Hi, I cleaned the screen of my HTC Diamond with a bit of alcohol and a pice of tissue and it seems that the alcohol got inside of the Power button. Now, every time I try to turn the screen on by touching the power button, it turns the screen on but it dispays a message that says: "Warning: Power will be turned off and you may lose data if you have not saved them. Do you want to continue?"
If I click YES, it reboots the phone, If I click NO, then its ok. That is fine, but the problem is when I want to turn the phone off. It's impossible. It will keep trying to reboot.
Does anybody know what can I do? I am really worried.
One solution could be to make some other button from the phone to act as the power button (like the Home button that is rarely used). How can I do that?
Please help!!!!
Thank you
Hi,
I have the same problem.
Did you already find an answer ?
No, I didnt find the solution. I tried to fix the hardware but didnt succeed. So, I created a dummy file to emulate the poweroffwarning.exe that pops up when you long press the power button.
Solution
Hello, I have one AT&T TITL 8925 that upgraded to Windows Mobile 6.5
After the new software was loaded I saw same behavior on my phone.
When the phone is ON and I pressed the power button sometimes it do not respond, and others I received the warning message "power will be turned off and you may lose data if you have not saved them..." My first tought was that it is because the processor is slow to this new software release, or maybe my phone is damaged. I was working perfectly with previous (light version) release so my final guess is that this sw requires more uses of the processos.
Anyways what I have been doing is before turing it off I press the red button or hang up button, and after this if I press the power button it works fine (No more warnings). I have some theories but I will keep doing the same
Hope this partial solution helps you as it does for me.
Regards
Jerry
this is not working for me :| the problem is i can't use my power button not even to open my display when it goes to sleep :|:| i don't know what to do guys please help me
You can use the Stylus to awake the phone, instead of using the power button. You can also use TouchLockPro, to suspend the device, so you do not need the power button for that too.
Also you can set the phone to awake on pressing any key (Windows Mobile Setting), but be sure to have a good locking tool, which makes sure you do not have bogus calls and it goes to sleep again fast enough, otherwise it will drain battery.
I have the same problem.
Anyone solved this one?
I have the same issue and this is not a hardware problem. Strange since even updates/changes of the rom do not correct the issue. Did anybody find a solution for this...?
Well.. ive had this problem just ones.. I was walking downtown with my diamond in the frontpocket of my jeans (face down), after about 3min. of walk, it started to rain (big drops), and my clothes got completely wet, i turned around emidietly, to walk back to home. When i got home after 3 more min. i layed the phone on the table, and then i could hear there were somethibg wrong.. The "turn off" sound came, and the notification kept on coming up, even though i pressed No, as if i were just holding the power button down.. Then i began to press the power button continuesly for about a 100 times, and to my surprise then it stopped and have functioned perfectly for about 2 month now.. Something tells me theres some serius promlem with the smallest kind of moisture near the power button on this phone..
Yes this is hardware related.
If you take a look at the inside of the powerbutton, there are 2 points making contact when you press the button.
If you press it, the software will recognize this and the screen will turn off.
If you press it long enough you'll get the "Do you want to turn off your device" message.
But, if water gets underneath the button, the 2 points may be making contact, because water/alcohol conducts.
In this way you'll get that message.
The button is very weak. Due to this, it may not properly work if you have used it for a long time.
I think that could also be a reason why you constantly get that message.
[ElCondor] said:
Yes this is hardware related.
If you take a look at the inside of the powerbutton, there are 2 points making contact when you press the button.
If you press it, the software will recognize this and the screen will turn off.
If you press it long enough you'll get the "Do you want to turn off your device" message.
But, if water gets underneath the button, the 2 points may be making contact, because water/alcohol conducts.
In this way you'll get that message.
The button is very weak. Due to this, it may not properly work if you have used it for a long time.
I think that could also be a reason why you constantly get that message.
Click to expand...
Click to collapse
Hi! on one of my diamond, the power button off from the board. So the black little board with the button itself is not part of the complete circuit anymore... if someone know the hw testpoint for that it would great please.... i see a few TP around, but if i just start sorting them i just going to kill it...I use to flash phones with TP so is not new for me , but i find nothing for diamond.
I have a similar issue. Mine seems like it is almost stuck on, so it wakes its self up all the time, meaning a full charge lasts an hour or two. Then when it runs out of battery it tries to switch itself back on, so goes through a continuous cycle of vibrating and beeping until the battery is removed. The gf finds it very annoying at 3am lol.
