Related
I posted about this in another thread, and thought I'd start a new one. I couldn't figure out how to delete my first post about it, sorry, guys.
Anyway, I tried to install a theme, and now I'm stuck on the G1 boot screen (the first one). It just hangs there, doing nothing. I Tried to go over it with the JF 1.3 update.zip in recovery, but it didn't work, the phone just hangs. Does anyone have any ideas? I'm traveling for the next few months, and I'm seriously screwed without a phone.
Thanks!
If you can't boot and can't get into recovery your only recourse is to flash the NBH file from the bootloader and start from scratch. Also, you really probably should not be performing modifications and hacks on your main phone without some kind of a backup. GL
jashsu said:
If you can't boot and can't get into recovery your only recourse is to flash the NBH file from the bootloader and start from scratch. Also, you really probably should not be performing modifications and hacks on your main phone without some kind of a backup. GL
Click to expand...
Click to collapse
I can get into recovery- that's how I managed to try to reapply the JFV1.3 update.
I probably should have been more clear about that.
Did you try a wipe in recovery? Alt+W
jashsu said:
Did you try a wipe in recovery? Alt+W
Click to expand...
Click to collapse
Yeah. No dice.
Perhaps the update didn't work because there was already an update.zip (the theme I tried to install) on my sdcard? When in recovery, what exactly do I type from adb to copy an update.zip from my sdk/tools directory to the sdcard? Do I need to have deleted the update.zip that was already on the card beforehand? I can't find a way of deleting anything from recovery.
Here's what I typed:
adp push update.zip /sdcard
I also tried:
adb push update.zip /sdcard/update.zip
I tried alt + s after both, and it went through the updating process, but I have no way of knowing if it tried to update using what I'd just pushed onto the sd card, or the old update that screwed up my phone. Did I at least put the update on the sdcard correctly?
Hope I'm making sense.
It sounds like you are applying the theme again. You need to try to delete that file from your sd card. The easiest way would be to get a card reader and delete what is on your card then put the new update.zip on it. If you can't get a card reader then you will have to find the linux commands to delete a file and use adb shell to execute the command. Good luck, you should be able to get your phone back.
zackmpls said:
I posted about this in another thread, and thought I'd start a new one. I couldn't figure out how to delete my first post about it, sorry, guys.
Anyway, I tried to install a theme, and now I'm stuck on the G1 boot screen (the first one). It just hangs there, doing nothing. I Tried to go over it with the JF 1.3 update.zip in recovery, but it didn't work, the phone just hangs. Does anyone have any ideas? I'm traveling for the next few months, and I'm seriously screwed without a phone.
Thanks!
Click to expand...
Click to collapse
same thing happened to me had to use JF rom to get it to work again. idk the linux command but i got an idea! if you dont have a card reader or another g1... you can try installing cupcake thru eng bootloader then convert back to JF's rom. Try that maybe it will work.
rm filepath/filename.extension
should be liek this
rm /sdcard/update.zip
If you are stuck in a loop, it's most likely due to using an ADP1 theme on an RC30 version of JesusFreke's release.
If that doesn't fix it, you will need to remove your apps manually through ADP, but let's take it one step at a time. Download and install JF's standard RC30.
trmacdonal said:
It sounds like you are applying the theme again. You need to try to delete that file from your sd card. The easiest way would be to get a card reader and delete what is on your card then put the new update.zip on it. If you can't get a card reader then you will have to find the linux commands to delete a file and use adb shell to execute the command. Good luck, you should be able to get your phone back.
Click to expand...
Click to collapse
That's what I was thinking, too. I managed to get to a reader this morning, and I was able to put rc30 on there, no problem. I'm up and running again!
I'm wondering why ADB didn't work to push the update to my card in recovery. Did I input the wrong commands? It acted as if it worked (took a couple minutes, showed the "28374 bytes blah blah" message".
Thanks a lot, everyone. I'm so relieved to have my phone again, and I've learned my lesson about modifying without backing up first.
i have the same problem what can i do !! ?
