Hello guys, this is my situation.
I had a G1 whit android 1.1, these are the steps I did:
1) I install the new radio (latest version) (before, assured me that the phone in the booted mode say PVT)
2) I install the SPL haykuro's 1.33.2005
3) The phone is stuck on the T-Mobile G1 Screen, I remove the batery, put on again and update the CyanogenMod 3.6 rom.
4) The phone is stuck on the tmobile g1 screen again! ... I removed the battery, turn on the phone and stay stuck again.
5) I can enter in the booted mode and recovery mode but I do not know what to do.
which is what I do now?
Thanks for responding
pd:Sorry for the spelling, I do not speak English.
did u wipe before installing the rom?
pkrattu said:
did u wipe before installing the rom?
Click to expand...
Click to collapse
you are talking about a Hard Reset (alt+w) ? yes, I do it before and after, but the situation remains the same.
use power + camera and reflash dreaimg. your phone is only soft bricked so you can fix this. then after you reflash dreaimg regain root access and follow the flash procedures to image your phone to a non standard build.
Flash to JF ADP1.5 first, See if that works. Is your card partitioned?
why make him flash to a jf build first it's an unneeded step the reason i tell him to reflash rc29 or rc7 is cause it's easier to follow him right from the beginning to make sure he helped to the fullest extent once he regains root access as long as he flashes the 1st radio 2nd spl 3rd non standard build of his choice he's fine flashing a jf build does nothing except add a step that is not needed and makes it more confusing
I reflash to rc7 and can enter in the SO.
Well, I try again to update a rom, but first I make a backup.
Thanks guys !
well, the same problem again.
I install this time:
1) Rc29
2) recovery image + spl
3) JF 1.5 ADP
and the phone stuck in the G1 screen again.
I do not know what I'm doing wrong.
Just a wild stab, did you confirm that the SPL flashed correctly? You would know by booting into it (CAMERA+POWER).
If not, I would flash the radio again (just as a precaution plus its fast), flash the SPL then confirm it has been flashed successfully.
Then grab the JF 1.51 ROM, wipe then flash that.
Is it even possible to jump from RC29 right to 1.5? I would try to go JF 43 than to 1.5
I don't see why not as long as he has updated his radio before flashing JF 1.51. Far as I'm aware JF 1.51 doesn't require additional internal space (that Haykuro's SPL provides). The key is in the Radio before the big jump up in revision number.
If I'm wrong though, feel free to correct me, Its been a very long time since I started out rooting my G1
For history's sake I went from Stock RC8 > Modified RC7 (to root) > Modified RC8 > JF 1.3 > JF 1.51 > Dude 0.8 - 1.3RC2 > Cyanogen 3.5 - 3.5.4.1
ok try this reflash rc7 get root access install the recovery.img flash hard spl
let us know when you get to that point then we'll run some tests
Well, I could solve the problem. Thanks guys !!
I repeat the installation (downgrade, recovery, hardSPL, radio) but this time I install the Dude cupcake 1.2b full, and this time everything went well !
I guess that would make a mistake at any step of the installations. Surely.
But, I have a new problem. When I download any app from de Android Market, an error arises ... "insufficient storage available". (yes, I have space in the phone memory).
which is what I do?
I've rooted many G1s now and this is something I've never encountered.
I rooted this G1, it now has the "special" spl, cyanogens 1.4 recovery and the 26i radio but it wont take any rom past RC33. It hangs on the G1 screen everytime. I've even flashed it with my nandroid backups from other roms and same result. Am I forgetting something here?
So you load the rom and update it. Does it say its succesfull? Then it just hangs on the g1 screen. What rom's are you trying?
i had a problem similar to this.. my solution was formatting my ext2/3 partition then i was able to flash roms again hope this helps
It flashes successful but wont boot past g1 screen. Also I'm not running apps2sd. I've tried several roms, none of which require apps2sd.
so all you have is a fat32 partition? you have haykuros spl and htc radio, with 1.4 recovery. your on rc33. and you cant flash another rom?
since you have no ext3 partition make one first then post back your results.
steps:
wipe
make a ext3 partition
wipe again
repair file system
then flash.
wait for it to say done then rebot. if it boot loops, try going back to rc29 then root your fone, then insted of going from 29 to 33 go to cyans 3.9. with updated radio only no spl.
you can flash a rom then flash the radio it wont hurt your fone or rom.
with all the other answers up if none of those work, maybe you got a bad download. if the dev posts a md5 for their download check it.