Don't recall mine getting wet, but it's possible it could have got damp at some point, but it's been doing this now for about 3 weeks.
Tried a hard reset with no luck.
[ElCondor] said:
Yes this is hardware related.
If you take a look at the inside of the powerbutton, there are 2 points making contact when you press the button.
If you press it, the software will recognize this and the screen will turn off.
If you press it long enough you'll get the "Do you want to turn off your device" message.
But, if water gets underneath the button, the 2 points may be making contact, because water/alcohol conducts.
In this way you'll get that message.
The button is very weak. Due to this, it may not properly work if you have used it for a long time.
I think that could also be a reason why you constantly get that message.
Click to expand...
Click to collapse
I can see that how to remove the power button from the video showing how to replace the screen. Any idea if once removed the button can be fixed, if not can you get replacements?
2004mark said:
I can see that how to remove the power button from the video showing how to replace the screen. Any idea if once removed the button can be fixed, if not can you get replacements?
Click to expand...
Click to collapse
I think I should send it to HTC, and ask them to do it. Or go to a repair centre. But I should not try it myself, because it can be dangerous for the diamond.
Also try searching on ebay, there might be the parts you could use.
Good luck!
is there a way to remap the power button?
my diamond face same problem since this afternoon, arrrrgghhhh!!!
- blocking hwbutton1, hwbutton2, hwbutton3, hwbutton4, hwbutton5, hwbutton6, hwbutton7 >>>> NO LUCK
- hard reset >>> NO LUCK
guys, any of you solved the problem yet
youtube.com/watch?v=Q4SEQ6AUFOI
My Sony X1 have some strange problems with the power button. When it goes into sleep mode, I can not wake it up with the power button, all I can do is to soft reset. Sometimes it does not go into sleep mode either , it just "wake up" all the time. I don't know what's wrong with it, tried Hard reset but no use .
ANyone had this problems before?
@
The only way to solve this is to leave the phone near your laptop heat vent ( fan) . hot air from it might help you to get the power button up and running. But if that to doesn't work then i'm afraid thats bad.
Current sol :
1. download SU2U ( search threads )
2. go to the settings and make the " lock when stylus inserted" option ON
3. Change the screen turn off time to 5 secs..
So , to unlock , remove stylus , to lock -> insert it back ( its turns off the back light within 5 sec )
Less annoying
elektros said:
youtube.com/watch?v=Q4SEQ6AUFOI
Click to expand...
Click to collapse
thanks for this link, i accidentally tear off my power button flex. now i could turn it on again. Thanks elektros
sorry if there is an answer somewhere, couldn't find it.
my power button on the N1 broke and yestarday I had to turn it off. the battery trick (plug in the phone, take out and re-insert the battery a couple off times) worked once before but now the phone simply stays off.
warrenty is not an option anymore for me.
Is there any another way to turn the phone on without using the power button?
thanks in advance
Edit: just in case, my N1 is an SLCD model and its running 2.3.4.
Wow, I'm having the same problem and was about to make a thread like this.
Running CM7, the phone crashed on me last night and I had to turn it off. I tried the battery trick, but it's never worked for me. The few times I've had to turn the phone off, I was lucky and the power button worked after mashing it for a couple of minutes, but now it's completely dead.
I'm under warranty, but right now I'm without a phone and and need it back up ASAP..
(Mine is also the SLCD model, if it makes a difference.)
Edit: Managed to mash the button to life once again; My phone is back. I think I need to give HTC a call.
Try pulling the SIM and SD, as well as the battery, and re-inserting them all...
The other option - I read a post by a guy whose power button was stuck in the closed position, and he had to open the phone and separate the contacts to get the phone to start...
Also if you are anything into some DIY repair work, there is always a spare part for this http://shop.ebay.com/i.html?_kw=nexus one power flex
With the right tools, it shouldn't be to much of a problem replacing this part.
I have searched this exact title and came up with 10 pages and I never saw anyone else with this problem. Surely I cannot be the only one.
After the Gingerbread upgrade I was getting the tethering message/force close, during that time my phone started to randomly shut off ( settle down Beavis, this isn't the same question thats been asked a thousand times ) and reboot. I lived with the tethering message problem for as long as I could but my phone became more ignorant day by day. I finally found a fix for the tethering issue and haven't had a return problem with that but now my phone either stays in standby mode ( dark screen ) and refuses to respond to the hard button to wake it up OR once on it refuses to go into standby mode and stays on until I pop the battery or I go into settings and time the screen out in 15 seconds ( often times this doesn't shut it down either ). Sometimes I can get it to come on by multiple pressing the power button ( this can't be healthy ) and the lock screen will flash momentarily just long enough for me to unlock the screen. Other times it will go to the lock screen while I'm in the middle of something.
