Related
Hi all,
first wanted to say that it is a great forum.
I just came across it couple days ago, and there has been many things that I found here that improved my Qtek 2020i.
but there is one thing that i havent found in here.
I use tomtom 5.21 with a bluetooth GPS receiver. it worked fine until I bought a bluetooth headset. If im using TT to navigate and answer a call via bluetooth headset it works fine, but when i hung up the call, then Qtek looses connection to GPS, then picks it up again in about 10 seconds but runs with a big delay. I have to restart tomtom and then it is back to normal (quite annoying when driving thru town)
any of you have that problem??
thanks for help.
Hi there,
My problem might be related : the device seems unable to use both the headset and the GPS (with TT) at the same time. I don't know why. I've got a Qtek ROM at the moment, I'll see if the latest O2 ROM with upgraded radio stack does any good.
See you.
Right. Just switched to PUG's .162 ROM with O2 stuff stripped.
Alas, it comes with Broadcom stack and there's no SPP inside so I can't connect to my GPS ... Pug if you read this, help
Cheers !
seems strange: I replashed my stock O2 bloatware & buggy 169 Rom with pug's flavour, to give me the 162 rom and Radio version 1.04.
My GPS bonds fine tihe BT, and I can use TomTOm and a BT headset at the same time. Did you flash the Radio to the (far better) 1.04) when you upgraded the Rom?
I've heard quite a few people say on these forums that for Alpine, one of the most stable & speedy setups is the 1.10 WWE Main Rom, the .162 Pug rom with the O2 stuff stripped out, and the 1.04 Radio.
Joe
Yeah actually it works fine now. I made another post while I was looking for help, because the Alpine wouldn't find the SPP service when interrogating the GPS. I simply switched the GPS off and back on, and the problem was gone. I wish I'd tried that before the dozen ROM combinations I spent the afternoon testing
And indeed, I'm now running 1.11WWE/1.04.00/1.11.162 PUGS w/o O2 stuff, and finally TT accepts to work with the headset while using the GPS. What a trip !
Cheers !
Is anyone able to use a BT stereo headset with the latest Ivan rom with ramdisk? I flashed it and installed the A2DP cab but even though it shows the service when pairing it doesnt allow you to set the headset as Wireless Stereo. Thanks
Need The CAB
@efjay...
Which CAB do you install to get the profile to show up?
Check this thread and grab the cab about 3 posts down... http://forum.xda-developers.com/viewtopic.php?t=48502
Cheers! Off to play with it now...
Seems Not...
Installed the CAB, paired my iTech headset, got the option to use the Wireless Stereo profile, ticked it, then went to the Paired devices and got the option for Handsfree only, no Stereo
Hopefully Logouts new AKU2.3 based ROM will include A2DP, or TuMa 1.5, once the baby arrives and he gets into a routine!
This cab will not work on ivans rom unless heavy patching is done, it is not compatible with msfp and aku2
Will any of them work?
Do you know of any A2DP CAB's which might work with this ROM, it's all that's not right with it for me... or even what patches/hacks are needed?
it needs to be an aku2 rom afaik, but if we can get bepe's fix working i should be able to upgrade it to 2.3 very soon
Midget_1990 said:
it needs to be an aku2 rom afaik, but if we can get bepe's fix working i should be able to upgrade it to 2.3 very soon
Click to expand...
Click to collapse
@Midget_1990
Goodluck! Waiting for the good news soon!
Yaantra
Hey guys,
I just finished installing the cab, Paired the device, also got the option to use hands free as well as Wireless stereo, checked it, but nothing much after that...
I guess the rest of you r in the same boat too?
Yaantra
don't try that cab, it is easy to build your own aku 2.3 rom read here
@xplode
building the rom is fine, it's kowing what to add for the A2DP profile to work which seems to have stumped us all... as above, even on the AKU2.3 ROMS we get the option for Wireless Stereo when pairing, but not when we try to set a profile!!
spkr4thdd, did you try the cab on your AKU 2.3 rom to see if it works then? And do you know if the AKU 2.3 rom is based on the original WM5 port by mamaich or the later Wizard ports?
yes, i tried the cab on all of the aku 2.3 roms so far, and a few of my own, however it's the old problem of getting the option to pair the device as hands free + wireless stereo, but when you try to activate a profile you only get the hands free option...
