Help please - XPERIA X1 ROM Development

I 've installed Rom Update from Christian but i don't like it.
Already found and downloaded an original X1 rom (Dutch) but it's an image file that my installed programms can't handle.
Please can anybody tel me how to get on now.
Thanks a lot

bukkie said:
I 've installed Rom Update from Christian but i don't like it.
Already found and downloaded an original X1 rom (Dutch) but it's an image file that my installed programms can't handle.
Please can anybody tel me how to get on now.
Thanks a lot
Click to expand...
Click to collapse
Rename *.image to *.nbh and the update utilities can handle the file....

bukkie said:
I 've installed Rom Update from Christian but i don't like it.
Already found and downloaded an original X1 rom (Dutch) but it's an image file that my installed programms can't handle.
Please can anybody tel me how to get on now.
Thanks a lot
Click to expand...
Click to collapse
Use the program "Undisker". It extract the ISO file.

Related

Looking For IntelliDialer for a Qtek 9090/XDA3...

Hi guys
I was wondering if there is a version of intellidialler for the Qtek9090...Or a similar program...If yes, please send me the link via pm or email...or even the prog via email.
[email protected]
thank you very much...
banani
Cabs are here:
ftp://xda:[email protected]/Magician/Extended-roms/Qtek%20s100%20WWE%201.06.115%20(sweden%20Dangaard)%20Extended_ROM/
Instructions for setting it up, here:
http://forum.xda-developers.com/viewtopic.php?p=93601
basically you'll need to rename some files in your windows folder to be able to install the cab.
the ftp adress doesn't seem to work on my mac...says something about an error...
Ok, click on this link (this time it will work):
ftp://xda:[email protected]/Magician/Extended-roms/
And then go to folder called like this:
"Qtek s100 WWE 1.06.115 (sweden Dangaard) Extended_ROM"
Cabs are there.
I tried with just installing the cab files smartdialing_WWE_RC11.cab and IntelliPad_WWE_B10.cab...the prog works fine...only thing, when I softreset the device theres 997:146:10 as a system message then I click on ok and it's gone and everything works...
pof said:
Ok, click on this link (this time it will work):
ftp://xda:[email protected]/Magician/Extended-roms/
And then go to folder called like this:
"Qtek s100 WWE 1.06.115 (sweden Dangaard) Extended_ROM"
Cabs are there.
Click to expand...
Click to collapse
PLEASE KINDLY ASSIST. Idownload these 2 cab files ie
PhonePad magician generic WWE RC12
Smart Dialling magician generic WWE RC13
I placed these 2 files in My Documents and execute them...it didnot work
I then tried to placed it in Windows and execute them..still didnot work
Can someone please assist how to get this intellidialler to work on my Blue angel(xda2s) thanks
could someone pls repost??
thx
the ftp server is giving an eror massege? can you pls send
pof said:
Ok, click on this link (this time it will work):
ftp://xda:[email protected]/Magician/Extended-roms/
And then go to folder called like this:
"Qtek s100 WWE 1.06.115 (sweden Dangaard) Extended_ROM"
Cabs are there.
Click to expand...
Click to collapse
can you pls send a link that works,this one is giving an eror masg
the link is work......

GPS ROM Upgd. WithOUT language change??