--------------------------------------------------------------------------------
i have downloaded and install themes on G1 !!
i have downloaded the file (Theme) and copy to my card and switched off my phone and then i have pressed home+on button then i have apply update from sd card !! it installed successfully but now i have started g1 after that g1 logo i can only see a blank screen !!
I am using CyanogenMod 4.1.999 !!! i have downloaded Theme from this page http://forum.xda-developers.com/show...talling+themes
Steampunk !!! ( as i said i have downloaded this file and rename it to update.zip and copy to my sd card then i have just applyd from my sd card since then when i start my phone i see T-Mobile G1 logo then all disappear and i can only see a light without anything !!!
Kuulthag said:
i have the same problem what can i do !! ?
--------------------------------------------------------------------------------
i have downloaded and install themes on G1 !!
i have downloaded the file (Theme) and copy to my card and switched off my phone and then i have pressed home+on button then i have apply update from sd card !! it installed successfully but now i have started g1 after that g1 logo i can only see a blank screen !!
I am using CyanogenMod 4.1.999 !!! i have downloaded Theme from this page http://forum.xda-developers.com/show...talling+themes
Steampunk !!! ( as i said i have downloaded this file and rename it to update.zip and copy to my sd card then i have just applyd from my sd card since then when i start my phone i see T-Mobile G1 logo then all disappear and i can only see a light without anything !!!
Click to expand...
Click to collapse
To fix your problem just reflash your ROM. It's always a good idea to keep it on your card even after flashing.
Only install themes that support the ROM you're on...
i tried installing a theme on cm's v.4.999, and also got stuck on the bootscreen, however i just rewiped my phone and stalled the rom again. am currently running kingklick hero 2.0
zackmpls said:
Yeah. No dice.
Perhaps the update didn't work because there was already an update.zip (the theme I tried to install) on my sdcard? When in recovery, what exactly do I type from adb to copy an update.zip from my sdk/tools directory to the sdcard? Do I need to have deleted the update.zip that was already on the card beforehand? I can't find a way of deleting anything from recovery.
Here's what I typed:
adp push update.zip /sdcard
I also tried:
adb push update.zip /sdcard/update.zip
I tried alt + s after both, and it went through the updating process, but I have no way of knowing if it tried to update using what I'd just pushed onto the sd card, or the old update that screwed up my phone. Did I at least put the update on the sdcard correctly?
Hope I'm making sense.
Click to expand...
Click to collapse
You simply need to rename the one you DON'T want to use- or if in recovery, choose "select zip", not "update zip" from the list of options. Did you do a Nandroid backup before flashing? if so, you can do a restore from that working backup. And again, to re-iterate what another responder said, make sure you do a wipe before flashing again.- anytime I have experienced your problem ( and I have more than once) I have done a wipe from recovery than chosen a known good rom from my card after that to get up and running. I always keep a "rock solid" rom on my card for this reason, such as xRom 1.5r4. - chris aka [email protected]
Also- I am a bit confused; are you doing this from the phone while at the recovery screen, or with adb from your pc. You can also take out your sd card, put it into a card reader, and do your re-naming, loading of a rom, etc., then put the card back into your phone-cc
Ok I been at this all day, I rooted my phone and read the guides all over the web, but no matter what I do I cant get the Rom to load. I dont want to be stuck using RC 29. Every time I try the update.zip I get
finding update package...
opening update package...
E: cant open /sdcard/update.zip
(no such file or directory)
Installation aborted
Press home+back to reboot
I dont get it, what am I doing wrong? I really didnt want to start a noob thread but Im stuck here. I tried 3 different roms but they all do the same thing. I really want to use Cyanogen with the dark theme.