The source is not maimaichs old Wizard port it's a new dump provided by bepe on buzzdev... not sure where he got it from I recall a post a while before this one stating that the dump was available, and the source...
does anyone know what the newest version/build of htc audio manager is that will work with the kaiser. i've search for the different builds, and the only thing i can find is 1.02 build (409.721), and i'm starting to wonder how updated it is because i know i downloaded this one months ago. just curious because i dont know if it is because of wm 6.1 on my tilt, but it was extremely buggy today w/ my bluetooth headset (worse than with wm6)
I have some problems with my HTC S730 with the Parrot MK6100. I was hoping that HTC would release an updated ROM, but the latest update doesn't fix anything that was really broken.
Maybe an unofficial WM6.1 is better, but I want to make sure that it has a better BT stack then the HTC ROM, before giving up some features...
Hello,
Sorry for my english (it's very very bad)...
I have a Wings and i use the parrot MK6100 with it
the problem is the linking, 2 or 3 test and reset "phone and bt car kit" for it works and after all it good for the hands free and wireless stereo (very good sound on car)
sorry i have a wings with WM6.1 WWE but before i have WM6 FRE and it worked too
When I flash my HD with a 1.56 cooked rom, I'm unable to connect with my handsfree. I can pair with the handsfree through bluetooth but I can not hear or speak to anyone.
If I flash with the stock HTC 1.56 rom, I can pair and talk through the handsfree.
Is there a fix for this? I've tried several cooked roms and the outcome is the same.
Thanks!
backstep said:
When I flash my HD with a 1.56 cooked rom, I'm unable to connect with my handsfree. I can pair with the handsfree through bluetooth but I can not hear or speak to anyone.
If I flash with the stock HTC 1.56 rom, I can pair and talk through the handsfree.
Is there a fix for this? I've tried several cooked roms and the outcome is the same.
Thanks!
Click to expand...
Click to collapse
I have DavidEuck 8.5 running and the bluetooth handsfree with my JVC carkit works fine. Can you try to pair with another bluetooth handsfree set and see if thats works fine? I would recommend at least upgrading to the latest radio.
backstep said:
When I flash my HD with a 1.56 cooked rom, I'm unable to connect with my handsfree. I can pair with the handsfree through bluetooth but I can not hear or speak to anyone.
If I flash with the stock HTC 1.56 rom, I can pair and talk through the handsfree.
Is there a fix for this? I've tried several cooked roms and the outcome is the same.
Thanks!
Click to expand...
Click to collapse
i have the same problem with most of the cooked roms specilly some times i can not hear the voice of other party this problem arrises with Miri's rom that i like it and Duty's rom that is very famous
for me stock roms and kwbr rom works fine
i have tested 3 devices Motorlla car kit, the expensive new Nokia sterio bluetooth headphone and sony erecsson sterio bluetooth head phone they all have problem with some cooked roms; i hope i can find a wm 6.5 rom that does not have this problem specially with good memory management like miri and kwbr that doesn't eat lots of memory.
Me, too. I am using daviddeuck v6. After 3 weeks sometimes it works and sometimes I cannot hear the other party.
I tried 2 jabra models with the same results.
Same issue
I had the same issue with my parrot 3200LS and Dutty's extreme 2.2/ Laurentius26's L26_THDV2.2_Ultimate Roms.
I even tried JETware Hands-free Extension for Windows Mobile phones (http://www.jetwaremobile.com) --supercool program btw!
But all to no extent.
Reflashing back to Laurentius26's L26_THDV7.5_WWE CE OS 5.2.20769 (Build 20769.1.4.5 L26) ROM "solved" the problem for me.
Now I get my phone's ringtones through my parrot (and thus my car-hi speakers ). Hope the problem is solved in newer roms...
(Btw, great job with your ROMs guys!! )
Y
Happens to me to.
ROM:
dutty v3.4
perhaps we could make a List of working/not worling Roms.
For me it's an essential feature for ROM choice.
Epecially bought a Radio for this feature...
Almost same for me.
Duttys v 3.4 ROM
Ford Car Kit (just talk, no music) connects and works without any problems.
iTech Clip R35 (A2DP, AVRCP) will not pair at all.
