Hey!
each time I flashed a new rom, the setup of 3g internet doenst work anymore.
i entered all data like they should be, but it doenst work.
after a while, sometimes hours, sometimes a day or longer the connect works again without doing anything.
I dont understand why!
anyone got a tip for me?
Ok, lets get more information...
the interessting thing is, that if i do a full backup of my system when mobile internet works, and restore it after a flash (or hard reset), interworks works immediately.
when not, no internet for uncertain times
Are you sure connection setup runs on startup. I mean you're internet settings must be setuped before it works and this starts automaticely some time after you connect to your phone network.
some time ago i tried it aner it didnt work.
now i tried again and now it works =)
Still I am very curious why I cannot change the settings manually...
Related
Hi all,
Here's a strange one for you, my data connection on my phone was working fine since I've got it (since launch) but all of a sudden, over the last few days, it now can't stay alive for over a couple of hours. To be more precise, it does stay connected, but looses the ability to do anything, for example, active sync sits there "waiting for network" and opera sits there "looking for host" and I can't view anything. It works fine before then, then just suddenly stops. Anyone got any suggestions on what this could be? It's really annoying because it means that my emails suddenly don't get sent through, and I never know when it's stopped working unless I manually check.
Regards,
DragonStar
I got the exact same problem, the only thing I didn't do so far is a hard reset...
The weird thing is that it DOES WORK for lets say the weather plugin in the today screen, but IE, opera, nothing else works
I'm having this same issue with panosha's v2 rom. Weather works ok, but nothing else. I really need it for activesync, and that just comes back and tells me I have permission issues, yet when I soft reset, it works just fine.
Sounds like activesync is the culprit here. Are you using activesync when the data quits working? cause i've had lots of issues with activesync screwing up my data connection.
http://forum.xda-developers.com/showthread.php?t=360268
that is my response to how i get activesync to work and keep my computer connection separate from my phone's connection. If the problem described isn't the exact same thing i'm guessing that it something similar. i would suspect that somehow the settings in your network selection drop downs have been changed.
hope this will help in some way.
I SIM unlocked to use T-Mobile with my SX66 to do a comparison with my Wizard to see how this BA performs: I cant figure out if this is an older unit (05 versus 06??) or a newer one (400 MHz rather than 190 and a 2 megaixel camera on the camera units rather than a 1.3???) and installed Helmi, which has lots of features I don't need but which seems to be the only WM6 ROM around for this unit (?).
Installation went fine and without a hitch but now on boot up, I don't get a splash screen of whatever type: I get the initial bootloader screen, which is curious! But seems to be correct. However on that screen on soft reset, it shows the OS correctly but with a R 1.02.10 and a G of 1337.35. What is unusual is that on hard reset it shows both these settings as empty. Only on soft reset does it show the radio etc.
Slightly more worryingly (as I would like to test out VoIP on this unit) this BA wont connect to the Internet. WLAN is off by default and turning it on just flashes up a list of local WiFi LANs: It wont actually connect to any of them. it does take you through the steps and asks all the seemingly obvious questions (Is this the Internet or a work VPN? WHY SHOULD YOU CARE??) and at the end of the process, it just doesn't connect. Even more annoyingly, when it doesnt connect, it turns WLAN off again, so you don't really know when it did this (or, of course, why). It takes you through all the steps and then gives you the Configure Wireless Networks screen which shows all local networks which you KNOW to be available as "unavailable".
Is this a known problem with Helmi or does anyone recognise what I am doing wrong please?
I had the same problem with my BLUEANGEL (MDA III). The Upgrade to WM6 was totally ok. Everything is working, except the WLAN. Did you tried this: http://forum.xda-developers.com/showthread.php?t=343862
No, it just keeps disconnecting (things getting worse)
player_no1 said:
I had the same problem with my BLUEANGEL (MDA III). The Upgrade to WM6 was totally ok. Everything is working, except the WLAN. Did you tried this: http://forum.xda-developers.com/showthread.php?t=343862
Click to expand...
Click to collapse
The WLAN started trying to connect as I describe but now just doesn't even turn on in Comm Mgr.
Also tried upgrading to xplode but BA loses communication during the upgrade process. (Attempted to ask Xplode himself on that thread and will see if he has any idea)
i donno if this helps but wad i did was i turned on bluetooth. thn i turned on wifi.
it detected my wifi router entered my wep key thn logged on to internet. thn i switched off my bluetooth. i tried surfing and was ok.
i switched off wifi waited awhile thn turn on wifi.. it works flawlessly..for now
edit: u gotta use comms manager
badass7 said:
i donno if this helps but wad i did was i turned on bluetooth. thn i turned on wifi.
it detected my wifi router entered my wep key thn logged on to internet. thn i switched off my bluetooth. i tried surfing and was ok.
i switched off wifi waited awhile thn turn on wifi.. it works flawlessly..for now
edit: u gotta use comms manager
Click to expand...
