Hi, I cleaned the screen of my HTC Diamond with a bit of alcohol and a pice of tissue and it seems that the alcohol got inside of the Power button. Now, every time I try to turn the screen on by touching the power button, it turns the screen on but it dispays a message that says: "Warning: Power will be turned off and you may lose data if you have not saved them. Do you want to continue?"
If I click YES, it reboots the phone, If I click NO, then its ok. That is fine, but the problem is when I want to turn the phone off. It's impossible. It will keep trying to reboot.
Does anybody know what can I do? I am really worried.
One solution could be to make some other button from the phone to act as the power button (like the Home button that is rarely used). How can I do that?
Please help!!!!
Thank you
Hi,
I have the same problem.
Did you already find an answer ?
No, I didnt find the solution. I tried to fix the hardware but didnt succeed. So, I created a dummy file to emulate the poweroffwarning.exe that pops up when you long press the power button.
Solution
Hello, I have one AT&T TITL 8925 that upgraded to Windows Mobile 6.5
After the new software was loaded I saw same behavior on my phone.
When the phone is ON and I pressed the power button sometimes it do not respond, and others I received the warning message "power will be turned off and you may lose data if you have not saved them..." My first tought was that it is because the processor is slow to this new software release, or maybe my phone is damaged. I was working perfectly with previous (light version) release so my final guess is that this sw requires more uses of the processos.
Anyways what I have been doing is before turing it off I press the red button or hang up button, and after this if I press the power button it works fine (No more warnings). I have some theories but I will keep doing the same
Hope this partial solution helps you as it does for me.
Regards
Jerry
this is not working for me :| the problem is i can't use my power button not even to open my display when it goes to sleep :|:| i don't know what to do guys please help me
You can use the Stylus to awake the phone, instead of using the power button. You can also use TouchLockPro, to suspend the device, so you do not need the power button for that too.
Also you can set the phone to awake on pressing any key (Windows Mobile Setting), but be sure to have a good locking tool, which makes sure you do not have bogus calls and it goes to sleep again fast enough, otherwise it will drain battery.
I have the same problem.
Anyone solved this one?
I have the same issue and this is not a hardware problem. Strange since even updates/changes of the rom do not correct the issue. Did anybody find a solution for this...?
Well.. ive had this problem just ones.. I was walking downtown with my diamond in the frontpocket of my jeans (face down), after about 3min. of walk, it started to rain (big drops), and my clothes got completely wet, i turned around emidietly, to walk back to home. When i got home after 3 more min. i layed the phone on the table, and then i could hear there were somethibg wrong.. The "turn off" sound came, and the notification kept on coming up, even though i pressed No, as if i were just holding the power button down.. Then i began to press the power button continuesly for about a 100 times, and to my surprise then it stopped and have functioned perfectly for about 2 month now.. Something tells me theres some serius promlem with the smallest kind of moisture near the power button on this phone..
Yes this is hardware related.
If you take a look at the inside of the powerbutton, there are 2 points making contact when you press the button.
If you press it, the software will recognize this and the screen will turn off.
If you press it long enough you'll get the "Do you want to turn off your device" message.
But, if water gets underneath the button, the 2 points may be making contact, because water/alcohol conducts.
In this way you'll get that message.
The button is very weak. Due to this, it may not properly work if you have used it for a long time.
I think that could also be a reason why you constantly get that message.
[ElCondor] said:
Yes this is hardware related.
If you take a look at the inside of the powerbutton, there are 2 points making contact when you press the button.
If you press it, the software will recognize this and the screen will turn off.
If you press it long enough you'll get the "Do you want to turn off your device" message.
But, if water gets underneath the button, the 2 points may be making contact, because water/alcohol conducts.
In this way you'll get that message.
The button is very weak. Due to this, it may not properly work if you have used it for a long time.
I think that could also be a reason why you constantly get that message.
Click to expand...
