Help. SD Card Damaged, G1 won't boot - G1 Q&A, Help & Troubleshooting

Title says it all. I unmounted as I should have before turning off USB storage, but when I unplugged the USB cable, it said I have a damaged SD card and that I may need to format it. I hit the OK to format and nothing happened. I tried rebooting and nothing happens. I'm rooted with CM 3.9.7 mod, A2SD, etc. I've tried flashing the recovery, etc, but it can't mount the SD card and so fails. Any help would be greatly appreciated. Thanks.
nspbass

You can go to Target and buy a Dane-elec 4GB for ten dollars.
It comes with a micro-sd usb card reader.
Probably in order to fix your situation you may need a micro sd usb card reader to reformat and repartition.
You can now do this through adb.
http://forum.xda-developers.com/showthread.php?t=534714
Clay

Just reformat it in a card reader.

reformat the card, wipe and reflash the ROM.

Related

Can't Format SD Card

I lost my sd card data flashing a rom. Could not mount it even thru recovery. Got a card reader, but it won't format it.
Using Mini Partition Tool to troubleshoot. I am not at a point where it shows three partitions. The main 16gb unallocated, logical. The ext3 unformatted 500mb, primary (think I did that by mistake when trying to recover partition). And a 32mb unallocated, logical. All zero used memory.
I need to get back to one partition allocated, primary. Then I can get sd data back on it and reformat thru recovery.
Again using Mini Partition Wizard
Any help please!
OK,
I got it repartitioned as primary and formatted, bu sd card from pc now.
Hope phone recognizes it.
Will update, if I need further help.
Ken
If you want a good program to format your sd card, try SD Formatter.
Download and install that, plug in your sdcard into your sd card reader and format it.
Choose Full Erase On (if possible) and Resize On. It will format your sdcard to factory default and that means even the ext partition will be gone too.
Well, all transferred. Still won't mount. Says can't mount either of the dev/blocks mmcb1k0p1 and mmcb1k0.
Staus bar says sd card damaged.
?????
musashiken,
Thanks, typing while you posted. Based on my last post should I still do that?
Ken
Yeah I think you should try to reformat again with the program I suggested, as that will full format your sd card.
Once done, put your sd card back to the phone and create ext partition in recovery.
At work now but will be working on it.
Thanks
Ken
musashiken,
Thanks, appreciate all your help
That program worked, and I am back up and running
Ken
Glad it worked for you. My sd card kept giving me problems and I have to use this every few rom flashes.
I have a similar problem. I installed a new 32 gb SDHC card in a CDMA Hero running Cryogenmod. All was working well for about 10 days, then I got an error that no SD card was found. I had the original card and tried to get to the Clockwork recovery, no luck. Finally, through Rom manager, (flash alternate recovery to Ramon, then back to Clockwork, I was able to boot into recovery.
I still cannot format the new SDHC card, through Recovery, Windows 7, or the Panasonic program listed above. The Windows format option sees the card as a FAT 121mb card, so does the above program. Is this new card toast? It came with a lifetime warranty from Kingston, but I am mad that it did not make 2 weeks.
Any help would be greatly appreciated.
Craig
If sdformatter did not work it may be bad.
I always had good luck with it.
Did you have all options set per instructions?

[Q] Micro SD Flashing method won't work

Hi all. I just got a new X1 a few days ago. Pretty happy to have it, however, I'm having chronic problems flashing a rom on it using the micro SD method. I have a PNY Micro SD card, and after hard spl-ling my phone, I put a rom on the micro SD card in the root, renamed it to KOVSIMG.nbh, powered the phone off. Removed the battery and micro SD, reinserted everything, and when I powered it back up, I got the tri-colored screen, then it said no image file. For some reason, this PNY card isn't being recognized by my computer, so I can't reformat it with my computer. Can somebody please either tell me how to format the card on my X1 or direct me to the most current and reliable USB method thread please. Thanks.
[A] Micro SD Flashing method won't work
Hi x1-pc7,
try this:
http://forum.xda-developers.com/showthread.php?t=787867
In Summary,
try to copy all your microsd contents somewhere else temporarily. e.g. your pc desk top
FORMAT you SD card as FAT or FAT32.
try the micro SD method.
sorry, i mis-read your post, you knew all that above...
To format your sd micro card, you would need a card reader to format your sd card.
card reader that handles the microsd, or put the micro sd into a sd card adapter, usually provided with the microsd card, and put this into a sd card reader.
Hope this helps!!
Have a Happy New Year!!
chinkyeyed09 said:
Hi x1-pc7,
try this:
http://forum.xda-developers.com/showthread.php?t=787867
In Summary,
try to copy all your microsd contents somewhere else temporarily. e.g. your pc desk top
FORMAT you SD card as FAT or FAT32.
try the micro SD method.
sorry, i mis-read your post, you knew all that above...
To format your sd micro card, you would need a card reader to format your sd card.
card reader that handles the microsd, or put the micro sd into a sd card adapter, usually provided with the microsd card, and put this into a sd card reader.
Hope this helps!!
Have a Happy New Year!!
Click to expand...
Click to collapse
Listen. I said that my micro SD does not get recognized by my computer. I have an adapter, but my computer won't recognize it. Read the whole post, and please show me where it talks about how to use the USB method to flash because the micro SD method will absolutely not work for me.
Thanks.
Happy New Year to you too.
usb method is simple
just turn device off.push the volume bottom in(& keep it in) then push power & keep both in until bootloader screen appears.then connect to usb.run Xperia Software Upgrade...Done!
x1-pc7 said:
Listen. I said that my micro SD does not get recognized by my computer. I have an adapter, but my computer won't recognize it. Read the whole post, and please show me where it talks about how to use the USB method to flash because the micro SD method will absolutely not work for me.
Click to expand...
Click to collapse
You could try to change your USB to PC setting to "Disk Drive" (Start » Settings » Connections). This way your phone will only show your microSD card instead of both internal memory and SD contents.
See if that enables you to format your SD card.
x1-pc7 said:
For some reason, this PNY card isn't being recognized by my computer, so I can't reformat it with my computer.
Click to expand...
Click to collapse
Not even without the X1, i.e. when using only your adapter?
Sounds like either the card or the adapter is broken - any chance to cross-check with another card/another PC?
Make sure your adapter can handle the card: (µ)SDHC cannot be read by older (µ)SD adapters....
Need some help pls. I formatted my SD card, inserted in the phone, came into boot loader mode, but no onscreen instuctions. Am I suppsed to run the upgrade sofeware becos the error from there is my phone is corrupted.
julyjat said:
Need some help pls. I formatted my SD card, inserted in the phone, came into boot loader mode, but no onscreen instuctions. Am I suppsed to run the upgrade sofeware becos the error from there is my phone is corrupted.
Click to expand...
Click to collapse
Are you trying to flash your phone? If you do, have you copy the new ROM to the SD card? (in root, not in any folder) And rename the ROM to "KOVSimg.nbh"
Then the boot loader mode will detect the ROM and show instructions.
However, if you're not trying to flash your phone, you don't need to enter the boot loader mode. Just do battery pull, and start your phone normally.
not dev related, therefore moved to q&a