Click to collapse
Yes, although bluetooth was already working, this seems to do something: I dont know what it is but it appears to be some combination of turning off and turning on again all sorts of things in CommMgr. Now it is working.
I wonder how long it will continue to work? It certainly doesnt let me open VoIP settings while connected. I still get a fatal exception when I try to do so and even though I have inputted all my VoIP settings, VoIP still doesnt work.
Still trying to figure out whether Xplode knows what is causing my failure to communicate WHILE upgrading from Helmi to Xplode.
licensedtoquill said:
Yes, although bluetooth was already working, this seems to do something: I dont know what it is but it appears to be some combination of turning off and turning on again all sorts of things in CommMgr. Now it is working.
I wonder how long it will continue to work? It certainly doesnt let me open VoIP settings while connected. I still get a fatal exception when I try to do so and even though I have inputted all my VoIP settings, VoIP still doesnt work.
Still trying to figure out whether Xplode knows what is causing my failure to communicate WHILE upgrading from Helmi to Xplode.
Click to expand...
Click to collapse
i am a noobie so i don't understand the term VoIP yet as i haven't read thru all FAQs and technical stuff lol pardon my noobness haha
anyway i wanted to update that today very early in morning when i tried using
wifi again the normal way but could not so i followed the steps again... and when it was working i pushed the reset button and till now which is abt 12hrs later still works ok ... i do not noe if its by chance or there is no way it shld work by my steps but it works for me and i hope it works for u too
btw i am using helmi's rom if it helps
cheers
hemi rom wifi not working
wifi not working i've tried it to turn on and turn off but to no avail
licensedtoquill said:
Yes, although bluetooth was already working, this seems to do something: I dont know what it is but it appears to be some combination of turning off and turning on again all sorts of things in CommMgr. Now it is working.
I wonder how long it will continue to work? It certainly doesnt let me open VoIP settings while connected. I still get a fatal exception when I try to do so and even though I have inputted all my VoIP settings, VoIP still doesnt work.
Still trying to figure out whether Xplode knows what is causing my failure to communicate WHILE upgrading from Helmi to Xplode.
Click to expand...
Click to collapse
I have made an interesting discovery about this flaky WiFi on the Blue Angel
pda2kstar said:
wifi not working i've tried it to turn on and turn off but to no avail
Click to expand...
Click to collapse
Often when I try to connect using IE and it says it isn't connected, it IS. I often get the message that I cant connect with the usual reference to completely useless settings pages or an offer to dismiss and give up on the internet connection.
But if I ignore it, I find that I mysteriously AM connected.
I have had my diamond for about 2 weeks now and the wifi worked fine for the first few days I had it. I did a hard reset to fix another problem and then after that the wifi didn't work. I may have changed a setting but I don't remember. I have looked at every setting that there is and I can't figure out everything. I know that there should be wifi working because I use it on my ipod and laptop. I have tried putting my battery to performance, but that didn't work. Any suggestions of what I can do or try?
you tried the usual? restart ur wireless AP/router? delete the connection on ur diamond, try redo it, does it pick up your wireless AP/router?
Does bluetooth work ok? If not, then its a hardware fault and would need to be repaired.
Yes, I have tried your method beany and my bluetooth works, I just tried and it works fine. I can not get wifi anywhere. My house's wifi doesn't work, and at the gym, it doesnt work. No networks at all even show up. I need a solution.
Go to Settings>Connections Tab>Wlan>Power Mode> Slide the slider to the far left (Best performance). Should fix it
happened to me too the first few times, even when holding the phone up to the antenna of the router it wouldn't connect. i don't know why the "best battery" option is even available
Yes, I know that. That was the first thing I ever did. It didn't help. No wifi shows up anywhere. Is there any settings that I may have changed in Network adaptors?
I need something because it is so annoying with no wifi.
same problem here. No Wifi... But Bluetooth works OK
Maybe some radio patch or something??
I really don't know what to do anymore. My Iifi stop working without reason. I saw some topic about it but it seems nobody now how to fix it.
Please, help me.
I have already updated everything, it works randomly if I reset my phone.
