Related
Removed pending posting of instructions.
What is this for?
Thanx.
Prislav said:
Hi!
Subj - http://rapidshare.com/files/76444771/wzg3.7z
Click to expand...
Click to collapse
Sorry, not meant as a slam, but someone with only 21 posts, puts up a Rapidshare link for something to flash to a Wizard saying its HardSPL and no other instructions or information... Sorry (again, no offense meant by this) but I wouldn't flash something that is unexplained (if there is another post about this, then at least give a pointer to that in the first post).
FWIW: HardSPL is a way of making your device almost unbrickable. If it works like with the Hermes and Kaiser HardSPL, then you do the steps needed to install this, instead of the old CID unlock procedure of having to go back to the Button ROM and running lokiwiz.
But still, I'd be careful flashing something like this until more is known about it (the source, instructions for the method to install it, etc).
Totally agreed! I wouldn't go for it!
I don't mind to brick my wizard again!
mfrazzz
I with you agree, but...
I shall be immodest - please read ALL my messages ;-)
Instructions are not present because I do not wish to be responsible for another's nonsense. To whom it is necessary that will understand.
mfrazzz said:
Sorry, not meant as a slam, but someone with only 21 posts, puts up a Rapidshare link for something to flash to a Wizard saying its HardSPL and no other instructions or information... Sorry (again, no offense meant by this) but I wouldn't flash something that is unexplained (if there is another post about this, then at least give a pointer to that in the first post).
FWIW: HardSPL is a way of making your device almost unbrickable. If it works like with the Hermes and Kaiser HardSPL, then you do the steps needed to install this, instead of the old CID unlock procedure of having to go back to the Button ROM and running lokiwiz.
But still, I'd be careful flashing something like this until more is known about it (the source, instructions for the method to install it, etc).
Click to expand...
Click to collapse
Lokiwiz has been a trusted and faithful friend. Until I get more info, instructions, screeners even...I will keep using my trusted friend Loki.
No offense to the OP, but "read my other posts" doesn't tell us much. Your other posts are just like this one. Short and to the point, no real info given...nothing telling me how to install/run it. Nothing troubleshooting if an issue should arise. Read the Loki thread, or Dr. P's tutorial...everything anyone needs to know about Loki is there. Yours...not so much.
Hey, all I need is a "no-answer" answer from the poster and that's enough for me to hold back.
Prislav said:
mfrazzz
I with you agree, but...
I shall be immodest - please read ALL my messages ;-)
Instructions are not present because I do not wish to be responsible for another's nonsense. To whom it is necessary that will understand.
Click to expand...
Click to collapse
Very irresponsible attitude,don't post if you are not sure what it's all about,but if you post than have the courage to standby it.
i tried on my friends wizard not mine.. .copy alll those files on wizard.. and click spl.lnk..and see the difference...
zabardast_1 said:
Very irresponsible attitude,don't post if you are not sure what it's all about,but if you post than have the courage to standby it.
Click to expand...
Click to collapse
Very true!!
IF, you check his entries, other posts like this one have been made in other device sections. Now how all the mighty guru's here have somehow overlooked this ability, and he has manged to make it happen...
When a dev here releases something, it is does with so much info that if something does happen, a person KNOWS it can be fixed. To say:
Instructions are not present because I do not wish to be responsible for another's nonsense. To whom it is necessary that will understand.
Click to expand...
Click to collapse
Tells me this person really gives a sh*t less about whether or not my usage helps or kills my device. Real nice attitude there...makes me really confident about using the linky.
And to the poster above...you feel so confident about it that you tried it on a friends wizard??? If it does work, as you say, please give us more details about it...since we have none really.
Until we see some directions as well as a bit more transparency from the OP, I'm removing the link. OP, please PM me when you have fulfilled those requirements.
jwzg said:
Until we see some directions as well as a bit more transparency from the OP, I'm removing the link. OP, please PM me when you have fulfilled those requirements.
Click to expand...
Click to collapse
Thank you.
I certaily wasn't about to take the risk, especially with the attitude from the OP.
Again, thanks.
Guys dont bombard like this , Prislav has always presented raw content like this in Prophet forum also. Maintaining the terminology, just see diagram, might be useful- simple
But im not favouring any one. please!
