Related
I did the search, but not finding anything...Thanks for the help
Not sure what you want... but you can go to Start...Setings....System and choose CLEAR STORAGE and that will give you a hard reset as far as whiping data.
austinsnyc said:
-Enter Bootloader mode: Hold Camera + Power buttons together and reset with stylus(thanks pof)
-HardReset: Hold Both soft keys in while pushing in Reset button :When prompted push Green Talk Button to clear data.
Click to expand...
Click to collapse
This is the information I found... bu t I HAVE NOT been able to get my Tilt to Hard Reset from pushing any combination of buttons...
But this does work...
grizzley said:
you can go to Start...Setings....System and choose CLEAR STORAGE and that will give you a hard reset as far as whiping data.
Click to expand...
Click to collapse
Ron
I know this already. I am looking for combination of bottons + reset. As press softkeys + reset for 8525...etc
grizzley said:
Not sure what you want... but you can go to Start...Setings....System and choose CLEAR STORAGE and that will give you a hard reset as far as whiping data.
Click to expand...
Click to collapse
Don't forget about your good friend, WIKI.
I hard reset a TILT that was locked up after installing Blackberry connect to SD card (known issue). Hold down the two soft keys, then use the stylus to press the reset button for a few seconds, then release while still holding in the soft reset buttons. The warning message comes on, and as said earlier, use the green send key to initiate the data wipe.
Jim_R said:
I hard reset a TILT that was locked up after installing Blackberry connect to SD card (known issue). Hold down the two soft keys, then use the stylus to press the reset button for a few seconds, then release while still holding in the soft reset buttons. The warning message comes on, and as said earlier, use the green send key to initiate the data wipe.
Click to expand...
Click to collapse
interestingly, it does not work on my TyTN II.
However, its working on the Trinity.
It worked on my Kaiser/Tytn ll. Thanks!!!
not for me :-(
Hi,
maybe me being stupid, but this procedure does not work for me. Problem is that I installed software for the iGo bluetooth keyboard (I know ...) and ever since the Kaiser is resetting itself every 30 seconds. So what I get is only the smart mobility message, a short vibrate and then back to start. Anyone any idea how to get out of that? May I just press the wrong softkeys?
many thanks in advance
eRay42
new situation: the keys I press are definitely the right ones, I can also get into bootloader mode. I flashed the original rom (RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship) back which finished successful but the situation is the same. When I hard reset I am told it has been done, being asked to press the green button and it reverts to the old problem immediately. I should say that I have not modded my device so far, it was in original state before I installed the above mentioned software. Could it be a coincidence and it is a hardware problem?
HELP!!!
I found hard-resetting my HTC TyTN "GB" somewhat unpredictable. Holding down both soft keys while depressing the reset buttone is the correct procedure. It's either related to the HTC_END.cab. Do you have this installed?
Cheers
Strange, can't perform a hard reset either, using the softkeys of my TyTn II. No matter how long I press and hold them, no message screen, no option to hard reset.
The only way is to use Clear Storage.
pietrucci said:
Strange, can't perform a hard reset either, using the softkeys of my TyTn II. No matter how long I press and hold them, no message screen, no option to hard reset.
The only way is to use Clear Storage.
Click to expand...
Click to collapse
haha, my two fat fingers...
I finally managed to hardreset, using two pencils to push (only!) the softkeys.
pietrucci said:
haha, my two fat fingers...
I finally managed to hardreset, using two pencils to push (only!) the softkeys.
Click to expand...
Click to collapse
Pencil trick worked for me tooooo
reset
thank you..my tilt went crazy and won't bot...just keep restarting and turning off.
I had to use the pen and hold down
damn it now i have to restore everything
No still not working. These button things doesnt work. BTW does using Clear Storage give same effect, anyone?
I also haven't been able to perform hard reset on my TyTN II with the Soft Keys.. it just keeps rebooting! Can anyone help me?
Cumpz
LoL.. nothing like keep trying..
Already got it..
i read on another forum that i need to press the camera button and the power button, they are both located on the same side and press the reset button..
i done that but keep getting a red green blue and white bars, the text say sspl-1.0.0lipof and at the bottom serial..
its the same as the first thing i had to do to load wm6.1..????
thanks
icum said:
i read on another forum that i need to press the camera button and the power button, they are both located on the same side and press the reset button..
i done that but keep getting a red green blue and white bars, the text say sspl-1.0.0lipof and at the bottom serial..
its the same as the first thing i had to do to load wm6.1..????
thanks
Click to expand...