__________________
Make sure your settings on your PC aren't such that you are inadvertently naming the files update.zip.zip. In some instances, Windows will append the file name automatically. To check if this is the case, go into My Computer>Tools>Folder Options and see if "hide extensions for known folders" is checked or unchecked. If its checked, then you need only to rename the file to update and windows will automatically put the zip on it. Have you installed Cyanogen's 1.4 recovery image? This will allow you to not have to worry about this problem as it lets you flash any image with a .zip extension.
Wow That was It! Thank You!!!!!!!!!!!!1 My 8 hour headache is gone now!!!
phatmanxxl said:
Wow That was It! Thank You!!!!!!!!!!!!1 My 8 hour headache is gone now!!!
Click to expand...
Click to collapse
Glad to help! I still stand by my original recommendation of installing Cyanogen's latest recovery image (1.4 currently) if you haven't done so already.
If you check back on this thread, can you please edit the title to say [SOLVED] so everyone knows that the problem has been handled?
0. Make sure phone is hard-spl first
1. Make sure SD card is formatted with fat-32
2. rename the image file (ruu_signed.nbh) to rhodimg.nbh, then copy that to the ROOT OF THE MICRO SD CARD, Insert card into phone
3. Set your phone in bootloader (Hold the "volume down" and hold the power on button until you see the tri-color screen.
4. Then follow the on-screen instruction
5. (OPTIONAL) -after flash, make sure to hardreset (pull battery, insert battery then hold green and red PHONE buttons (send/end) and hold powerbutton) follow onscreen instruction.
thanks for the info
I've tried the above and somehow it won't work on my TP2, it stays at "Serial" text in the white box, I'm assuming it already went past the SD slot then? Checking for the image.
I have the Energy rom loaded on the SD card, named as explained in the first post in this topic, it is placed in the root of the SD card, no folders or other files exist on that card. I removed the SIM card from the phone just to be sure. Is there anything I am missing, or is there anyone else who actually used this method to flash his or her device?
Info:
SPL: OliNex 0.85
ROM: |RHOD|6.5|ROM|WWE| ★ EnergyROM "Warhawk" (23016) ★ | Built Aug 21 |Manila 2.5 / 2.1|
SD Card: 4GB MicroSDHC (No brand on card, supplied with the branded T-Mo TP2 (Vario V)
Formatted: fat-32
Thanks
The nbh file needs to be in capital letters! RHODIMG.nbh
And step 5 isnt to be done until the "Tap screen to set up device" screen!
Just reset when your phone says Update successful!
And done, name changed to the correct format. No luck. Reformatting the card now to see if that changes anything. Update in a few.
And that too didn't work sadly. Either someone here notices I'm doing something wrong, or I'll just wait till I get near a machine natively running Windows Running Mac OS here so can't run the executable, and read that it's not quite a good idea to flash it from a virtual OS.
PositiveCreep said:
And done, name changed to the correct format. No luck. Reformatting the card now to see if that changes anything. Update in a few.
And that too didn't work sadly. Either someone here notices I'm doing something wrong, or I'll just wait till I get near a machine natively running Windows Running Mac OS here so can't run the executable, and read that it's not quite a good idea to flash it from a virtual OS.
Click to expand...
Click to collapse
You will want to partition your card so the nbh image is in a partion of at the largest 1G, anything larger makes it hard for the phone to find and read the nbh file! I have a 1G card just for flashing and it works perfect! And it also may be the mac, they never play nice with windows!
It's not the mac screwing it up in this case as I am using a virtual Windows OS to work on the card. (MacOS leaves some folders on the card that I don't want on it)
Will try partitioning the card, cheers. I'll update when I know more. ANd thanks for the help ^_^
Update:
Partioned the MicroSD card to 0.5GB, no change sadly.
thanks for information
Ok, SD update worked now, however, step 5 won't go (Oh crap...) Have the grey screen with "Update Complete" and "UPDATE SUCCESS" However, it won't do anything if I hold down Send/End/Power at the same time for over 10 seconds. How long should that take normally? What's my best option right now? Can't see any other than to unplug the phone and take out the battary, however, will this brick it?