Ok had done all the required reading (I thought!) and was running
Radio 1.22.12.29
HardSPL
Cannon v2
RA 1.62
PVT
wanted to install Danger SPL to try some other roms so needed to upgrade radio to 2.22.19.26
Put zip on SDcard
Home + Power
Applied zip
various message about extracting applying etc then Home +Back to reboot
RA come up again
only message is Formatting CACHE
Home + back
Now stuck on G1 Tmobile screen
any suggestions ?
I believe you have to now reinstall the ROM.
Technochris1 said:
I believe you have to now reinstall the ROM.
Click to expand...
Click to collapse
You are a star - thanks
(I thought the ROM would go on after DangerSPL!)
i have the same error, radio installation stalls at "Formatting CACHE:..." and does not move. installing the radio is the first step, only then i can install DangerSPL and the ROM.
so i am not sure where to go from here
Hi,
I tried flashing the brand new CyanogenMod 5 with Eclair for G1, and I seem to be in "serious" trouble now.
Before flashing:
I had already installed DangerSPL for a few months with no issue
Had the latest radio
Was happily running SuperD1.9.3 with WG Kernel and JIT enabled
Made a Nandroid backup just in case I wished to go back
Wiped Dalvik-cache and Data/Cache to avoid boot loops
All of this with Cyan's Recovery 1.4.
After flashing the ROM and the Gapps, my phone restarted and got stuck on the G1 screen (no boot screen) for, maybe 15 to 30 minutes, which seemed a bit long for me... I finally decided to remove the battery, went back to recovery and made a Nand restore.
But after the restore, rebooting had the same effect : stuck on G1 screen.
I tried flashing several custom roms with no luck (all stuck on G1 screen).
I finally decided to flash the official ADP1.6 ROM from HTC (signed-dream_devphone_userdebug-ota-14721.zip) which installed fine (and updated the radio by the way), and it finally booted on stock Donut.
I tried then to reinstall custom roms but get stuck on G1 screen everytime I try... and flashing Amon_RA's recovery won't work (i keep booting on the stock recovery). But as a workaround, I can use fastboot to boot into Amon_Ra's recovery.
The questions now are :
did I lose root access, thus preventing from installing custom ROMs ?
if so, is it possible to downgrade while being under DangerSPL ? Won't it brick the phone ?
Is there anybody else who had the same problem with upgrading to Cyan's 5 ?
I really need to get custom roms back, stock sucks on G1... but there is no way i can afford bricking my phone.
Thanks for help guys!!
As long you can get to your custom recovery menu, you still have root access.
Keep the Danger SPL, not worth changing it and the Danger SPL has fastboot also.
It takes a while to boot into a newly flashed ROM so just wait 5-15 min.
Do these steps:
1)Do a FULL WIPE of the phone (data, dalvik-cache, ext, battery stats, and rotation ****You won't have some of these options with Cyanogen's recovery. Just wipe what you can****)
2)Repair the ext partition
3)Flash CyanogenMod 5.0.7-DS-Test 1 (this is the g1/mt3g version)
4)Without wiping or rebooting, flash the gapps .zip file
5)Reboot and set up the ROM
6)Flash the latest Amon_RA recovery for your device. Cyanogen uses Amon-RA's recovery now.
1. Upgrade your recovery....cyanogen stopped working on his a while ago, upgrade to Amon_RA's recovery.
2. You only have to wipe data/dalvik, and maybe sd-ext. you do NOT have to wipe battery stats or rotation EVER.
3. Flash CM Rom
4. Flash gapps
Unfortunately, exact same thing.
Stuck on G1 screen.
Reverted back again to adp 1.6
Any other suggestions ?
alou2 said:
Unfortunately, exact same thing.
