Database Develop

Siemens SX66 ROM Update Issue

I have a Siemens SX66 Cingular branded PPC. I downloaded the latest Official ROM Update but get the Wrong Country ID error. I found out that this was due my phone being an AT&T varient even though the phone says Cingular. So I wanted to know is anyone has the original ROM update that came out before the Siemens-1.33.10-Full_Update and if so could provide it to me thank you in advance. I need to put an offical rom back on my phone so I can send it back to cingular so they can send me a replacement phone.

Go to the SX66 Standardization Project to get the most recent ROMs for the SX66; they have both Cingular & ATT versions.

I went there but it's not an official version number which cingular will check for.

hakushox said:
I went there but it's not an official version number which cingular will check for.
Click to expand...
Click to collapse
Try following the instructions here:
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_Upgrade_Errors
You will need to run the upgrade a second time for it to install, the first time clears the previous contents, the second time the upgrade should run.

That wont work already tried that. Thankz for the resond though. BTW how do you like that new wizard OS on your sx66?

hakushox said:
That wont work already tried that. Thankz for the resond though. BTW how do you like that new wizard OS on your sx66?
Click to expand...
Click to collapse
Did you edit the .conf file as outlined in step 4? This worked for me. You may also try the MaUpgradeUt_noID route as well.
I prefer WM 2005 over 2003 I'm willing to work with the warts and try to advance the ball

Ya it gets rid of that error but then i get a error in the checksum

hakushox said:
Ya it gets rid of that error but then i get a error in the checksum
Click to expand...
Click to collapse
go back and make sure you have edited the editfix.bat file correctly, there is a set of three lines to recalculate the checksum and update it for each of the nba files (xda3nbftool -c -u ?????.nba).

hakushox,
The only way to get back to an officially supported ROM on the AT&T variant of the SX66 is with the MaUpgradeUt_noID. Now, I have not tried this, but here is what you'd need to do. Download the official Siemens update for the 1.33.10 System, and launch it. Once the first screen screen appears, open the Windows File Explorer, and search for nk.nbf. The one you are looking for will exist in a temp directory, and will exist with ms_.nbf, and radio_.nbf. Copy these files to a easy to find directory as these are the files you'll need to do the downgrade with. Cancel the offcial upgrade tool. Now, download the MaUpgradeUt_noID tools from this site, and extract it to a directory on your computer. Copy the .nbf files into that directory. Now, place your phone into boot loader mode, and place it in the cradle. Wait a few minutes for the OS to detect the "new" sync device. Finally launch the MaUpgradeUt_noID tool, and step through the screens. Once completed, it will place System 1.33.10, Radio 1.06.02, and Extended 1.33.110 ROMs on your device.
This works because the MaUpgradeUt_noID tool does check the ROM ids, and will let you flash any IDed rom onto your phone. As you can imagine, it is a rather dangerous tool if you don't have a good idea what you are doing, which is why I have tried to get it away from the Standardization project.
-Chris

Worked like a charm much thanks

Excellent!
-Chris

I tried uploading the original SX66 Cingular rom to the FTP but for some reason its not responding, if some one wants it email me and I will send it.

SysCrasher13 -
I am interested in downloading the factory Siemens SX66 firmware, after upgrading the firmware my SD slot no longer recognizes SD Memory... very strange.
Please let me know where to download the factory firmware.
Note: I have (2) SD PNY cards that work fine in my PPC4100, however, my SX66 doesn't recognize either card and wondering if this maybe a compatibility issue. I'm going to swap the 512MB with a SANdisk tomorrow to see if this rectifies the problem. Can anyone confirm SD compatibility issues with the SX66 --- is there a SD Memory quick reference chart available for the SX66?
Mike

Let me know if anybody has any ideas before I send it in for repairs...
Thanks - Mike

Best Rom for my T-Mobile Vario

I got now:
IPL, SPL: 1.03
GSM: 1.4.10.0
OS: 1.3.2.3
ROM versie: 1.3.2.3 NLD
Radioversie: 01.04.10
Can you tell me.. do i need to upgrade? What will be better when i upgrade?
With which ROM do i need to upgrade?
Please help.