PositiveCreep said:
Ok, SD update worked now, however, step 5 won't go (Oh crap...) Have the grey screen with "Update Complete" and "UPDATE SUCCESS" However, it won't do anything if I hold down Send/End/Power at the same time for over 10 seconds. How long should that take normally? What's my best option right now? Can't see any other than to unplug the phone and take out the battary, however, will this brick it?
Click to expand...
Click to collapse
When is says "UPDATE SUCCESS", just rest with the stylus.
Dave
Thanks for the swift reply! Done it, it's booting up as I am typing this. Didn't quite have the guts to just do that without having read I could when flashing from SD. (Was unsure how the device would react to soft reset then a first booth with the SD present etc)
Anyways, rambling. Thanks!
these post are telling me how to flash while the rom is already on the phone, but i'm missing the step on how to get the rom file on the phone in order to move it to the sd card.......... how do i get the file to the phone? do i put it onto the phone from the computer or do i go to my browser on my phone and download it from there to the phone
htctpII said:
these post are telling me how to flash while the rom is already on the phone, but i'm missing the step on how to get the rom file on the phone in order to move it to the sd card.......... how do i get the file to the phone? do i put it onto the phone from the computer or do i go to my browser on my phone and download it from there to the phone
Click to expand...
Click to collapse
Everything you need to know is HERE. I really suggest you fully read the instructions so you avoid bricking your phone by mistake.
In re: making sure you're hardspl'd first, does that still apply if you're flashing an official ROM? Or just for user cooked ROMs?
I'm about to update my Verizon TP2 with the newly released official 6.5 from verizon. I'm not hard spl'd, and honestly, know very little about that particular modification.
not for official
I dont think you have to be hard SPL'd for an official ROM. I think everything is included in the ROM package. (at least for T-Mobile it is)
btw the .nbh does not have to be named in all capitals. I have personally done it both ways with no problems at all. RHODIMG.nbh works just as well as rhodimg.nbh
kwambewright said:
I dont think you have to be hard SPL'd for an official ROM. I think everything is included in the ROM package. (at least for T-Mobile it is)
Click to expand...
Click to collapse
Thanks for the quick response!
Sadly, the way the install file is set up to work, I can't get to the nbh file. It insists on installing that via an active sync connection. I was hoping it would extract from the exe and schedule it for active sync installation, then I could hunt down the ROM, copy it to my SD card, and run it from there.
fortunz said:
Thanks for the quick response!
Sadly, the way the install file is set up to work, I can't get to the nbh file. It insists on installing that via an active sync connection. I was hoping it would extract from the exe and schedule it for active sync installation, then I could hunt down the ROM, copy it to my SD card, and run it from there.
Click to expand...
Click to collapse
hmm.. sorry for kicking this post, but you can unpack the exe-file with winrar. just grab the biggest file you can find (RUU_signed.nbh, and rename it to rhodimg.nbh), copy it to your root-folder (fast way for accessing bootloader is to also copy the "EnterBootLoader.exe" -file to your SD-card, and to start that file after copying both the files). Now just enter the bootloader, and it works! (don't be scared when the screen goes black for a moment, and the bootloader has reloaded. It's meant to do that )
I still have a little question by the way: is it possible to flash the hardSPL this way? or should i rename it to something else?
No, Hard SPL needs to be done from the PC as it checks IMEI online and IP address. You only get 1 licence, can ask for more or purchase more licences, but it can't be done any other way...
ultramag69 said:
No, Hard SPL needs to be done from the PC as it checks IMEI online and IP address. You only get 1 licence, can ask for more or purchase more licences, but it can't be done any other way...
Click to expand...
Click to collapse
Yeah, it's a pity this has been done (though I understand why...)
My device cannot connect to PC anymore, so cannot use HSPL anymore!