Click to collapse
It's in the Kaiser Wiki, under 'Kaiser resets'.
this is what is says...
Hard Reset **NB** This cannot be performed while the device is connected/charging!**
* Press and hold both soft keys
* Using a stylus, press and hold the soft reset button at the bottom of the phone
* Keep all three buttons pressed until the keypad lights turn off and then flash
* Release the soft reset button while still pressing the soft keys
* Let go of the two soft keys once the message "This operation will delete all your personal data, to manufacturer default" appears on screen
* Finally, press the green call button to perform the hard reset, or press other key to cancel
1. what buttons are the soft keys..
2. i pressed the power and the camera buttons then the reset set pinhole button.. release the reset pinhole button after the keypads lights go off still nothing..
I screwed up the registry (one of the folders in HKLM got renamed), the phone rebooted by itself, and now it gets stuck at the "Touch Diamond" screen with the red text at the bottom.
The hard reset doesn't seem to be working for me (holding down vdown + enter, and hitting reset). The phone just reboots and gets stuck at the screen with the red text again.
I pulled the battery out for about 10 min, put it back in, and tried holding down vdown + enter while turning on the phone. Again, it gets stuck at the screen with the red text.
I can get the 3 colour screen to come up by holding down vdown + power + reset but I don't know what to do with it after.
I have the Telus Diamond. Hope someone can help!
I have read other posts from owners of the CDMA diamond, and the hard-reset button sequence is the same. Just make sure you hold down the VOL-DOWN and ACTION BUTTON (round center button) even after letting go of the reset button. That might be your problem...letting go of the buttons too early.
TomInMB said:
I have read other posts from owners of the CDMA diamond, and the hard-reset button sequence is the same. Just make sure you hold down the VOL-DOWN and ACTION BUTTON (round center button) even after letting go of the reset button. That might be your problem...letting go of the buttons too early.
Click to expand...
Click to collapse
I hold them til I get stuck at the screen with the "Touch Diamond" and the red text at the bottom. I even tried holding it for awhile after that screen appears.
Hmmm...I guess there are others here that own the CDMA-version and can confirm the hard reset sequence is the same. But if you can get it into bootloader and then plug in the USB cable (with the "USB" indicator showing), then you should be able to flash a CDMA-specific ROM (possibly from Telus).
You can always use Clear Storage from the System tab in settings. It's quite the same, really!
tnyynt said:
You can always use Clear Storage from the System tab in settings. It's quite the same, really!
Click to expand...
Click to collapse
I can't even get windows mobile to load. The phone gets stuck where it shows "Touch Diamond" with some red text at the bottom (I think that's the version of the hardware).
nub4life said:
I can't even get windows mobile to load. The phone gets stuck where it shows "Touch Diamond" with some red text at the bottom (I think that's the version of the hardware).
Click to expand...
Click to collapse
http://www.hardreset.eu/htc_touch_diamond_hard_reset_soft_reset_en.html
tnyynt said:
http://www.hardreset.eu/htc_touch_diamond_hard_reset_soft_reset_en.html
Click to expand...
Click to collapse
Yes, I've tried that, but it acts like I'm doing a soft reset. I've tried holding vdown and enter for over 30 seconds after hitting the reset button (yes the buttons are pushed even before/during reset button is pushed)
nub4life said:
Yes, I've tried that, but it acts like I'm doing a soft reset. I've tried holding vdown and enter for over 30 seconds after hitting the reset button (yes the buttons are pushed even before/during reset button is pushed)
Click to expand...
Click to collapse
Can you check something for me? Manually go into bootloader and report back.
tnyynt said:
Can you check something for me? Manually go into bootloader and report back.
Click to expand...
Click to collapse
Hi, what do you mean by bootloader?
If you mean the screen with the 3 colours I have been there. It says Serial on the bottom and if I plug in my USB it says USB.
good news!
Well if you want to hard reset your telus device, its a little different. Dont know why, but it was a little trial and error for me and my diamond.
Goes like this:
Hold vol. Down, Center button, and POWER (tricky one) and then press reset. let go of reset and you should be good.
Dont know why they dont TELL us these things...
Joeball88 said:
Well if you want to hard reset your telus device, its a little different. Dont know why, but it was a little trial and error for me and my diamond.
Goes like this:
Hold vol. Down, Center button, and POWER (tricky one) and then press reset. let go of reset and you should be good.
