Need some advice..perhaps an idea for all.. - Tilt, TyTN II, MDA Vario III General

Hi there,
Everytime after I used/ installed a new, fresh made ROM on my Kaiser, I have to install the same software, again and again..... like TomTom, Coreplayer, SKTools and so on.... That takes time and is soooo boring.
Is there a solution to make one exe file that includs all the software I want to install, like a batch file...
Is this possible and if it is, how can I make it and adjust it when I want to add or remove software...
Who can help me with this issue?
Greets from Holland,

SASHIMI will install software to the loaction you wish, install your reg edits & more

Related

.cab queries

Hi,
I need some assistance. I am currently cooking my extended rom. My Extended rom does not have enough space so, i am putting some of my MUST HAVE softwares in my storage so that it installs after a HARD RESET.
But, most .cab files will auto delete upon launch. Is there any way to make
it not delete ? Kindly assist.
Thanx a million
You can avoid the CAB files being deleted by making them read-only.
Well i mean that there is a Registry hack that will not delete .cab's on installation, but you would have to make a .cab with that registry setting and install it as the first thing after hardreset, although i dont think it will work since the registry is already loaded, and the new setting require a reboot to work.
Look in Wiki for registry hacks.
So why dont you just Write protect the .cab's that you want to hold on to
bosjo said:
Well i mean that there is a Registry hack that will not delete .cab's on installation, but you would have to make a .cab with that registry setting and install it as the first thing after hardreset, although i dont think it will work since the registry is already loaded, and the new setting require a reboot to work.
Look in Wiki for registry hacks.
So why dont you just Write protect the .cab's that you want to hold on to
Click to expand...
Click to collapse
i have tried that but, dont work
All my "wanna hang on to" .cab's are write protected, and non of them get deleted upon installation.
Manuel installation that is.
bosjo said:
Well i mean that there is a Registry hack that will not delete .cab's on installation, but you would have to make a .cab with that registry setting and install it as the first thing after hardreset, although i dont think it will work since the registry is already loaded, and the new setting require a reboot to work.
Look in Wiki for registry hacks.
So why dont you just Write protect the .cab's that you want to hold on to
Click to expand...
Click to collapse
ermm.. how do i go about it... i wanna auto install stuff like Pocket Informant , SPB Pocket Plus and my must have s/w upon hard reset
Thats why i need to coookkk
I have room enoughf in my ExtRom, so I have never auto installed from other than the ExtRom.
But I'm almost 100% sure that there was a topic on auto installing from \Storage (Card) sometime ago.
Maybee youll find some info in the Wiki
http://wiki.xda-developers.com/index.php?pagename=BA_RomKitchen
bosjo said:
I have room enoughf in my ExtRom, so I have never auto installed from other than the ExtRom.
But I'm almost 100% sure that there was a topic on auto installing from \Storage (Card) sometime ago.
Maybee youll find some info in the Wiki
http://wiki.xda-developers.com/index.php?pagename=BA_RomKitchen
Click to expand...
Click to collapse
well, i dont seem to find anything of what i am looking for
Wait a day or two, maybe someone who knows come along.
You can use a software name Cabinst wich let you install a cab without deleting it.
Easy.
Hi,
Easiest way is to make cab read only. Browse the storage card using PC via activesync. Right click on cab file. Go to properties and make it readonly.
You can also change the deafult beahvior of Instal by changing registry key.
Shikra said:
Hi,
Easiest way is to make cab read only. Browse the storage card using PC via activesync. Right click on cab file. Go to properties and make it readonly.
You can also change the deafult beahvior of Instal by changing registry key.
Click to expand...
Click to collapse
change which part of it ?
http://forum.xda-developers.com/viewtopic.php?t=16377
M4io said:
in browsing my editor i stumbled upone these :
Code:
[\HKLM\SOFTWARE\Apps\Microsoft Application Installer]
fAskDest=0
fAskOptions=0
fEnablCef=0
nDynamicDelete=2
Supported="PALM PC"
* fAskDest=1 gives you a popup when you install a CAB so you can install on Storage Card for example
* fAskOptions=1 asked before overwriting, haven't found out if/what other options
*fEnableCef : I haven't messed around with that
* nDynamicDelete=0 and the CAB file remains, =1 it disappears but what the difference with the default value 2 is I couldn't figure out.
So if anyone else wants to experiment with it and post their findings
I searched Google but all I could find was about fAskDest
Click to expand...
Click to collapse
keep the ext rom empty,
after reboot hack the reg to point to new area.
Run the autorun from threre.
Have all files as read only.
info under
http://forum.xda-developers.com/viewtopic.php?p=83119#83119
Only problem is that all cabs are installed in the default location.
I have yet to get cabinstall to run in batch mode using the nscript tool.
Hope its what you are after

