Database Develop

Installation stops when I reach 85%

I have tried to update my ROM on my QTEK 9100 to version 2.17.17. When I reach 85%, it stops and gives me an error message 326.
Any help would be EXTREAMLY appreciate!

msmobiles.com:
ERROR [320~328] : INVALID COMMAND
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.
Click to expand...
Click to collapse

Thank you
Send it back for repair or flash a new ROM?

I've never encountered this error myself so I really doesn't understand exactly what it means... I would however try to reflash several other roms before sending it to a service center...
oh, can you get to bootloader mode by any chance? (pressing the two buttons on the right side and resetting the device). From there you should be able to flash a new rom.

I had the same problem... 95% and the Invalid command error. I was flashing the original Tmobile UK ROM. Now trying to flash another ones..

[email protected] said:
I have tried to update my ROM on my QTEK 9100 to version 2.17.17. When I reach 85%, it stops and gives me an error message 326.
Any help would be EXTREAMLY appreciate!
Click to expand...
Click to collapse
Try unlocking again if you did before.
--M

did I brick my phone? :(

Hi all, tried to upload my Wizard (8125) G4 to WM6 blackDiamont but it got stuck for more than 50 minutes with shellTool....
Now the phone is stuck on the screen that shows IPL/SPL, GSM and OS. From there i can force it to a hard reset but nothing happens..
Is there a way to get it working again or it just died?

marcelo1251 said:
Hi all, tried to upload my Wizard (8125) G4 to WM6 blackDiamont but it got stuck for more than 50 minutes with shellTool....
Now the phone is stuck on the screen that shows IPL/SPL, GSM and OS. From there i can force it to a hard reset but nothing happens..
Is there a way to get it working again or it just died?
Click to expand...
Click to collapse
Turn the device on and Flash the original ROM or Wizard Love Rom.
Wizard Love can be found here http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar

Yeah, thanks man!
well, now trying to load Cingular's 2.25.11.1 WWE the update process got stuck in 95% and shows
error [326]: Invalid Command
This NBF file cannot be used for your PDA phone....
Is there possible that perhaps using Wizard love rom i'd have luck ?

marcelo1251 said:
Yeah, thanks man!
well, now trying to load Cingular's 2.25.11.1 WWE the update process got stuck in 95% and shows
error [326]: Invalid Command
This NBF file cannot be used for your PDA phone....
Is there possible that perhaps using Wizard love rom i'd have luck ?
Click to expand...
Click to collapse
You should be successful with Wizard Love. Good Luck!

Please help, and please dont abuse

Hi Guys, I have bricked my Cingular branded BA Siemens SX66 PH20B. I am getting the no GSM error, I have read the WIKI and read the thread that follows Help, my device shows "No GSM" after upgrading, and I can not perform any more ROM upgrades Link. I have tried the steps and nothing seems to be working, I guess I must be a complete noob but i have spent hours trying to get the radio to install and nothing will work. I have spent 6 or 7 hours looking on here before i requested help I was running the radio unlock when a tree took out the power line to my house. I edited the ruu.conf and that didnt help I ran the MaUpgradeUt_noID.exe and it will update my rom with no problems at all it just hangs at the radio install and wont go anywhere i get a "Error 114: Radio update error" If someone can help I would appreciate it.

Might help.
I'm not quite sure about your problem but I did get the same radio update error couple times. One thing that I had to do is to let my computer (active sync) recognize my device first. After that the redio update error is gone.

I got it fixed, what i did was install an original rom from seimens that i got at SX66 (Blue Angel) Standardization Project, itfixed the radio error and then i could reinstall the updates

[Q] [q] topaz wont start

Hi folks,
i used several roms from here, worked nicely.
had spl 1.33.OliNex i downloaded latest energy rom and did update from SD.
it wrote update success, then i reseted topaz.
now im stuck on boot screen with tmobile logo and RDG message.
i tryed to upgrade radio and do the flash again but again success message and screen hang on tmobile logo. tryed hard resets etc, same result.
i just got
R 4 49 25 91
G 61.44etc 25 35U
D2.13.64695
message on bottom, nothing more.
i wonder if its not problem that i have older hspl, but i dont know how to upgrade it without having system booted and connected to PC...
Anybody can help me?
-------------------------
managed to update spl to 2.51,
did the flash again, again success message and this time it runs
So, maybe it will at least help other ppl

grapher said:
Hi folks,
i used several roms from here, worked nicely.
had spl 1.33.OliNex i downloaded latest energy rom and did update from SD.
it wrote update success, then i reseted topaz.
now im stuck on boot screen with tmobile logo and RDG message.
i tryed to upgrade radio and do the flash again but again success message and screen hang on tmobile logo. tryed hard resets etc, same result.
i just got
R 4 49 25 91
G 61.44etc 25 35U
D2.13.64695
message on bottom, nothing more.
i wonder if its not problem that i have older hspl, but i dont know how to upgrade it without having system booted and connected to PC...
Anybody can help me?
-------------------------
managed to update spl to 2.51,
did the flash again, again success message and this time it runs
So, maybe it will at least help other ppl
Click to expand...
Click to collapse
Did you try going into bootloader first and then running the RUU.exe?
Or you can look HERE about making a Goldcard with Qmat (#6)
EDIT: Didn't see that you updated your post, congrats on gettin it workin again though

Kaiser - Cant flash back to WM after flashing Android

Hi there, I have a problem with my HTC Kaiser
I've managed to unlock it and flash any rom and radio i wanted, everything worked perfectly, I've had HardSPL 3.34 if i remember correctly
Them, i tried running android, flashed, started booting and... din’t boot. It starts booting but it stops with the following message: [4.2.08726] fake_vsync_int
No problem, i will just reflash back to WM6.1 and get going, BUT... i could not reflash anymore
I noticed that my SPL version has changed, it now shows: KAIS120 - SPL-3.34.0000 - CPLD-8 - USB
I could not flash any roms I've had, searching around i tried many solutions even trying flashing using the MicroSD card without luck
The errors: Either stays at 0% and... ERROR [262] : UPDATE ERROR
or
Gets to 1% and... ERROR [294] : INVALID VENDER ID (When flashing from USB)
Or remains stuck at “loading...” (When trying flashing from MicroSD)
Looking around i found that what i need was to flash the stock rom that came with my Kaiser, my kaiser was WM 6 Portuguese Brazilian, so i got the rom: RUU_Kaiser_HTC_WWE_PTBR_1.88.514.1_PTB_Shipped
Din’t worked
So i tried every rom found here: http://www.shipped-roms.com/index.php?category=windows mobile&model=Kaiser
Din’t worked either
So i tried every other rom i could find, from Chinese roms in support.htc.com to roms found online on file sharing sites, none of them worked
This is a similar problem encountered by Warbyte here, and -Rif- Here, -Rif- managed to find the correct rom, apparently Warbyte din’t have as much luck, to quote him: “Apparently the only solution is to find the matching original ROM which puzzles me as there apparently exists none”
Without other ideas i decided to come here and ask for advice, since i don’t know what else i could try
Any ideas? Thanks for your time.