(I don't know if the profiles mean anything. Just remembered that there was a lot of talk about supported profiles in the R35 manual.)
brgds
Royan
Use Onkologs Lite-Rom and it works perfect.
I found i couldnt pair my phone with a few handsfree devices i was testing in a shop - seems there is a problem with the bluetooth stack and the newer roms. Odd this hasnt been reported sooner
i feel there is a problem with the configuration between windows and manilla some where or the driver for blue tooth is not complete that is why it loses the connection somewhere for most of the cooked roms
I agree, there must be something wrong with the bluetooth stack.
When I use a 1.14 ROM, I can hear and speak to people through my hands-free. But, when I flash a 1.56 ROM all I get is "dead air" when I answer a call through my hands-free.
I've tried flashing to Dutty's, Miri's, Laurentius26's, Topix's and a few other rom's, with the same result, I am unable to hear & talk to the other person on my hands-free.
I also tried updating to the 1.14 radio and I've tried older radio's and I still have the same problem.
Starting July 1st, my state will require drivers to use hands-free devices when dialing and driving.
backstep said:
I agree, there must be something wrong with the bluetooth stack.
When I use a 1.14 ROM, I can hear and speak to people through my hands-free. But, when I flash a 1.56 ROM all I get is "dead air" when I answer a call through my hands-free.
I've tried flashing to Dutty's, Miri's, Laurentius26's, Topix's and a few other rom's, with the same result, I am unable to hear & talk to the other person on my hands-free.
I also tried updating to the 1.14 radio and I've tried older radio's and I still have the same problem.
Starting July 1st, my state will require drivers to use hands-free devices when dialing and driving.
Click to expand...
Click to collapse
after trying almost all the new roms i returned back to the latest stock rom (28-4-2009) Bluetooth and every thing works absolutely perfect and it has got excellent memory management (only 32% with full loaded program), i use this rom when i want to rely on my HD.
by the way i think all the kwbr roms also works fine with bt. i wish i can find a 6.5 rom that works fine with blue tooth and has got good memory managemt, just waiting may be miri will do something, his rom got good memory management that is very imprtant for me
After the "SD card not shown", this is another weird report by using cooked ROM
has anyone got bluetooth devices to pair with a cooked 6.5 ROM ?
if not this is a pretty major problem ??
Yes I have.
I just got Miri's V15 pairing with my factory fitted Range Rover bluetooth kit and it works perfectly including giving access to the address book.
Previously I was using WM6.1 and many of Dutty's ROMs and I had intermittent drop outs with the car and phone.
Miri's ROM has upgraded my radio so I can't be sure if WM6.5 fixed the problem or if it was the new radio, but for the first time in 6 months I actually have a working hands free kit in my car
Royan said:
Almost same for me.
Duttys v 3.4 ROM
Ford Car Kit (just talk, no music) connects and works without any problems.
iTech Clip R35 (A2DP, AVRCP) will not pair at all.
(I don't know if the profiles mean anything. Just remembered that there was a lot of talk about supported profiles in the R35 manual.)
brgds
Royan
Click to expand...
Click to collapse
Well, that's me fixed...
Both car and iTech Clip works with Duttys 3.7/2.1 ROM.
And I'm ashamed to say; that the clip didn't connect earlier was my fault...
I used default code 0000 as stated in iTech's documentation, not the real default code of 8888...
Once I used the correct code, all was well...
brgds
Royan
I am using now Laurentius 2.1. My bluetoothheadset that suports only handsfree talking works properly. With my Jabra BT8010 only stereo music works, handsfree is a game of luck.
Hope any ROM expert will fix this in the future. For me it is one of the most important features of my TOUCH HD.
working!
Hi,
yesterday I flashed to Duttys 3.9 Turbo - and I love it!
BT works as A2DP & Handsfree!
beside it's very fast - what else we need
frottage said:
has anyone got bluetooth devices to pair with a cooked 6.5 ROM ?
if not this is a pretty major problem ??
Click to expand...
Click to collapse
Using Energy's 6.5 june 16th version.. Works PERFECT with my brand new Nokia BH-904 (which also is great)
it works in miri's rom as well plus you have lots of free memory when you really need it