Database Develop

Upgrading SPL failure

Hiya ppl,
I recentlly rooted my phone and wanted to use teh JACxHERO ROM om my phone so I download the radio 2.22...... and the SPL.
According to the guides you need to do Radio first (update.zip) then SPL (spl_signed.zip). Then do a wipe and load your ROM.
The radio updated fine but when I do the SPL upgrade it is stuck at the G1 T-Mobile screen, or return to the recovery screen.
No matter I tried wiping and updating ROM again with JACxHERO again. Still same issue.
Put back my nandroid backup and other ROM is back. I also noticed that after the wipe all my data is still there nothing changed.
My question:
The radio is up to date. Should I:
wipe
SPL
wipe
ROM
wipe
????????
Thanks in advance

What recovery image are you using, Cyanogens? Is the SPL actually the new one? Hold camera and power when the phone is off and you should come to a white screen with skateboarding androids (if nyou come to a rainbow coloured screen, it didn't work)

YuYe said:
Hiya ppl,
I recentlly rooted my phone and wanted to use teh JACxHERO ROM om my phone so I download the radio 2.22...... and the SPL.
According to the guides you need to do Radio first (update.zip) then SPL (spl_signed.zip). Then do a wipe and load your ROM.
The radio updated fine but when I do the SPL upgrade it is stuck at the G1 T-Mobile screen, or return to the recovery screen.
No matter I tried wiping and updating ROM again with JACxHERO again. Still same issue.
Put back my nandroid backup and other ROM is back. I also noticed that after the wipe all my data is still there nothing changed.
My question:
The radio is up to date. Should I:
wipe
SPL
wipe
ROM
wipe
????????
Thanks in advance
Click to expand...
Click to collapse
Boot into the SPL and make sure it updated (Power + Camera button)
The SPL should be 1.33.2005
If not the SPL did not update correctly (If your using Cyan's recovery, do the SPL upgrade, but reboot pressing Home + Power instead of using the trackball)
If it is 1.33.2005, then try flashing another Hero ROM and seeing if it works
Also, make sure your SD card is clean (wipe your ext partition, you do have one right? )

one of the guides on here says that after you've flashed the new spl, you will get stuck on the g1 loading screen and you need to reflash with the rom you were originally running, let it reboot back into that rom, then try and flash jachero
eg
if you were originally running a cyanogen rom
flash radio
flash spl (then reboot and you will be stuck at the g1 screen)
reflash cyanogen (let it reboot completely)
then flash the jachero rom
that's what i did and it worked for me

I have the Cyanogen recovery 1.4 i Believe (latest and greatest)
OK really wierd indeed i see the android staking funny
This is what is says:
DREAM PVT 32B ENG S-OFF
HBOOT-1.33.2005 (DREA11000)
RADIO-2.22.19.261
APR 20 2009, 15:30:43
HBOOT
<BACK> Fastboot Mode
I enabled fastboot now as well.
Jet when I flas the JACxHERO ROM it is loopt at G1 screen or turn back to recovery.
**Just download all zip's will do it now.

Make sure you have the correct partitions.

So no ROMs will flash?!

I know I have the correct partitions:
ext3 500MB
FAT32 1400 MB
linux-swap 32MB
I can flash others but I want HERO
Its Flashing right now brb with answer

LOL it hangs at the HERO logo

YuYe said:
I know I have the correct partitions:
ext3 500MB
FAT32 1400 MB
linux-swap 32MB
I can flash others but I want HERO
Its Flashing right now brb with answer
Click to expand...
Click to collapse
fat32>ext3>swap
you got the orders wrong.....

yeah I truned it around

Ok nice it worked thanks for clarying for me.
Only one thing, it is running slow. is it because of build ? or because my mem setting are incorrect ?

YuYe said:
Ok nice it worked thanks for clarying for me.
Only one thing, it is running slow. is it because of build ? or because my mem setting are incorrect ?
Click to expand...
Click to collapse
Welcome to Hero builds... they're all going to be slow compared to the Cupcake-based builds, though a lot of tweaking can help somewhat.

Also you have a class 4, a class 6 will help some more.

ok thnQ for the tip
And also my bat was running empty, charged my bat and worked a lot faster.

G1 Help

So I am stuck and not really sure what do to. I was trying to update to another ROM, not really sure what happend but now my g1 is stuck in a boot loop.
I can get to the fast boot menu and also to the recovery menu to load update.zip's. I have tried to reload the root RC but when I rename and load to SDCard Ii get something about not able to verifiy the file.
Could some one Please help to get me back on track.
Side note i was trying to load this:
http://htcpedia.com/forum/showthread.php?p=18084

So i have the RC back on my phone, but would still like to install the ROM i posted in the above URL.
In the above post this is what is listed for needs:
SPL 1.33.2005 (Called Haykuro SPL)
Does any one have a link to a Guide that will show how to correctly unstall this SPL? As i under stand it, installing this SPL is very dangeris and will brick your phone easy if done incorrectly.
An ext2/3-partition for the apps
I am pretty sure that i have this set up correctly, I should be able to just go to a prompt and type in print to see the partionts on my SD Card.
Any help or comments would be great!