Click to collapse
Hi! on one of my diamond, the power button off from the board. So the black little board with the button itself is not part of the complete circuit anymore... if someone know the hw testpoint for that it would great please.... i see a few TP around, but if i just start sorting them i just going to kill it...I use to flash phones with TP so is not new for me , but i find nothing for diamond.
I have a similar issue. Mine seems like it is almost stuck on, so it wakes its self up all the time, meaning a full charge lasts an hour or two. Then when it runs out of battery it tries to switch itself back on, so goes through a continuous cycle of vibrating and beeping until the battery is removed. The gf finds it very annoying at 3am lol.
Don't recall mine getting wet, but it's possible it could have got damp at some point, but it's been doing this now for about 3 weeks.
Tried a hard reset with no luck.
[ElCondor] said:
Yes this is hardware related.
If you take a look at the inside of the powerbutton, there are 2 points making contact when you press the button.
If you press it, the software will recognize this and the screen will turn off.
If you press it long enough you'll get the "Do you want to turn off your device" message.
But, if water gets underneath the button, the 2 points may be making contact, because water/alcohol conducts.
In this way you'll get that message.
The button is very weak. Due to this, it may not properly work if you have used it for a long time.
I think that could also be a reason why you constantly get that message.
Click to expand...
Click to collapse
I can see that how to remove the power button from the video showing how to replace the screen. Any idea if once removed the button can be fixed, if not can you get replacements?
2004mark said:
I can see that how to remove the power button from the video showing how to replace the screen. Any idea if once removed the button can be fixed, if not can you get replacements?
Click to expand...
Click to collapse
I think I should send it to HTC, and ask them to do it. Or go to a repair centre. But I should not try it myself, because it can be dangerous for the diamond.
Also try searching on ebay, there might be the parts you could use.
Good luck!
is there a way to remap the power button?
my diamond face same problem since this afternoon, arrrrgghhhh!!!
- blocking hwbutton1, hwbutton2, hwbutton3, hwbutton4, hwbutton5, hwbutton6, hwbutton7 >>>> NO LUCK
- hard reset >>> NO LUCK
guys, any of you solved the problem yet
youtube.com/watch?v=Q4SEQ6AUFOI
My Sony X1 have some strange problems with the power button. When it goes into sleep mode, I can not wake it up with the power button, all I can do is to soft reset. Sometimes it does not go into sleep mode either , it just "wake up" all the time. I don't know what's wrong with it, tried Hard reset but no use .
ANyone had this problems before?
@
The only way to solve this is to leave the phone near your laptop heat vent ( fan) . hot air from it might help you to get the power button up and running. But if that to doesn't work then i'm afraid thats bad.
Current sol :
1. download SU2U ( search threads )
2. go to the settings and make the " lock when stylus inserted" option ON
3. Change the screen turn off time to 5 secs..
So , to unlock , remove stylus , to lock -> insert it back ( its turns off the back light within 5 sec )
Less annoying
elektros said:
youtube.com/watch?v=Q4SEQ6AUFOI
Click to expand...
Click to collapse
thanks for this link, i accidentally tear off my power button flex. now i could turn it on again. Thanks elektros
Okay i was out in the rain the other day and my Diamond was in my pocket.
Ever since my power button has stopped working. I guess my phone got wet somehow...
Now i always get the " Power will be turned off and you may lose data if you have not saved them. Do you want to continue?"
It just keeps popping up every minute or so it and wont bloody go away.
My power button wont turn the phone off/on or even lock my phone. So I'm guessing it's dead.
I'm guessing there is a part in the phone I can replace to fix this. Can one of you gurus point me in the right direction on which part I would need to buy?
I'm from the UK..
Thank you in advance.
Little bit of an update. My battery died last night. So I put it on charge when I woke up.
I obviously had to use the power button to turn it on. And for some strange reason it worked!