Qtek ROM version 1.6.7.1
In my humble opinion; Qteks 1.6.7.1 ROM is the most stable ROM to date. Everything works perfectly for me with all my 3rd party software installed too!!
PS if you haven't already done so, you can totally unlock your phone from T-mobile by following the following instructions. Also do searches for the quted software (download them first):
mackaby007 said:
abgarman said:
hey mackaby007!
I wonder whether you had any problems during new rom installation...
I tried this ROM, but after the installation was finished, Etx_rom installed and system rebooted I got a "device locked message. illegal ROM, given only to customers who bought their wizard/qtek at ...[]" I had to go back thru several instals to restore my original ROM (which i never truely accomplished - i have no ability to change ring tones and assign them to different contacts)
Click to expand...
Click to collapse
Hey back at ya.
First download lokiwiz v2b. Don't use previous versions or you'll not get through this!!
Hard reset your device (not necessary, but it ensures you'll have no hassle with Activesync).
Done that? Good. Extract the lokiwiz v2b .zip folder and copy enablerapi.cab to your memory card or to 'My Documents' folder on your device. Then execute the 'enablerapi.cab'.
Done? Just switch off the device (power button; put it in standby mode).
If you have Activesync already installed, un-install it and re-install directly afterwards (ensure a brand new partnership).
Then when prompted by Activesync, plug in your USB cable PC-PPC and it should recognise as usual.
Then execute the lokiwiz.bat file (in the folder that was generated earlier when you extracted the lokiwiz02b.zip file) and when you see the MS Dos (black screen) choose the option CID Unlock (SuperCID) and wait for it to COMPLETELY finish. You'll know it's finished when your Wizard is re-booting. Plug out your USB cable at this stage.
Once re-booted and back into WM5, re-connect your cable and if all goes well it should re-connect to Active Sync (wait till it has finished syncing or says connected!).
Finally......double click the executable file, which should be:
RUU_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe
Hopefully it will now install the ROM without hiccups (about 10 minutes).
Hope this helps. let us know how you get on.
Click to expand...
Click to collapse

I searched the whole forum.. I i unlocked my Vario 15 minutes ago. Thanx a lot!!

Re: Qtek ROM version 1.6.7.1
Will the follwoing also work with the Cingular 8125. I haven't SIM unlocked it yet. Also, is a SIM unlock the same as a CID unlock. Is there tow different things that need to be unlocked. And which do I do first, if there are two things that I must unlock. Thanks for the help...and sorry if this questions has been answered before...
-OnImpulse-
mackaby007 said:
In my humble opinion; Qteks 1.6.7.1 ROM is the most stable ROM to date. Everything works perfectly for me with all my 3rd party software installed too!!
PS if you haven't already done so, you can totally unlock your phone from T-mobile by following the following instructions. Also do searches for the quted software (download them first):
mackaby007 said:
abgarman said:
hey mackaby007!
I wonder whether you had any problems during new rom installation...
I tried this ROM, but after the installation was finished, Etx_rom installed and system rebooted I got a "device locked message. illegal ROM, given only to customers who bought their wizard/qtek at ...[]" I had to go back thru several instals to restore my original ROM (which i never truely accomplished - i have no ability to change ring tones and assign them to different contacts)
Click to expand...
Click to collapse
Hey back at ya.
First download lokiwiz v2b. Don't use previous versions or you'll not get through this!!
Hard reset your device (not necessary, but it ensures you'll have no hassle with Activesync).
Done that? Good. Extract the lokiwiz v2b .zip folder and copy enablerapi.cab to your memory card or to 'My Documents' folder on your device. Then execute the 'enablerapi.cab'.
Done? Just switch off the device (power button; put it in standby mode).
If you have Activesync already installed, un-install it and re-install directly afterwards (ensure a brand new partnership).
Then when prompted by Activesync, plug in your USB cable PC-PPC and it should recognise as usual.
Then execute the lokiwiz.bat file (in the folder that was generated earlier when you extracted the lokiwiz02b.zip file) and when you see the MS Dos (black screen) choose the option CID Unlock (SuperCID) and wait for it to COMPLETELY finish. You'll know it's finished when your Wizard is re-booting. Plug out your USB cable at this stage.
Once re-booted and back into WM5, re-connect your cable and if all goes well it should re-connect to Active Sync (wait till it has finished syncing or says connected!).
Finally......double click the executable file, which should be:
RUU_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe
Hopefully it will now install the ROM without hiccups (about 10 minutes).
Hope this helps. let us know how you get on.
Click to expand...
Click to collapse
Click to expand...
Click to collapse