Dont know why they dont TELL us these things...
Click to expand...
Click to collapse
Excellent! Using that combination of keys, I was able to get to the hard reset confirmation screen twice in two attempts, after failing miserably without the Power button! It's just the contortions required to get the Power button at the same time that's a challenge!
Clint
Alright!
Well glad I could be of some help, considering how much help the others in the fora have given me.
It just irks me that even the product manual that comes with the Telus Diamond gives us the wrong combination of keys for the hard reset. Bet you that customer service would be useless here as well.
Joeball88 said:
Well glad I could be of some help, considering how much help the others in the fora have given me.
It just irks me that even the product manual that comes with the Telus Diamond gives us the wrong combination of keys for the hard reset. Bet you that customer service would be useless here as well.
Click to expand...
Click to collapse
It worked like a charm. I posted the solution on HoFo as well, cuz I'm sure there'll be a lot of hard resets coming soon. Thanks so much for your help.
Joeball88 said:
Well glad I could be of some help, considering how much help the others in the fora have given me.
It just irks me that even the product manual that comes with the Telus Diamond gives us the wrong combination of keys for the hard reset. Bet you that customer service would be useless here as well.
Click to expand...
Click to collapse
I e-mailed HTC tech support yesterday morning, and this was their reply:
===========================================
Thank you for your inquiry about the hard reset process for the Telus Diamond.
I understand that you had issues performing the hard reset with the Touch Diamond. The printed instructions are correct. Pressing reset is sometimes difficult with the Diamond model, but the Reset button simply powers the device off and back on. I recommend my customers remove the back cover to get better access to the Reset button. By holding Volume Down and Enter and powering on the device from an off state, it begins the hard reset process. When you use the Reset button, you simply ensure the device will turn off, then back on while holding the other keys.
We appreciate you letting us know about this issue.
===========================================
I e-mailed them back to tell them they were wrong (again). I also advised him that it's physically impossible to reset the device without taking the cover off, as he was apparently unaware of that, either. I'd like to see a video of one of their people trying to reset the phone using their instructions.
Clint
Hello everyone.
I am new to the whole custom rom and flashing thing, but after some reading and researching I decided to backup my stock rom and flash a custom one.
So I did successfully, to the point when the flash is done and I should do a so called Hard Reset. I've done the hard reset thing before and it worked, but now when I hold the both "silver" couloured buttons and the powerbutton at once the phone vibrates once and start booting.
I just don't know how to proceed with this since my X1 won't go in to Hard reset mode, I have no idea why or what I should do, so please, anyone just give me a hint and make my day.
Sorry if this is a totally useless thread for everyone else and it's just being annoying, but I really need some help here guys and girls.
Thanks in advance / Anton.
You probably just haven't gone through this procedure:
http://forum.xda-developers.com/showthread.php?t=431218
Hope that solves it
Good luck!
Actually I did, I followed BioVolt's videoguides on every step and when I checked afterwards on the tri color bootloader-screen it said: "KOVS110 SPL-0.72.01iNex" wich indicates that the Hard SPL procedure was successful.
Thanks for the hint tough, problem still not solved...
blondyz said:
Actually I did, I followed BioVolt's videoguides on every step and when I checked afterwards on the tri color bootloader-screen it said: "KOVS110 SPL-0.72.01iNex" wich indicates that the Hard SPL procedure was successful.
Thanks for the hint tough, problem still not solved...
Click to expand...
Click to collapse
I had the same problem - what you need to do is NOT hold the power button for long, just for like a second then it should work.
I too faced hardreset problem earlier, then later i found the following procedure holds corrects, atleast for my mobile. What i do is, press both silver buttons at a time and press power button only once and leave it(just press and leave only power button not the silver colored ones)..after few secs it will go to hard reset mode...
Try holding down the volume down button and the power button to go into the bootloader mode. From there, continue with your normal hard reset procedure which is holding down the 2 silver buttons and then press the reset button.
You only need to hold the two soft keys (silver buttons) to get into hard reset mode. if your phone is off, then you only need to tap the power button to turn on the phone, not hold it, but continue to hold the silver keys until you get the grey screen.
Hope that helps
blondyz said:
.....
So I did successfully, to the point when the flash is done and I should do a so called Hard Reset. I've done the hard reset thing before and it worked, but now when I hold the both "silver" couloured buttons and the powerbutton at once the phone vibrates once and start booting.
I just don't know how to proceed with this since my X1 won't go in to Hard reset mode, I have no idea why or what I should do, so please, anyone just give me a hint and make my day.