Boot loop after flashing a different rom is usually caused by your ext partition. You should wipe the partition when you change ROMs. You can backup the apps on the ext partition to the fat32 partition, wip ext, then restore the apps.
Use the script in post 3 HERE
As for the DangerSPL... I wouldn't recommend it unless you want to try a hero ROM. If you still want to install it then make sure you flash the proper radio first, even if you already have the radio, flash it again anyways. Both can be found HERE

The Unlockr.com One-click root problem

Went to root with his one-click method instead of the usual way and i'm running into a problem.
I first had to downgrade to rc29, then update to cupcake. No problems. Then I had to put his flashrec.apk and Amon on my phone. Did that no problems. I used flashrec-1.1.3-20091107-2.apk from his link and also Amon 1.5.2. It seemed like all that went fine. I checked my radio and it was 2.22.19.26I so that's fine. But I wanted to upgrade to dangerspl.
I got dangerspl, put it on my card, renamed to update and booted up into recovery. Did a wipe, and applied update, did a reboot and it's getting stuck at the g1 splash screen. I pulled the battery and can boot back up into recovery or fastboot.
I also tried to do a nanbackup and it's giving me the error "error: Run nandroid-mobile.sh via console"
My options are a little different in recovery than his as well. I only have USB-MS toggle, backup/restore, flash zip from sdcard, wipe, partition sdcard, other Not sure where I went wrong, any ideas?

Sounds like you are all good, just don't have a rom flashed. The SPL probably wiped what you had. Download a rom and flash it like you have the other parts. Some roms take some extra effort. Cyanogen is a complicated mess so maybe you should try Super D or WG first. You will have to rename it to update.zip if you don't have the "flash any zip" option in recovery.

Yeah Danger SPL formats the NAND, so you everything is wiped including the ROM...

ah ...ok that explains it.
So basically, i'll take my card out, put it in the comp and i'll put super D 1.8 on it that way, rename to update and boot into recovery then flash it?
Should I partition for a2sd before or after I flash the rom?

If you have the latest Amon Ra Recovery then you dont have to rename it to update.zip but yeah thats basically it.
Dont know bout the A2sd though.

Thanks, i'm up and running. I partitioned before I flashed super D.
Last night I was freaking out, I thought I bricked my phone again Thanks for the help

lol thats happened to me so many times I almost had a heart attack haha.

Phone stuck at G1 Screen

Ok, I'm guessing I misunderstood something. I'm a "noob" so bear with me...
here's what I did.
I was running cm v 4.2.9.1 and decided to try and upgrade to the latest version. I wiped and reflashed and got 4.2.14.1 running, but I felt it was slow (the reason I didnt use any other new version), so I came here looking to see any new roms.
I decided KiNgxKxlicK AOSP 2.1 rom looked cool, so I downloaded it and flashed it (yes I wiped first). I'm guessing this is where it went wrong. The rom took 30 mins to finally boot to home (longest ever) but the sweet nexus screen made it easier to bear. I DID NOT do anything with an spl or any radio (that part still kinda confuses me to be honest). I'm guessing this is why I am in the predicament that I am.
The KiNgxKxlicK AOSP 2.1 rom loads fine, but was VERY slow. I decided I'd just go back to cm v 4.2.9.1. I went to wipe and reflash, but the G1 screen never disappeared. I let it load for about 30 minutes and decided that was a bit ridiculous before removing the battery (mind you, it never got past the T Mobile G1 screen). I was, however, able to reflash KiNgxKxlicK AOSP 2.1 rom and run it. This is all I am able to do. When trying to reflash cyonagen it just hangs on the G1 screen.
I'm a noob so I don't know what went wrong or what I missed.
Can someone PLEASE help me out here and tell me what I need to do to fix this. Thanks
Additional Notes:
Can't get to settings running KiNgxKxlicK AOSP 2.1 AT ALL, and a lot of programs Force Close on the rom.
Thanks for any help/input you guys can provide.
Thanks

Do you have Amon Ra recovery?

No I do not believe so, as I am not exactly sure what that is?
UPDATE: I should also note I checked my SPL and Radio, both were very old (as I realized I followed an OLD guide when I rooted my phone)
I upgraded to the latest radio and SPL and still have the same problem...except King's rom doesn't force close when I go to "settings".....thats about the only difference (still slow/laggy, lots of programs still FC)

When you boot into recovery (holding home+power) it should tell you what recovery image you are using. (i.e. mine says v1.5.2 down at the bottom of the screen) I ran into a similar issue when I attempted to jump between roms without taking all the appropriate steps; all I did was reformat my sd card, wipe the phone, and reflashed my rom and it worked great after that.