I force nobody. Do not want, it is not necessary. To me it is not important.
Well this thread seems nice and hostile .
Unless I am missing something all Prislav has done is to use JumpSPL by Pof (Nice WinCE Tramp by the way ) to fire off a patched G3 SoftSPL and from there let you launch into the ROM update routine.
Prislav’s post may have been a little short on details but there is plenty of info on the board and in his previous threads on the subject. Pof's JumpSPL thread is also a goldmine of info.
Prislav also seems to have been kind enough to provide a patched 'flashable' SPL for G3 devices.
I have not tried this yet (my G3 junkers are at home, so I will tonight) but looking at the dumps of the files and the steps that Prislav has gone through I think this should work.
The SoftSPL seems to contain nothing dangerous and I test launched it on a G4 I have on my desk to no adverse affect (in fact it did almost what I expected, not sure it is putting the device into the correct 'wait for USB' state mind you but it does answer to prods from MTTY ).
Looking at the way the file is patched (and my limited knowledge in this area may let me down, I am more of an ARM Linux hacker) is very interesting. It also looks very much like this could be wrapped into a SoftSPL flashtool that just soft patches a G3 before flashing (and also gives users a choice to flash a HardSPL if wanted, just like we do with G4’s and most modern HTC devices).
Ok,
Just an update to my last post,
I found an old G3 with a broken keyboard under my desk. IPL/SPL 2.17, ancient radio and AKU2.
SoftSPL via JumpSPL from Pof/Prislav seems to work fine .
Converted the Hard-SPL.nb to an nk.nbf (with just the SPL in it).
Flashed the resulting nk.nbf.
Device is now running a patched SPL (2.H4).
Just upgraded device to WM6 from an off the shelf ROM (had Jag 4.0 handy) using the usual NVID update tool.
The end result is an old, unhacked WM5 G3 upgraded to WM6 in a matter of mins.
Download: I will edit this post when I get home and have had a chance to upload the files to my site. - Stuck at work right now.
Edit @ 22:00, 17th Jan: Download is now up here. Use with care and don't come crying to me (or Prislav ).
HowTo: Install PatchedSPL on a G3 Wizard (or just run a SoftSPL if you flash another OS ROM at step 7 with the included flash tool).
Warning: I have only tried this with 2.* IPL’s/SPL’s, I can’t be sure it will not brick devices running 3.* or 1.* IPL’s/SPL’s. It will be a few days before I can test this so if you have a 3.* or 1.* bootloader I would suggest you leave this well alone. Do not try this on a G4, there is no point and you may well brick it .
1: Install latest ActiveSync (If you’re upgrading from WM5-6 your going to need it)
2: Download the rar from my website.
3: Copy the contents of the “Copy to root of G3 Wizard device” folder to the ROOT of your Wizard using ActiveSync.
4: From File Explorer run the SPL shortcut from the root of the device.
5: Wait for the screen to go white (you are now running a patched SoftSPL running from RAM),
6: Unplug and reconnect the USB lead to the PC (you can check the connection with MTTY if your so inclined).
7: Wait a few seconds and start the ROM upgrade in “Flash-WizG3-PatchedSPL”.
If all goes well this will work just like a normal ROM update (without anything shown on your Wizard’s screen) and your device will reboot after a few mins.
Check the version of the SPL running, if it is SPL version 2.H4 all should be fine and your now running a CID unlocked device that can take any Wizard ROM.
John
What's the difference between CID unlock(using LokiWiz) and this proceudure (Hard Spl)?
AldoWeb said:
What's the difference between CID unlock(using LokiWiz) and this procedure (Hard Spl)?
Click to expand...
Click to collapse
To be honest, very little. Both leave you free to flash a ROM of your choice .
This just uses the same 'methods' as used with newer HTC devices and the G4 Wizards.
It will also be easy enough to wrap with ROM's to create 'G3' SoftSPL upgrades that flash to any G3 device without messing about. Just grab the installer, drop your nb.nbf of choice and run the upgrade.
I'll try and bundle up such an installer tonight if I get time.
Hmmm, why do I feel like I have hijacked this thread .
John
So You mean:
You can Create such an installer than given a certain NBF (OS) does even the CID unlock itself.
It would be great
Aldo
Hi. I flashes a signed-spl to my phone via update.zip, now the phone will not load in recovery, nor bootloader mode.
