has a no boots jf6 and after you run that, you can still use master clear in one click.
Click to expand...
Click to collapse
I know, thanks. I'm such a creature of habit, I started doing it like this a bit over a year ago, and has worked flawlessly for me(just jinxed myself!) so I never saw a reason to "fix what aint broke".
I'll take a look at Cezar's thanks!
Yeah, missing SBL was a poor choice of words. My bad.
kangi26 said:
Last year, I had issues with my original Cap, and got a "new" one. I learned that the bulk of the Caps going out as replacements are referbs. The one I got was a 1008 build, and does not have 3 button recovery. There are minor differences with each and every Cap that's out there. That's why some have issues with ROM's and some don't, some can over clock like crazy, and some can't at all. My guess is you have a 1008 as well, but that really doesn't matter. You just have a different device and as you seem to already have learned.
It sounds like there is more research you need to do. Even though the devices are a bit different, if you are having issues with ROM's loading, then I would say it's more of a procedure issue, than one with your device.
My procedure, is,
Remove SD/Micro SD
Odin1 Click to Stock JF6, and Master Clear(This will erase EVERYTHING)
Root with One-Click Root
Use Sideload Wonder Machine to install ROM Manager, copy update.zip and 3buttonFix to my SD, then reboot into recovery
Once in recovery I install the 3buttonFix, and install my new ROM
For me this has proven to be a very good method versus going from one ROM to another. The Master Clear cleans EVERYTHING off of your SD, so there is no chance for anything to corrupt your new install. Anytime I read a post of a install gone FUBAR, USUALLY a Flash To Stock/Master Clear (FTS/MC) fixes it
Before using Odin 1 Click, check your devices build number!! If it is higher than 1012, I would NOT recommend using 1 click, there is a higher chance of hard brick on the newer devices
Click to expand...
Click to collapse
I didn't think anyone else was going to reply to this thread, whoops.
Thank you for helping me, but I'm still having trouble.
Rom manager doesn't show up in Market, Sideload wonder machine tells me [INSTALL FAILED OLDER SDK] with any apk of Rom manager I find.
kangi26 said:
3buttonFix to my SD, then reboot into recovery
Click to expand...
Click to collapse
How do you reboot into recovery when 3buttonfix hasn't been applied yet?
This sucks and is extremely frustrating, I feel like my captivate is just trolling me.
-Pirate said:
I didn't think anyone else was going to reply to this thread, whoops.
Thank you for helping me, but I'm still having trouble.
Rom manager doesn't show up in Market, Sideload wonder machine tells me [INSTALL FAILED OLDER SDK] with any apk of Rom manager I find.
How do you reboot into recovery when 3buttonfix hasn't been applied yet?
This sucks and is extremely frustrating, I feel like my captivate is just trolling me.
Click to expand...
Click to collapse
When I get home later tonight I'll link you everything you'll need. Again, VERY important, what is your build number? If it's 1012 or higher, don't use Odin 1 click
Sent from a autonomous device
kangi26 said:
When I get home later tonight I'll link you everything you'll need. Again, VERY important, what is your build number? If it's 1012 or higher, don't use Odin 1 click
Sent from a autonomous device
Click to expand...
Click to collapse
Ok, finally got it working, I did exactly what you said, I found the rom manager 3.00.002 or whatever and that worked with sideloader, it took some messing around with but I'm running ICS now, thank you so much man, you've helped me so much, and now I can change roms and keep up to date without worrying about constantly soft-bricking.
As for my build number, I'm not sure, the only thing I see under build number in settings is: "IML74k"
-Pirate said:
Ok, finally got it working, I did exactly what you said, I found the rom manager 3.00.002 or whatever and that worked with sideloader, it took some messing around with but I'm running ICS now, thank you so much man, you've helped me so much, and now I can change roms and keep up to date without worrying about constantly soft-bricking.
As for my build number, I'm not sure, the only thing I see under build number in settings is: "IML74k"
Click to expand...
Click to collapse
The build number is actually under your battery, and looks like 10.06, 10.07, 10.08 and so on. It is the production date
Edit** And as a side note, do NOT try to use the 3buttonFix with a GB ROM, it WILL brick your phone in a really bad way. ONLY use it with 2.1 or 2.2
kangi26 said:
The build number is actually under your battery, and looks like 10.06, 10.07, 10.08 and so on. It is the production date
Edit** And as a side note, do NOT try to use the 3buttonFix with a GB ROM, it WILL brick your phone in a really bad way. ONLY use it with 2.1 or 2.2
Click to expand...
Click to collapse
Is it weird that I don't have a build number? It seems I can't post pictures without a few more posts, maybe this will work: deleted
And thanks for the warning on the 3buttonfix, I'm going to have to read more about bootloaders though, I don't understand what you and studacris were talking about earlier in the thread, haha.
-Pirate said:
Is it weird that I don't have a build number? It seems I can't post pictures without a few more posts, maybe this will work: imgurDOTcom/26sXGl.jpg
And thanks for the warning on the 3buttonfix, I'm going to have to read more about bootloaders though, I don't understand what you and studacris were talking about earlier in the thread, haha.
Click to expand...