Please help a new Kaiser owner, Mac-based

Hello all. Just got my phone on Orange and I like it. I have been a Mac-user for the past 12 years so I am used to not tweaking my gadgets. Can someone explain how I install the CABs onto my Kaiser via either my G5 iMac or my intel Macbook. Many thanks
do'h not very sure, but you might want to try the missing sync, grab the latest version, it now supports win5 and 6. basically that's what you need to synch your mac and PDA, but not very sure if you can install 'em through it though
Now how do I find the installed CAB
OK I have downloaded a CAB onto the Kaiser via Missing Sync. (HTC album mui 0419.cab) So how do I now find it on the phone and activate it or any other CAB?
Thanks again
not that hard
I get that you're new, I am too, but try to figure this stuff out by yourself.
Bluetooth should work for getting files onto the phone (my docs/bluetooth)
When you sync to the phone, the PC version is that you see the phone on the schema/folder tree and can choose where to put it.
When you find the cab file, opening it will install it. Generally try to put system specific things on main memory and things like games on a storage card.
Look at some must have threads to find programs that you like and after you figure it out try a hard reset and reinstall things. That will let you keep a stable device.
As for ROMS, I would be careful of even thinking about flashing on a mac unless you find a thread telling you how to do it, you don't want a bricked device.
Remember to search the forums - it's worth your time.
Just mount the kaiser with missing sync. After that, drag and drop the file to a location that you can remember. Once you do that, just go to the file explorer in the kaiser, locate the file, and click. You should be all set.
what about a non-cab files? with an .exe extension, will it be installable trough missing sync?
from what I can remember, Missing Sync is really broken at the moment. (under 10.5).
To install a cab, you just use the tab next to syncronize, what is it, the file tab or somehing?
if it's a .cab, it will be loaded automatically. But make sure there's no spaces/irregular characters on the .cab, otherwise, it won't load the installation, and possibly, the file will not be uploaded at all. I think this is a missing sync bug.
Nope, you're going to have to pull the .CAB out of the .EXE file
jakontil said:
what about a non-cab files? with an .exe extension, will it be installable trough missing sync?
Click to expand...
Click to collapse
chenga said:
Nope, you're going to have to pull the .CAB out of the .EXE file
Click to expand...
Click to collapse
hi chenga, mind to point me how to do so? because i am going to lose my XP system very soon

Camera not working anymore

Hi,
i flashed the TOFCLOCK HIMA WM6 AKU.0.7.0 Fresh
upgrading from WM5.
After that I restored a Sprite-Backup that I made from
WM5 to get all my Apps up and running.
Everything works fine so far, only the camera-button is
not working. It says "Error opening the shortcut or locating
the target filename".
I tried to reconfigure the button under Start->Settings->Button
but there I cannot find the Camera Application???
It is gone somehow. I also dont find it with file-explorer.
Can someone tell me the NAME of the Application, where it should
be located? \Windows - folder I guess???
And can I separately install it, do I only need the exe or also some
dlls.
Can someone provide me the files?
Thanks in advance for any help
Greetings
did u hard reset it after Flashing
the NO,YES,YES Way
Yes, I did this.
I also checked the camera BEFORE applying my Sprite-Backup
and it worked there.
Unfortunately I did not check the filename of the camera app
or saved it.
It is a bit strange since I dont know exactly how sprite backup
applies its backup...
Also I dont want to redo the complete flashing process since
my sprite backup is not up to date right now and my pc for
syncing is at my workplace...
So my Idea was to just "reinstall" the camera app or just
copy the files to the pocketpc to get it working again.
The problem is your backup..u say that u made the backup from Wm5 and restored it to WM6....Even windows has some limitations...WM5 Is a lot different then Wm6.U cant run WM5 Backup on WM6..my advise is that u hard reset it and then see if its working
I know that sprite backup causes the problem.
but I use some apps (financial and business organization)
that I dont know how they store their data on the pocketpc
and they dont sync anymore with vista and new windows
mobile center.
Currently spritebackup is the only way I get them to work again
on WM6 ;-) so I need to apply it.
Since I dont have any other problems right now beside the
camera I am pretty happy with WM6 on my "old" device.
I dont need camera very often but every now and then it
comes in quite handy.
I guess I wait till i come back to my workplace next year,
make a current sprite backup then reinstall WM6, save camera app,
apply sprite backup, apply camera app ...
and see if it is working.
Hi, tschombe
go 2
windows\start Menu\Programs\camera.lnk
the shortcut should read
:MSCAMERA?shellres.dll,-8263
then soft reset
first copy the shortcut from ur ppc to pc and drag it on a notepad..their u will see what hesham wroted..if it doesent match..fix it..and overright the shortcut by copying it back
sorry, I was on vacation for a while.
I tried the above solution, there was NO shortcut, so I created
a new one with notepad and copied it to my ppc
Now I have a shortcut that opens FileExplorer on the root folder,
when I tab the shortcut?