Every day at some point while it's on and I'm using it, the power button option screen pops up ( silent mode, flight mode, power off ). When I'm done with a call I try to go into standby and it just sets there...ON.
The thought has crossed my mind that the button doesn't work or has a short but I really think it's something else ( I hope ). Can somebody help me? I am not very techie although I have updated the phone three times myself. It is unrooted and 2.3.5
Thank you in advance
I would go with the power button. It's a known issue on captivate.
mrhaley30705 said:
I would go with the power button. It's a known issue on captivate.
Click to expand...
Click to collapse
I stopped by the AT&T store the other day to check on insurance (ends up I didn't have it) and told them about my button not working properly and how the Captivate was notorious for this problem and they all said "We've never heard that". So the gadget gal is in there so she offers to take it apart and check it. She claims there isn't anything wrong with it and that it has the same amount of spring as the volume buttons. She then noticed that when she put the battery back in the phone came on automatically, I said it's not supposed to do that and she agreed but fortunate for me since I cannot turn it on. She then says I'm eligible for an upgrade and try's to sell me a new phone. I don't want a new contract.
So should I try and buy a new button and change it or could it be something else? Thank you in advance.
Are you using a case for your phone by any chance? If yes, is it too tight? Maybe the power button gets stuck because of that sometimes? Just a long shot! You stated that power menu pops up once in awhile when you're using it, is it possible that the way you grip the phone causes that? (Just trying to help and not trying to offend you btw.)
You might want to try flashing UCKK4 with bootloader(use it from the one click master collection of stock rom's) just to make sure that there is no issue with the firmware. It is not likely to fix your problem but it's good to have a clean start. At least that's what I would do to begin with.
Since you're willing to change the power button, why not do an experiment? Remove the power button and see if there is any change? If it works fine then it's the power button that's faulty else it's a hardware problem.
Greetings.
Today the power switch from my Note stopped working.
I found a website that will replace it for an original Samsung one, but I would like to ask if anyone has a better alternative here on the US.
This is the one I got:
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-note-power-button-repair/
Also, it is weird that now that the power button doesn't work at all, I have to take out the battery to "turn off" the phone. But when I put the battery back on, the phone turns itself on. Is that normal behavior?
Thank you in advance.
if the phone is working as usual, then instead of removing the battery to switch the phone off, use any widget from the playstore to power off the phone. this way it will power off fine. may be its because the power button is messed up.
After 14 days of having the power switch in a nonworking state, today I woke up, and lo and behold, the damn switch started the work again.
Now I can turn off the phone normally, everything is normal now.
I didn't do anything special, nothing at all.
Before, I couldn't turn off the phone even with apps like QuickOff, thats allows the phone to reboot, turn off and etc, so I had to take the battery out every time.
I have no explanation.
You got lucky there :thumbup:
Sent from my GT-N7000 using Tapatalk 2
So, I think it is just because the power button gets sticky. I was having a similar problem, except that it was working intermittently; sometimes it would turn the phone off, sometimes it would bring up the shutdown screen; and sometimes it would work like it was supposed to. Probably yours started working when whatever was making it stick got dislodged. What I did was just press the button REAALLLY hard for a while while the battery was out. It's been about 24 hours and I haven't had any problems yet, fingers crossed. Another guy in a different thread just wiggled it around. Probably if you take the whole board off you could remove the power button and reinstall it or something, though it seems no one has had to go that far yet. Anyway, if anyone else runs into this problem, just mess around with the button until it starts working again. Though, as always, if you break it, its not my fault.
Hello guys,
so I woke up this morning and found my phone lying on the floor still connected to the charger. When I tried to unlock the screen everything was phone, but when I tried to relock the screen it kept popping up the power menu. Also I noticed that the powerbutton had moved a bit more to the inside of the phone. Sometimes it turns off the screen but immediately after turns it on again. I can turn the phone off but it will instantly reboot.
Any solution? It's kinda a pain in the *** that I can't switch off the phone...
Thanks in advance
fix
The same thing happened to me last week i was very pissed of. Then i tryed the safetypin and itr worked. So what you do is remove the button but making the safety pin go in the small gaps of the powerbutton and then pull it out. If it is not damaged to much just put according to your need so all the functions work. Another fix is get a new power button and put it in the power button hole it should work now. If this helped please hit the thanks button