But It wont allow me to lock my phone when it's turned on. And i also get the same issue with the message popping up as I posted above. Could anyone help
anybody know what part i would need to fix this?
sorry if there is an answer somewhere, couldn't find it.
my power button on the N1 broke and yestarday I had to turn it off. the battery trick (plug in the phone, take out and re-insert the battery a couple off times) worked once before but now the phone simply stays off.
warrenty is not an option anymore for me.
Is there any another way to turn the phone on without using the power button?
thanks in advance
Edit: just in case, my N1 is an SLCD model and its running 2.3.4.
Wow, I'm having the same problem and was about to make a thread like this.
Running CM7, the phone crashed on me last night and I had to turn it off. I tried the battery trick, but it's never worked for me. The few times I've had to turn the phone off, I was lucky and the power button worked after mashing it for a couple of minutes, but now it's completely dead.
I'm under warranty, but right now I'm without a phone and and need it back up ASAP..
(Mine is also the SLCD model, if it makes a difference.)
Edit: Managed to mash the button to life once again; My phone is back. I think I need to give HTC a call.
Try pulling the SIM and SD, as well as the battery, and re-inserting them all...
The other option - I read a post by a guy whose power button was stuck in the closed position, and he had to open the phone and separate the contacts to get the phone to start...
Also if you are anything into some DIY repair work, there is always a spare part for this http://shop.ebay.com/i.html?_kw=nexus one power flex
With the right tools, it shouldn't be to much of a problem replacing this part.
Help. I was in a Facebook message conversation and I tried to send a picture from my phone to my friend. When I did so the screen turned black (notification bar was still visible) and nothing would respond, be it the power button, home button, whatever, nothing worked. So I held the power button until it turned off and and then tried to turn it on. It seemed to boot but after the splash screen I just got a black screen. I pressed the power button, the home and back keys flashed for a long while and then it turned off and now it won't turn on. If I plug it into the charger it also won't react, no charge light, nothing. It doesn't even get warm.
Right now I DO NOT have the money to get a new phone so if anyone can help me I'd greatly appreciate it.:crying:
Oh, forgot to mention that everything is stock, no roots, no mods, no nothing.
solsearch said:
Help. I was in a Facebook message conversation and I tried to send a picture from my phone to my friend. When I did so the screen turned black (notification bar was still visible) and nothing would respond, be it the power button, home button, whatever, nothing worked. So I held the power button until it turned off and and then tried to turn it on. It seemed to boot but after the splash screen I just got a black screen. I pressed the power button, the home and back keys flashed for a long while and then it turned off and now it won't turn on. If I plug it into the charger it also won't react, no charge light, nothing. It doesn't even get warm.
Right now I DO NOT have the money to get a new phone so if anyone can help me I'd greatly appreciate it.:crying:
Oh, forgot to mention that everything is stock, no roots, no mods, no nothing.
Click to expand...
Click to collapse
What happens when you press the power button + the volume down button? That should normally bring you into the bootloader. From there you could do a factory reset.
solsearch said:
Help. I was in a Facebook message conversation and I tried to send a picture from my phone to my friend. When I did so the screen turned black (notification bar was still visible) and nothing would respond, be it the power button, home button, whatever, nothing worked. So I held the power button until it turned off and and then tried to turn it on. It seemed to boot but after the splash screen I just got a black screen. I pressed the power button, the home and back keys flashed for a long while and then it turned off and now it won't turn on. If I plug it into the charger it also won't react, no charge light, nothing. It doesn't even get warm.
Right now I DO NOT have the money to get a new phone so if anyone can help me I'd greatly appreciate it.:crying:
Oh, forgot to mention that everything is stock, no roots, no mods, no nothing.
Click to expand...
Click to collapse
Plug you phone into the computer, have a look in device manager does it say QHSUSB_DLOAD ?
if so you have a hard brick, theres 1 of 2 things you can do, you can try this and risk voiding your warranty (if its still under warranty......http://forum.xda-developers.com/showthread.php?t=2770684
Or you can send it back to where you brought it and have it repaired / replaced.