I tried reformatting my sd card, even re-partitioned it and I'm still having the same problems:
CM wont get past g1 screen after flash, King's rom still pretty slow....
What do you gys recommend I do next? This is getting really frustrating

1st: Check if youre Formatting is correct
2nd: Wipe EVERYTHING
3rd: Re-Format
4th: Try downloading the ROM again. It could be an issue with the ROM's
5th: Check you have proper radio and SPL (1.33.2005 and 26I)
6th: Pray
Try them all hope one of them works for you dude.

why is it that that 99% of newbs are on cyanogen

@Macrophage001
1. how do I CHECK my formatting to see if its correct?
2. Doesn't formatting do this automatically? I also "wiped" in recovery...
4. Not the roms, I have multiple CM roms, one of which I've had for some time with no problems and have re-flashed over and over
5. As stated above, I did not have the latest at first, i did upgrade to the latest radio and hakyuro(sp) spl to no avail.
@zachattack052
We've all been told it's THE BEST, much before even making the decision to root. I honestly thought CM was the only rom available, that's how much he's praised around here and other forums.....it's just what everyone tells us.

Here's what i suggest you do:
1> Download Amon_RA's recovery from here
here is a link to his thread
2> Transfer the file you just downloaded to the root of your sd
use this code to mount your sdcard from recovery console itself if needed
Code:
echo /dev/block/mmcblk0 > /sys/devices/platform/usb_mass_storage/lun0/file
3>Disconnect usb and reboot to recovery (keep home pressed while powering on) or just type
reboot recovery if you are already in recovery console
4> Flash Amon's recovery:
Code:
#mount -a
#flash_image recovery /sdcard/recovery-RA-dream-v1.5.2.img
when complete, reboot to recovery again
5>Partion your sd using amon's recovery (All data on SD will be lost so backup if needed)
[Alt+P] then [Alt+0] or scroll down using the trackball or the volume keys
follow the prompts, set your swap-size to 96 MB (use the vol keys) and 512 MB ext2. when done use the back button to go back and reboot
The above step will give you the partitions required to run any rom. Please make sure you meet the radio and SPL requirements before flashing a rom.
6>Transfer the latest CyanogenMod rom to your SD and flash it.
I would suggest that you try bbuchacher's SuperD rom (it requires Haykuro's Danger SPL)
make sure you flash the radio first and then the SPL if you dont already have it
P.S. When anyone says full wipe, they mean doing a factory reset, wiping your ext partition and wiping the dalvik-cache. These are the first 3 options in Amon_RA's recovery's wipe menu

what i would do....
make sure you flash the HTC recovery files first before you flash the CM rom
go for the defanged version of HTC
so...(once u have amon ra's latest recovery installed)
wipe everything
flash htc / defanged (DO NOT REBOOT!!!)
flash cm latest rom
ALLOW IT TO LOAD FULLY
reboot (personal preference)
create a nandroid backup for future **** ups
enjoy ur rom!!
j.

airmcnair06 said:
@Macrophage001
1. how do I CHECK my formatting to see if its correct?
2. Doesn't formatting do this automatically? I also "wiped" in recovery...
4. Not the roms, I have multiple CM roms, one of which I've had for some time with no problems and have re-flashed over and over
5. As stated above, I did not have the latest at first, i did upgrade to the latest radio and hakyuro(sp) spl to no avail.
@zachattack052
We've all been told it's THE BEST, much before even making the decision to root. I honestly thought CM was the only rom available, that's how much he's praised around here and other forums.....it's just what everyone tells us.
Click to expand...
Click to collapse
1: Go to recovery console and type parted. A list will show up with your fat32,ext2/3/4,linux-swap settings.
2: Yes it does but you can never be too sure.
4: ok

thanx guys I followed the instructions MrBurrito and cqms13 gave and am now running the Super D rom just fine.
Thanks again!

very quick question..
did you wipe dalvik-cache?

Firerat said:
very quick question..
did you wipe dalvik-cache?
Click to expand...
Click to collapse
After installing the RA recovery, yes. I was running CM Recovery though when I began this thread, which is why I was not able to wipe dalvik

Flashed myself into a corner...