I have place a working .nbh (for BL mode)
and a working update.zip (for rec. mode) on my miniSD
if somebody could please assist me in getting this thing running again, that would be great. thanks!
I have exactly the same problem. Can anybody help?
Which spl did you flash......original, engineering, hard, or haykuro (danger)?
Please tell me you didn't flash the danger spl without installing the latest radio first....
http://forum.xda-developers.com/showthread.php?t=517593
oraeanast said:
Hi. I flashes a signed-spl to my phone via update.zip, now the phone will not load in recovery, nor bootloader mode.
I have place a working .nbh (for BL mode)
and a working update.zip (for rec. mode) on my miniSD
if somebody could please assist me in getting this thing running again, that would be great. thanks!
Click to expand...
Click to collapse
Sounds like you got an expensive paperweight!
Time for a new phone
i flashed spl-signed
whatever that is.. my phone was giving me a android.process.aboot (OR SOMETHING LIEK THAT) with an option to force close it only. I figured the SPL would help this situation.
oraeanast said:
i flashed spl-signed
whatever that is.. my phone was giving me a android.process.aboot (OR SOMETHING LIEK THAT) with an option to force close it only. I figured the SPL would help this situation.
Click to expand...
Click to collapse
No offense big guy but just downloading and flashing something that you had no idea about probably wasn't the best idea. Where did you get this mysterious SPL from? Perhaps we can help you trace it that way. It sounds as though you bricked though since you have little to offer in the way of retracing your steps so we can help you. What guide did you follow, what radio did you have?
What made you figure that an SPL upgrade would fix your force close error? Did you research any of this?
Yea just like what DirectMatrix said "What would make you think the spl would solve a FC issue".
DirectMatrix said:
No offense big guy but just downloading and flashing something that you had no idea about probably wasn't the best idea. Where did you get this mysterious SPL from? Perhaps we can help you trace it that way. It sounds as though you bricked though since you have little to offer in the way of retracing your steps so we can help you. What guide did you follow, what radio did you have?
What made you figure that an SPL upgrade would fix your force close error? Did you research any of this?
Click to expand...
Click to collapse
well i know that the SPLs allow installation of unfamiliar ROMs and allow them to work.. i did this before with a different one and it did the trick. that is why i repeated this process.
To be perfectly honest, this SPL was in my downloads folder and had worked before.. so i flashed it. I have attached the SPL so maybe somebody can check this out? I appolagize for my newbess and impulsiveness lol.
And i believe the radio was NOT v2 =[ i know thats bad..
THE ROM I FLASHED THIS ON TOP OF WAS JFV1.51_CRB43-ADP
oraeanast said:
well i know that the SPLs allow installation of unfamiliar ROMs and allow them to work.. i did this before with a different one and it did the trick. that is why i repeated this process.
To be perfectly honest, this SPL was in my downloads folder and had worked before.. so i flashed it. I have attached the SPL so maybe somebody can check this out? I appolagize for my newbess and impulsiveness lol.
THE ROM I FLASHED THIS ON TOP OF WAS JFV1.51_CRB43-ADP
Click to expand...
Click to collapse
The only SPL I have in my SPL folder that is that same file size is the haykuro danger SPL, so if you didn't update to the latest radio (2.22.19.26I) then I'm sorry to tell you, YOUR BRICKED!
oraeanast said:
well i know that the SPLs allow installation of unfamiliar ROMs and allow them to work.. i did this before with a different one and it did the trick. that is why i repeated this process.
To be perfectly honest, this SPL was in my downloads folder and had worked before.. so i flashed it. I have attached the SPL so maybe somebody can check this out? I appolagize for my newbess and impulsiveness lol.
And i believe the radio was NOT v2 =[ i know thats bad..
THE ROM I FLASHED THIS ON TOP OF WAS JFV1.51_CRB43-ADP
Click to expand...
Click to collapse
Yea thats the same spl I have on my pc that is the "danger" spl. Yep if you flashed that without having the newest radio then you are bricked my friend. And spl has nothing to do with allowing installation of unfamiliar roms. What that spl does is free up more space on our phones to be able to install the hero roms which are larger.
