Database Develop

Never ending reboots.

Hi,
I think i installed a bad room in my HTC HD, and since then it has never ending reboots.
I already tried to hard reset but it stays the same.
The screen that shows is white and as an brand saying China Mobile and dopod T8288
Can anyone please help me?

i had something similar!
Mine said "Smart Mobility" and than restarted again and again and again!
Until i took out the Battery and made a Soft reset. Then it worked again!

DarkWolve said:
i had something similar!
Mine said "Smart Mobility" and than restarted again and again and again!
Until i took out the Battery and made a Soft reset. Then it worked again!
Click to expand...
Click to collapse
Tried that, but it remains the same.
Thanks.

On mine its always Smart mobility message when booting.. Try to reflash a new rom from SD card! It should work.

Ive had the same issue recently..
Your best bet is to restore stock SPL from HardSPL thread.
Then use USPL to flash a new ROM, once installed perform a hard reset.
This did the trick for me.

that chs rom is only for T8288, i tried it too. go into bootloader mode and flash a new rom.

Please help, I think I bricked my phone :(

Sorry if I shouldn't be writing a new thread about this, but I couldn't find a thread about bad flashes...
I'm a newbie with this, and I think I just bricked my phone after only my second flash I have a Touch Pro 2 (T-Mobile), and I was able to successfully install HardSPL. I even flashed the EnergyROM LEO with no problems. After a few days of playing around, I tried to flash the AthineOS v2.0 ROM, and now my phone won't boot up... it gets stuck in the Touch Pro 2 black screen with the red lettered version numbers at the bottom. I tried rebooting and pulling the battery out, but I have had no success in being able to boot it back up.
Any ideas on how I can fix this? This sucks I've only had the thing for less than a month...

localcall001 said:
Sorry if I shouldn't be writing a new thread about this, but I couldn't find a thread about bad flashes...
I'm a newbie with this, and I think I just bricked my phone after only my second flash I have a Touch Pro 2 (T-Mobile), and I was able to successfully install HardSPL. I even flashed the EnergyROM LEO with no problems. After a few days of playing around, I tried to flash the AthineOS v2.0 ROM, and now my phone won't boot up... it gets stuck in the Touch Pro 2 black screen with the red lettered version numbers at the bottom. I tried rebooting and pulling the battery out, but I have had no success in being able to boot it back up.
Any ideas on how I can fix this? This sucks I've only had the thing for less than a month...
Click to expand...
Click to collapse
hi if you have done the hardspl then try this
to enter Bootloader
Remove the back cover from the phone.
Hold the Volume Down button.
Use the stylus to press the reset hole.
Or if the device was powered off, press the power button whilst holding down the Volume Down button.
you should see serial at the bottom of the three color screen then plug in the usb cable the serial should change to USB then just flash another rom.
i hope this helps you.

Thank you! Thank you! Thank you! Thank you! That worked! That's a really cool recovery feature from HardSPL... you guys really know what you're doing This is such a huge relief...

localcall001 said:
Thank you! Thank you! Thank you! Thank you! That worked! That's a really cool recovery feature from HardSPL... you guys really know what you're doing This is such a huge relief...
Click to expand...
Click to collapse
only to pleased to help I am glad you got your phone back working

localcall001 said:
Thank you! Thank you! Thank you! Thank you! That worked! That's a really cool recovery feature from HardSPL... you guys really know what you're doing This is such a huge relief...
Click to expand...
Click to collapse
hehehe finally you found solution.. but my rom does not have any problem.. somethings goes wrong

b16b said:
hehehe finally you found solution.. but my rom does not have any problem.. somethings goes wrong
Click to expand...
Click to collapse
idd, this is not ROM related, its just unlucky like hell. See the phone as a PC, where blocks need be written. If a block fails or is corrupt, you get these jokes. Its like a BSOD on a Windows PC.