I downloaded a few days ago a GPS enabled Radio ROM. I suppose it should be able to upgrade to GPS ROM just by changing the RADIO ROM.
Could it be done with the OFFICIAL Dopod ROM now available?
Would it work just by removing the non-RADIO files from the temp directory?
My goal is to KEEP my Trinity language unchanged, just enable the GPS functionality.
Any help is appreciated.
C'mon guys! No one there to answer....?
Yeah, have kind of like the same question... I've seen many update threads, but this is a very populare topic, so the threads are a bit hard to go through if you havn't followed them from day one...
so, question is as follows:
How to upgrade a Trinity and enabling the GPS without loosing your existing OS/language... A step by step guide for dummies like me would be _very_ helpfull, or just point me to the thread with the solution, that would also do the trick
@neofix: That is exactly what I am looking for, too. I would like to have the official dopod ROM update with all the features like GPS and so on but I would like to have my own language on the phone. It is currently really difficult to keep track with all the posts regarding the gps ROM. I am lost, please somebody help me out of this.
Any chances? Anybody?
enlite_de said:
@neofix: That is exactly what I am looking for, too. I would like to have the official dopod ROM update with all the features like GPS and so on but I would like to have my own language on the phone. It is currently really difficult to keep track with all the posts regarding the gps ROM. I am lost, please somebody help me out of this.
Any chances? Anybody?
Click to expand...
Click to collapse
If you have your .cab with your default language (it is before the dopod update in the extended_rom) maybe i can help you.
I did upgrade from my german ROM to the dopod one already but i want to have the GPS in a german Rom. is that possible?
enlite_de said:
I did upgrade from my german ROM to the dopod one already but i want to have the GPS in a german Rom. is that possible?
Click to expand...
Click to collapse
I say up i nead the cabs in the extended_rom before the update.
To do something.
If you whant you can download the german rom and flash it in your trinity and after speak to me to tell you what.....
After will take the interesting think you can flash again the gps dopod rom.
EDIT: IF THE ROM IS BY DEFAULT GERMAN I CANT DO ANYTHING. BUT IF IS IN ENG AND AFTER THE FLASH ADD THE LANGUAGE MAYBE I CAN HELP YOU.
flashed it just now and found the following files in the EXTROM pp_defaultpage_wwe.cab, pp_extversion.cab, MP_CVSDcpl_20060920.cab and a textfile named config.
It did not ask me to change my language or anything like that
enlite_de said:
flashed it just now and found the following files in the EXTROM pp_defaultpage_wwe.cab, pp_extversion.cab, MP_CVSDcpl_20060920.cab and a textfile named config.
It did not ask me to change my language or anything like that
Click to expand...
Click to collapse
So your lang is default with out any cab install after the flash.
You can't do anything.
Nonono there must be a way. There must be any kind of file or data which tells the device to write "Kontakte" instead of "Contacts". Maybe we have to change it manually.
Does anybody know something about such a file, such data on the phone?
enlite_de said:
Nonono there must be a way. There must be any kind of file or data which tells the device to write "Kontakte" instead of "Contacts". Maybe we have to change it manually.
Does anybody know something about such a file, such data on the phone?
Click to expand...
Click to collapse
Look the translate is mui's files in the windows folder.
The mui file has the translated word's of the original dll's or exe's.
If your original dll's or exe's in the windows folder is german,
how you can take it out and after the dopod update add buck in the windows folder??.
You can't cause rom permision's.
If you whant you can find another away maybe a program to translate the win ce to your language.
search for that.
ausdim said:
If you have your .cab with your default language (it is before the dopod update in the extended_rom) maybe i can help you.
Click to expand...
Click to collapse
I have the cabs in my ext-rom, since I did not update yet.
May I pm them to you?
Or I would post them in the ftp, should it work.
Let me know.
Regards.
A better solution could be to let the original ROM installed and flash only the Radio ROM from the GPS enabled DOPOD ROM.
I do not know if this will work and if the original ROM "know" how to communicate with the GPS radio version - perhaps POF can give us the answer.
If there is no risk to flash the differnet radio ROM i will try it soon.
To get the radio ROM (Info from POF):
Use NBHExtract to extract GSM.nb from full rom, then use NBHgen to make NBH with radio only. Flash using SSPL-Trin.
Gerhard
mdacfan said:
A better solution could be to let the original ROM installed and flash only the Radio ROM from the GPS enabled DOPOD ROM.
I do not know if this will work and if the original ROM "know" how to communicate with the GPS radio version - perhaps POF can give us the answer.
If there is no risk to flash the differnet radio ROM i will try it soon.
To get the radio ROM (Info from POF):
Use NBHExtract to extract GSM.nb from full rom, then use NBHgen to make NBH with radio only. Flash using SSPL-Trin.
Gerhard
Click to expand...
Click to collapse
Hi, flashing only the radio rom is not sufficient for the gps to work , we also need the driver in OS.nb
but from what i've read, for the moment it's not possible to edit the OS
Looking Glass said:
I have the cabs in my ext-rom, since I did not update yet.
May I pm them to you?
Or I would post them in the ftp, should it work.
Let me know.
Regards.
Click to expand...
Click to collapse
Hello please tell me what the name's of cab's???
Here they are.
ausdim said:
Hello please tell me what the name's of cab's???
Click to expand...
Click to collapse
It looks too simple to be the answer to our guesssings.....
Looking Glass said:
It looks too simple to be the answer to our guesssings.....
Click to expand...
Click to collapse
It is look so simple to tell me the name's of the cab's included in your extended_rom.
After chek the name's of your's cab's and see if a language cab is there,i ask you to send me the cab and i will do my trick.
So the simple think is to tell me the name's of your cab's.
???????is any language cab to extract the .mui files in \windows folder???????
That is what i whant to know.
<i dont think to say anywhere (i do something magic with the name's only)>.........
Hi friends,
This is an interesting tread....
I've found this link in PocketPT (portuguese forum) and it looks good!
-----> http://www.mylanguage.mobi/index.php?option=com_content&task=view&id=1
I Hope it helps....
I dont know how does it work, but lets investigate and try to make the same to our
languages!
ausdim said:
It is look so simple to tell me the name's of the cab's included in your extended_rom.
After chek the name's of your's cab's and see if a language cab is there,i ask you to send me the cab and i will do my trick.
So the simple think is to tell me the name's of your cab's.
???????is any language cab to extract the .mui files in \windows folder???????
That is what i whant to know.
<i dont think to say anywhere (i do something magic with the name's only)>.........
Click to expand...
Click to collapse
Sorry, I had problems uploading the picture with the Explorer listing of the files. My previous post should be updated now. Just a picture to show you the EXACT thing.
Reverse?
NOKIAS said:
Hi friends,
This is an interesting tread....
I've found this link in PocketPT (portuguese forum) and it looks good!
-----> http://www.mylanguage.mobi/index.php?option=com_content&task=view&id=1
I Hope it helps....
I dont know how does it work, but lets investigate and try to make the same to our
languages!
Click to expand...
Click to collapse
IMHO this is exactly THE OPPOSITE to what we a are looking for....
It says explicitly that NO ENGLISH ROMS are supported.... so no GPS ROM is supported either.
It might well be a way to investigate, but is not a solution now :-(