InjecTioN said:
hmm.. sorry for kicking this post, but you can unpack the exe-file with winrar. just grab the biggest file you can find (RUU_signed.nbh, and rename it to rhodimg.nbh), copy it to your root-folder (fast way for accessing bootloader is to also copy the "EnterBootLoader.exe" -file to your SD-card, and to start that file after copying both the files). Now just enter the bootloader, and it works! (don't be scared when the screen goes black for a moment, and the bootloader has reloaded. It's meant to do that )
Click to expand...
Click to collapse
Much obliged. I've actually been scared off the official vzw 6.5 because of issues upgraders have reported, but someday I'll put that to use.
Im sorry if i posted this in the wrong section; I have no clue where im suppose to post this ;\. Anyway, i followed this tutorial trying to jailbreak my g1 http://www.youtube.com/watch?v=xOo2V9qCauc. I downloaded the RC29(From the youtube tut) and put it into my sdcard and turned it off and on by holding the power and camera button. So i got to the part where it asked me to update my image but when i finished i got a update terminated msg instead of complete\successful. Then it kicked me to the colorful\rainbow screen with red green blue and white. I have no clue what i did wrong and no idea what im suppose to do now, can't turn off the phone or anything. Can somebody please help ;x! Thanks
I desperately wanted to post and say to say it failed bc you think your phone is an iphone (jailbreak). However, after reading your post i would say abandon a video and follow the root guide that is a sticky on here... look at the information thread above your post and look in there for the root guide.
When it says to get a recovery.img get cyans in the development thread. When it says get a rom, get cyans 4.0.2 stable cupcake... when you are all done i rec the community hero theme.
I typed all of that and this thread was right below yours
http://forum.xda-developers.com/showthread.php?t=548924
I believe jailbreak is another word for rooting @[email protected];
And i really want to know is how do i get outta this rainbow\color screen. Do i have to take out my battery? Want to make sure before i do so ;\
Snailrawring said:
I believe jailbreak is another word for rooting @[email protected];
And i really want to know is how do i get outta this rainbow\color screen. Do i have to take out my battery? Want to make sure before i do so ;\
Click to expand...
Click to collapse
That works, give it a try!
shaolinx said:
That works, give it a try!
Click to expand...
Click to collapse
What you mean that works?
Dang i took out the battery and turn the phone back on but i went back to the update image part >_>; . No matter which choice i choose i end up at the colorful screen....(Choices are either update or not)
is your rc-29 named DREAIMG.nbh exactly named that caps and all. also is your sdcard formatted to fat32.
Snail....
I went to bed last night thinking you were fine. Could you post exactly what steps you have done? If you press red (power) + menu + green (call) your phone will reboot (no need to pull the battery).
Did you remove (delete using your computer) the .nbh file when you put the image and update.zip file on your SD? Did you get the files from the site you visited for the video?
I strongly suggest following my first post.
Just like everyone else said, follow our guides instead of some video on youtube. Make sure your card is formatted to fat32 and try to update again. If that still doesn't work it might have been a bad download. So download DREAIMG.nbh (RC29) again. You can check the MD5sum to make sure its a good download and update again. And by the way jailbreaking ain't the same as rooting.
s15274n said:
Snail....
I went to bed last night thinking you were fine. Could you post exactly what steps you have done? If you press red (power) + menu + green (call) your phone will reboot (no need to pull the battery).
Did you remove (delete using your computer) the .nbh file when you put the image and update.zip file on your SD? Did you get the files from the site you visited for the video?
I strongly suggest following my first post.
Click to expand...
Click to collapse
These are the steps i've done
1.Copy and Paste all the files within my sd card to my pc.
2.Changed my sdcard into fat32
3.Dragged the dream.nbh or w\e that i got from the video tut into my sd card.
4.Turned off my phone by holding the power button.
5.On by holding power and camera.
6.Then i got to the update image part and pressed power to update, buy failed to update and now end up stuck at the color screen.
I've tried to reboot and everything but everytime i turn it back on it always goes back to the color screen T___T
Snailrawring said:
These are the steps i've done
1.Copy and Paste all the files within my sd card to my pc.