Stuck on G1 screen.
Reverted back again to adp 1.6
Any other suggestions ?
Click to expand...
Click to collapse
Give us your spl (hboot) and radio. Go into fastboot and type exactly what you see.
DREAM PVT 32B ENG S-OFF
HBOOT-1.33.2005 (DREA20000)
CPLD-4
RADIO-2.22.19.26I
Good ?
alou2 said:
DREAM PVT 32B ENG S-OFF
HBOOT-1.33.2005 (DREA20000)
CPLD-4
RADIO-2.22.19.26I
Good ?
Click to expand...
Click to collapse
Try upgrading your radio? You shouldn't HAVE to, but it might work.
Are you on Amon_RA's recovery now?
I'll try upgrading radio, but it's weird I can't switch back to other custom donut builds...
I've used Amon-RA's recovery to wipe and install the ROM this time.
For some odd reason though, it seems i can't "install" Amon_RA recovery (it seems to switch back to stock recovery), but just boot it through fastboot...
alou2 said:
DREAM PVT 32B ENG S-OFF
HBOOT-1.33.2005 (DREA20000)
CPLD-4
RADIO-2.22.19.26I
Good ?
Click to expand...
Click to collapse
make sure you're flashing the right recovery. dream still has two options. just like mytouch has H or G.
the one with "R" on the end of it is for rogers, one without it is for USA ones.
What files are you flashing? It sounds like you're flashing an old 1.6 base that has a recovery image included. Are you flashing the DRC83 Defanged as a base?
OK so I tried to take a fresh start on this.
I installed Amon_RA's 1.6.2 as recovery (not the Roger's one, I'm in France and the US tools always worked)
did a nandroid backup to stop reinstalling everything over again each time I want to make a phone call...
used it to repartition the SD (FAT / EXT2 / SWAP), thus formatting everything
wiped everything (except battery and orientation)
Flashed DRC83 Defranged
Without rebooting flashed CM5.0.7-t1
Without rebooting flashed Gapps
And it still gets stuck on the first boot screen (left it for about 20mn on it)...
Then I tried installing DRC83 defranged and it still gets stuck on the damned boot screen !!!
Through adb I can get to shell while on recovery, but the su command prints out :
/sbin/sh: su: not found
Is it normal ?
I can't find the /proc/last_kmsg file (just /proc/kmsg). Is there any log file that could help here ?
I'm going to nand back to stock 1.6, hoping it will start without having to flash the radio+recovery one again...
I noticed something weird when i nand back to my pre-CM5 WG-SuperD backup :
when it boots, it gets to the first boot screen and if USB is connected, i get a "fastboot usb" in a red box on top left of the screen.
To sum up :
phone's definitely not bricked, but won't run any custom rom anymore, but it still permits custom recovery installation/boot.
Something must have been broken/deleted somewhere.
Still asking the (dumb?) question : do I still have root, since su doesn't works (even using terminal server) ?
By the way, I really appreciate you guys taking time to read and answer my posts. Really
alou2 said:
OK so I tried to take a fresh start on this.
I installed Amon_RA's 1.6.2 as recovery (not the Roger's one, I'm in France and the US tools always worked)
did a nandroid backup to stop reinstalling everything over again each time I want to make a phone call...
used it to repartition the SD (FAT / EXT2 / SWAP), thus formatting everything
wiped everything (except battery and orientation)
Flashed DRC83 Defranged
Without rebooting flashed CM5.0.7-t1
Without rebooting flashed Gapps
And it still gets stuck on the first boot screen (left it for about 20mn on it)...
Then I tried installing DRC83 defranged and it still gets stuck on the damned boot screen !!!
Through adb I can get to shell while on recovery, but the su command prints out :
/sbin/sh: su: not found
Is it normal ?
I can't find the /proc/last_kmsg file (just /proc/kmsg). Is there any log file that could help here ?
I'm going to nand back to stock 1.6, hoping it will start without having to flash the radio+recovery one again...
I noticed something weird when i nand back to my pre-CM5 WG-SuperD backup :
when it boots, it gets to the first boot screen and if USB is connected, i get a "fastboot usb" in a red box on top left of the screen.