Re: Qtek ROM version 1.6.7.1
OnImpulse said:
Will the follwoing also work with the Cingular 8125. I haven't SIM unlocked it yet. Also, is a SIM unlock the same as a CID unlock.
Click to expand...
Click to collapse
I don't know if this will work with the 8125, but If under 'Start/Settings/System/Device Information/Identity' it says 'WIZA200', i would assume so, as it was created for the HTC Wizard, but I'm not sure.
As for totalyy unlocking your phone, YES it will. CID Unlock did it for me, but I'm not the developer of this software so am not in the best position to advise if it is suitable for anything else other than a Wizard.
Hope this helps.

I get te following message when I run lokiwiz.bat
CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
Your phone is now CID unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
ECHO is off.
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Click to expand...
Click to collapse
The device does not reboot and the ROM upgrade afterwards fails. Any tips?

hav0c said:
I get te following message when I run lokiwiz.bat
CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
The system cannot find the path specified.
Your phone is now CID unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
ECHO is off.
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Click to expand...
Click to collapse
The device does not reboot and the ROM upgrade afterwards fails. Any tips?
Click to expand...
Click to collapse
First download lokiwiz v2b. Don't use previous versions or you'll not get through this!!

ROM
When I double click on the new Rom, does it erase everything on the Vario (Programs) ?! Do I first have to sync and then put the new rom on it !?
what r the main diffrences between the roms ?
I have a T-Mobile Vario with a german rom and I'm thinking about putting the RUU_Prodigy_1060701_101_11310_QTEK_WWE_Ship or the
RUU_Prodigy_1060701_101_11310_QTEK_GER_Ship
on it, which one is better and again what r the differences between those two and the original ?
or is there even a better one !?
greetz

Absolutely 100% perfect working tutorial. CID unlock worked as did the new ROM. I too changed form MDA T-mobile NL version to Qtek WWE one.
Great tips. Thank you very much, you just saved me a few 100 euro's, and I got a device which is useful and faster.

How to Downgrade Your Wizard (STEP BY STEP) Instruction

Hey Guys....
I am still working on this DIY but this is how I was able to accomplish reverting back to my OEM Cingular 8125 state.
If someone could plase let me know how to replace the very first SPLASH Screen from "HTC" to CINGULAR, I would greatly appreciate it.
By following the steps below, you will have almost everything back to its original state.
Be sure to download all the necessary ROM files: OS ROM, Radio ROM, splash.bin
Place your OS ROM and Radio ROM inside the c:\sWizard\ROM folder.
DOWNGRADE YOUR OS AND RADIO ROM
1. Download aWizard 1.3b Beta Version (Attached File or Latest Version) from the following link: http://forum.xda-developers.com/viewtopic.php?t=37386&highlight=awizard
2. Unzip the folder to your root directory (C:\aWizard or D:\aWizard). You need to avoid having spaces your directory name. This is the reason placing folder in the root.
3. Make sure you have an active connection via Active Sync.
4. Run the aWizard.cmd file from C:\aWizard
5. Run "e" command FIRST !
6. Run "u" command. Your Wizard will reboot.
7. Run "w" command to update your ROM. You will get a prompt to choose your ROM. If you did not place a valid ROM inside the ROM folder, then you wont see it from this list. Also, if you placed your aWizard in other directory with spaces (i.e C:\ MY DOCUMENT) then you wont see it either. Just let it run. It will take close to 20 minutes. At the end, it will as you to hard reset.
8. Run "r" command to update your Radio ROM. Same as Step 7.
Replacing Splash Screen (Back to Cingular)
1. Place the splash.bin file inside the c:\aWizard\lib
2. Open up CMD and navigate to c:\aWizard\lib
3. Type in the following command "pdocwrite.exe -n 1 splash.bin 0x002d0000"
pdocwrite.exe = this program is located inside the LIB folder
splash.bin is a file that I converted.
4. Once completed, please reset your Wizard and now you will have Cingular's Splash (2nd Splash)
Updating the EXT ROM
1. I did this manually by utilizing Active Sync to copy over all the Cingular ROMs to the Wizard and running it individually.
2. Reset and you will now have all the programs Wizard came with.
FAQ
Q. My Wizard is stuck on a splash screen and it wont do anything.
1. Hard reset your Wizard
2. Hold onto Camera Button while turning on the Wizard and you will get the boot screen.
3. Plug in your USB Cable
4. Run one of the known ROM files with .exe extention. When this happened to me while downgrading,
I had to reload the latest iMate ROM.
5. Start the downgrade process again by following the above instruction.