Installing Cab file

if i find a cab, how exactly do I install it? i do have a registry editor, rescoe. I just got my new AT&T Fuze, and there are some issues, like hte fm radio, etc, and i see where people listed cabs for fixes, but I am a newbie and not sure how to install these.
pam0566 said:
if i find a cab, how exactly do I install it? i do have a registry editor, rescoe. I just got my new AT&T Fuze, and there are some issues, like hte fm radio, etc, and i see where people listed cabs for fixes, but I am a newbie and not sure how to install these.
Click to expand...
Click to collapse
Hi Pam, .cab or cabinet files are installed from within your device, just click on it and it will ask you where you want the files too be installed (device or storage card). You will find that there are .exe istaller files that can initiate the same process, but you have to be connected to your computer, which most of us don't like. It is an easy and clean way the install files directly in your device. I personally like to keep a lot of cab files in my storage card so that if I delete the cab or flash my device i can reinstall all my favorite applications again, no matter where I am

installed SPB shell 3 and chaos now

I installed the SPB shell 3on my Xperia and had lots of troubles with it, like no way to goes back to Today panel, no more X functions, and stall....but....I like it...
Now, I reinstalled the Xperia original software, and, if someone could tell me....Before installing the SPB shell 3, what exactly I need to do FIRST?
what Dll or else I MUST install first...
Thanks you
if U using stok ROM RAA1 maybe
try update ROM first
download spb 3.0 from the spb site. Then look up a serial somewhere. had no problems at all
It worked, for me without any modifications... I was on the R1 ROM at that point though.
hello
try to install with the exe file instead of the cab file
the cab file sometime block the x buttons
Xperrier said:
I installed the SPB shell 3on my Xperia and had lots of troubles with it, like no way to goes back to Today panel, no more X functions, and stall....but....I like it...
Now, I reinstalled the Xperia original software, and, if someone could tell me....Before installing the SPB shell 3, what exactly I need to do FIRST?
what Dll or else I MUST install first...
Thanks you
Click to expand...
Click to collapse
after install spb shell 3, clean ur star up at windows, delete all. use explorer.. n soft reset. now u can choose manuali 2 spb shell menu
All of you, many thanks for yours advises, and going to study first what is my Rom number and, if I update my Room from, say 1 to 3, do I still need the number 2? sorry my Rom, but, in Hungarian a Rom, is a gipsy, BTW....
I did not knew, a CAB file instead of an EXE file installer could make a difference.....then? a golden rule would be to use an .exe file instead of a cab file?
ok, going to try it and agin, thanks.....happy am I with the XPA forum....really
GOKILL said:
after install spb shell 3, clean ur star up at windows, Yes, but on the Xperia windows folder ....? not too clear for myself delete all.
sorry delete all. What do you mean? do I need a registry editor?
use explorer.. n soft reset. now u can choose manuali 2 spb shell menu,
sorry again what do you mean by manually?
Click to expand...
Click to collapse
thanks, and going to try also
I have lots of problem when install SPB as cab file. After i use exe file and now work perfect. Why is that i dont know
DiabloSoul said:
I have lots of problem when install SPB as cab file. After i use exe file and now work perfect. Why is that i dont know
Click to expand...
Click to collapse
ok, and what Rom do you have? or use? thanks
then it must be something into the cab file..
Try the trial of SPB 3.0.1, not 3.0. Google to find it. This resolves some issues.
Xperrier said:
thanks, and going to try also
Click to expand...
Click to collapse
no need registry editor, just clean up ur starup.. with file explorer. windows/starUp.. and delete spb mobile shell, in my case i choose dellete all.. coz make faster with starUp the X1. same like a PC.. the X1 might be crash booting if the has a lot program in starUp.
or u can just leave auto config and not dellete this
i'm sorry if my english is not fluently..
GOKILL said:
no need registry editor, just clean up ur starup.. with file explorer. windows/starUp.. and delete spb mobile shell, in my case i choose dellete all.. coz make faster with starUp the X1. same like a PC.. the X1 might be crash booting if the has a lot program in starUp.
or u can just leave auto config and not dellete this
i'm sorry if my english is not fluently..
Click to expand...
Click to collapse
perhaps your english is not fluent like mine, but, also, you are able to communicate with another language and, THAT, is the best...What is your native tongue? mine is french, then after a small english and then a very little hungarian...
thanks for you help sweetie
ring-bearer said:
Try the trial of SPB 3.0.1, not 3.0. Google to find it. This resolves some issues.
Click to expand...
Click to collapse
I will, but, after reading all the helpful post, I just found out my Xperia was still runing on Customization version R15A with the variant generik_uk,
Now after having made the update, I see that I have now the R2AA010, perhaps, this is also why I have or had, who knows trouble.... Do I also must update the generik UK ?
Now, if I like to try WM 6.5 do I must update thru the forum, tho the R3AA? or not? here, I am lost, and yes true cooking is ok with me but Rom and UI are not for me...better some Rhum and Coke...heahh
Now I do wonder if it would be also better to reformat my microcard? because I almost install all softwares into it.....
I flashed my X1 to nX1i ROM (found here) and it's working very well so far.

Categories

Resources