Damaged SD Card

Hi guys,
When today I tried to xfer some files to my SD Card, during the process, the xfering hanged and I unmounted the SD.
Afterwhich, I mount it again and xfered the files to my SD Card.
After unmounting it, my phone prompts that my SD Card is damaged and needed to be reformated.
After reformating, I try to xfer the file again, and after unmounting it, it prompts that my SD Card is damaged again.
Anyway to fix this?
Your help would be much appreciated as I cant flash roms or kernels thru CWM on my phone anymore =(
Maybe the SD was really damaged (hardware fault) when the xfer failed? Also, try physically ejecting and then plugging in.
Once I received SD error and asking me to reformat it. I could not remount it as the system itself unmounted it. Rebooting didn't help... I tried the eject and plug (hot swap) and it was all well with all data intact.

[Q] Damaged SD card

Hi guys,
I tried partitioning my external sd card to linux swap, and something must have gone wrong. Now,a notification on my Galaxy S reads "Damaged SD card - SD card damaged. You may have to reformat it." This was the first thing I tried, but the Internal SD is formatted instead when I try. (Rom bug?). When i mount my phone via USB, only the formatted (damnit) internal SD is found.
I'm currently on TiramiSlim (best rom!!) with Devil 0.94. If you have any help it would be appreciated, any further questions don't hesitate!
yahoo907
In first i think that partition ext sd card is useless but it's my opinion.
In fact if you want to recover your ext sd i advise you to reformat your sd card with the windows disk utility: you select all volumes, delete them and recreate a new one with ntfs format (android will do his work when you'll insert your sd in the device).
If it doesn't work try to make the same but with a Linux system (Linux is powerful ^^).
Please reply me your results.
Have you tried to format the SD card with an SD Adapter & then make sure that USB debug is enabled on the device.
I had this issue.
Sometimes it shows that the card is damaged & then it reads it later on!
I plugged the Card into my Digi-Cam Formatted it.
Changed the Rom.
Now it works.
Anyways safely remove the drive when plugged into a computer!
i don't have an sd-card adapter unfortunately, the only way i can plug it in is via my phone. I cannot seem to find a disk utility on windows that will read the external sd, i can only find the internal from my computer.
i will try and get hold of an sd-adapter and let you know if it works
fixed the problem!
yahoo907 said:
fixed the problem!
Click to expand...
Click to collapse
how did you fix the problem?
My phone recognizes the internal storage but i keep getting "sd card is damaged, try reformatting it" in the notification bar.
when I click on format, it says "unmounting sd card" but nothing happens.
Thanks,
Luke
*edit.. nvm.
I put my SD card in my old x10 and in settings/storage I erased my SD card.
Works fine now

[Q] Captivate - cannot see SD card

Samsung i897- given to me used, Original owner said never used the sd card slot as it never came with one.
I hit flash to stock from the phone menu, it is at O/S version 2.2.
I am trying a sandisk micro sdhc 8 gb.
I put the card in the phone, the external sd was/is greyed out for mount and format.
I tried the disc in my pc and it read as fat, so I reformatted it as fat, and it still does not show in the phone.
I tried putting files on it when connected to the pc, and it worked.
Can anyone tell me what I am doing wrong? Is this a common problem for this phone? Does the card need to be named something special? I looked in the manual and cannot even find what format the card should be (fat,ext4 etc).
Thanks in advance.
Kilbert said:
Samsung i897- given to me used, Original owner said never used the sd card slot as it never came with one.
I hit flash to stock from the phone menu, it is at O/S version 2.2.
I am trying a sandisk micro sdhc 8 gb.
I put the card in the phone, the external sd was/is greyed out for mount and format.
I tried the disc in my pc and it read as fat, so I reformatted it as fat, and it still does not show in the phone.
I tried putting files on it when connected to the pc, and it worked.
Can anyone tell me what I am doing wrong? Is this a common problem for this phone? Does the card need to be named something special? I looked in the manual and cannot even find what format the card should be (fat,ext4 etc).
Thanks in advance.
Click to expand...
Click to collapse
OK so,
Tried Formatting the sd as NTFS? what kernel do you have? what compilation of froyo do you have?
External SD is mounted as vfat.
Can you see the SD card by using a usb adaptor outside of the phone? If not, try another card. If yes, format it there as a fat and try again in phone.
Sent from my SGH-I897

Categories

Resources