reverting back to original cingular rom
Thank you for this.
Don't you have to REINSTALL original Cingular Rom or does this do that by removing imate updated ROM?
js

Re: reverting back to original cingular rom
urologyhealth said:
Thank you for this.
Don't you have to REINSTALL original Cingular Rom or does this do that by removing imate updated ROM?
js
Click to expand...
Click to collapse
When you install Cingular ROM, it will remove/overwrite the existing iMate ROM.
Be sure to place your ROM files in the the ROM folder.

If your running the aku2 imate rom, many people will have problems running awizard or lokiwiz to unlock the CID, I had to run the tmo uk rom update (.exe one) which replaced the imate, and then restore the rom files I had backed up for cingular, although the extended rom is still locked, thats annoying.

jvanbrecht said:
If your running the aku2 imate rom, many people will have problems running awizard or lokiwiz to unlock the CID, I had to run the tmo uk rom update (.exe one) which replaced the imate, and then restore the rom files I had backed up for cingular, although the extended rom is still locked, thats annoying.
Click to expand...
Click to collapse
can you please share how you change the very first splash screen on your 8125 ? its the only thing i wasnt able to do or know how to do.
thanks

FarSeide, I'm pretty sure that even the stock 8125's from Cingular showed the HTC screen first, the cingular screen second, and finally the Windows Mobile screen. If that's the case, then your 8125 is as good as new as far as Cingular is concerned.
Also, if anyone upgraded to the AKU2 I-mate ROM, you cannot do the process you described, because (as someone else mentioned) the lokiwiz program will not work. What you need to do is FIRST install a different ROM using an exe file (a good example would be the leaked AKU2 Q-Tek ROM exe file), and only after that entire upgrade process is completed, can you now use lokiwiz to unlock the SuperCID and install the Cingular ROM.

kingbear2 said:
FarSeide, I'm pretty sure that even the stock 8125's from Cingular showed the HTC screen first, the cingular screen second, and finally the Windows Mobile screen. If that's the case, then your 8125 is as good as new as far as Cingular is concerned.
Also, if anyone upgraded to the AKU2 I-mate ROM, you cannot do the process you described, because (as someone else mentioned) the lokiwiz program will not work. What you need to do is FIRST install a different ROM using an exe file (a good example would be the leaked AKU2 Q-Tek ROM exe file), and only after that entire upgrade process is completed, can you now use lokiwiz to unlock the SuperCID and install the Cingular ROM.
Click to expand...
Click to collapse
Eli,
thank you for the info. I wanted to put this together because when I tired to do this, there were information but scattered all over all forums. just wanted to help others so that they dont go through the same thing i did.

i was following these instructions and i got a
NOTIFICATION ERROR
cannot execute repllog.exe
so what i had to do was hard reset, boot screen , re-installed imate, ...
i guess i will try it again, what do you guys think

hmmm... sorry to say but my 8125 only ever showed the cingular splash. No HTC, no WinMob. I had assumed that Cingular somehow replaced all 3 splash screen with theirs.... In fact, I never even knew there was more than one splash screen until I upgraded to the Qtek rom.