The md5sum of the SPL you posted is the same as Haykuro's danger SPL. What's quite worrying is that you had a 1.5 ROM but not the 1.5 radio, if you had the new radio you would not have bricked. I wouldn't be surprised if you had a few dropped calls on 1.5 ;-P You didn't read, flashed something you didn't know about and bricked. My sympathy for you = nil.
new thread idea
I was thinking on my drive home, maybe we should just start a thread titled
TO EVERYONE: FLASH THE RADIO BEFORE YOU FLASH THE DANGER SPL FOR THE MILLIONTH TIME!!!!!!
Just start the thread, have it stickied, and have it closed before anyone can post anything in it. Then people wouldn't even have to open a thread, they can just navigate to a forum and have it slap them in the face. Then of course the next logical step is just to start a forum with the same title, then all they have to do is get to the website.....the sad part is people will still brick..
My sympathy for Mr/Mrs. oraeanast ended quickly when I read:
i flashed spl-signed
whatever that is..
Click to expand...
Click to collapse
so I agree with AdrianK's ^^latest^^ post...
sucks for you man
and to be honest sounds like a case of the brickedfromnotflashingradio1stidus
jf4888 said:
sucks for you man
and to be honest sounds like a case of the brickedfromnotflashingradio1stidus
Click to expand...
Click to collapse
Nah, sounds more like brickedfromnotfollowinginstructionsandwarningspostedeverywhereitis...
h.nocturna said:
Nah, sounds more like brickedfromnotfollowinginstructionsandwarningspostedeverywhereitis...
Click to expand...
Click to collapse
awesome. im aware i ****ed it up but people telling me i ****ed up over and over doesn't really help either.
If anybody has ANY clue or discovers any where to reverse this.. or maybe force the phone into fastboot from the computer that'd be great
oraeanast said:
awesome. im aware i ****ed it up but people telling me i ****ed up over and over doesn't really help either.
If anybody has ANY clue or discovers any where to reverse this.. or maybe force the phone into fastboot from the computer that'd be great
Click to expand...
Click to collapse
Dude, you gotta calm down a little and try to understand where we're coming from. MODS, I know this is off topic but I feel I have to get this off my chest...>big breath<
[RANT]There are literally hundreds of places within this forum that tell you to flash the radio before the SPL. There are notes and warnings all over the ROM threads, there are hundreds, maybe thousands of posts regarding:
n00b: "I think I bricked"
person trying to help: "can you get into recovery"
n00b: "no, I was trying to flash the new SPL so I could get Hero"
person trying to help: "did you install the radio first"
n00b: "oh no, what's that"
Not to mention you, yourself, mention in your first few posts that you didn't know what it was, you just figured you'd flash it because you thought it would help with some kind of force close. When you do something like that, n00b or not, you are gonna take some flaming from the forum. Sorry this is just how these things work. There are thousands of people on these forums that spend weeks reading before they do anything to their phone, and there are just as many who read for 20 minutes and just start doing things. The very nature of a open forum of this type makes it difficult to have organized data. Everyone seems to understand that but some are unwilling to put in the time necessary to gather all the proper resources and data. Unfortunately, you seem like one of these poor people.[/RANT]
My only comfort to you now is go here and give your phone a proper burial....
DirectMatrix said:
Dude, you gotta calm down a little and try to understand where we're coming from. MODS, I know this is off topic but I feel I have to get this off my chest...>big breath<
[RANT]There are literally hundreds of places within this forum that tell you to flash the radio before the SPL. There are notes and warnings all over the ROM threads, there are hundreds, maybe thousands of posts regarding:
n00b: "I think I bricked"
person trying to help: "can you get into recovery"
n00b: "no, I was trying to flash the new SPL so I could get Hero"
person trying to help: "did you install the radio first"
n00b: "oh no, what's that"
Not to mention you, yourself, mention in your first few posts that you didn't know what it was, you just figured you'd flash it because you thought it would help with some kind of force close. When you do something like that, n00b or not, you are gonna take some flaming from the forum. Sorry this is just how these things work. There are thousands of people on these forums that spend weeks reading before they do anything to their phone, and there are just as many who read for 20 minutes and just start doing things. The very nature of a open forum of this type makes it difficult to have organized data. Everyone seems to understand that but some are unwilling to put in the time necessary to gather all the proper resources and data. Unfortunately, you seem like one of these poor people.[/RANT]
My only comfort to you now is go here and give your phone a proper burial....