................
Click to expand...
Click to collapse
You need to completely shutdown your X1 first before hardreset. I mean COMPLETELY: remove your battery for at least 5s, then attach it and hard rest your device.
Thanks alot guys, actually the problem got solved by now, I treid a method I hadn't heard of before where you hold your two softkeys and under the battery cover give the "stylus hole" a push..
Worked just fine! Thanks alot to everyone bothering to help me, it's thanks to you guys I now have a working X1
Kinds regards / Anton.
the reason why its hard for people to hard reset from when its off is because they're holding the power button as well as the two silver keys!
you just hold the two silver keys and press the power key once, quickly.
keep holding the two silver keys until press R comes up!
Hi,
I just purchased screen locked phone (requires password to unlock). I thought hard reset will fix it but it does not do anything.
I hope volume UP and volume DOWN buttons simultaneosuly while phone if off then press Power button and release it while continuing holding VolUP and VolDown but nothing happens - phone stays on locked screen. Does this procedure works on locked phones?
Mmmm...
Make sure you're holding the buttons in firmly while you briefly press the power button. It doesn't matter that the device is password protected, all the data will be cleared and set to default ROM settings.
If the device just switches on, it means that one or both of the volume buttons weren't completely pressed when you hit the power button
I tried like 10 times already. I hold both buttons very tight but after pressing power, it just comes back to unlock screen.
artisticcheese said:
I tried like 10 times already. I hold both buttons very tight but after pressing power, it just comes back to unlock screen.
Click to expand...
Click to collapse
can u get it into bootloader mode?
How do I get into bootloader mode?
I can not connect activesync becouse device is locked.
artisticcheese said:
How do I get into bootloader mode?
I can not connect activesync becouse device is locked.
Click to expand...
Click to collapse
hold volume button down and press power button. if you can do this just flash a new rom from the sd card.
This does not do anything either. I hold vol down button while phone is off and press briefly power while still holding button and nothing happens. It comes to load screen.
artisticcheese said:
This does not do anything either. I hold vol down button while phone is off and press briefly power while still holding button and nothing happens. It comes to load screen.
Click to expand...
Click to collapse
its starts booting windows mobile? or tri color screen?
No. it does not do anything. It acts if I just press Power button. Both volume buttons work fine since I can adjust volume
artisticcheese said:
No. it does not do anything. It acts if I just press Power button. Both volume buttons work fine since I can adjust volume
Click to expand...
Click to collapse
well damn...... ill try to help u out, ill do some looking around and get back to u.
Hard reset
Be sure first that device (not the screen) is turned off, then:
http://www.hardreset.eu/htc_touch_diamond_2_hard_reset_soft_reset_en.html
Thanks,
I figured this out. I was so stupud, I understood phone is off is like screen is Off. It actually meant the whole phone is off instead (had to remove battery for that).
The First thing you need to do: Power-OFF your device.
since it's locked, software interaction may not possible. you need to take the battery out, and put it back in 2-3 seconds later
Then, hold VOLUP and VOLDOWN tightly, and hit the power button to start the hard reset procedure.
htc inspire
hello friends I have the same problem do you fixt your phone? if yes please let me know how you did it please
Thanks I solved my problem..
Hard reset
I have samsung galaxy fit. and forgot the password nothing happen even reboot the phone. does any one help me
So I have been trying to overcome the issue of power + vol up (held for 10, 15 seconds\ and more) not working on my device. No matter how long I hold the two it just won't reset the device.
At first I figured it could be kernel as that is the lowest code that I've knowingly changed.
Changing to back to stock kernel did not fix it.
I thought it could be any sort of thing so I redownloaded the NL 434 firmware and then also universal generic 434 firmware and flashed back to completely stock with flash tool, doing all wipes and excluding nothing.
Neither of those firmwares fixed the issue, the hard reset function still won't work on my device.
Additional info:
Both buttons function fine individually and can see no obvious reason to suspect it's a hardware fault (though see that it is feasible, just less likely).
I can confirm that it was working initially.
I have an unlocked boot loader.
The last time I can remember it functioning was prior to boot loader unlocking - the first thing I flashed after unlock was cm10.1 and I got stuck in sideload mode with no hard reset to get me out lol
Otherwise the device is fully functional. For the time being I am back on KA07 xperia revolution rom, with advanced stock kernel (cwm) from DooMLoRD.