I'm in trouble
I tried to downgrade the ROM and now I'm hung in the i-Mate SPLASH SCREEN. I tried the hard reset and it hangs every time. I can't get a connection through active sync obviously so what are my options. How can I get a working device.
I'm freaking out.
Please HELP!!!!!!!!!!!!!

Re: I'm in trouble
hellomoto_25 said:
I tried to downgrade the ROM and now I'm hung in the i-Mate SPLASH SCREEN. I tried the hard reset and it hangs every time. I can't get a connection through active sync obviously so what are my options. How can I get a working device.
I'm freaking out.
Please HELP!!!!!!!!!!!!!
Click to expand...
Click to collapse
relax... i was exactly where you were...
first, hard reset your device.
Hold the Com Manager, Voice Command and press the soft reset with your stylus.
before you turn the device back on, hold the camera button then turn on the power. you will receive the boot screen. Plug in your USB Cable and kick off the EXE file. Load one of the known ROMS like the iMate ROM.
reload and try again. I am willing to bet that you disconnected the USB Cable while updating to Cingular ROM.
Good luck and dont worry.

does anyone have the exe for the original Cingular ROM ?
my colleague tried to update his 8125 with my imate rom.....and did not unlock it first.
all he has is the bootloader now, the update gives the well known Error: Invalid Vender ID
Any help is greatly appreciated
Thanks !!

Get a copy of the proper ROM on a SD card, and reload it that way.
This is the easiest way out of that box......

Thanks,
but how to get the Rom reloaded from the SD card onto the device using the bootloader ?

dirty_harry said:
Thanks,
but how to get the Rom reloaded from the SD card onto the device using the bootloader ?
Click to expand...
Click to collapse
THAT part is easy.
Note that the SD card image is NOT a file. You have to raw write it onto the card, which will destroy the filesystem - so back up the card first! psdwrite will do the job. You also need the image (PREVIOUSLY copied from a SD-made backup with "psdREAD")
To restore it, insert the card, hold the CAMERA button, and power on. The phone will tell you to press VOICE to restore the SD image (it looks to see if there's a valid one in there)
Note that with 1.x bootloaders this will happen with the BACKLIGHT OFF, and you only have 3 seconds or so to press the key - so have a flashlight handy. 2.x bootloaders turn the backlight ON.
Hit VOICE. The image will be verified (checksummed) and if it is good, it will be loaded.
That's it. Takes about 2-3 minutes. When it finishes it will tell you to press any key, and when you do you'll end up at the tricolor screen.
Power off and back on, and the phone will cold boot the new image.
This will work even if you can't run an RUU loader, so long as you can get that first prompt up. It is a VERY effective rescue method.
IMHO before you hack on the firmware in these things you should make an SD card backup just for this reason.

Which tools is best option for ROM backup to Mini SD?
Hi,
Just read your message about writing ROM to Mini SD card.
I'd like to do just that.
I want one or two ROM's for safekeeping stored somewhere instead only a backup or official copy on my pc.
As i've read restoring from SD is safer and faster..
I don't intend to use the SD card for anything more than just that.
In the Prodigy Service Manual (Prodigy Service Manual -XA(0813-2005).pdf) HTC uses mtty.exe. There are also instructions in the PDF.
Since HTC uses this, it should do exactly what i want, i guess?
Or is there a better tool?
Thanks,
Allegro.
P.S: Will a restored ROM from Mini-SD look fresh to HTC?
Or will they see it's a self restored copy instead of a official HTC restore?
Will it reset "everything"?

I was able to fully restore CIngular 8125 ROM, EXTROM, All Splash Images using the SD Restore.
100 Cingular OEM Spec has been restored...

I hv updated T Mo custom ROM..but now can't downgrade even by Awizard utils....can any one throw some light on this?

