Database Develop

help storage card iam using 2gb kingsten sd card on my himalaya for abt 2 months ,sud

iam using 2gb kingsten sd card on my himalaya for abt 2 months ,suddenly yesterday my ppc says to read storagecard u have to format it to become readable ,i formated it and it works fine but after few hours its not shown on memory,but when i inserted my old 256mb card its shown ok.sorry for my english anybody plz help whats wrong

Its the card
Dude,
Its the memory card......
I had the same problem. Sometimes the card shows, sometimes it doesnt.......
One day, it just didt want to display at all......
It was also a Kingston 2GB (One of those adapted ones from MiniSD)
I bought a new one, works fine!
(Oh yes, the kingston cards apparenlty have a 5 year warrantee, if you have the slip!)

its becasue your card is corrupted..try to format it in your pc and hope it will work.else......

My Storage Card (2GB A-Data) started to act funny when I set the camera to store photos on Storage Card. It was if files were disapearing from it and even it seemed as if there is no Storage Card inserted at all. Once I set the camera to use main storage again and soft reset it all became allright again.

thanks for ur reply ,any software to format it on ppc
thanks for ur reply ,any software to format it on ppc.if its not shown on ppc how can i format it..or how can i format it using pc i have no hardware except data cable which connects himalaya to pc

install WM5torage on your ppc which will make you use your ppc as a cardreader..or you can try Resco explorer or i think Total commander

please ather can u
please ather can u tell me in detail how can i format storage card through wm5torage by pc ifts not shown on ppc,thanx

first install WM5torage on your PPC..then run the application and Activate it,,after that connect ur ppc via usb and a new driver will be found in your pc...after a little while a new drive will appear i.e your MMC..right click and format

ok i got it
ok i got it but wt format to i use to format my memorycard its shown on pc 1.86gb fat ot fat32

it says
it says ur memory card not appear to be in reading format and then format it but wt format it says fat32 and fat

ather it says
ather it say canot format disk is write protected even its not whats wrong

did u uncheck the read only option in WM5torage

it works u r really a master ather
it works u r really a master ather , i formated it by fat32(is it right or what format??) and it says 1910.75mb free and also shown on my ppc now thank u soo so much
ather just in case what was wrong in the memory card to do this and could it happen again?
again thank u so much.now i feel free thanks everyone takecare byee
PROBLEM SOLVED!!!!!

U are welcome my friend...the problem could have been caused by a virus or any software..maybe u ejected the card when it was in middle of something..this might have corrupted its sector..any way im glad i could help

Sd card not active in my phone !!!

Hey, i need a tweak to reconize the sd card in my phone, dunno what appened bet my sd card is not active in my phone,
Please, HELP me !!!
Edit : i can flash my phone with the sd methode but when go to file explorer in windows mobile cant read the sd storage card
conclusion : the sd card work but cant see it in wm

Format phone.

Tried this utility : X1_RUU_ROM_UpdateUtility
ftp://x1:[email protected]/XperiaX1/TOOLs/X1_RUU_ROM_UpdateUtility.zip
installed some other rom and its working, i see my storage card now thanks all

No image file !

hello all ! i have a problem with my xperia x1 . when i try to update my xperia to wm 6.5 , it shows No image file ! any help please,

Happens to me if i try flash from MicroSD.
If i try flash with an 8GB Samsung (Class 6) card, i get that error.
If i use my 1GB MicroSD card with the .IMG file, it flashes fine.
I always use the USB method though, flashes perfectly all the time

try formatting your microsd card as a FAT or FAT32 file system.
before placing the img onto your card.

I've this problem to!
I tryed usb method! When all done, my MS 8GB died!
=/

i format my micro sd in fat 32 , it's work , but it's shows "loading" and he stop there ! what i must to do ?? please ? excuse 4 my bad english

Maybe is problem with .nbh file. Some error during download. Try to download it again and than flash new file.

Try to do with Rom Update Utility!

I had the same problem too!! :O
SO I used the software one.... via USB... it worked... but I would like if all I need is the SD card... So that it can work on it's own...
I feel like a serious problem might happen and brick the phone... lol

rename (ruu_signed.nbh) to (Kovsimg.nbh)

So, here is how to flash new ROM with SD card :
0. Make HardSPL on device
1. Download ROM you want
2. Format SD card in PC with FAT32
3. Copy .nbh file on root of your EMPTY SD card
4. Rename .nbh file on card. It MUST be Kovsimg.nbh
5. Turn off your device and put SD card in. (it woud be good if battery is >50% full)
6. Press and hold Vol down and Power key until you see 3 color screen. Than release keys
7. Follow on screen instructions
8. After flashing is over, HARD RESET device.
9. After hard reset, SOFT RESET
Voila, enjoy your new ROM!
(steps 7 and 8 are here to be sure that every thing is in it's place)
(Take NO responsibility for bricked device )

U just use Check Disk Local in PC scaning micro sd whit connect USB (remember tick: Automaticcally fix file....) > OK

reformat ur card with fat32 and choose the largest available file allocation unit size when you format (it should be 32k....)

Moved to Q&A, Not ROM Dev

GenYBoot Android SD card problem

Hi,
Had been running throught the internet but can't find an answer. I have GenYBoot installed and Android 2.2.1 running from Internal storage of my HTC Touch Diamond. I have a problem with SD-card in Android which ... does not exist. If I want to save something it says that there is no SD-card - please insert the card. Device desen't see any additional storage than own memory (<200MB). There is no need to say it's anoying as it doesn't allow me even to download ringtones....
Could you advise please?
Thanks,
Andrew.

Solution
Just a simple trick
I don know what rom ur using, but i had da same prob
Jus delete every single file in the 4gb storage first, then put ur android files fresh ther and start the haret file from file explorer. This should do da trick, it did it for me.

andzia63 said:
Hi,
Had been running throught the internet but can't find an answer. I have GenYBoot installed and Android 2.2.1 running from Internal storage of my HTC Touch Diamond. I have a problem with SD-card in Android which ... does not exist. If I want to save something it says that there is no SD-card - please insert the card. Device desen't see any additional storage than own memory (<200MB). There is no need to say it's anoying as it doesn't allow me even to download ringtones....
Could you advise please?
Thanks,
Andrew.
Click to expand...
Click to collapse
just format your card in FTA32,,, it does work in my phone

Howro format the SD card to FTA32?

itrifler said:
Howro format the SD card to FTA32?
Click to expand...
Click to collapse
Alright first download this HP FORMAT TOOL
http://www.pcworld.com/downloads/file/fid,64963-order,4/description.html
second, copy all the contents from your INTERNAL SD only card onto your desktop
third, run the tool and choose between quick format [works for me all the time] or full format. Once done re-copy all your files back on the INTERNAL

C'ant do anything with my SD card

hi,
I cant do anything with my SD card. (I9000)
After disconnecting the phone from the computer they are disappering(did it like 20 times,always disappered)
I tried to format the sd in anyway , when I was inside the phone(through the settings),and when I tried through the recovery.nothing happed.
It's look like the SD dont want to accept any changes.
What should I do? I cant put ics because the problem,and I always getting FC for apps that can't be deleted.
Thanks a lot ,for the helpers .:crying:

Withdraws the sd from the phone use an adapter to put it in the pc and look if the data are workable through the pc. If it don't format the sd by the pc and retry .