Well, there's no warranty and sending it in would cost me around a hundred dollars in shipping plus the return shipping plus any repairs so that's not really a viable solution. The power button and volume down didn't work. I had actually tried it. Didn't get a chance to try the QHSUSB_DLOAD thing but I doubt it as I had gone through all the updates in sequence and the last one was whenever the Sense 6 update came out so it had been fine for weeks with no hitch.
Yesterday I went to the places that fix phones to see if any of them could help and then suddenly at one of them (the first one wanted me to leave it with them and I didn't feel they were trustworthy enough, the second was about to try to open it without even knowing how so I stopped him before he could break it, the third one wouldn't even look at it and suggested I send it in to the htc repair center which doesn't exist in this country). At the 4th place it miraculously started working but I don't know how long it will keep on that way.
Thanks for the help and the suggestions.
Hello,
I have a rooted and TWRP installed but otherwise stock 5.something T710 that I had worked on months ago. It's been great and my daughter had been using it to watch videos a couple days ago. I took the tablet from her at the end of our road trip and noticed it had about 63% battery left. I left it in the truck while we went to the movies(about 40 degrees f outsides) and then drove home without ever touching it until we got home. I went to use it when we got home and it would not turn on. I plugged it in to let it charge thinking it died for some reason, using the stock charger, though battery icon never appeared. The next morning I went to check it and it still would not turn on.
When I press the power button or plug in or unplug the charger the Recent and Back soft key lights will turn on for a second, then turn back off again.
I've tried:
Holding the power button down alone for over 3 minutes.
Held the power and volume up button for over a minute
Power and volume down for over a minute.
Home, volume down and power for over a minute
Home, volume up and power for over a minute.
I can connect it to my computer and it recognizes that my Tab S2 is connected but no files show as the default for the device was just charging mode and not the file modes.
Odin3 v3.10.7 recognizes it as connected. But fails to send the TWRP file again.
Any help?
Since the soft keys light up and the computer recognizes the device, it sounds like maybe the tab is still working but with no display? By any chance did you have adb working? I f so you could try rebooting, or booting into recovery to see if you see anything on the screen. It's possible that when you held the button combos, that it did boot into download and recovery but you couldn't see anything? In which case it could be a hardware problem. Hopefully it will fix itself! Sorry I can't be of more help..
Well adb shows the device as unauthorized. Reboot command says the same thing.
The home key is unresponsive to my finger print unlocks and no sound plays when I try to adjust the volume, like the ding sound it makes to hear if this is the volume level I want. There are never any of the capacitive touch vibrations or whatever its called to feel when you press a button on the screen.
I was wondering if it had something to do with hardware it's just strange that it would stop working from just being in my truck. From my knowledge it was never dropped or bumped heavily or anything, at least recently.
I guess it is possible something just burned up inside, that would be inconvenient, I've got to look up if its still in warranty. I love the size and performance of this thing.
Thanks for replying, hopefully more to come.
Still can't get it to work, same issues as above. I let the battery fully die which took about 2+weeks from the initial post. Which is to say that eventually the back and recent buttons stopped lighting up. I recharged it and after holding the power button for a few seconds the same condition repeated itself. If I touch the power button or home button the back and recent button back lights turn on for a moment and turn off again. There is no other indication of life. I would assume if it was just a dead screen then I should feel it try to turn on.
If I had to replace parts which ones should I look at first? Probably just the main board?
Buy a new one. Send yours in as defect. Done.
erase111
I see that is an old thread, but I having the same issue to a certain degree. The screen goes dark, but I can see the back light. If I play around enough times, (pressing the back and process button, before pressing the sensor button... Sometime, pressing the volume buttons and back button before pressing the sensor button), everything goes back to normal. Of course, it some random time, even when I am reading a web page or some other activity, it will go back to black.
So has anyone figured out what this issue actually might be? I thought maybe it was an issue with the ROM I was using, so I just moved over to LineageOS 16, but the problem still continues!