Help with serial Screen

I have a 6515a on Cingular. The device will turn on and show the Cingular logo with the numbers 1.12 at the bottom. It will then proceed to start the windows calibration screen. You can go throught the calibration followed by the load of the cingular software screen at the begining. When the device resets to start after the load, it goes straight to the HP logo screen where it says "Serial" at the top, followed by "v. 021" at the bottom of the screen.
I have read every thread in this section and no one has had a problem anywhere near mine. I have tried the button press of Power+CAM+joystick+reset, but it still returns to the "serial" screen.
I was wondering if I could just re-flash it some how, and then be albe to use it?
The first three of my IMEI is 357 if that helps any.
Thanks,
Liquidd
Please help

you will need to freflash your device with the lastest rom of cingular (search it in hp.com)
enjoy it

londere said:
you will need to freflash your device with the lastest rom of cingular (search it in hp.com)
enjoy it
Click to expand...
Click to collapse
I have tried to using the HP Ruu utility, but it will only work after trying to verify that the device is what it needs to be. Since it can not check it to verify it, the device fails and will not proceede. Will or should any of the flash utilities here work with the HP .nbf flash files?

search in the web a applet called beetle_ ruu and also get the lastest rom an correcvt of your device or update via mtty

londere said:
search in the web a applet called beetle_ ruu and also get the lastest rom an correcvt of your device or update via mtty
Click to expand...
Click to collapse
The only thing that I can find on the beetles is http://wiki.xda-developers.com/index.php?pagename=HTC_Beetles I have not been able to find the beetle_ruu. Can you possibley point me in the correct direction? or maybe tell me where I can Download it from?
I appreciate all of your help.
Liquidd

well try read the post 10 of this http://forum.xda-developers.com/showthread.php?t=284719
and download the package6515rom
there is the file on the hp bluetooth exe unzip and extract the beetle_ruu

[Q] unlock rom image for hp 6515

Hi
I have a cingular hp 6515a . I cannot unlock it.I need an unlock hp 6515 rom image.please help me.

Unlock hp 6515
Thats very easy.
1: Download the (upgrade and unlocked) ROM from HP's website
2: HardReset your phone, but leave it in the first welcome screen (before the align screen and so)
3: Connect the phone to your PC, and wait for the connection to be established.
4: Run the downloaded Upgrade package (from HP), the phone will show a bootloader-screen.
Sometimes, the phone will not accept the upgrade program.
In that case do the following, but nothing else!
1: Disconnect the phone and soft reset it (it will come back into the bootloader)
2: Close the HP-upgrade program with taskmanager on your PC
3: Reconnect the phone to the PC
4: Rerun the HP ROM upgrade program.
Now your phone will show its upgrade status. It will take a while (about 20 minutes or so), but afterwards you will have a clean unlocked 6515.
I did this with several locked phones (especially Vodafone) from international sources.
Above will work fine, on every PC with Active-Sync (in my case 4.5) installed.
I assume, you will have a backup, made by the SIP-backup program on one of your memory cards. You can restore it after you've upgraded your phone

SKU error,, did not work

Unlock HP 6515
Did you use the rom you download here: HP 6515 ROM upgrades ?
I did it again today, but with a soft reset of the 6515 and shutting down the upgrade program with taskmanager. Do NOT Hard-reset the device or reboot your computer! Before restarting the upgrade, the computer has to reconnect to the 6515 although it is in the bootloader mode.

My hw6515 is dead after the upgrade to 1.21
Hi guys,
I tried my cingular hw6515a to update the ROM to 1.21 unlocked ROM, it went successful but when booting it shows the initial setup and it hung on the second step "Pop-up Menus" and it doesnt show up any next button. What should i do now, please help me..
Thanks a lot in advance.

Has anyone managed to get this to work on a 6515 "A"? When I tried it I got an error message that said something like "Incorrect device SKU". I then decided to try upgrading to 1.20 which went smoothly. However, I still get the same SKU error message when trying to upgrade to 1.21. Is there a way to force it into bootloader mode? Anyone know some trick that I'm missing?