To sum up :
phone's definitely not bricked, but won't run any custom rom anymore, but it still permits custom recovery installation/boot.
Something must have been broken/deleted somewhere.
Still asking the (dumb?) question : do I still have root, since su doesn't works (even using terminal server) ?
By the way, I really appreciate you guys taking time to read and answer my posts. Really
Click to expand...
Click to collapse
I run into the same issue, I was upgrading from the latest cm 1.6 and after trying a few different things, after wiping with alt+w, I reinstalled danger-spl then installed the cm update, then the google apps; after doing this, it worked fine. BTW, it took about 15 mins to boot up though.
alou2 said:
OK so I tried to take a fresh start on this.
I installed Amon_RA's 1.6.2 as recovery (not the Roger's one, I'm in France and the US tools always worked)
did a nandroid backup to stop reinstalling everything over again each time I want to make a phone call...
used it to repartition the SD (FAT / EXT2 / SWAP), thus formatting everything
wiped everything (except battery and orientation)
Flashed DRC83 Defranged
Without rebooting flashed CM5.0.7-t1
Without rebooting flashed Gapps
Click to expand...
Click to collapse
There is your problem. DO NOT FLASH THE DRC83 BASE!!!
Just repartition your sdcard (if you want to), upgrade to ext3 or ext4, then follow the last 2 steps.
Hi UberMario,
I just reinstalled DangerSPL using Amon_ra's recovery, and then directly flashed CM5 + Gapps (no reboot inbetween).
It's been stuck on the 1st splash screen for 30 minutes now...
I'm letting it for another 30mn (although I think it's useless) and will eventually revert back to stock 1.6... again...
I just don't get what's wrong...
I'm going to try redownloading the archives in case they would've been corrupted, but being unable to install anything else than an official htc firmware seems like a symptom to me... isn't it ?
alou2 said:
Hi UberMario,
I just reinstalled DangerSPL using Amon_ra's recovery, and then directly flashed CM5 + Gapps (no reboot inbetween).
It's been stuck on the 1st splash screen for 30 minutes now...
I'm letting it for another 30mn (although I think it's useless) and will eventually revert back to stock 1.6... again...
I just don't get what's wrong...
I'm going to try redownloading the archives in case they would've been corrupted, but being unable to install anything else than an official htc firmware seems like a symptom to me... isn't it ?
Click to expand...
Click to collapse
I'm not sure if this will make a difference, but flash Gapps first then flash CM5 then reboot and everything should work...
or
You might want to check and make sure your MD5 is correct too..
why would you flash gapps first? you have to flash it on top of cm5.
Yeah... quite sure this won't help.
What could prevent the phone from booting custom firmwares but still allowing to install them ? (and finally I can still run the su command through adb, and get root access, but apps can't get root...)
tehseano said:
why would you flash gapps first? you have to flash it on top of cm5.
Click to expand...
Click to collapse
I rooted my G1 for the first time. I flashed CM 5.0.7 then GApps (no reboot in between). When the phone booted, none of the Google Apps were on the phone. Went back to recovery and did a wipe and flashed GApps then CM (no reboot) and everything installed correctly. Someone said to flash CM first then GApps, but that didn't work for me. Weird.
http://forum.xda-developers.com/showthread.php?t=625886
I tried to install this rom but it didnt work i was stuck at the boot screen for 6 hours ( I went to bed) it starts to load up but the pear logo doesnt stop spining,
HELP
http://forum.xda-developers.com/showthread.php?t=625886http://forum.xda-developers.com/showthread.php?t=625886
Click to expand...
Click to collapse
This is not a ROM, it's SPL and radio for you G1.
It's [HOW-TO] Haykuro SPL, Danger SPL, Death SPL FOR DREAM/G1
ROM and SPL/radio is not the same.
And did you already ROOT your G1?
Yea i have rooted it
http://forum.xda-developers.com/showthread.php?t=746667 sorry
do you have sd card set-up properly? try using ext4, also make sure you wipe data, cache, and system... than repair ext