WM 6.1 |Skype problem

I can install it but it wont run. I get message "Skype cant start". Anybody with same problem ?
YES I HAVE THAT PROBLEM WITH KAISER
I INSTALLED SEVERAL VERSIONS OF SKYPE BUT NO ONE CAN RUN
I HAD THE SAME PROBLEM WITH HERMES TYTN BUT I FOUND A VERSION WICH WORK WITH VERSION 2.053 BETA
BUT WTH KAISER I M STILL SEARCHING THE RIGHT VERSION OR MAYBE ITS WITH NO ISSUE
PLZ INFORM ME IF ANY SOLUTION
THANKS
[email protected]
I was using HTC WM 6 and skype worked without a problem. After the upgrade to 6.1 it stoped working
I'm using DCS 1.4 WM6.1 and Skype is .. rather buggy on it.
I've used two WM6.1 Roms. One from Laurentus and one from Schaps and both have let me install, run and connect with no problems whatsoever. Hope this helps.
I have the same issue with offical Kaiser 6.1 german rom
Confirm as stated above, I am on L26 rom running Skype_2.1.0.65 It works great.
Hi
so anybody a dowbnload link for the "old" version that's working?
LG
Daniel
DanielS said:
Hi
so anybody a dowbnload link for the "old" version that's working?
LG
Daniel
Click to expand...
Click to collapse
Grab it from my site: www.frifor.com/download/Skype_2.1.0.65.CAB
Hi
Thanx for the .cab
Sadly with my Offical GER Rom this also doesn't work.
BR
Daniel
solution
i got it working on my german original ROM with WM6.1
install first the latest Skype_2.1.0.65.CAB and than install the Skype Version: 2.2.0.45 found here: http://tom.x-files.lv/Cabs/From_X-Files-Skype_for_Diamond.cab.
this double install is because the ver 2.2.0.45 does not have a shortcut install to programme.
it works perfectly for me.
Can anyone else confirm this works on an original uncooked rom? I've actually been thinking about going back to an original wwe htc rom lately because im getting terrible battery life with L26 v9, but i have to have skype, and i know they dont work with original builds.
newto said:
i got it working on my german original ROM with WM6.1
install first the latest Skype_2.1.0.65.CAB and than install the Skype Version: 2.2.0.45 found here: http://tom.x-files.lv/Cabs/From_X-Files-Skype_for_Diamond.cab.
this double install is because the ver 2.2.0.45 does not have a shortcut install to programme.
it works perfectly for me.
Click to expand...
Click to collapse
Hi
I seem to be to stupid. pls give me a detailed instructions how to do it. I don't manage it on my Offical German WM 6.1.
Thanx
Daniel
for me is working well skype ver 2.2.0.37
http://www.skype.com/go/getskype-pocketpc2003-cab
i am using my own cooked wm6.1
BR
DanielS said:
Hi
I seem to be to stupid. pls give me a detailed instructions how to do it. I don't manage it on my Offical German WM 6.1.
Thanx
Daniel
Click to expand...
Click to collapse
newto said:
i got it working on my german original ROM with WM6.1
install first the latest Skype_2.1.0.65.CAB and than install the Skype Version: 2.2.0.45 found here: http://tom.x-files.lv/Cabs/From_X-Files-Skype_for_Diamond.cab.
this double install is because the ver 2.2.0.45 does not have a shortcut install to programme.
it works perfectly for me.
Click to expand...
Click to collapse
I modify the CAB posted by newto to correct the link creation and file location installation. Now you need only install one CAB.
http://rapidshare.com/files/131579737/XDA-Skype_for_Diamond_JCEspi2005.cabbad CAB... sorry
Can someone test it and report back, please...
Cheers
Hi
I tried it and it' doesn't work.
"Couldn't find all files necessary to start Skype. Pls reinistall"
BR
Daniel
DanielS said:
Hi
I tried it and it' doesn't work.
"Couldn't find all files necessary to start Skype. Pls reinistall"
BR
Daniel
Click to expand...
Click to collapse
Thanks for the report... i'll try to correct it and post later...
Cheers
newto said:
i got it working on my german original ROM with WM6.1
install first the latest Skype_2.1.0.65.CAB and than install the Skype Version: 2.2.0.45 found here: http://tom.x-files.lv/Cabs/From_X-Files-Skype_for_Diamond.cab.
this double install is because the ver 2.2.0.45 does not have a shortcut install to programme.
it works perfectly for me.
Click to expand...
Click to collapse
Sorry, this method don't work for me on spanish official cooked ROM. Launching the Skype (after second CAB installed) deletes the DLL res file on Skype folder... strange...
This is why the CAB i modify don't work either.
I'll keep investigating... the original 2.2 CAB from Skype don't work on my ROM, but this was expected...
Hi
so you need a .dll when we konw which .dll and have it we can merge it in .cab file? right?
BR
Daniel
DanielS said:
Hi
so you need a .dll when we konw which .dll and have it we can merge it in .cab file? right?
BR
Daniel
Click to expand...
Click to collapse
no, sorry for the misunderstod... the DLL is in the second CAB, and is named SkypeRes200.dll, but after executing skype for the first time, the DLL disapear... strange.