2.Changed my sdcard into fat32
3.Dragged the dream.nbh or w\e that i got from the video tut into my sd card.
4.Turned off my phone by holding the power button.
5.On by holding power and camera.
6.Then i got to the update image part and pressed power to update, buy failed to update and now end up stuck at the color screen.
I've tried to reboot and everything but everytime i turn it back on it always goes back to the color screen T___T
Click to expand...
Click to collapse
Have you redownloaded the DREAIMG.nbh file. It was prolly just a bad download. Happens all the time, thats why you wanna check the MD5sum.
your new best friend
as mentioned before sub in Cyans recovery image version 1.4 *you will thank me* and Cyans 4.0.2 rom *you will thank me*
supremeteam256 said:
Have you redownloaded the DREAIMG.nbh file. It was prolly just a bad download. Happens all the time, thats why you wanna check the MD5sum.
Click to expand...
Click to collapse
Yea i would love to do that too but im stuck at the color screen D:< how do i get outta there T___T
Snailrawring said:
Yea i would love to do that too but im stuck at the color screen D:< how do i get outta there T___T
Click to expand...
Click to collapse
Just pull the battery. Redownload DREAIMG.nbh put it on your sd card and try to update again. Get the file from this site now instead of youtube.
supremeteam256 said:
Just pull the battery. Redownload DREAIMG.nbh put it on your sd card and try to update again. Get the file from this site now instead of youtube.
Click to expand...
Click to collapse
Tried that when i take out my battery and turn it back on it goes back to the update image part and nothing happens when i plug in the usb
Oh and supreme do you have aim, msn or something? I hate this forum posting takes forever xD.
Snailrawring said:
Tried that when i take out my battery and turn it back on it goes back to the update image part and nothing happens when i plug in the usb
Oh and supreme do you have aim, msn or something? I hate this forum posting takes forever xD.
Click to expand...
Click to collapse
Yea I do its supremeteam256 on aim. I'm at work now so I can't do it on my computer and my phone signal might be hit or miss, but I'll still log on just deal with me if it shows me cuttin in and out. But what your going to have to do is either put the new DREAIMG.nbh on your sd card either by a card reader or another electronic device that you can transfer files over to the sd card. And the last option will be to mount your card using ADB and just push the file to your sd card. But as of right now it sounds like you can't access your phone because of the bad file. So once you get that file on your card then you would be able to boot holding camera + power and apply RC29. You'll be straight after that.
Yay got through with the image update part and now im stuck at the setup wizard part. Somehow my phone has problem with communicating with google servers when i type in my google account. And yes i don't have internet. I canceled it because i got this when it first came out and for the first 1-2months nothing worked on it such. None of the messengers work D:< so i had no use of internet so i end up cutting it xD.
Register w/o data plan
Uhh thanks but sorry im a newbie D:<. I did downloaded it from here
http://developer.android.com/sdk/download.html?v=android-sdk-windows-1.5_r3.zip
But when i try to open adb in the tool folder a command window pops out and disappear nothing happens ;\
Snailrawring said:
Uhh thanks but sorry im a newbie D:<. I did downloaded it from here
http://developer.android.com/sdk/download.html?v=android-sdk-windows-1.5_r3.zip
But when i try to open adb in the tool folder a command window pops out and disappear nothing happens ;\
Click to expand...
Click to collapse
You don't open it... it's utility
open command prompt (window key +R, type cmd) from there you can run adb commands (adb shell, adb pull, adb push or whatever else you need)
adb is your friend, learn how to use it. It will save you when your in trouble... trust me
Hello. I have a Tmobile G1, though its unlocked and I use it in other country.
I got it unrooted, installed cyanogen 6 then got bored of the speed and tried to go with lazlo. Dunno what I did but I got a total brick. no response. I took it to a technical service and they managed to get it to turn on, but now I cant do anything else.