Click to expand...
Click to collapse
My sentiments exactly... You've BRICKED your phone, not had a small glitch that we can fix. Its called brick for a reason because your phone is now only useful as a BRICK! Its not reversible at this time, nor would I suspect it to be reversible in the near future. Next time, read, read, read, read, read... and then read some more before you try to flash some mystery signed-spl.zip that you found on your computer...
yea i made the same mistake a few months back your fones at a better place now...No more updates, no more wipes or backups just ~peace~
would like to thank DirectMatrix for directing him to my **Obituaries** thread
-Plays taps
So, my husband wanted his firmware changed.... I made everything I did for my phone and everything was smooth. I mean I checked it is a pvt phone and that the radio is the 2.22.19.26I, so the last one.
I flashed the haykuro SPL downloaded from here putting it as update.zip in the sd, and doing alt+s in recovery mode. when the phone restrts it staks for minutes on the first g1 screen, and the only way to go out is to pull the battery out.
so what's appened? what I should do?
please help me!
iso67 said:
So, my husband wanted his firmware changed.... I made everything I did for my phone and everything was smooth. I mean I checked it is a pvt phone and that the radio is the 2.22.19.26I, so the last one.
I flashed the haykuro SPL downloaded from here putting it as update.zip in the sd, and doing alt+s in recovery mode. when the phone restrts it staks for minutes on the first g1 screen, and the only way to go out is to pull the battery out.
so what's appened? what I should do?
please help me!
Click to expand...
Click to collapse
Wrong sub-forum...your question belongs in the "Q&A" sub-forum!!!
Also your question has been answered a hundred times..."Please SEARCH before starting a new thread"!
Can you boot into recovery?
if you cannot boot into recovery holding home and end or camera and end with looping g1 logo, yes you are bricked.
If you can go back into recovery in any way shape or form, then no you aren't bricked.
iso67 said:
So, my husband wanted his firmware changed.... I made everything I did for my phone and everything was smooth. I mean I checked it is a pvt phone and that the radio is the 2.22.19.26I, so the last one.
I flashed the haykuro SPL downloaded from here putting it as update.zip in the sd, and doing alt+s in recovery mode. when the phone restrts it staks for minutes on the first g1 screen, and the only way to go out is to pull the battery out.
so what's appened? what I should do?
please help me!
Click to expand...
Click to collapse
if the radio is fine, the oldrom is incompatible with your SPL most likely..
so yes, you cn get into recovery and flash new firmware
viccyran said:
if the radio is fine, the oldrom is incompatible with your SPL most likely..
so yes, you cn get into recovery and flash new firmware
Click to expand...
Click to collapse
thank to all of you! yes I can get into recovery, and the firmware is quite old! so I'll take the sd out, put in ther the cyanogen fw and flash! really thanks! but since the phone is still stacking on g1 screen how to put the sd out? I think I should put the phone off before? if yes I have to take the battery off, may I do it?
zombierockstar said:
Wrong sub-forum...your question belongs in the "Q&A" sub-forum!!!
Also your question has been answered a hundred times..."Please SEARCH before starting a new thread"!
Click to expand...
Click to collapse
Who in the hell made you moderator. Of 42 posts, you will be absolutely amazed how much space you are taking up telling others to SEARCH. Have a looky here
Anyway, knock it off with the "search you fool" crap; leave the moderating to the moderators. At least if you're gonna show your butt, leave a constructive post wherein the confused member can find the help and read the rules.
Here, let me leave you an example.
Code:
Iso67, this question has actually been covered a lot here in the forum.
Most people will tell you to search, and perhaps you did.
Anyway, I know you are probably freaked out thinking you bricked your phone,
but I would have a gander [URL="http://forum.xda-developers.com/showthread.php?t=516440&highlight=bricked"]here[/URL] if you already haven't.
By the way...[I].[B]insert your own knowledge of problem here[/B][/I]
This community is about sharing; knowledge, expertise, insight, and much more. There are over 6 billion people on this planet. Do you think it might be possible that XDA is going to get people who think they can just pop on and ask questions without following board protocol? Of course there will be. You don't have to insult each and every one....and yes, flaming is insulting.
thanks again... it was as you said.. the old fw was to old, I flashed to cyanogen and everything was fine!
ps: I'm sorry if I posted in the wrong place, but I was really freacking. Actually I started to read the bricking post, but it seemed to me it would not solve my probls... I should have read more!