If anyone has any suggestions or insight it would be greatly appreciated if you'd drop a comment :good:
EDIT:
I've restored back to 350 with EMMA, but to no avail . It did however tell me that my boot version is : 1264-2309 S1_Boot_Lagan_1.0_2
Is there anyway to change the bootloader :S
After getting home I tried re-locking the bootloader which didn't work.
really starting to wonder if I should be taking it back in as hardware fault.. wonder how that will go since I unlocked the BL
If anyone would be so kind as to do a quick test for me, would you please be able to go into service mode (open dialer type *#*#7378423#*#*) then go into service tests and select the buttons and switches one (I think that's what it's called )
When you hold down the volume up or down button, is it registering as 1 press, or several, continuous presses?
Cheers
DreadPirateDan said:
If anyone would be so kind as to do a quick test for me, would you please be able to go into service mode (open dialer type *#*#7378423#*#*) then go into service tests and select the buttons and switches one (I think that's what it's called )
When you hold down the volume up or down button, is it registering as 1 press, or several, continuous presses?
Cheers
Click to expand...
Click to collapse
Not entirely sure what you are asking, keyboard and switch, volume up only shows as volume up and volume down as just volume down, regardless if you hold it down or press it over and over again, or if you just press it once. Not sure if I am an idiot, but I couldn't work out how to test the keyboard from there.Although one interesting part is that is states it is not a test for the softkeys, but tests them fine
danw_oz said:
Not entirely sure what you are asking, keyboard and switch, volume up only shows as volume up, regardless if you hold it down or press it over and over again, or if you just press it once. Not sure if I am an idiot, but I couldn't work out how to test the keyboard from there.Although one interesting part is that is states it is not a test for the softkeys, but tests them fine
Click to expand...
Click to collapse
Yeah that was the menu I meant.. couldn't remember lol. Ok so when I would hold down volume up it plays a repetitive tone and the text on screen states "vol up", then "vol up vol up" for the longer I hold it (and the beep/sound keeps replaying... confusing sounding I know
When you hold the volume up botton down, does it just beep once and display vol up (exactly like if you were to press it once and release)?
Basically if I were to press it once, the phone would make a sound and the screen would display "vol up"
If I hold it down however it will register as a new press and the "vol up vol up" texts keeps refreshing as-though it was a new key press.
Also thank you very much for checking it out :victory:
DreadPirateDan said:
Yeah that was the menu I meant.. couldn't remember lol. Ok so when I would hold down volume up it plays a repetitive tone and the text on screen states "vol up", then "vol up vol up" for the longer I hold it (and the beep/sound keeps replaying... confusing sounding I know
When you hold the volume up botton down, does it just beep once and display vol up (exactly like if you were to press it once and release)?
Basically if I were to press it once, the phone would make a sound and the screen would display "vol up"
If I hold it down however it will register as a new press and the "vol up vol up" texts keeps refreshing as-though it was a new key press.
Also thank you very much for checking it out :victory:
Click to expand...
Click to collapse
Yep exactly as you say here.
Volume up once shows just volume up beeps once, twice shows volume up twice and beeps twice . Holding it down beeps over and over again and shows volume up twice.
Pressing volume down once from here (volume up volume up) shows volume up volume down, press volume down once more now shows volume down twice.
Hope this helps
danw_oz said:
Yep exactly as you say here.
Volume up once shows just volume up beeps once, twice shows volume up twice and beeps twice . Holding it down beeps over and over again and shows volume up twice.
Pressing volume down once from here (volume up volume up) shows volume up volume down, press volume down once more now shows volume down twice.
Hope this helps
Click to expand...
Click to collapse
Yeah it helps that I can probably assume that my buttons work fine.. I was thinking maybe they weren't registering as long pressed or something but apparently not this is really frustrating. Especially when an app freezes and I just have to sit there indefinitely till it comes back online or the battery goes flat
And I have no idea if it's something I did or something with the phone.
All I know for sure is that brand new it did work as I hard reset a couple times. Then I unlocked the bootloader and have no memory of it working since then... It makes no sense to me why completely returning to stock and relocking the bootloader has no effect though.
DreadPirateDan said:
Yeah it helps that I can probably assume that my buttons work fine.. I was thinking maybe they weren't registering as long pressed or something but apparently not this is really frustrating. Especially when an app freezes and I just have to sit there indefinitely till it comes back online or the battery goes flat
And I have no idea if it's something I did or something with the phone.