This is what I get so far
Turning it on ->shows T mobile, then blank
Power+Home ->blank
Power+Camera ->Red green blue white screen
It says
DREA100 PVT 32B
HBOOT- 0.95.0000
CPLD-4
RADIO - 2.22.19.26I
Sep 2 2008
Serial IO
I was told to try to install the RC29 DREAIMG.nbh trough a FAT32 formatted card
and I get
Checking...
00028002
not allow
I don't know what else to try, can anyone lend a hand?
EDIT
also, I have a nandroid backup, but no way of restoring it, maybe that helps?
i faced the same problem last month...
1st, wipe ur sd card, rename it to sdcard and format it....
then download a good version of the dreaimg.nbh file...
http://www.4shared.com/file/etbtDlz2/DREAIMGnbh.html
it is a 46 mb file, u have to extract it on ur pc, then copy the file and keep it on ur phone's sd card...not in any folder, mind you.
then turn on ur phone via camera+power...
phone will get the file, and will flash the .nbh file.
also, make it sure that u have enough power in ur battery...
takes about 15 mins only.
i went to my stock android(1.0) as a result, then rooted again and now am on 2.3.2...
hope this helps
let me explain step by step....
sdcard-fat 32 format....yes....
then download the dreaimg.nbh file from the link, extract the zip on ur pc, then copy the extracted dreaimg.nbh(almost 85-90mb file) to the root of ur sdcard, dont rename, nothing at all...
after that, put ur sdcard in the phone, turn the phone on via camera+power, into the hboot screen, phone will find the dreaimg.nbh file and then it'll ask u to start update....press the action button, and u r good to go...takes about 10 mins to finish the process... and if u r still rooted, flash any rom as per ur requirements.
-I did a low level format on my card (2gb kingston)
-format in fat32
-download the file, copy in root
-started with cam+power
Same issue, got the 00028002 error.
maybe I need to format the thing in some other way?
Thanks!
u zipped the file and then kept the .nbh file in ur sd card's root? also u renamed ur "sdcard"???
try once more, in ur sdcard keep the zip file and the .nbh image also. then try. hope it works out this once.
good luck!!!
after downloading the file, u extracted the zip?
after extraction, copy whatever is extracted into your sdcard.
luck!!!!
yes, extracted the DREAIMG.nbh to the root. Nothing else in the sdcard.
SDcard is formatted and named "sdcard"
Still 00028002 error.
www.4shared.com/file/9izdCbvo/DREAIMG.html
Yup, thats the one I used
your phone is us or uk model???
u tried both the links i gave???
nothing yet?
well,there has to be a plan B somewhere
ok i don't have the answer for you but i remember trying to help someone about a month or 2 ago with the same issue and he got it fixed some how... think some to do with orange.nbh file or something.. i forget but try to search the Q&A section of G1 forum for the same issue... you'll find it eventually hope this helps..
Its marked TMOBILE, so Im gonna guess its US model.
Im wondering if its the sd card, if its getting rejected for some reason.
I read about the goldcard, but since its bricked I cant get the CID.
maybe from my nandroid backup?
IDRIFTA: yeah, I tried that one as well Im not sure where to keep going, now.
my phone too says t-mobile but it's germany i guess u should try hanging ur sdcard and repeat the process all over,starting with formatting!!!
and heck out for other dreaimg.nbh's as well...
will try searching tomorrow..
Most likely your phone is from Singapore ... There should be a thread here in this form (I think it started around May 2009) about rooting such a phone. Not sure if it will help you, but you can probably find some links which might help you.
Sent from my Gingerbread on Dream using XDA App
Will look for the corresponding dreaimg.nbh for singapore then, thanks!
edit:
tried rc29 and rc7, to the same error. Is there any other version I should be trying?
Thanks
edit2:
I have seen many posts with the same error mentioning the goldcard, is it possible to make one with my nandroid backup?
Bumping, just in case someone that can help me sees the thread. I know its not good forum manners, but I could really use some help.