Ok i can see things heating up here, thread closed.... Pinetree, remember our discussion?
Hello everyone, I have questions on rooting a G1. Before I send in my old G1 and get a new one, i wanna root my new one when it comes in but i am really lost on rooting a G1 especially with the donut update. If anyone is willing to help me or give me a TUT on a good step by step how to do it, I would appreciate it.
Make sure your new phone has the right Board before you do nething to do that
turn off your phone
hold the Camera button(on the right side of your Dream/G1) and also hold the Power button(the red phone button)
make sure you have a PVT then im sure you should be ok
to exit this press all these buttons at the same time
The Green Phone+Menu Button+Power Button(Red phone button)
then go to this post and follow the directions to the T!!!!! and you should be ok to run Cyanogen it takes more to run Hero but just follow the guide if your phone has the correct stuff
http://forum.xda-developers.com/showthread.php?t=563679
^^^^^^^^^
Root Guide
Thank you i appreciate it, and what do you mean by board? I think most likely it will have 1.6 on it if thats what you mean.
And um what is PVT? lol
Theres 2 type of Mother Boards for the dream/g1 if im not mistaken and, from what i remember reading if you have the other board and not a PVT Board you cant root your phone but if you have a PVT Board phone you can root your phone im pretty sure, if it checks out go to the link i gave you follow the link to the T do everything they way it says do it unless the guide tells you otherwise and you'll have a rooted Dream/G1 before you know it
kk thx i will but how will i know if i have a PVT board or not?
when you
turn off your phone
hold the Camera button(on the right side of your Dream/G1) and also hold the Power button(the red phone button)
look at the top of the screen the first line it will tell you if you have a PVT but if its something diffrent from a PVT then dont do it but if it is then im sure you should be ok
to exit this press all these buttons at the same time
The Green Phone+Menu Button+Power Button(Red phone butto
Oh ok cool just did it my old one is a PVT, well the only thing is to call T-Mobile now and make up a lie for them to send me a new phone lol and then im good to go, but the only question i have left is after i follow that TUT, do i need to dl the Cyanogen program so i can get all these other ROMs? And thank you again i greatly appreciate it.
well when you do the whole root process your ganna have to download files to complete the whole "Root" process and your ganna have CyanogenMod at the end of the "Rooting" process so you'll be ok but when and if you get your new phone your ganna have to redo what i just told to to check if you have the PVT Board or not and once again if you do have it then you can follow the guide to the T and when you get done doing the rooting just come bak to Q&A im sure if not myself someone else will help you get Hero running if you have the tools to do so and no problem man im still a noob but i understand alot now so no worries your welcome
once again...pvt board is only required for the haykuro aka danger spl (1.33.2005)
B-man007 relax i saw that tip of yours after i posted this so chill
I know but you posted that before you saw it in my other thread, so i made a correction here as well. i was just correcting it so the op knew (look at the post times)
B-man007 said:
once again...pvt board is only required for the haykuro aka danger spl (1.33.2005)
Click to expand...
Click to collapse
sorry to bring this up again, just wanted to make sure I won't brick my phone.
I have a dream with DVT board
Does that mean I can do pretty much everything that PVT can do, such as upgrading to donut or cyanogenmod4.2.6, radio to 2.22.19.23 or 2.22.19.26I etc., except flashing haykuro's spl and things(rosie) that require it?
Hi everyone really sorry for opening a new thread for a G1 brick.
My G1 has stuck at the T-Mobile screen and on pressing Camera+Power i cant get into fastboot to restore using the .nbh file.
I am not able to get into recovery using power+home key also.
There has to be a way to get my dream back....
please please please help
JTAG or go for a replacement. I'm guessing it's a DangerSPL brick, right?
Danger SPL
Yes dude....
i have done this so many time.....
this time i forgot to update the radio first and this is stuck....
Someone should have a solution for this....
I read many thread which say use it as a paperweight...
I am not loosing hope....
XDA Member will have some solution.....
Maybe you should try to keep current on developments.