Thanks
hi guys, im new here, but any how to the point, i got win 6.5 on my phone, and i cant get wifi working, its connected to my router, it shows that, and i know alot about routers and everything, its setup, and my laptop connects to router and internet no probs, but this..... it wont, i went into browser connections and put it on wap and tried internet, nothing, then i tried secure wap, nothing, and then internet, nothing, and i put it on automatic, nothing, so here i am, wifi is not working on it..... i disabled HSDPA or w/e its called because im on a pay as you go plan and i dont have a data plan..... thus i'd just use wifi because its free and theres plenty of it around.....
anybody know whats up?, thanks, the phone is a samsung omnia i900
If you haven't already power cycled your phone (pop out the battery while the device is on and leave it out for about 15 seconds. If that doesn't work you could try downloading a different web browser like Skyfire or Opera mini or just back up your data and do a master reset if all else fails. If none of that works contact your provider.
You may have to hard reset or flash another rom
well i have tried soft reset, ive reset the phone, and i had another rom, that Yonn's SPB or android one, i had OCK's and that worked but that was months ago, the Yonns i remember it worked... i think, but then stopped, then i am on steff195's rom which i like so far, has a bunch of useful stuff in it.....
but i still cannot get the wireless going GRRR....... i had opera in yonns and i do remember now that i had wireless working... but then it stopped working, so im not sure whats up, i think i have wrong settings.... and also with yonns maybe it stopped working when spb was asking me for a license and i just ended up closing it off.....
bumpppppp .....
Would your web worked if you had data through your provider?
These are just a few settings you might check, i'm on a dutch WM6.5 rom so translated the options, might be a bit different on your phone.
start>settings>connections>wifi (or wlan)>advanced>energymode (or powermode)> set it to 'best performance'
start>settings>connections>connections>advanced>choose networks> make sure both options are set to 'my work network'
Hope it works out for you
well the thing is, also i mean my actual network the phone is with, being ROGERS, is not there in the choose networks and its using a "vodafone" but, that does not concern me because, i will not be using any data from them any how, like i said im pay as you go, i make calls, and thats it, and for my data aspect i want to be using the wifi, now i checked, i got a mac address, i got a ip, but i just cannot do as much even as to connect to my own router if i enter its ip in, ive tried what you guys have said, and so far to no prevail......
Last week, my Hero suddenly stopped being able to see my home network. All the other networks around me are visible, but not my home network. I tried the Wi-Fi FXR app on the market, but that didn't work at all. Did a full wipe and installed a fresh new ROM, and I *still* can't see my network. Even manually entering the info for it did nothing.
I can connect to other networks on my Hero, and all my other devices at home can see and connect to my network perfectly fine. Does anybody have any idea what else I can try? Having tried a different ROM and a full wipe of everything, I'm at a loss now.
Edit: Tried actually *formatting* system/data/cache, then installing a different ROM (CM6 this time). Still no luck. My home network never shows up on the list, but all others do. Rebooted my modem and router, even changed the security to just WEP (was WPA2 before, which worked just fine before this randomly happened). I can't understand how, without doing anything, my Hero just suddenly refuses to see my wireless network. It can't just suddenly be incompatible with my router after working just fine with dozens of ROMs and a couple years under their belt.
i feel your pain
when i turn on wifi on my hero, no matter what rom it is, i can see all the other access points right away. but my ssid wont pop up, i have to wait a good 3 minutes until it pops up and connects. have you tried waiting longer for it to show up? worth a shot.
I tried letting it sit for at least 5-10 minutes. I'll let it sit next to my router for a longer time and see if that does anything.
I let it sit for a few hours, but nothing popped up. Tried a few hours with and without the network being manually saved for connecting to. Definitely something odd going on here. Also tried connecting to other networks to see if maybe it'd do something, but that didn't make my home network show up either. I'm at a dead-end here, and I assume the lack of replies means nobody else has any other ideas either... lol.
the only thing i can tell you is ruu that sucker, usually when something goes haywire stock will fix it. hope you get it working, sounds like a major pain
edit: if your up to it, flash a stock rom from clockworkmod recovery and try it before going the ruu route, its worth a shot. i see you tried cyanogenmod, couldnt hurt to try a stock rom.
Thanks, I forgot about that. After so many Android phones, I start to forget which tricks fix which phones... lol. Currently I'm used to "Superwipe your phone if anything goes wrong". Unfortunately, I know of no such thing for the Hero.
But running an RUU is a great idea, and I should've thought of it. I'll be doing that out as soon as I get off work
Edit: Just installed an official RUU successfully, but... still can't find my wireless network. Seriously... I have no idea how that couldn't work. The router is fine, the phone is fine, and they've communicated with each other just fine for the last two years. Nothing has changed for this to happen. For as complete a wipe as installing an RUU does, this just doesn't make any sense.
Try changing your router to chanel 11. Then in your hero WiFi settings make sure its on 11 as well. See if that helps.
#Root-Hack_Mod*Always\
Have you checked the settings on your router? It may be that somehow your router blocks your Mac address or something like that.
Sent from my Hero CDMA.