How to install ROM with part 1,2,3 ?

Please help how to install ? I download all 3 parts . Do I have to install part 1 first and then install part 2 and 3 later
Thanks
cnguyen said:
Please help how to install ? I download all 3 parts . Do I have to install part 1 first and then install part 2 and 3 later
Thanks
Click to expand...
Click to collapse
umm i don't know what kind of a rom you are trying to flash but keep these things in mind:
a) no hardspl yet ... so very hard probability that you can brick your device.
b) roms come as a nbh file ... which is one file not multiple parts ...
c) well this is actually a question: what is the source of this rom??? can't be here as here every rom is a single nbh + customruu.exe
i would say refrain from flashing this particular rom but again its your device your choice
He probably downloaded the parts from http://forum.xda-developers.com/showthread.php?t=444170
Meaning he has multiple *.rar parts.
cnguyen I really think you should wait until you get a walkthrough.
Thanks everyone . I got HTC touch HD from asia Rom and I want to upgrade to WWE rom but not too sure which ROm is the right ROM so I download 3 files from Blackstone_Orange_UK_1.14.405.3 to my PC
11.Nov.08
http://rapidshare.com/files/16237350...Ship.part1.rar
http://rapidshare.com/files/16237926...Ship.part2.rar
http://rapidshare.com/files/16238323...Ship.part3.rar
please help me how to install it I'm new with mobile Window never done something like this before
Thanks
cnguyen said:
Thanks everyone . I got HTC touch HD from asia Rom and I want to upgrade to WWE rom but not too sure which ROm is the right ROM so I download 3 files from Blackstone_Orange_UK_1.14.405.3 to my PC
11.Nov.08
http://rapidshare.com/files/16237350...Ship.part1.rar
http://rapidshare.com/files/16237926...Ship.part2.rar
http://rapidshare.com/files/16238323...Ship.part3.rar
please help me how to install it I'm new with mobile Window never done something like this before
Thanks
Click to expand...
Click to collapse
If I have .rar files I use winrar nice little tool
http://www.freewaredown.com.cn/winrar.htm
the others should be able to tell you what to do with the contents
once extracted
My little child use could use winrar et similia do "unrar to.." on the file .part1.rar ^^'
D'rath
cnguyen said:
Thanks everyone . I got HTC touch HD from asia Rom and I want to upgrade to WWE rom but not too sure which ROm is the right ROM so I download 3 files from Blackstone_Orange_UK_1.14.405.3 to my PC
11.Nov.08
http://rapidshare.com/files/16237350...Ship.part1.rar
http://rapidshare.com/files/16237926...Ship.part2.rar
http://rapidshare.com/files/16238323...Ship.part3.rar
please help me how to install it I'm new with mobile Window never done something like this before
Thanks
Click to expand...
Click to collapse
Hi,
In my opinion you can't upgrade your HD with Orange ROM. There is no HardSPL yet !!. But if better upgrade by latest Asian WWE ROM.
Regs
cnguyen said:
Thanks everyone . I got HTC touch HD from asia Rom and I want to upgrade to WWE rom but not too sure which ROm is the right ROM so I download 3 files from Blackstone_Orange_UK_1.14.405.3 to my PC
11.Nov.08
http://rapidshare.com/files/16237350...Ship.part1.rar
http://rapidshare.com/files/16237926...Ship.part2.rar
http://rapidshare.com/files/16238323...Ship.part3.rar
please help me how to install it I'm new with mobile Window never done something like this before
Thanks
Click to expand...
Click to collapse
this is a RAR archive formed from 3 parts. you need to first unrar it using, obviously, winrar. double click the first archive and it will ask you to extract all the others.
once you have extracted all files, you will realize there are only two files, one of them being an .exe file. you should run the .exe file and it will guide you through the installation.
BUT, since your device, as all others, is CID, installation will not work, since at the beginning it will check for the Carrier ID and fail the installation, if it comes from a different carrier (GSM operator).
What you need to do is sit back and relax, wait and follow the thread here:
http://forum.xda-developers.com/showthread.php?t=431217
Once these guys have a solution for Hard-SPL, you will need to install first Hard-SPL and then your new ROM version, the one you just unrared.
PS. Just did a sum up of all the info posted above.

[ROM] [NLD] 1.14.172.1 dump

Hi Guys,
I have dumped the rom of my hd which i bought from vodafone Nl.
In order to keep your warranty you might want this
I've upload to rar files:
The baserom contains the 2 raw files used for creating the new nbh file.
the ruu_signed file is obvious.
total folder:
http://www.4shared.com/dir/12955836/cf2f88e2/NLD_ROM.html
seperate rar files
http://www.4shared.com/file/88907225/4af0fcb5/BaseROM.html
http://www.4shared.com/file/88909069/c471d6c7/ruu_signed.html
Thought i'd share it with all you guys
I don't know whether is it all works, haven't tested it...so if someone could tell me if it is working i would be gratefull.
rom version: 1.14.172.1 (24011) NLD
For questions or iff you miss files, please pm.
hey Twan,
Is this a rom with al the Vodafone 'stuff' ? The links & profiles for the GPRS/HSDPA configuration?
are the "vodafone stuff" not on your sim card?
Mine are!
I have an unbranded Blackstone, flashed it, and in the programs found an app that automaticly installed all the right vf stuff
do0fusz said:
are the "vodafone stuff" not on your sim card?
Mine are!
I have an unbranded Blackstone, flashed it, and in the programs found an app that automaticly installed all the right vf stuff
Click to expand...
Click to collapse
Thanks for the info! So it works properly? All the apps work? Like google maps for instance?
Hadn't tested it myself, but glad that it works Now i can install dutty with a security backup
Grtz Twanj
Hi,
My HTC Blackstone (branded vodafone) is'nt working anymore. Now I need de original rom and radio to get it repaired.
But the link is dead (i know it's an old treath) but can anyone help me?
Thanks!
baing said:
Hi,
My HTC Blackstone (branded vodafone) is'nt working anymore. Now I need de original rom and radio to get it repaired.
But the link is dead (i know it's an old treath) but can anyone help me?
Thanks!
Click to expand...
Click to collapse
Official link to the ROM-update at HTC website: link
Grtz,
Degake

Categories

Resources