There is NOT A SINGLE REASON to use the deathspl.
As for your "poll"... what do you expect to learn from something like this? Do you realize that any numbers you get will be completely MEANINGLESS?
lbcoder said:
Maybe you should try to keep current on developments.
There is NOT A SINGLE REASON to use the deathspl.
As for your "poll"... what do you expect to learn from something like this? Do you realize that any numbers you get will be completely MEANINGLESS?
Click to expand...
Click to collapse
By adding the poll I am just trying to avoid post which says hey even i have the same problem.
I was upgrading to cm 5 which needs deathspl.
chinmayfun said:
I was upgrading to cm 5 which needs deathspl.
Click to expand...
Click to collapse
Aaaaannnnnd.... it doesn't need it
http://forum.xda-developers.com/showthread.php?t=704560
lbcoder said:
There is NOT A SINGLE REASON to use the deathspl.
Click to expand...
Click to collapse
Sure there is as its one if the few full engineering spls. And I don't think your latest development will ever be quite as user friendly (however some more configuration it will be very close)
The real user friendly fix/patch for 1.33.2005 (those that know what they are doing can decide if any benifit of the spl exists) is an assertion statement in the recovery script to check the radio version is not one of the two common 1.x ones.
(the evil patch is to make the assertion somehow also autoinstall the lattest Rogers e911 patched rom if the user has the 1.x radio. Because atm the rogers rom appears to be very safe from the user messing up the boot chain.. actually we may need to "perfect" the spl a bit more I think it will let us erase hboot)
I am still a newb to the android scene - and do believe I as well made the same mistake - and have bricked my G1.
If eveything I've read is accurate, I can purchase a donor phone - broken screen, or other issues - so long as the mother board is still good.
Swap out the new mother board for the bricked one, and have a working phone again - right ?
Have an opportunity on a donor phone - have no issues pulling phones apart, and putting them back together
But just want to make sure I understand the basics
Thanks in advance for any replies
Motherboard only option ?
Is replacing the motherboard the only option left ?
I am not sure i would be able to do that
Worst day of my life i screwed up big time
Any help is appreciated.
Some tool to recover back to original.
I can understand there is no way to repair as I am not able to get into recovery nor fastboot so cant adb also...
youtube
i checked the below video bt this is kinda a complicated and nt a solution for me
chinmayfun said:
i checked the below video bt this is kinda a complicated and nt a solution for me
Click to expand...
Click to collapse
There is no tool to get it back except by the options listed above. If you are not going to switch the mobos in the G1 then you won't be able to do the other option either. There is no software that can bring your G1 back after a deathspl.
protomanez said:
There is no tool to get it back except by the options listed above. If you are not going to switch the mobos in the G1 then you won't be able to do the other option either. There is no software that can bring your G1 back after a deathspl.
Click to expand...
Click to collapse
Thanks....
i will have to plan out on buying a new android....
had waited for a long time to get tht android phone from a friend in usa....
now there are many android phones available in india.... will have to start saving some money.... cant live without an android....
hey,
i had the same prob.
only thing,
mine bricke in cause of a radio update,
i tried all which was in my head,
and all i can do
but after some nights spending to my phone i found this:
i copied my nand backup to root of sd,
and connected it to pc
first he told me, device not known
so i tried to boot the modified recovery,
and *tada* i was in recovery mode,
plz try and tell me if it fix your problem,
for mine it did
best regards,
psycho
Mine is also due to radio update dude, before flashing spl the radio has to be flashed i and forgot to do that.
Will try out your suggestion, just hoping that it work and my g1 is back to life.
Ne ways appreciate your suggestion.
Please let me know if you were able to get into recovery mode prior to putting the files on the sd card.
And if you could tell me the list of files (if u had nething other then the nand update) which you put on the sd card, i can replicate the exact process.
Thanks,
Chinmay
Hope
Is there any hope to get the G1 back to life from the Death SPL Brick ?
You should read instructions carefully man. Its not that hard. You should always verify that you have a compatible radio before flashing DangerSPL.
There is a method to recover your device and it involves a lot of time and patience. Google "JTAG".
Sent from my HTC Dream using XDA App
"JTAG".
me too, my G1 Bricked (Not able to fastboot). but i wanna know if the JTAG method work 100%.please.