All I know for sure is that brand new it did work as I hard reset a couple times. Then I unlocked the bootloader and have no memory of it working since then... It makes no sense to me why completely returning to stock and relocking the bootloader has no effect though.
Click to expand...
Click to collapse
Yeah, I could imagine. You will have to find a cool fast battery draining game to help you along .
Not sure that it would be related to you unlocking the boot loader, otherwise I am sure quite a few would have mentioned that before now.
Do you even get the first vibrate confirmation? Have you tested the vibrate from the same service test menu?
danw_oz said:
Yeah, I could imagine. You will have to find a cool fast battery draining game to help you along .
Not sure that it would be related to you unlocking the boot loader, otherwise I am sure quite a few would have mentioned that before now.
Do you even get the first vibrate confirmation? Have you tested the vibrate from the same service test menu?
Click to expand...
Click to collapse
That what I'm thinking - can I seriously be the only one having this problem. And why the hell does everything else work perfectly fine lol.
And no I don't get any sort of response (vibration or anything). Normally it just results in the volume turns up then the screen locks or display just times out but even after a minute of holding pwr + vol up nothing happens and the phone is simply in sleep mode. Otherwise vibration works fine.. currently I'm restoring the backup I made of the out of the box stock rom.. that's pretty much the absolute last thing I can think of that might do anything. Trouble is I don't remember if I made the backup before or after unlocking the bootloader.. can't remember if I flashed a custom kernel to get CWM or installed it otherwise...
DreadPirateDan said:
That what I'm thinking - can I seriously be the only one having this problem. And why the hell does everything else work perfectly fine lol.
And no I don't get any sort of response (vibration or anything). Normally it just results in the volume turns up then the screen locks or display just times out but even after a minute of holding pwr + vol up nothing happens and the phone is simply in sleep mode. Otherwise vibration works fine.. currently I'm restoring the backup I made of the out of the box stock rom.. that's pretty much the absolute last thing I can think of that might do anything. Trouble is I don't remember if I made the backup before or after unlocking the bootloader.. can't remember if I flashed a custom kernel to get CWM or installed it otherwise...
Click to expand...
Click to collapse
I would recommend re unlocking the bootloader, the problem is a kernel level driver or hardware but it is definitely around that level.
Did you have any problems, or errors when you first unlocked the bootloader? Maybe Doomlord could give you some of his incredible knowledge on the subject
Sorry but are you trying to reboot the phone from a frozen state?
Sent from my C6603 using xda premium
Maddhouse said:
Sorry but are you trying to reboot the phone from a frozen state?
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
No the phone is 100% operational outside of the hard reset not working. It is just when I get stuck in a app that freezes or when CWM recovery tricks out and freezes I have to leave the phone for ages till either it a)unfreezes after an hour or so somehow, or b) the battery dies and it shuts off after a couple or more hours.
When your phone is out of action every second day simply cause you can't turn it off it gets pretty annoying haha. If it had a removeable battery I could easily live with it and just rip the batt out no dice.
Power + volume up + down all together
Sent from my C6603 using xda premium
Maddhouse said:
Power + volume up + down all together
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
He has tried that if you read the OP
danw_oz said:
He has tried that if you read the OP
Click to expand...
Click to collapse
I thought i couldnt see it, what post number is it?
Maddhouse said:
I thought i couldnt see it, what post number is it?
Click to expand...
Click to collapse
The very first
danw_oz said:
The very first
Click to expand...
Click to collapse
So I have been trying to overcome the issue of power + vol up (held for 10, 15 seconds\ and more) not working on my device. No matter how long I hold the two it just won't reset the device.
Can you change the bootloader? - Hard reset no longer working, Any insight?
So I have been trying to overcome the issue of power + vol up (held for 10, 15 seconds\ and more) not working on my device. No matter how long I hold the two it just won't reset the device.
At first I figured it could be kernel as that is the lowest code that I've knowingly changed.
Changing to back to stock kernel did not fix it.
Click to expand...
Click to collapse
Maddhouse said:
So I have been trying to overcome the issue of power + vol up (held for 10, 15 seconds\ and more) not working on my device. No matter how long I hold the two it just won't reset the device.
Click to expand...
Click to collapse
Yeah thats the one
Maddhouse said:
Power + volume up + down all together
Click to expand...
Click to collapse
Already tried that but no luck.
Stranger still is that I've began to notice that in flash mode the LED briefly flick green once then turns off when entering flash mode. Flash mode is still active, it just appears as though the phone is off :/