So I was running OpenEclair v1.1.1, and since putting eclair on it, I've been unable to flash to any other rom. It goes through the wipe/install process, but when the device reboots I just get the rogers screen forever. I can then go back into recovery and re-flash OpenEclair to get it working again. I just got through all that hassle with rogers and made it out with my data and my root, so I was now attempting to fix this issue, and figured it couldn't hurt to upgrade my radio and try out amon ra's 1.5.2R image.
Unfortunately, I downgraded the SPL to 1.33.0009 right after trying to flash another ROM which didn't work, and performed the downgrade before I put a working ROM back on it (to use flashrec to get to amenra's), so at present I can only get into the SPL. My cyanogen1.4 recovery seems to be gone as I just get the original triangle ! logo (no menu or anything) when trying to start up in recovery mode.
Now what did I do, and how far back do I need to dig through tutorials to get back to a working rooted ROM? I'm not really sure what point I'm actually at, whether I still have root or not, or where to start.

Ninzoku said:
So I was running OpenEclair v1.1.1, and since putting eclair on it, I've been unable to flash to any other rom. It goes through the wipe/install process, but when the device reboots I just get the rogers screen forever. I can then go back into recovery and re-flash OpenEclair to get it working again. I just got through all that hassle with rogers and made it out with my data and my root, so I was now attempting to fix this issue, and figured it couldn't hurt to upgrade my radio and try out amon ra's 1.5.2R image.
Unfortunately, I downgraded the SPL to 1.33.0009 right after trying to flash another ROM which didn't work, and performed the downgrade before I put a working ROM back on it (to use flashrec to get to amenra's), so at present I can only get into the SPL. My cyanogen1.4 recovery seems to be gone as I just get the original triangle ! logo (no menu or anything) when trying to start up in recovery mode.
Now what did I do, and how far back do I need to dig through tutorials to get back to a working rooted ROM? I'm not really sure what point I'm actually at, whether I still have root or not, or where to start.
Click to expand...
Click to collapse
Have you got a fastboot mode you can boot into? At least then you could fastboot boot a (non-peristent) recovery image to let you then restore from a nandroid backup...assuming you have some good backups either on the phone or on a PC that can be copied to the phone.
I should note you haven't said what kind of phone you have (G1 or Magic) or really provided anything resembling a complete set of relevant information about your phone and its current state. So it's hard to help.....even if this was the right forum...and it isn't.

Try formatting or using a new memory card.

I'm using a rogers Dream, I have a 2gb SD card with 32MB linux swap and 500MB ext3
HAD 1.33.2005 SPL, 1.4 cyanogen recovery image.
Now I have 1.33.0090, can't get into recovery.
Trying to boot normally brings me to a rogers screen.
I CAN get into fastboot, can I put cyanogen's recovery back on?
Sorry if this is the wrong forum, where should I have posted?
Also, I don't know what information IS relevant to this, so please bear with my noobness.
Is there a recovery that will let me flash a ROM without changing the SPL back to 2005? Apparently if I can get the phone to boot up I should be able to use flashrec to upgrade the radio and SPL from the point I'm currently at.

Moved as not Android Development.

So I'm not sure what I did but the phone boots now...

Holy sh** it wasn't just me. I have this SAME problem. After flashing eclair and wiping and flashing another ROM it just stays at my splashscreen FOREVER. Even broke my nandroid, so I can't restore. How I fix mine everytime: Flash a rom OVER open eclair boot up... you'll probably get a sht load of force closes and all that but once you ge tto login screen just reboot into recovery and wipe and flash or nandroid restore then it should work.

If you guys are rogers, then you will most likely be ebi1, in which case, dont forget that you must also flash an ebi1 kernal to get past the boot screen.

So the phone booted into the original 1.5, I didnt realize the downgrade of my SPL flashed the ROM too. I put flashrec on and flashed Amen Ra's new recovery image and the rogers radio update, this is what I'm at now.
DREAM PVT 32B ENG S-OFF
HBOOT-1.33.2005 (DREA21000)
CPLD-4
Radio-3.22.26.17
Trying to flash to a custom rom again still fails. I've tried cyanogenmod, super D, and openEclair, it doesn't seem to matter. Where can I get an ebi1 kernel to flash?
E: looking at your signature, it seems I've got the right radio, I'll try using that port tool.

That did the trick! I followed the steps in your signature, flashed a rom, then flashed the ebi1 kernel and my phone booted like a dream. Pun intended.
Edit: So I'm back to only being able to run openeclair. Flashing cyanogen and then briancrook's ebi1 kernel still only gives me the rogers screen. I am however able to flash back to openEclair to get access to a working device again.
Edit: openEclair is running like garbage, it keeps completely locking up the device, I haven't even been able to log into my gmail account to get my contacts back.

Okay, I've managed to get the rom running smoothly by wiping everything, flashing the non-ramhack version of openEclair 1.2.2, then flashing the 1.2.2 ebi1 kernel. Unfortunately for some reason when I do get into eclair, I have no phone app, no settings, and no contacts app, even tho the contacts still work if i try to message someone. This is infuriating.