Click to collapse
I havent seen that before, there doesnt seem to be a build#
Might want to pull that photo, it's not too good having your IMEI number publicly displayed
kangi26 said:
I havent seen that before, there doesnt seem to be a build#
Might want to pull that photo, it's not too good having your IMEI number publicly displayed
Click to expand...
Click to collapse
Maybe because it's a refurb? and whoops didn't think about that.
-Pirate said:
Maybe because it's a refurb? and whoops didn't think about that.
Click to expand...
Click to collapse
I'm not sure why, mine is a referb, and I have a sticker with mine on it. Ooh well, it is what it is
Sent from a autonomous device
ok, so i was trying to root my sprint htc one, and everything was going, ok. i unlocked the bootloader simple enough. then i wanted to back up the data, before i tried putting roms on it. well twrp kept saying i only had about 34 mb of space which made no sense since i had formatted it, and only brought back things like contacts and texts. when i checked my phone it said that i had 24gbs. so i couldnt find an answer to this anywhere so while looking through twrp i saw the wipe function. not having seen anything about it, i said, maybe if i reformat it again, itl clear up. so i hit wipe all. well after it was done it only said i had 1.2 gbs, so still confused i went to load my normal os, well i cant. because wiping everything meant the system data the os is on. i spend hours trying to find a fix, as im only able to go between the bootloader and twrp, and i see a sideload option, and after following the steps, i attempt to sideload. everything is going well. Viper looks like its about to install, until at the last second it says install fail. but now i cant even access the recovery menu. literally stuck in the boot loader option. all my contacts and pictures and stuff are backed up, so i have no problem formatting my phone to scratch if it means fixing this, but can anyone point me in the right direction???? i cant find anything on this, ive been searching through this site, and some people with similar issues solve it by sheer luck, but i have no rom back up(since i was trying to do that when i got into this problem) please please help!!!
**edit** i was able to get into twrp by using the recovery steps, though im just back to square 1. is there a guarenteed reliable sideloader that can work?
Look HERE
Try the latest RUU first if it does not work follow the guide from the beginning it will get you fixed up.
raynefr said:
ok, so i was trying to root my sprint htc one, and everything was going, ok. i unlocked the bootloader simple enough. then i wanted to back up the data, before i tried putting roms on it. well twrp kept saying i only had about 34 mb of space which made no sense since i had formatted it, and only brought back things like contacts and texts. when i checked my phone it said that i had 24gbs. so i couldnt find an answer to this anywhere so while looking through twrp i saw the wipe function. not having seen anything about it, i said, maybe if i reformat it again, itl clear up. so i hit wipe all. well after it was done it only said i had 1.2 gbs, so still confused i went to load my normal os, well i cant. because wiping everything meant the system data the os is on. i spend hours trying to find a fix, as im only able to go between the bootloader and twrp, and i see a sideload option, and after following the steps, i attempt to sideload. everything is going well. Viper looks like its about to install, until at the last second it says install fail. but now i cant even access the recovery menu. literally stuck in the boot loader option. all my contacts and pictures and stuff are backed up, so i have no problem formatting my phone to scratch if it means fixing this, but can anyone point me in the right direction???? i cant find anything on this, ive been searching through this site, and some people with similar issues solve it by sheer luck, but i have no rom back up(since i was trying to do that when i got into this problem) please please help!!!
**edit** i was able to get into twrp by using the recovery steps, though im just back to square 1. is there a guarenteed reliable sideloader that can work?
Click to expand...
Click to collapse
Do you still have the memory issue? If so, try running a RUU, and see if that fixes your problem.
If not, just use adb sideload to sideload a ROM. Then wipe everything except internal storage and install the ROM normally.
EDIT: Looks like @BD619 ninja'd me XD
BTW sideload very rarely works when you wipe your sdcard.
BD619 said:
Look HERE
Try the latest RUU first if it does not work follow the guide from the beginning it will get you fixed up.
Click to expand...
Click to collapse
hey thanks for the reply. i followed the guide and after some effort, everything seemed good, but when i was trying to load 5.03 sense 6 rom, i got to the htc start up, then it defaulted back to the bootloader..i went with the deodex version of the download, should i try the odex? or a different version all together?
and now it doesnt want to boot into recovery mode either! going to try redoing the steps, but i just cant figure out what the problem is
**edit* i cant fix twrp. the title loads, but thats it. endless loop
ok i got it to seemingly work. restoring content now. sat in fron of my pc for 15 hours...not even sure where imat or if i got any closer to rooting..smh..thank you everyone who helped. if anyone comes across this
to get out of the endless cycle of recover/loading screen.. delete your twrp, or whatevs your using. even if you have the latest, just redownload it. worked for me. i guess there is a huge difference between the odex and the deodex.i had figured deodex was a more refined version, but maybe it had more complicated software. in any case, if you are at a point where you dont have a base os, and you make it this far, go with odex, it worked for me. htc is big on back up, so i was more worried about having to scrap my phone then i was regaining data, especially with most of my stuff backed up to google drive. hopefully you guys are careful.
now...about this backup issue i had in the first place. how can i fix the storage issue? i have a 32 gb phone minus partition leaves me with over 24gb..why is it going based off the separate phonememory slot? why cant i change it?