I gotta admit it is great knowing that once you've done a hardspl you are safe as houses as even if you flashed the most currupted ROM, the bootloader will always allow a reflash.
This is way more stable and safe than any other experience I've had of phone flashing.

b16b said:
hehehe finally you found solution.. but my rom does not have any problem.. somethings goes wrong
Click to expand...
Click to collapse
Funny that, your latest ROM was the only one I had problems with - the same problems as the original poster, in fact. I flashed a different ROM fine, re-downloaded your 2.0 and flashed it again, same problem. Hanging on the boot screen.

b16b said:
hehehe finally you found solution.. but my rom does not have any problem.. somethings goes wrong
Click to expand...
Click to collapse
Probably I think I was just unlucky. My fear (while I was panicking) was that your ROM is European based, and since mine came from T-Mobile, it didn't mesh well. I also didn't unlock my phone so that could be also be a problem...

awesome community

localcall001 said:
That's a really cool recovery feature from HardSPL...
Click to expand...
Click to collapse
well..this is a normal recovery feature for stock spl also

Same Issue
I had the same issue with AthineOS v2.0 ROM it gets stuck on Touch Pro 2 logo

wahida76 said:
I had the same issue with AthineOS v2.0 ROM it gets stuck on Touch Pro 2 logo
Click to expand...
Click to collapse
no one have told me that on my thread... only here i found this issue.. and finally how pass the problem?

I had to re-flash a different ROM.
I'm wondering if it's related to the radio version...

what is your version of radio
can't you flash the latest 23060?
i use radio 3.36

I've used 4.49.25.05 and have just got the same result on 4.49.25.17
I'll try flashing 3.44.25.27 (the oldest in the radio thread) and re-flashing your ROM.

Alas, no luck with that one either.
I have no idea why it doesn't seem to work on my Rhodium :/

I'm sorry if I'm hijacking this thread but it's the only one I've found that's even close to having the same issue I have, though I'm still using the stock rom/os.
I was installing winmo msn messenger. It installed fine and reset my tp2 fine. It goes thru the tp2 splash screen, the verizon splash screen and the winmo splash screen. Then it shows owner information and this is where it gets screwed up. Owner info will stay up forever if I dont touch the screen. After touching the screen the only thing left will be the top bar and the rest of the screen stays black. The only things on the top bar are the signal icon (which always has an x), the wifi icon (which seems to be connected fine lol) and either owner info will still be in the upper left or the start menu will be there. Hitting the screen only causes my tp2 to beep.
Nothing I know how to do (which is basically just hard and soft resetting it) works. Verizon can't fix it (didnt think they would be able to) and I can find no drivers (possibly cause I'm still a noob with winmo) to resolve my issue. I'm not even sure how I'd get them on as it wont even sync up to my computer and my computer cannot find its hd. If I could get a rom for the verizon one I think I can figure it out from there with no issues...but htc website sends me to verizon website for support and vice versa. The htc wiki is the closest I've gotten to an answer...but no rom to download. The only OEM roms I can find anywhere aren't for this phone, unless one of those will work? You guys are the experts.
Does anyone know what I can try? Verizon wants me to return it but cannot tell me when I'll get my new one as they are out of stock...again. Please help lol! Thanks for any and all help.

Mr.Clark said:
I've used 4.49.25.05 and have just got the same result on 4.49.25.17
I'll try flashing 3.44.25.27 (the oldest in the radio thread) and re-flashing your ROM.
Click to expand...
Click to collapse
i using this..
*Change the radio to 3.46.25.30 (Hot Fix For GPS Lock)
and also try the latest release of my rom.. (maybe you have bad file bad download)

b16b said:
i using this..
*Change the radio to 3.46.25.30 (Hot Fix For GPS Lock)
and also try the latest release of my rom.. (maybe you have bad file bad download)
Click to expand...
Click to collapse
Sorry, I tried that one as well yesterday. And I've downloaded your ROM a few times too...
Are you still working on the 6.1 ROM? Maybe a new version will just magically start working for me...
EDIT: Tried a fresh 3.46.25.30 and a fresh download of your ROM. Still nothing