ROM Update 6515
SKU-error means wrong language.....

deivasankar said:
Hi guys,
I tried my cingular hw6515a to update the ROM to 1.21 unlocked ROM, it went successful but when booting it shows the initial setup and it hung on the second step "Pop-up Menus" and it doesnt show up any next button. What should i do now, please help me..
Thanks a lot in advance.
Click to expand...
Click to collapse
Retry the update, or downgrade to 1.20

I Think Not..............
Accordint to i know sim/Net locks r stored on different partison or ROM image of WM so when u upgrade it it dont removes sim/net locks..............

Hi there,
I've tried upgrade from 1.04 to 1.21WWE, but the upgrade process died on 12.5%.
I use the original rom upgrade from HP with ActiveSync 4.5 on XP.
I've tried many times to restart the upgrade process, but it fails on .1%.
Cann someone tell me where I can find the original 6515.bin. I've try to gogole it but with no success.
Thanks in advance.

cellsolution said:
Accordint to i know sim/Net locks r stored on different partison or ROM image of WM so when u upgrade it it dont removes sim/net locks..............
Click to expand...
Click to collapse
I've done it several times. The HP Roms contains also the RadioROM.
If you just think it cannot done... Why don't you give it try...

Arruor said:
Hi there,
I've tried upgrade from 1.04 to 1.21WWE, but the upgrade process died on 12.5%.
I use the original rom upgrade from HP with ActiveSync 4.5 on XP.
I've tried many times to restart the upgrade process, but it fails on .1%.
Cann someone tell me where I can find the original 6515.bin. I've try to gogole it but with no success.
Thanks in advance.
Click to expand...
Click to collapse
What language do you use?
For WWE you wil find v1.21, v1.20, v1.12 and v1.00 here.

SKU ERROR help pls

cellsolution said:
Accordint to i know sim/Net locks r stored on different partison or ROM image of WM so when u upgrade it it dont removes sim/net locks..............
Click to expand...
Click to collapse
So how can we solve this problem?

Unlock and language change- this is how it worked for me!
This method worked for for an iPaq hw6515 after many long nights, but may be good as well for others:
Do this only from an Windows XP OS.
Make sure you have up to date ActiveSync from Microsoft!
To Unlock,
Just reflash your iPaq with the THE SAME language from HP official support site: h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=501212&lang=en&cc=us &prodTypeId=215348&prodSeriesId=501209&taskId=1 35
Connect your PDA to the computer and check it is in state connected in ActiveSync.
Download the current language ROM from the provided link, unpack, , and follow the instructions.
This official tool will do everything for you!
When it completes (~30 minutes), your phone will be unlocked.
After that if you need to change the language, follow this instructions:
How to change the language in your iPaq:
Here is the detailed process completed, borrowed from Barr :
1. Download and extract BOTH current and desired ROM language pack from HP site to the computer. Unpack them to different folders.
2. Establishing connection with the computer, copy EnterBL.exe (from desired language ROM folder) to the mydocument folder of the PDA.
3. Run the EnterBL.exe from the PDA. (Now your PDA will go to Bootloader mode).
4. (before executing step 4, prepare for step 5 since step 5 will have to be executed right after step4). From your PC, start updating the current ROM by lunching hpRUU.exe of the current installed language of your PDA.
5. Right after step4, when it will start updating, copy all the data (*.nbf) files of desired/intendedlanguage ROM pack to the current ROM pack. (the Rradio.nbf may be skipped if the device is already unlocked).
6. At the end of copying, it might show an error message, press OK to ignore.
7. The phone will restart!

Arruor said:
Hi there,
I've tried upgrade from 1.04 to 1.21WWE, but the upgrade process died on 12.5%.
I use the original rom upgrade from HP with ActiveSync 4.5 on XP.
I've tried many times to restart the upgrade process, but it fails on .1%.
Cann someone tell me where I can find the original 6515.bin. I've try to gogole it but with no success.
Thanks in advance.
Click to expand...
Click to collapse
Same here i reflash again last night but upgrade process fails on .02%