Help, BIG problem

Guys I have a big problem, please try to help me.
Ive been having my Touch Diamond for over a year now. I started to flash it 6month ago. I followed all the steps with Hard SPL and radio and then ROM.
I have been using BSB6.5 roms since the first day. But now recently when I upgraded to bsb6.5.1b, my phone after a couple of hours or (if am lucky) one day hangs, then I soft reset it then it takes long time to start then suddenly ALL applications and programs in the phone starts and then the phone warns me about program memory and then it hangs. I tried to flash over and over again but the problem still come back. Could someone please help me ? Someone had the same problem?
(I ALREADY SEARCHED FOR A THREAD WITH THE SAME PROBLE)

wow that is strange, try going back to a wm 6.1 rom than back to your 6.5 roms. Sometimes this causes quite a few weird problems like yours.
and remeber to hard reset at least twice between roms

I´ve read before in a thread how to reset the phone (boot, Hardspl, rom) back to its original form/condition. I tried to search and find that thread but i couldnt find it. Do you got an idea where I can find it ? I thought maybe I can try to do everything from scratch will help.

Is this wot you need big http://forum.xda-developers.com/showthread.php?t=537496

ooh yes...thanks man appreciate

i would recommend you try the mtty method once:
http://forum.xda-developers.com/showthread.php?t=540290
good luck

yeah he has a point big, use mity to format your device, maybe you solve the problem without having to flash stock spl

big problem with touch hd

hi all!
i got a big problem with my touch hd...
after flashing several roms, i flash since miri V20, my phone startet to hang very often. everything is working fine after flashing, but when i want to use opera via wifi for example it hangs - even the hardkeys aren't responding anymore. after a soft reset it shows the "smart mobility screen" and does nothing anymore, only after a hardreset the phone boots again. this behavior startet with flashing the 6.5.x ROMs i think, before that i had no problems. i'm using radio 1.17.25.09 and xannytech ROM evo 1.4 right now.
i flash via hspl and yes, i did a hardreset after every flash
any idea what i can do to get back a working phone?
thank you!

hm... have you done the HR after flashing - I mean really after flashing including the base-program installation. Try to install new rom fully, then HR.
Otherwise it does not look like the rom problem. Maybe ur wifi is broken?...
Then - have you combined good XIP, RIL and Radio? I read here in the forum a good combination is needed or the phone could hang sometimes...
(Generally - I do not want to scare you however I think it is really a HW problem)

yes, i did the hardreset every time directly after flashing the ROMs.
hmm, i think i try another radio and flash again, when it behaves still wired you could be right an its a HW problem -.-
the wifi works well when i update weather or download quickgps data, so i don't think its broken. i had this behavior even when i wanted to change my background wallpaper in the last xnor ROM...
its really strange Oo

you can also try to flah a stock rom firts and then do the normal flahing procedure of the rom you want
sometimes it is possible that the prvious rom leaves traces arround on youre phone that doesnt like the new rom and therefor it could hang
so try to flash a strock rom first and then the rom you want maybe it helps
best regards
miniterror

MjØlnir said:
hi all!
i got a big problem with my touch hd...
after flashing several roms, i flash since miri V20, my phone startet to hang very often. everything is working fine after flashing, but when i want to use opera via wifi for example it hangs - even the hardkeys aren't responding anymore. after a soft reset it shows the "smart mobility screen" and does nothing anymore, only after a hardreset the phone boots again. this behavior startet with flashing the 6.5.x ROMs i think, before that i had no problems. i'm using radio 1.17.25.09 and xannytech ROM evo 1.4 right now.
i flash via hspl and yes, i did a hardreset after every flash
any idea what i can do to get back a working phone?
thank you!
Click to expand...
Click to collapse
It has been known that if you constantly flash your HD, sometimes this can cause HD to hang/freeze etc. A method which seems to fix this is to return to stock rom, then use dummies guide to flash cooked rom again

thank you all guys!
i will flash back to stock ROM as mentioned and then flash my fav custom ROM.
i let you know if the problem is solved then.
thx again!

Hi to all , could we know finally what you did so make your phone work again ?

yes, I'm interested too.

I had similar problems, no matter what rom i tried i had freezes and hang ups, and strange behavior, and after flashing stock rom and then another rom smooooth sailing all the way since so i reckon its a good thing to do every fifth flash or so.

hi all!
think i solved my problem by flashing the latest stock ROM as advised by other users. after that i flashed my prefered custom ROM and now the device flies Oo respond time is much much better, no lags or hangups till now...
i'm happy again
greetings

Sprint Diamond Error, Please Help!

I've searched and asked for help for months and I can't find anything.
My Sprint Touch Diamond is F'd. I tried flashing an unofficial ROM to it, and on the reboot process, it won't turn back on. In fact, it constantly resets...every time I turn it on, or even placing it on the charger it will turn itself on and keep resetting.
I need to know if it's bricked or if there is anyway of getting it to work again. Someone please please please help, im pretty desperate for advice. Thanks in advance.

Did you install the HardspL? Anyways try to hold down the volume down button and the power button while you push the reset button. If it brings you to a multi-colored screen connect it to the USB and flash another Rom. Make sue it is a CDMA if your phone is CDMA.

Yeah, if you can get it into bootloader you should be able to reflash the shipped rom from your carrier. Use the exe. I would flash it at least twice.

i believe its cdma. it was brand new from sprint.

Lawler said:
I've searched and asked for help for months and I can't find anything.
My Sprint Touch Diamond is F'd. I tried flashing an unofficial ROM to it, and on the reboot process, it won't turn back on. In fact, it constantly resets...every time I turn it on, or even placing it on the charger it will turn itself on and keep resetting.
I need to know if it's bricked or if there is anyway of getting it to work again. Someone please please please help, im pretty desperate for advice. Thanks in advance.
Click to expand...
Click to collapse
Hi Lawler read this first >>> Click Here
Then Here >>> Click Here
HTC Stock Rom >>> Click Here
If you can get into bootloader mode(press vol down + power)until you see the tricolor bars then you're ok you can either flash the stock rom or unlock it then install a custom rom.
HTH

ive searched these forums for an answer for months and have found nothing, It wont go past the boot screen. Ive tried about ten different roms, which have worked before. Hard reset doesn't do anything, and MTTY is a joke. I am willing to pay anyone who can help me get this thing working, im a desperate man at the moment!

ive searched these forums for an answer for months and have found nothing, It wont go past the boot screen. Ive tried about ten different roms, which have worked before. Hard reset doesn't do anything, and MTTY is a joke. I am willing to pay anyone who can help me get this thing working, im a desperate man at the moment!
Click to expand...
Click to collapse
Can you get it into the bootloader? If you cant then your probably out of luck. If you can, flash HSPL, unlock your phone, and flash a ROM.
Sent from my XDANDROID using the XDA mobile application powered by Tapatalk

Yes, it goes into the bootloader. I've flashed a hard spl, it's unlocked. I just tried your rom that makes 12 that I've tried. The same thing happens. The phone turns on to the Touch DIAMOND screen with the red rom info on the bottom and it will not go any farther. Hard resetting does the same thing. I've tried using MTTY, I've tried stock sprint roms.
I know i can get it to work. This same thing happened before and my diamond didnt work for months. One day i decided, ill give it another try and flashed pegasus 6.1 and it worked like a champ ever since. I tried like 4 other roms too and they worked just fine.
I was using PMD's 2.5 rom when it crashed. I deleted all of my text messages, and then the phone froze and didn't turn back on. When I tried to reflash the rom is where im at now...stuck in the boot screen.

I've never been in the bootloader on my Diamond myself, it won't open
If there are diagnostics tools, try them out. Also try flashing on a different PC and OS or with a different cable. Disable antivirus software may also help.

I think I'm sol man. Still no luck.